HUAWEI-CPE-MGMT-MIB
AI MIB Summary
The HUAWEI-CPE-MGMT-MIB enables SNMP-based remote management and monitoring of Huawei Customer Premises Equipment (CPE) devices, specifically facilitating the retrieval of operational status, configuration parameters, and performance metrics for broadband access sessions and system resources.
huawei cpe management mib.
Main OID:
hwCpeMgmt.1.3.6.1.4.1.2011.6.106
32
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
hwCpeMgmthuawei cpe management mib. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.106 |
hwCpeMgmtPara OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.106.1 |
hwCpeMgmtIpAddrIP address of CPE terminal.
DSLAM uses this IP address to connect to CPE terminal.rw IpAddress .1.3.6.1.4.1.2011.6.106.1.1 |
hwCpeMgmtVpiVPI of terminal management channel.
It is necessary to config VPI/VCI value when establish management channel.rw INTEGER .1.3.6.1.4.1.2011.6.106.1.2 |
hwCpeMgmtVciVCI of terminal management channel.
It is necessary to config VPI/VCI value when establish management channel.rw INTEGER .1.3.6.1.4.1.2011.6.106.1.3 |
hwCpeMgmtDslamVlanVLAN ID of DSLAM's VLAN interface.
It is necessary to config VLAN ID value when establish management channel.rw INTEGER .1.3.6.1.4.1.2011.6.106.1.4 |
hwCpeMgmtCpeVlanVLAN ID of VDSL CPE's management VLAN.
It is necessary to config VLAN ID value when establish management channel.rw INTEGER .1.3.6.1.4.1.2011.6.106.1.5 |
hwCpeMgmtFlowTypeFlow type of VDSL CPE's management VLAN.
1 cpevlan
2 vlanethertype
3 vlan8021prw Enumeration .1.3.6.1.4.1.2011.6.106.1.6 |
hwCpeMgmtFlowParaFlow parameter of VDSL CPE's management flow.
hwCpeMgmtFlowTypeȡֵΪ1(cpevlan)ʱڵȡֵЧ
hwCpeMgmtFlowTypeȡֵΪ2(vlanethertype)ʱڵΪûװͣȡֵΧΪ1 pppoe2 ipoe
hwCpeMgmtFlowTypeȡֵΪ3(vlan8021p)ʱڵΪ802.1pûȼȡֵΧΪ07rw INTEGER .1.3.6.1.4.1.2011.6.106.1.7 |
hwCpeSelect OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.106.2 |
hwCpeFrameIndexTerminal's frame IDrw INTEGER .1.3.6.1.4.1.2011.6.106.2.1 |
hwCpeSlotIndexTerminal's slot IDrw INTEGER .1.3.6.1.4.1.2011.6.106.2.2 |
hwCpePortIndexTerminal's port IDrw INTEGER .1.3.6.1.4.1.2011.6.106.2.3 |
hwCpeMgmtOperOperation of terminal management:
1 - terminal management start
2 - terminal management end
NMS starts telnet to CPE terminal from here.
User only need Start operation if he want to telnet to CPE terminal.
User need both Start operation and Stop operation if he want to update files to CPE terminal.rw Enumeration .1.3.6.1.4.1.2011.6.106.2.4 |
hwBatchCpeSelectTableCpe Batch Management Table(the max record number is 1024) SEQUENCE OF HwBatchCpeSelectEntry .1.3.6.1.4.1.2011.6.106.4 |
hwBatchCpeSelectEntryCpe Batch Management Table Entity HwBatchCpeSelectEntry .1.3.6.1.4.1.2011.6.106.4.1 |
hwBatchCpeFrameIndexTerminal's frame ID
նڵĿ INTEGER .1.3.6.1.4.1.2011.6.106.4.1.1 |
hwBatchCpeSlotIndexTerminal's slot ID
նڵIJλ INTEGER .1.3.6.1.4.1.2011.6.106.4.1.2 |
hwBatchCpePortIndexTerminal's port ID
նڵĶ˿ں INTEGER .1.3.6.1.4.1.2011.6.106.4.1.3 |
hwBatchCpeidTerminal's ID
նid,ontid,0-63 INTEGER .1.3.6.1.4.1.2011.6.106.4.1.4 |
hwBatchCpeAdminStatusTerminal's current loading status
ն˵ǰļ״̬
ܿͨѯҶ˽ǰضն˵ļ״̬
Load result:
1 - prepare to load
2 - loading
3 - loadsuccess
4 - loadfail
DSLAM return loading result to NMS by this node.
ؽ
1 -
2 -ڼ
3 -سɹ
4 -ʧro Enumeration .1.3.6.1.4.1.2011.6.106.4.1.5 |
hwBatchCpeRowStatusOperation of terminal management:
ն˹
createAndGo(4), - Ѵն˼ն
delete(6) - ѴնƳն
ͨ createAndGo ննС
Ѿstartٰն˼Ƴնrw Enumeration .1.3.6.1.4.1.2011.6.106.4.1.6 |
hwBatchCpeLoadProgressdisplay ont load progress
ONTؽȲѯ
ȡֵ[0, 100]ro INTEGER .1.3.6.1.4.1.2011.6.106.4.1.7 |
hwCpeLoadServerIpAddrServer IP address.
DSLAM download files from this server.rw IpAddress .hwCpeUpgrade.1 |
hwCpeLoadProtocolLoad protocol:
1 - TFTP mode
2 - FTP mode
3 - SFTP mode
4 - Other mode
User can choose TFTP,FTP or SFTP mode to transfer files.
The third transfer mode is used to extend.rw Enumeration .hwCpeUpgrade.2 |
hwCpeLoadFileNameName of file to be loaded.
Absolute path is needed if the file is not in the default path of FTP/TFTP server.rw OCTET STRING .hwCpeUpgrade.3 |
hwCpeLoadUserNameUser name,use to visit FTP server.
User name is not needed if TFTP protocol is used.
This value will be discarded if TFTP protocol is used.rw OCTET STRING .hwCpeUpgrade.4 |
hwCpeLoadPasswordPassword,use to visit FTP server.
Password is not needed if TFTP protocol is used.
This value will be discarded if TFTP protocol is used.rw OCTET STRING .hwCpeUpgrade.5 |
hwCpeLoadAdminStatusLoad operation
1 - Start loading operation
2 - Stop loading operation
NMS start update files from here.rw Enumeration .hwCpeUpgrade.6 |
hwCpeLoadOperStatusLoad result:
1 - No load operation
2 - Wait to load
3 - Geting to dslam
4 - Putting to cpe
5 - Get to dslam fail
6 - Put to cpe fail
DSLAM return loading result to NMS by this node.ro Enumeration .hwCpeUpgrade.7 |
hwCpeLoadFileTypeFile Type:
1 - software of CPE
2 - configuration file
3 - other file
ؽ
1 - ļ
2 - ļ
3 - ļrw Enumeration .hwCpeUpgrade.8 |
hwCpeLoadServerPortCpe load server port in SFTP mode
Default: 22rw INTEGER .hwCpeUpgrade.9 |