HUAWEI-COMMTEST-MIB
AI MIB Summary
The HUAWEI-COMMTEST-MIB enables remote management of copper twisted-pair line diagnostics on Huawei service boards by executing metallic line tests (MELT), querying test results and calibration data, and controlling searching tone operations to verify physical layer connectivity integrity.
This MIB is used for Metallic line test(MELT).Melt test is a common line status test method,used to test whether the copper twisted pair from the service board to the phone set is normal. Common MELT operations include starting a MELT test, querying the test result, querying the calibration data, and starting and stopping a searching tone test.
Main OID:
hwTestCommon.1.3.6.1.4.1.2011.6.21.1
385
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
385 total| Object Name |
|---|
hwTest OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21 |
hwTestCommonThis MIB is used for Metallic line test(MELT).Melt test is a
common line status test method,used to test whether the copper
twisted pair from the service board to the phone set is normal.
Common MELT operations include starting a MELT test, querying
the test result, querying the calibration data, and starting
and stopping a searching tone test. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.21.1 |
hwTestCommonMib OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.1 |
hwTestCommonMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.1.1 |
hwTestGroupOprTableTable of the test group:
It provides the number of the test group to which a shelf of the device corresponds.
It is uniquely identified by the number of the test group. Multiple shelves can share
a test board.
A test group corresponds to a test board. The number of a test group is the same as
the number of the shelf that houses the test board to which the test group corresponds.
The index of this table is hwTestGroupNo. SEQUENCE OF HwTestGroupOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.1 |
hwTestGroupOprEntryTable of the test group:
It provides the number of the test group to which a shelf of the device corresponds.
It is uniquely identified by the number of the test group. Multiple shelves can share
a test board.
A test group corresponds to a test board. The number of a test group is the same as
the number of the shelf that houses the test board to which the test group corresponds.
The index of this entry is hwTestGroupNo. HwTestGroupOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.1.1 |
hwTestGroupNoTest group number. The MD5500 supports the number that ranges from 0 to 240.
The MA5100 supports the number that ranges from 0 to 4.
The MA5300 supports the number that ranges from 0 to 63. Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.1.1.1 |
hwTestBoardIfIndexTest board IfIndex.rw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.1.1.2 |
hwTestGroupAssistIfIndexTestGroupAssist port IfIndex.rw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.1.1.3 |
hwTestGroupAssistTelNoAssistant telephone number.
The maximum length is 16 Octets.rw OCTET STRING .1.3.6.1.4.1.2011.6.21.1.1.1.1.1.4 |
hwTestGroupRowStatusPresent operation status of a row.
Options:
1. active(1), -the present operation status of the row is active
2. notInService(2), -the present operation status of the row is notInService
3. notReady(3), -the present operation status of the row is notReady
4. createAndGo(4), -the present operation status of the row is createAndGo
5. createAndWait(5), -the present operation status of the row is createAndWait
6. destroy(6) -the present operation status of the row is destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.1.1.5 |
hwLoopLineTestOprTableThis table is used for enabling a subscriber line test and obtaining the test result
after a test is complete. The subscriber line test function can be used for obtaining
the performance information about a subscriber line, such as capacity and resistance.
Users can learn about the conditions of the line by comparing such information with
standard data.
The index of this table is ifindex. SEQUENCE OF HwLoopLineTestOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.2 |
hwLoopLineTestOprEntryThis table is used for enabling a subscriber line test and obtaining the test result
after a test is complete. The subscriber line test function can be used for obtaining
the performance information about a subscriber line, such as capacity and resistance.
Users can learn about the conditions of the line by comparing such information with
standard data.
The index of this entry is ifindex. HwLoopLineTestOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.2.1 |
hwLoopLineTestOprTypeMELT operation type
Options:
1. stop(1) -stop a MELT test
2. start(2) -start a MELT test
3. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.1 |
hwLoopLineTestVoltageIndicates whether a voltage exists on the line under test.
Options:
1. notest(1) -the voltage does not exist on the line under test
2. test(2) -the voltage exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.2 |
hwLoopLineTestResistanceIndicates whether resistance exists on the line under test.
Options:
1. notest(1) -resistance does not exist on the line under test
2. test(2) -resistance exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.3 |
hwLoopLineTestCapacitanceIndicates whether capacitance exists on the line under test.
Options:
1. notest(1) -capacitance does not exist on the line under test
2. test(2) -capacitance exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.4 |
hwLoopLineTestLoopResistanceIndicates whether loop resistance exists on the line under test.
Options:
1. notest(1) -loop resistance does not exist on the line under test
2. test(2) -loop resistance exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.5 |
hwLoopLineTestPoleResistanceIndicates whether pole resistance exists on the line under test.
Options:
1. notest(1) -Pole resistance does not exist on the line under test
2. test(2) -Pole resistance exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.6 |
hwLoopLineTestBusyProcFlagIdentify whether to start a test when the line is busy. The system will excecute a corresponding
operation according to the configuration that a user specifies, for example, to cancel the test or to force to test.
Options:
1. busyNoTest(1) -perform no test when a port is busy
2. busyTest(2) -perform a remedy test when a port is busy
3. busystrenTest(3) -force to test when a port is busy
4. deferredTest(4) -defer a test when a port is busy
5. invalid(-1) -invalid value
Default: busyTest(1)
If the value of this leaf is deferredTest(4), both hwLoopLineTestDeferredTime and
hwLoopLineTestTimeoutProc must be set.rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.7 |
hwLoopLineTestStatusIndicates the result of MELT test.
Options:
1. normal(1) -the MELT test is successful
2. testFail(2) -the MELT test fails
3. portBusy(3) -the MELT test port is busy
4. testOutOfTime(4) -the MELT test times out
5. testingAbnormal(5) -the MELT test is abnormal
6. broadbandtesting(6)-the MELT test is broadbandtesting
7. capturefail(7) -the MELT test fails to capture
8. notratb(8) -the relay transfer board of the MELT test does not exist
9. testcanceled(9) -the MELT test is canceled
10. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.8 |
hwLoopLineTestConclusionMELT test conclusion
Options:
1. normal(1) -the test conclusion is normal
2. meetLine(2) -the test conclusion is meetLine
3. aLineMix(3) -the test conclusion is aLineMix
4. bLineMix(4) -the test conclusion is bLineMix
5. doubleMix(5) -the test conclusion is doubleMix
6. aLineEarth(6) -the test conclusion is aLineEarth
7. bLineEarth(7) -the test conclusion is bLineEarth
8. doublelineearth(8) -the test conclusion is doublelineearth
9. selfMix(9) -the test conclusion is selfMix
10. abLine(10) -the test conclusion is abLine
11. aLineFree(11) -the test conclusion is aLineFree
12. bLineEarthFree(12) -the test conclusion is bLineEarthFree
13. doubleLineEarthFree(13) -the test conclusion is doubleLineEarthFree
14. abLineFree(14) -the test conclusion is abLineFree
15. killLine(15) -the test conclusion is killLine
16. noPutDownTele(16) -the test conclusion is noPutDownTele
17. unknow(17) -the test conclusion is unknow
18. selfMixinMDF(18) -the test conclusion is selfMixinMDF
19. selfMixoutMDF(19) -the test conclusion is selfMixoutMDF
20. cutLineinMDF(20) -the test conclusion is cutLineinMDF
21. cutLineoutMDF(21) -the test conclusion is cutLineoutMDF
22. dCvoltagePowerFeed(30) -the test conclusion is dCvoltagePowerFeed
23. aCvoltageRinging(31) -the test conclusion is aCvoltageRinging
24. dCvoltageOffhook(32) -the test conclusion is dCvoltageOffhook
25. dCvoltage(33) -the test conclusion is dCvoltage
26. aCvoltage(34) -the test conclusion is aCvoltage
27. abImpedance(35) -the test conclusion is abImpedance
28. baImpedance(36) -the test conclusion is baImpedance
29. agImpedance(37) -the test conclusion is agImpedance
30. bgImpedance(38) -the test conclusion is bgImpedance
31. agACCurrent(39) -the test conclusion is agACCurrent
32. bgACCurrent(41) -the test conclusion is bgACCurrent
33. abACCurrent(42) -the test conclusion is abACCurrent
34. agDCCurrent(43) -the test conclusion is agDCCurrent
35. bgDCCurrent(44) -the test conclusion is bgDCCurrent
36. abDCCurrent(45) -the test conclusion is abDCCurrent
37. loopCurrent(46) -the test conclusion is loopCurrent
38. noise(47) -the test conclusion is noise
39. abRFaultId(91) -the test conslusion is ab Line all fault
40. aRFaultId(92) -the test conslusion is a Line fault
41. bRFaultId(93) -the test conslusion is b Line fault
42. abLeakId(94) -the test conslusion is ab Line all leak
43. aLeakId(95) -the test conslusion is a Line leak
44. bLeakId(96) -the test conslusion is b line leak
45. abFvacLevelH(97) -the test conslusion is ab dangerous AC to ground
46. aFvacLevelH(98) -the test conslusion is a dangerous AC to ground
47. bFvacLevelH(99) -the test conslusion is b dangerous AC to ground
48. abFvacLevelI(100) -the test conslusion is ab EMF AC to ground
49. aFvacLevelI(101) -the test conslusion is a EMF AC to ground
50. bFvacLevelI(102) -the test conslusion is b EMF AC to ground
51. abFvacLevelO(103) -the test conslusion is ab other dangerous AC to ground
52. aFvacLevelO(104) -the test conslusion is a other dangerous AC to ground
53. bFvacLevelO(105) -the test conslusion is b other dangerous AC to ground
54. abFvDcLevelH(106) -the test conslusion is ab dangerous DC to ground
55. aFvDcLevelH(107) -the test conslusion is a dangerous DC to ground
56. bFvDcLevelH(108) -the test conslusion is b dangerous DC to ground
57. abFvDcLevelI(109) -the test conslusion is ab EMF DC to ground
58. aFvDcLevelI(110) -the test conslusion is a EMF DC to ground
59. bFvDcLevelI(111) -the test conslusion is b EMF DC to ground
60. abFvDcLevelO(112) -the test conslusion is ab other dangerous DC to ground
61. aFvDcLevelO(113) -the test conslusion is a other dangerous DC to ground
62. bFvDcLevelO(114) -the test conslusion is b other dangerous DC to ground
63. fesIdPPA(115) -the test conslusion is ab PPA
64. fesIdPPAInv(116) -the test conslusion is ab reverse PPA
65. fesId2PPA(117) -the test conslusion is ab two PPA
66. fesId2PPAInv(118) -the test conslusion is ab two reverse PPA
67. etsiXdslSignature(119) -the test conslusion is ETSI XDSL Signature
68. fetIdEr(120) -the test conslusion is exist electronic ring terminal
69. abreak(121) -the test conslusion is a line break
70. bbreak(122) -the test conslusion is b line break
71. abreakInMDF(123) -the test conslusion is a line break InMDF
72. bbreakInMDF(124) -the test conslusion is b line break InMDF
73. abreakOutMDF(125) -the test conslusion is a line break OutMDF
74. bbreakOutMDF(126) -the test conslusion is b line break OutMDF
75. invalid(-1) -the test conclusion is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.9 |
hwLoopLineTestACAGIndicates the A->ground AC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.10 |
hwLoopLineTestACBGIndicates the B->ground AC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.11 |
hwLoopLineTestACABIndicates the A->B AC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.12 |
hwLoopLineTestDCAGIndicates the A->ground DC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.13 |
hwLoopLineTestDCBGIndicates the B->ground DC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.14 |
hwLoopLineTestDCABIndicates the A->B DC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.15 |
hwLoopLineTestRAGIndicates the A->ground insulation resistance.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.16 |
hwLoopLineTestRBGIndicates the B->ground insulation resistance.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.17 |
hwLoopLineTestRABIndicates the A->B insulation resistance.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.18 |
hwLoopLineTestCapAGIndicates the A->ground capacitance.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.19 |
hwLoopLineTestCapBGIndicates the B->ground capacitance.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.20 |
hwLoopLineTestCapABIndicates the A->B capacitance.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.21 |
hwLoopLineTestLRIndicates the loop resistance.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.22 |
hwLoopLineTestRABResPoleIndicates the A->B polarity reversal resistance.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.23 |
hwLoopLineTestMSocketIndicates the M-socket connection.
Options:
1. notconnected(1) -the M-socket is not connected
2. connected(2) -the M-socket is connected
3. aBReversed(3) -the wire A and wire B are reversedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.24 |
hwLoopLineTestBtssPowerProcFlagLoop line test-BTSS line with power processing.
Options:
1. noTest(1) -not test
2. test(2) -test
3. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.25 |
hwLoopLineTestImpedanceLoop line test-impedance.
Options:
1. notest(1) -not test
2. test(2) -testrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.26 |
hwLoopLineTestImpedanceABA->B impedance (unit: ohm)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.27 |
hwLoopLineTestImpedanceBAB->A impedance (unit: ohm)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.28 |
hwLoopLineTestImpedanceAGA->ground impedance (unit: ohm)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.29 |
hwLoopLineTestImpedanceBGB->ground impedance (unit: ohm)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.30 |
hwLoopLineTestCurrentLoop line test-current.
Options:
1. notest(1) -not test
2. test(2) -testrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.31 |
hwLoopLineTestACCurrentAGA->ground AC current (unit: mA)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.32 |
hwLoopLineTestACCurrentBGB->ground AC current (unit: mA)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.33 |
hwLoopLineTestACCurrentABAB AC current (unit: mA)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.34 |
hwLoopLineTestDCCurrentAGA->ground DC current (unit: mA)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.35 |
hwLoopLineTestDCCurrentBGB->ground DC current (unit: mA)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.36 |
hwLoopLineTestDCCurrentABAB DC current (unit: mA)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.37 |
hwLoopLineTestLoopCurrentLoop line test-loop current.
Options:
1. notest(1) -not test
2. test(2) -testrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.38 |
hwLoopLineTestLCLoop current (unit: uA)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.39 |
hwLoopLineTestNoiseLoop line test-noise.
Options:
1. notest(1) -not test
2. test(2) -testrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.40 |
hwLoopLineTestNNoise (unit: dBm)ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.41 |
hwLoopLineTestPPAIndicates whether PPA exists on the line under test.
Options:
1. notest(1) -PPA does not exist on the line under test
2. test(2) -PPA exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.42 |
hwLoopLineTestPPAResultIndicates whether the PPA exists.
Options:
1. noexist(1) -PPA does not exist
2. exist(2) -PPA exists
3. inverseexist(3) -PPA inverse exists
4. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.43 |
hwLoopLineTestDeferredTimeIndicates the deferred time.
Unit: minute
This leaf is valid only when the value of hwLoopLineTestBusyProcFlag is DeferredTest(4).
Default: 30rw Integer32(-1 | 1..1440) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.44 |
hwLoopLineTestTimeoutProcIndicates the timeout processing.
Options:
1. notest(1) -if the deferred time times out and the port is still busy
the test will be canceled
2. test(2) -if the deferred time times out and the port is still busy
the test will be forcedly started
3. invalid(-1) -invalid value
This leaf is valid only when the value of hwLoopLineTestBusyProcFlag is DeferredTest(4).rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.45 |
hwLoopLineTestReverseReverse flag (0:normal test 1:reverse test)rw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.46 |
hwLoopLineTestUtgAcFreqFrequency of foreign AC voltage source coupled to tip via Zbat_tip impedance.
Unit: Hzro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.47 |
hwLoopLineTestUrgAcFreqFrequency of foreign AC voltage source coupled to ring via Zbat_ring impedance.
Unit:Hzro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.48 |
hwLoopLineTestUtrAcFreqFrequency of foreign AC voltage source coupled to tip-ring via Zbat_tipring impedance.
Unit:Hzro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.49 |
hwLoopLineTestItipAcAC foreign current on the tip wire.
Unit:uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.50 |
hwLoopLineTestIringAcAC foreign current on the ring wire.
Unit:uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.51 |
hwLoopLineTestItipDcDC foreign current on the tip wire.
Unit:uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.52 |
hwLoopLineTestIringDcDC foreign current on the ring wire.
Unit:uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.53 |
hwLoopLineTestRbattipIn presence of a foreign voltage, the equivalent coupling resistance of wire A.
Unit:ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.54 |
hwLoopLineTestRbatringIn presence of a foreign voltage, the equivalent coupling resistance of wire B.
Unit:ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.55 |
hwLoopLineTestRringResistance in series with the ring capacitance, for example
when a ringer load or a passive R-C signature terminates the loop.
It also includes the cable resistance R line but it does not include
the 24 k feeding resistance.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.56 |
hwLoopLineTestCsigCapacitance of an xDSL signal.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.57 |
hwLoopLineTestVzenerZener diode threshold in the case of an off-hook phone.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.58 |
hwLoopLineTestRzenerDC tip-ring resistance measured in the case of an off-hook phone.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.59 |
hwLoopLineTestGtgAggregate a->ground conductance.
Unit: nSro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.60 |
hwLoopLineTestBtgAggregate a->ground susceptance.
Unit: nSro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.61 |
hwLoopLineTestGrgAggregate b->ground conductance.
Unit: nSro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.62 |
hwLoopLineTestBrgAggregate b->ground susceptance.
Unit: nSro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.63 |
hwLoopLineTestGtrAggregate a->b conductance.
Unit: nSro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.64 |
hwLoopLineTestBtrAggregate a->b susceptance.
Unit: nSro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.65 |
hwLoopLineTestSIGNIndicates the ETSI xDSL Signature is detected or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.66 |
hwLoopLineTestACFEMIndicates the presence of an AC foreign voltage above the threshold defined by ACFEMmin.
By reading the results of the foreign voltage test, it is possible to determine
whether the foreign electromotive force source has been coupled to tip, ring or
differentially between tip-ring.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.67 |
hwLoopLineTestDCFEMIndicates the presence of a DC foreign voltage above the threshold defined
by DCFEMmin. By reading the results of the foreign voltage test,
it is possible to determine whether the foreign electromotive
force source has been coupled to tip, ring or differentially between tip-ring.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.68 |
hwLoopLineTestONHKIndicates the presens of a phone in the on-hook state.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.69 |
hwLoopLineTestOPENIndicates a->b resistance exceeds the threshold.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.70 |
hwLoopLineTestSHORTIndicates that the insulation resistance is small.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.71 |
hwLoopLineTestROHIndicates a phone in the off-hook state.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.72 |
hwLoopLineTestUtgDcUpIndicates the a->ground highest measurement DC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.73 |
hwLoopLineTestUtgDcDownIndicates the a->ground lowest measurement DC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.74 |
hwLoopLineTestUrgDcUpIndicates the b->ground highest measurement DC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.75 |
hwLoopLineTestUrgDcDownIndicates the b->ground lowest measurement DC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.76 |
hwLoopLineTestUtrPosIndicates the a->b positive measurement DC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.77 |
hwLoopLineTestUtrNegIndicates the b->a measurement DC voltage.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.78 |
hwLoopLineTestItgDcUpIndicates the current mapping the A-wire highest voltage for test.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.79 |
hwLoopLineTestItgDcDownIndicates the current mapping the A-wire lowest voltage for test.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.80 |
hwLoopLineTestIrgDcUpIndicates the current mapping the B-wire highest voltage for test.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.81 |
hwLoopLineTestIrgDcDownIndicates the current mapping the B-wire lowest voltage for test.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.82 |
hwLoopLineTestItrPosIndicates the current mapping the A->B positive voltage for test.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.83 |
hwLoopLineTestItrNegIndicates the current mapping the A->B negative voltage for test.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.84 |
hwLoopLineTestRingerIndicates the detected ringer.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.85 |
hwLoopLineTestPPAResIndicates the resistance of PPA.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.86 |
hwLoopLineTestStartTimeIndicates the start time and date of the MELT test.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.87 |
hwLoopLineTestEndTimeIndicates the end time and date of the MELT test.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.88 |
hwLoopLineTestOprMeasuredFreqIndicates the measured frequency for complex impedance.
Options:
1. frequency25Hz(0) -25 Hz
2. frequency275Hz(1) -275 Hz
3. invalid(-1) -invalid value
Default: frequency25Hz(0)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.89 |
hwLoopLineTestIfIndexPort IfIndex.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.90 |
hwLoopLineTestRequestIDRequest ID.
The value is the fourth parameter in the trap message.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.91 |
hwLoopLineTestRABPoleIndicates the A->B polarity resistance.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.92 |
hwLoopLineTestACAGFlagIndicates whether the value of hwLoopLineTestACAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACAG is valid
2. invalid(2) -the value of hwLoopLineTestACAG is invalid
3. notsupport(3) -the value of hwLoopLineTestACAG is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.93 |
hwLoopLineTestACBGFlagIndicates whether the value of hwLoopLineTestACBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACBG is valid
2. invalid(2) -the value of hwLoopLineTestACBG is invalid
3. notsupport(3) -the value of hwLoopLineTestACBG is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.94 |
hwLoopLineTestACABFlagIndicates whether the value of hwLoopLineTestACAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACAB is valid
2. invalid(2) -the value of hwLoopLineTestACAB is invalid
3. notsupport(3) -the value of hwLoopLineTestACAB is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.95 |
hwLoopLineTestDCAGFlagIndicates whether the value of hwLoopLineTestDCAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCAG is valid
2. invalid(2) -the value of hwLoopLineTestDCAG is invalid
3. notsupport(3) -the value of hwLoopLineTestDCAG is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.96 |
hwLoopLineTestDCBGFlagIndicates whether the value of hwLoopLineTestDCBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCBG is valid
2. invalid(2) -the value of hwLoopLineTestDCBG is invalid
3. notsupport(3) -the value of hwLoopLineTestDCBG is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.97 |
hwLoopLineTestDCABFlagIndicates whether the value of hwLoopLineTestDCAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCAB is valid
2. invalid(2) -the value of hwLoopLineTestDCAB is invalid
3. notsupport(3) -the value of hwLoopLineTestDCAB is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.98 |
hwLoopLineTestRAGFlagIndicates whether the value of hwLoopLineTestRAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRAG is valid
2. invalid(2) -the value of hwLoopLineTestRAG is invalid
3. notsupport(3) -the value of hwLoopLineTestRAG is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.99 |
hwLoopLineTestRBGFlagIndicates whether the value of hwLoopLineTestRBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRBG is valid
2. invalid(2) -the value of hwLoopLineTestRBG is invalid
3. notsupport(3) -the value of hwLoopLineTestRBG is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.100 |
hwLoopLineTestRABFlagIndicates whether the value of hwLoopLineTestRAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRAB is valid
2. invalid(2) -the value of hwLoopLineTestRAB is invalid
3. notsupport(3) -the value of hwLoopLineTestRAB is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.101 |
hwLoopLineTestRABPoleFlagIndicates whether the value of hwLoopLineTestRABPole is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRABPole is valid
2. invalid(2) -the value of hwLoopLineTestRABPole is invalid
3. notsupport(3) -the value of hwLoopLineTestRABPole is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.102 |
hwLoopLineTestRABResPoleFlagIndicates whether the value of hwLoopLineTestRABResPole is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRABResPole is valid
2. invalid(2) -the value of hwLoopLineTestRABResPole is invalid
3. notsupport(3) -the value of hwLoopLineTestRABResPole is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.103 |
hwLoopLineTestCapAGFlagIndicates whether the value of hwLoopLineTestCapAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapAG is valid
2. invalid(2) -the value of hwLoopLineTestCapAG is invalid
3. notsupport(3) -the value of hwLoopLineTestCapAG is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.104 |
hwLoopLineTestCapBGFlagIndicates whether the value of hwLoopLineTestCapBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapBG is valid
2. invalid(2) -the value of hwLoopLineTestCapBG is invalid
3. notsupport(3) -the value of hwLoopLineTestCapBG is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.105 |
hwLoopLineTestCapABFlagIndicates whether the value of hwLoopLineTestCapAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapAB is valid
2. invalid(2) -the value of hwLoopLineTestCapAB is invalid
3. notsupport(3) -the value of hwLoopLineTestCapAB is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.106 |
hwLoopLineTestRbattipFlagIndicates whether the value of hwLoopLineTestRbattip is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRbattip is valid
2. invalid(2) -the value of hwLoopLineTestRbattip is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.107 |
hwLoopLineTestRbatringFlagIndicates whether the value of hwLoopLineTestRbatring is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRbatring is valid
2. invalid(2) -the value of hwLoopLineTestRbatring is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.108 |
hwLoopLineTestRringFlagIndicates whether the value of hwLoopLineTestRring is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRring is valid
2. invalid(2) -the value of hwLoopLineTestRring is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.109 |
hwLoopLineTestCsigFlagIndicates whether the value of hwLoopLineTestCsig is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCsig is valid
2. invalid(2) -the value of hwLoopLineTestCsig is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.110 |
hwLoopLineTestPPAResFlagIndicates whether the value of hwLoopLineTestPPARes is valid.
Options:
1. valid(1) -the value of hwLoopLineTestPPARes is valid
2. invalid(2) -the value of hwLoopLineTestPPARes is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.111 |
hwLoopLineTestVzenerFlagIndicates whether the value of hwLoopLineTestVzener is valid.
Options:
1. valid(1) -the value of hwLoopLineTestVzener is valid
2. invalid(2) -the value of hwLoopLineTestVzener is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.112 |
hwLoopLineTestRzenerFlagIndicates whether the value of hwLoopLineTestRzener is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRzener is valid
2. invalid(2) -the value of hwLoopLineTestRzener is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.113 |
hwLoopLineTestSNMPRabIndicates the A to B resistance (insulation resistance).
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.114 |
hwLoopLineTestSNMPRabFlagIndicates whether the value of hwLoopLineTestSNMPRab is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSNMPRab is valid
2. invalid(2) -the value of hwLoopLineTestSNMPRab is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.115 |
hwLoopLineTestSNMPRbaIndicates the B to A resistance (insulation resistance).
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.116 |
hwLoopLineTestSNMPRbaFlagIndicates whether the value of hwLoopLineTestSNMPRba is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSNMPRba is valid
2. invalid(2) -the value of hwLoopLineTestSNMPRba is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.117 |
hwLoopLineTestPPAResultFlagIndicates whether the value of hwLoopLineTestPPA is valid.
Options:
1. valid(1) -the value of hwLoopLineTestPPA is valid
2. invalid(2) -the value of hwLoopLineTestPPA is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.118 |
hwLoopLineTestUtgAcFreqFlagIndicates whether the value of hwLoopLineTestUtgAcFreq is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgAcFreq is valid
2. invalid(2) -the value of hwLoopLineTestUtgAcFreq is invalid
3. notsupport(3) -the value of hwLoopLineTestUtgAcFreq is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.119 |
hwLoopLineTestUrgAcFreqFlagIndicates whether the value of hwLoopLineTestUrgAcFreq is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgAcFreq is valid
2. invalid(2) -the value of hwLoopLineTestUrgAcFreq is invalid
3. notsupport(3) -the value of hwLoopLineTestUrgAcFreq is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.120 |
hwLoopLineTestUtrAcFreqFlagIndicates whether the value of hwLoopLineTestUtrAcFreq is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrAcFreq is valid
2. invalid(2) -the value of hwLoopLineTestUtrAcFreq is invalid
3. notsupport(3) -the value of hwLoopLineTestUtrAcFreq is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.121 |
hwLoopLineTestItipAcFlagIndicates whether the value of hwLoopLineTestItipAc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItipAc is valid
2. invalid(2) -the value of hwLoopLineTestItipAc is invalid
3. notsupport(3) -the value of hwLoopLineTestItipAc is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.122 |
hwLoopLineTestIringAcFlagIndicates whether the value of hwLoopLineTestIringAc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIringAc is valid
2. invalid(2) -the value of hwLoopLineTestIringAc is invalid
3. notsupport(3) -the value of hwLoopLineTestIringAc is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.123 |
hwLoopLineTestItipDcFlagIndicates whether the value of hwLoopLineTestItipDc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItipDc is valid
2. invalid(2) -the value of hwLoopLineTestItipDc is invalid
3. notsupport(3) -the value of hwLoopLineTestItipDc is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.124 |
hwLoopLineTestIringDcFlagIndicates whether the value of hwLoopLineTestIringDc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIringDc is valid
2. invalid(2) -the value of hwLoopLineTestIringDc is invalid
3. notsupport(3) -the value of hwLoopLineTestIringDc is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.125 |
hwLoopLineTestGtgFlagIndicates whether the value of hwLoopLineTestGtg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGtg is valid
2. invalid(2) -the value of hwLoopLineTestGtg is invalid
3. notsupport(3) -the value of hwLoopLineTestGtg is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.126 |
hwLoopLineTestBtgFlagIndicates whether the value of hwLoopLineTestBtg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBtg is valid
2. invalid(2) -the value of hwLoopLineTestBtg is invalid
3. notsupport(3) -the value of hwLoopLineTestBtg is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.127 |
hwLoopLineTestGrgFlagIndicates whether the value of hwLoopLineTestGrg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGrg is valid
2. invalid(2) -the value of hwLoopLineTestGrg is invalid
3. notsupport(3) -the value of hwLoopLineTestGrg is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.128 |
hwLoopLineTestBrgFlagIndicates whether the value of hwLoopLineTestBrg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBrg is valid
2. invalid(2) -the value of hwLoopLineTestBrg is invalid
3. notsupport(3) -the value of hwLoopLineTestBrg is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.129 |
hwLoopLineTestGtrFlagIndicates whether the value of hwLoopLineTestGtr is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGtr is valid
2. invalid(2) -the value of hwLoopLineTestGtr is invalid
3. notsupport(3) -the value of hwLoopLineTestGtr is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.130 |
hwLoopLineTestBtrFlagIndicates whether the value of hwLoopLineTestBtr is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBtr is valid
2. invalid(2) -the value of hwLoopLineTestBtr is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.131 |
hwLoopLineTestSIGNFlagIndicates whether the value of hwLoopLineTestSIGN is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSIGN is valid
2. invalid(2) -the value of hwLoopLineTestSIGN is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.132 |
hwLoopLineTestACFEMFlagIndicates whether the value of hwLoopLineTestACFEM is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACFEM is valid
2. invalid(2) -the value of hwLoopLineTestACFEM is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.133 |
hwLoopLineTestDCFEMFlagIndicates whether the value of hwLoopLineTestDCFEM is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCFEM is valid
2. invalid(2) -the value of hwLoopLineTestDCFEM is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.134 |
hwLoopLineTestONHKFlagIndicates whether the value of hwLoopLineTestONHK is valid.
Options:
1. valid(1) -the value of hwLoopLineTestONHK is valid
2. invalid(2) -the value of hwLoopLineTestONHK is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.135 |
hwLoopLineTestOPENFlagIndicates whether the value of hwLoopLineTestOPEN is valid.
Options:
1. valid(1) -the value of hwLoopLineTestOPEN is valid
2. invalid(2) -the value of hwLoopLineTestOPEN is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.136 |
hwLoopLineTestSHORTFlagIndicates whether the value of hwLoopLineTestSHORT is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSHORT is valid
2. invalid(2) -the value of hwLoopLineTestSHORT is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.137 |
hwLoopLineTestROHFlagIndicates whether the value of hwLoopLineTestROH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestROH is valid
2. invalid(2) -the value of hwLoopLineTestROH is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.138 |
hwLoopLineTestUtgDcUpFlagIndicates whether the value of hwLoopLineTestUtgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestUtgDcUp is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.139 |
hwLoopLineTestUtgDcDownFlagIndicates whether the value of hwLoopLineTestUtgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestUtgDcDown is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.140 |
hwLoopLineTestUrgDcUpFlagIndicates whether the value of hwLoopLineTestUrgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestUrgDcUp is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.141 |
hwLoopLineTestUrgDcDownFlagIndicates whether the value of hwLoopLineTestUrgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestUrgDcDown is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.142 |
hwLoopLineTestUtrPosFlagIndicates whether the value of hwLoopLineTestUtrPos is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrPos is valid
2. invalid(2) -the value of hwLoopLineTestUtrPos is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.143 |
hwLoopLineTestUtrNegFlagIndicates whether the value of hwLoopLineTestUtrNeg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrNeg is valid
2. invalid(2) -the value of hwLoopLineTestUtrNeg is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.144 |
hwLoopLineTestItgDcUpFlagIndicates whether the value of hwLoopLineTestItgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestItgDcUp is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.145 |
hwLoopLineTestItgDcDownFlagIndicates whether the value of hwLoopLineTestItgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestItgDcDown is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.146 |
hwLoopLineTestIrgDcUpFlagIndicates whether the value of hwLoopLineTestIrgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIrgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestIrgDcUp is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.147 |
hwLoopLineTestIrgDcDownFlagIndicates whether the value of hwLoopLineTestIrgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIrgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestIrgDcDown is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.148 |
hwLoopLineTestItrPosFlagIndicates whether the value of hwLoopLineTestItrPos is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItrPos is valid
2. invalid(2) -the value of hwLoopLineTestItrPos is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.149 |
hwLoopLineTestItrNegFlagIndicates whether the value of hwLoopLineTestItrNeg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItrNeg is valid
2. invalid(2) -the value of hwLoopLineTestItrNeg is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.150 |
hwLoopLineTestRingerFlagIndicates whether the value of hwLoopLineTestRinger is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRinger is valid
2. invalid(2) -the value of hwLoopLineTestRinger is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.151 |
hwLoopLineTestLRFlagIndicates whether the value of hwLoopLineTestLR is valid.
Options:
1. valid(1) -the value of hwLoopLineTestLR is valid
2. invalid(2) -the value of hwLoopLineTestLR is invalid
3. notsupport(3) -the value of hwLoopLineTestLR is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.152 |
hwLoopLineTestDcCurrentIndicates whether DcCurrent exists on the line under test.
Options:
1. notest(1) -DcCurrent does not exist on the line under test
2. test(2) -DcCurrent exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.153 |
hwLoopLineTestAcCurrentIndicates whether AcCurrent exists on the line under test.
Options:
1. notest(1) -AcCurrent does not exist on the line under test
2. test(2) -AcCurrent exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.154 |
hwLoopLineTestConductanceIndicates whether conductance exists on the line under test.
Options:
1. notest(1) -Conductance does not exist on the line under test
2. test(2) -Conductance exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.155 |
hwLoopLineTestSusceptanceIndicates whether susceptance exists on the line under test.
Options:
1. notest(1) -Susceptance does not exist on the line under test
2. test(2) -Susceptance exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.156 |
hwLoopLineTestAcfrequencyAIndicates status of Acfrequency in line A.
Options:
1. sixteenDotSix(1) -line A has ACFrequency 16.6
2. twentyFive(2) -line A has ACFrequency 25
3. fifty(3) -line A has ACFrequency 50
4. sixty(4) -line A has ACFrequency 60
5. unknown(5) -line A has unknown ACFrequency
6. invalid(-1) -invalid value
Unit: Hzro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.157 |
hwLoopLineTestAcfrequencyBIndicates status of Acfrequency in line A.
Options:
1. sixteenDotSix(1) -line A has ACFrequency 16.6
2. twentyFive(2) -line A has ACFrequency 25
3. fifty(3) -line A has ACFrequency 50
4. sixty(4) -line A has ACFrequency 60
5. unknown(5) -line A has unknown ACFrequency
6. invalid(-1) -invalid value
Unit: Hzro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.158 |
hwLoopLineTestCapABHIndicates the A->B capacitance.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.159 |
hwLoopLineTestCapABHFlagIndicates whether the value of hwLoopLineTestCapABH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapABH is valid
2. invalid(2) -the value of hwLoopLineTestCapABH is invalid
3. notsupport(3) -the value of hwLoopLineTestCapABH is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.160 |
hwLoopLineTestGtrHIndicates the A->B conductance.
Unit: nSro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.161 |
hwLoopLineTestGtrHFlagIndicates whether the value of hwLoopLineTestGtrH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGtrH is valid
2. invalid(2) -the value of hwLoopLineTestGtrH is invalid
3. notsupport(3) -the value of hwLoopLineTestGtrH is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.162 |
hwLoopLineTestBtrHIndicates the A->B susceptance.
Unit: nSro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.163 |
hwLoopLineTestBtrHFlagIndicates whether the value of hwLoopLineTestBtrH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBtrH is valid
2. invalid(2) -the value of hwLoopLineTestBtrH is invalid
3. notsupport(3) -the value of hwLoopLineTestBtrH is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.164 |
hwLoopLineTestABDcCurrentIndicates the A->B Dc current.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.165 |
hwLoopLineTestABDcCurrentFlagIndicates whether the value of hwLoopLineTestABDcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABDcCurrent is valid
2. invalid(2) -the value of hwLoopLineTestABDcCurrent is invalid
3. notsupport(3) -the value of hwLoopLineTestABDcCurrent is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.166 |
hwLoopLineTestBADcCurrentIndicates the B->A Dc current.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.167 |
hwLoopLineTestBADcCurrentFlagIndicates whether the value of hwLoopLineTestBADcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBADcCurrent is valid
2. invalid(2) -the value of hwLoopLineTestBADcCurrent is invalid
3. notsupport(3) -the value of hwLoopLineTestBADcCurrent is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.168 |
hwLoopLineTestABAcCurrentIndicates the A->B Ac current.
Unit: uArmsro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.169 |
hwLoopLineTestABAcCurrentFlagIndicates whether the value of hwLoopLineTestABAcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABAcCurrent is valid
2. invalid(2) -the value of hwLoopLineTestABAcCurrent is invalid
3. notsupport(3) -the value of hwLoopLineTestABAcCurrent is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.170 |
hwLoopLineTestBAAcCurrentIndicates the B->A Ac current.
Unit: uArmsro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.171 |
hwLoopLineTestBAAcCurrentFlagIndicates whether the value of hwLoopLineTestBAAcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBAAcCurrent is valid
2. invalid(2) -the value of hwLoopLineTestBAAcCurrent is invalid
3. notsupport(3) -the value of hwLoopLineTestBAAcCurrent is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.172 |
hwLoopLineTestCSfrequencyForTestIndicates the frequency for test capacitance and conductance.
Unit: Hzro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.173 |
hwLoopLineTestCSfrequencyForTestFlagIndicates whether the value of hwLoopLineTestCSfrequencyForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCSfrequencyForTest is valid
2. invalid(2) -the value of hwLoopLineTestCSfrequencyForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestCSfrequencyForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.174 |
hwLoopLineTestImpedanceForTestIndicates the resistance inputed in test abnormal voltage.
Unit:ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.175 |
hwLoopLineTestImpedanceForTestFlagIndicates whether the value of hwLoopLineTestImpedanceForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestImpedanceForTest is valid
2. invalid(2) -the value of hwLoopLineTestImpedanceForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestImpedanceForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.176 |
hwLoopLineTestMaxVForSignatureIndicates the maximum voltage for signature.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.177 |
hwLoopLineTestMaxVForSignatureFlagIndicates whether the value of hwLoopLineTestMaxVForSignature is valid.
Options:
1. valid(1) -the value of hwLoopLineTestMaxVForSignature is valid
2. invalid(2) -the value of hwLoopLineTestMaxVForSignature is invalid
3. notsupport(3) -the value of hwLoopLineTestMaxVForSignature is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.178 |
hwLoopLineTestAGMaxVForTestIndicates the A->ground max voltage in testing.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.179 |
hwLoopLineTestAGMaxVForTestFlagIndicates whether the value of hwLoopLineTestAGMaxVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMaxVForTest is valid
2. invalid(2) -the value of hwLoopLineTestAGMaxVForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestAGMaxVForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.180 |
hwLoopLineTestAGMinVForTestIndicates the A->ground min voltage in testing.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.181 |
hwLoopLineTestAGMinVForTestFlagIndicates whether the value of hwLoopLineTestAGMinVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMinVForTest is valid
2. invalid(2) -the value of hwLoopLineTestAGMinVForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestAGMinVForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.182 |
hwLoopLineTestBGMaxVForTestIndicates the B->ground max voltage in testing.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.183 |
hwLoopLineTestBGMaxVForTestFlagIndicates whether the value of hwLoopLineTestBGMaxVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMaxVForTest is valid
2. invalid(2) -the value of hwLoopLineTestBGMaxVForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestBGMaxVForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.184 |
hwLoopLineTestBGMinVForTestIndicates the B->ground min voltage in testing.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.185 |
hwLoopLineTestBGMinVForTestFlagIndicates whether the value of hwLoopLineTestBGMinVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMinVForTest is valid
2. invalid(2) -the value of hwLoopLineTestBGMinVForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestBGMinVForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.186 |
hwLoopLineTestABMaxVForTestIndicates the A->B max voltage in testing.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.187 |
hwLoopLineTestABMaxVForTestFlagIndicates whether the value of hwLoopLineTestABMaxVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMaxVForTest is valid
2. invalid(2) -the value of hwLoopLineTestABMaxVForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestABMaxVForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.188 |
hwLoopLineTestABMinVForTestIndicates the A->ground min voltage in testing.
Unit: mVro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.189 |
hwLoopLineTestABMinVForTestFlagIndicates whether the value of hwLoopLineTestABMinVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMinVForTest is valid
2. invalid(2) -the value of hwLoopLineTestABMinVForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestABMinVForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.190 |
hwLoopLineTestAGMaxCForTestIndicates the A->ground max current.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.191 |
hwLoopLineTestAGMaxCForTestFlagIndicates whether the value of hwLoopLineTestAGMaxCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMaxCForTest is valid
2. invalid(2) -the value of hwLoopLineTestAGMaxCForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestAGMaxCForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.192 |
hwLoopLineTestAGMinCForTestIndicates the A->ground min current.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.193 |
hwLoopLineTestAGMinCForTestFlagIndicates whether the value of hwLoopLineTestAGMinCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMinCForTest is valid
2. invalid(2) -the value of hwLoopLineTestAGMinCForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestAGMinCForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.194 |
hwLoopLineTestBGMaxCForTestIndicates the B->ground max current.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.195 |
hwLoopLineTestBGMaxCForTestFlagIndicates whether the value of hwLoopLineTestBGMaxCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMaxCForTest is valid
2. invalid(2) -the value of hwLoopLineTestBGMaxCForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestBGMaxCForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.196 |
hwLoopLineTestBGMinCForTestIndicates the B->ground min current.
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.197 |
hwLoopLineTestBGMinCForTestFlagIndicates whether the value of hwLoopLineTestBGMinCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMinCForTest is valid
2. invalid(2) -the value of hwLoopLineTestBGMinCForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestBGMinCForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.198 |
hwLoopLineTestABMaxCForTestIndicates the A->B max current
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.199 |
hwLoopLineTestABMaxCForTestFlagIndicates whether the value of hwLoopLineTestABMaxCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMaxCForTest is valid
2. invalid(2) -the value of hwLoopLineTestABMaxCForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestABMaxCForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.200 |
hwLoopLineTestABMaxNegCForTestIndicates the A->ground min current
Unit: uAro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.201 |
hwLoopLineTestABMaxNegCForTestFlagIndicates whether the value of hwLoopLineTestABMaxNegCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMaxNegCForTest is valid
2. invalid(2) -the value of hwLoopLineTestABMaxNegCForTest is invalid
3. notsupport(3) -the value of hwLoopLineTestABMaxNegCForTest is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.202 |
hwLoopLineTestLineALengthIndicates length of line A
Unit: mro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.203 |
hwLoopLineTestLineBLengthIndicates length of line B
Unit: mro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.204 |
hwLoopLineTestTermimalConcusionIndicates Termimal Concusion
Options:
1. noPhone(1) -the TermimalConcusion is not connect Phone
2. offHook(2) -the TermimalConcusion is connect phone and offhook
3. eTSIxDSLsignature(3) -the TermimalConcusion is ETSI XDSL Signature
4. abMixed(4) -the TermimalConcusion is ab line short
5. rcNetWork(5) -the TermimalConcusion is rcNetWork
6. elecRing(6) -the TermimalConcusion is elecRing
7. other(7) -the TermimalConcusion is other unknown terminal
8. abMixInMDF(8) -the TermimalConcusion is abMixInMDF
9. abMixOutMDF(9) -the TermimalConcusion is abMixOutMDF
10. invalid(-1) -the TermimalConcusion is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.205 |
hwLoopLineTestMoreDataFlagIndicates is there more data
Options:
1. more(1) -Indicates there is more data needs report,but needs a SNMP-GET oper. to get other data.
2. invalid(-1) -Indicates the value is invalidro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.206 |
hwLoopLineTestCtrLVAggregate tip-ring capacitance: CtrLV = Cco + Ctr + Cring, measured by means of low voltage ramps,
such that it does NOT include the capacitance Csig whenever the ETSI Signature terminates the subscriber loop.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.207 |
hwLoopLineTestCtrLVFlagIndicates whether the value of hwLoopLineTestCtrLV is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCtrLV is valid
2. invalid(2) -the value of hwLoopLineTestCtrLV is invalid
3. notsupport(3) -the value of hwLoopLineTestCtrLV is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.208 |
hwLoopLineTestCtrHVAggregate tip-ring capacitance: CtrHV = Cco + Ctr + Cring + Csig, measured by means of high voltage ramps.
It includes the capacitance Csig of an ETSI Signature whenever connected to the tip and ring wires.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.209 |
hwLoopLineTestCtrHVFlagIndicates whether the value of hwLoopLineTestCtrHV is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCtrHV is valid
2. invalid(2) -the value of hwLoopLineTestCtrHV is invalid
3. notsupport(3) -the value of hwLoopLineTestCtrHV is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.210 |
hwLoopLineTestCtrAcAggregate tip-ring capacitance: CtrAc = Cco + Ctr + Cring, measured by means of a low amplitude
AC signal (either 25 Hz or 275 Hz). It does NOT include Csig.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.211 |
hwLoopLineTestCtrAcFlagIndicates whether the value of hwLoopLineTestCtrAc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCtrAc is valid
2. invalid(2) -the value of hwLoopLineTestCtrAc is invalid
3. notsupport(3) -the value of hwLoopLineTestCtrAc is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.212 |
hwLoopLineTestRtgSerResistance in series with Ctg, measured at the selected AC frequency (either 25 Hz or 275 Hz)
by means of a low amplitude AC signal.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.213 |
hwLoopLineTestRtgSerFlagIndicates whether the value of hwLoopLineTestRtgSer is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRtgSer is valid
2. invalid(2) -the value of hwLoopLineTestRtgSer is invalid
3. notsupport(3) -the value of hwLoopLineTestRtgSer is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.214 |
hwLoopLineTestRrgSerResistance in series with Crg, measured at the selected AC frequency (either 25 Hz or 275 Hz)
by means of a low amplitude AC signal.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.215 |
hwLoopLineTestRrgSerFlagIndicates whether the value of hwLoopLineTestRrgSer is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRrgSer is valid
2. invalid(2) -the value of hwLoopLineTestRrgSer is invalid
3. notsupport(3) -the value of hwLoopLineTestRrgSer is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.216 |
hwLoopLineTestRtrSerResistance in series with Ctring, measured at the selected AC frequency (either 25 Hz or 275 Hz)
by means of a low amplitude AC signal.
Unit: ohmro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.217 |
hwLoopLineTestRtrSerFlagIndicates whether the value of hwLoopLineTestRtrSer is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRtrSer is valid
2. invalid(2) -the value of hwLoopLineTestRtrSer is invalid
3. notsupport(3) -the value of hwLoopLineTestRtrSer is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.218 |
hwLoopLineTestUtgAcAdmitAmplitude of the AC signal (either 25 Hz or 275 Hz) applied to the tipground admittance Ytg = Gtg + i * Btg.
Unit: Vro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.219 |
hwLoopLineTestUtgAcAdmitFlagIndicates whether the value of hwLoopLineTestUtgAcAdmit is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgAcAdmit is valid
2. invalid(2) -the value of hwLoopLineTestUtgAcAdmit is invalid
3. notsupport(3) -the value of hwLoopLineTestUtgAcAdmit is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.220 |
hwLoopLineTestUrgAcAdmitAmplitude of the AC signal (either 25 Hz or 275 Hz) applied to the ringground admittance Yrg = Grg + i * Brg.
Unit: Vro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.221 |
hwLoopLineTestUrgAcAdmitFlagIndicates whether the value of hwLoopLineTestUrgAcAdmit is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgAcAdmit is valid
2. invalid(2) -the value of hwLoopLineTestUrgAcAdmit is invalid
3. notsupport(3) -the value of hwLoopLineTestUrgAcAdmit is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.222 |
hwLoopLineTestUtrAcAdmitAmplitude of the AC signal (either 25 Hz or 275 Hz) applied to the tip-ring admittance Ytr = Gtr + i * Btr.
Unit: Vro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.223 |
hwLoopLineTestUtrAcAdmitFlagIndicates whether the value of hwLoopLineTestUtrAcAdmit is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrAcAdmit is valid
2. invalid(2) -the value of hwLoopLineTestUtrAcAdmit is invalid
3. notsupport(3) -the value of hwLoopLineTestUtrAcAdmit is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.224 |
hwLoopLineTestCapterminalA capacitive termination of the access line shall be identified by the capacitance measurement and the associated evaluation.
The following average value for the capacitance Cabk of the measured cable can be assumed:
Cabk = 0.083(Cae + Cbe).
If the measured capacitance is Cab > Cabk + 50 nF for ADSL&VDSL, or Cab > Cabk + 100 nF for SHDSL, respectively,
It can be assumed that a terminal device with a significant self-capacitance is connected to the line.
The cable-factor 0.083 is determined by hwLoopLineTestSysConfigCableFactor.
Options:
1. noexist(1) -Significant terminal device capacitance is not detected
2. exist(2) -Significant terminal device capacitance is detectedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.225 |
hwLoopLineTestCapterminalFlagIndicates whether the value of hwLoopLineTestCapterminal is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapterminal is valid
2. invalid(2) -the value of hwLoopLineTestCapterminal is invalid
3. notsupport(3) -the value of hwLoopLineTestCapterminal is not supportro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.226 |
hwMeterTestOprTableOperation table of the meter test.
It implements the meter test function in the system. The test board provides the interface connected to the external test meter such as a multimeter through the meter test function.
The index of this table is ifIndex. SEQUENCE OF HwMeterTestOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.3 |
hwMeterTestOprEntryOperation table of the meter test.
It implements the meter test function in the system. The test board provides the interface connected to the external test meter such as a multimeter through the meter test function.
The index of this entry is ifIndex. HwMeterTestOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.3.1 |
hwMeterTestOprTypeOperation type.
Options:
1. stop(1) -operation type is stop
2. start(2) -operation type is startrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.3.1.1 |
hwMeterTestItemTest items.
Options:
1. inline(1) -in test
2. outline(2) -out testrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.3.1.2 |
hwMeterTestStatusTest status.
Options:
1. success(1) -no test on busy
2. fail(2) -remedy test on busy
3. portbusy(3) -forced test on busy
4. outoftime(4) -test out of time
5. testingAbnormal(5) -test abnormal
6. broadbandtesting(6) -broadband testing
7. capturefail(7) -capture fail
8. notratb(8) -relay transfer board not existro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.3.1.3 |
hwMeterTestBusyFlagMeter test busy flag.
Options:
1. busyNoTest(1) -no test on busy
2. busyTest(2) -test on busy
3. busystrenTest(3) -forced test on busyrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.3.1.4 |
hwTestBoardDiagnoseTestOprTableOperation table of the self-test on the test board.
It implements the self-test on the test board in the system. The self-test checks whether the test board can work in the normal state.
The index of this table is ifIndex. SEQUENCE OF HwTestBoardDiagnoseTestOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.4 |
hwTestBoardDiagnoseTestOprEntryOperation table of the self-test on the test board.
It implements the self-test on the test board in the system. The self-test checks whether the test board can work in the normal state.
The index of this entry is ifIndex. HwTestBoardDiagnoseTestOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.4.1 |
hwTestBoardDiagnoseTestOprTypeOperation type.
Options:
1. start(2) -operation type is startrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.1 |
hwTestBoardDiagnoseTestResultSelf-diagnosis result.
Options:
1. selfTestOver(1) -self-diagnosis successful
2. selfTestFail(2) -self-diagnosis failure
3. testingAbnormal(3) -test abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.2 |
hwTestBoardDiagnoseTestRAMSystem RAMRAM.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.3 |
hwTestBoardDiagnoseTestVoltageVoltage.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.4 |
hwTestBoardDiagnoseTestResistanceResistance.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.5 |
hwTestBoardDiagnoseTestSignalSignal circuit.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.6 |
hwTestBoardDiagnoseTestDTMFDTMF.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.7 |
hwTestBoardDiagnoseTestRingRinging.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.8 |
hwTestBoardDiagnoseTestOnOffHookOn/off hook.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.9 |
hwTestBoardDiagnoseTestPolePolarity reversal.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.10 |
hwTestBoardDiagnoseTestISDNUISDN U port.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.11 |
hwTestBoardDiagnoseTestBitErrCodeError code test.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.12 |
hwTestBoardDiagnoseTestCapacitanceCapacitance.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormalro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.4.1.13 |
hwTestBoardStatusQueryOprTableOperation table for querying the status of the test board.
It implements the function of querying the status of the test board in the system. You can query the current status of the test board through this function.
The index of this table is ifIndex. SEQUENCE OF HwTestBoardStatusQueryOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.5 |
hwTestBoardStatusQueryOprEntryOperation table for querying the status of the test board.
It implements the function of querying the status of the test board in the system. You can query the current status of the test board through this function.
The index of this entry is ifIndex. HwTestBoardStatusQueryOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.5.1 |
hwTestBoardStatusQueryOprTypeOperation type.
Options:
1. beginQuery(2) -startrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.5.1.1 |
hwTestBoardStatusQueryResultQuery status.
Options:
1. querySuccess(1) -query status successful
2. queryFail(2) -query status failurero Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.5.1.2 |
hwTestBoardStatusQueryVersionVersion.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.5.1.3 |
hwTestBoardStatusQueryTestItemTest item.
Options:
1. testIdle(1) -idle
2. pstnUserInLineTest(2) -pstn inline test
3. userLineTest(3) -loop line test
4. phoneTest(4) -telephone test
5. manTestOutLine(5) -manual test outline
6. manTestInnerLine(6) -manual test inline
7. halfAutoUserCircuit(7) -half auto tss user circuit
-meter interface
8. halfAutoTssPhoneCircuit(8) -half auto tss telephone circuit
-meter interface
9. tssSelfTest(9) -Tss self test
10. testInnerBus(10) -test inline bus test
11. testOuterBus(11) -test outline bus test
12. digUserOutLineTest(12) -isdn outline test
13. digUserInnerLineTest(13) -isdn inline test
14. switchToStandIsdnTerminal(14) -switch to standard isdn terminal
15. switchToIsdnSpecialcode(15) -switch to isdn special service telephone number
16. testBoarDfault(16) -test board fault
17. pstnRemoteCallTest(17) -pstn user remote call test
18. indialtest(18) -in-dial test
19. coEmulate(33) -CO simulation test
20. cqtTest(34) -CQT test
21. cqtFRTest(35) -CQT Frequency Response Measurement
22. cqtTDRTest(36) -CQT Time Domain Reflectometry Measurement
23. cqtDMTTest(37) -CQT Data Rate Prediction Measurement
24. cqtNSETest(38) -CQT Noise Measurement
25. cqtLBTest(39) -CQT Longitudinal Balance Measurement
26. cqtLCTest(40) -CQT Load Coil Detection
27. internalcaptureTestedPort(61) -Capture tested port loopline
28. externalcaptureTestedPort(62) -Capture tested port inline
29. monitorTest(63) -monitor test
30. seltTest(64) -selt test
31. sendtoneTest(65) -tone send test
32. checktoneTest(66) -tone check test
33. autocalltest(67) -auto call test
34. anothermainboardistesting(241) -another main board is testingro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.5.1.4 |
hwTestBoardStatusTestedBoardIfIndexIndex of the tested port.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.5.1.5 |
hwSearchingToneOprTableThis table is used for enabling the searching tone test by setting the searching tone
test voltage level, test frequency, and test duration. The searching tone test
is to locate a specific line from various lines by transmitting pulse tones to lines.
This test helps carriers locate faults and provision services.
The index of this table is ifindex. SEQUENCE OF HwSearchingToneOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.6 |
hwSearchingToneOprEntryThis table is used for enabling the searching tone test by setting the searching tone
test voltage level, test frequency, and test duration. The searching tone test
is to locate a specific line from various lines by transmitting pulse tones to lines.
This test helps carriers locate faults and provision services.
The index of this entry is ifindex. HwSearchingToneOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.6.1 |
hwSearchingToneOprTypeSearching tone test-operation type.
Options:
1. stop(1) -stop a searching tone test
2. start(2) -start a searching tone test
3. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.6.1.1 |
hwSearchingToneLevelIndicates the test voltage level of a searching tone test.
Options:
1. -1 -Invalid value
2. 80..500 -(XDSL Range: 80-126 MXU voice Range: 80-500)
Default: 120 -(XDSL Default: 120 MXU voice default:295)
Unit: mVrw Integer32 (-1 | 80..500) .1.3.6.1.4.1.2011.6.21.1.1.1.6.1.2 |
hwSearchingToneFrequencyIndicates the test frequency of a searching tone test.
Default: 800
Unit: Hzrw Integer32 (-1 | 300..3400) .1.3.6.1.4.1.2011.6.21.1.1.1.6.1.3 |
hwSearchingToneDurationTimeIndicates the test duration of a searching tone test.
Default: 9000
Unit: 0.1srw Integer32 (-1 | 1..54000) .1.3.6.1.4.1.2011.6.21.1.1.1.6.1.4 |
hwSearchingToneRemainingTimeIndicates the test remaining time of a searching tone test.
Unit: 0.1sro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.6.1.5 |
hwSearchingToneBusyProcFlagSearching tone test-busy flag.
Options:
1. cancel(1) -when port is busy do not start a searching tone test
2. force(2) -when port is busy force to start a searching tone test
3. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.6.1.6 |
hwLoopLineTestCalibrationTableThis table provides the test calibration data of a line. Before delivery,
each port is performed with a test in which no user is connected to the
port and the test result is saved as standard data. The standard data is used for
calibrating the test result of tests in the actual environment.
The index of this table is ifindex. SEQUENCE OF HwLoopLineTestCalibrationEntry .1.3.6.1.4.1.2011.6.21.1.1.1.7 |
hwLoopLineTestCalibrationEntryThis table provides the test calibration data of a line. Before delivery,
each port is performed with a test in which no user is connected to the
port and the test result is saved as standard data. The standard data is used for
calibrating the test result of tests in the actual environment.
The index of this entry is ifindex. HwLoopLineTestCalibrationEntry .1.3.6.1.4.1.2011.6.21.1.1.1.7.1 |
hwLoopLineTestAGCalibrationIndicates the test calibration data of A->Ground capacitance.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.7.1.1 |
hwLoopLineTestBGCalibrationIndicates the test calibration data of B->Ground capacitance.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.7.1.2 |
hwLoopLineTestABCalibrationIndicates the test calibration data of A->B capacitance.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.7.1.3 |
hwLoopLineTestMeltVerTableThis table provides the information about the MELT chip on the board,
including the vendor, hardware version, and software version.
The indexes of this table are hwFrameIndex and hwSlotIndex. SEQUENCE OF HwLoopLineTestMeltVerEntry .1.3.6.1.4.1.2011.6.21.1.1.1.8 |
hwLoopLineTestMeltVerEntryThis table provides the information about the MELT chip on the board,
including the vendor, hardware version, and software version.
The indexes of this entry are hwFrameIndex and hwSlotIndex. HwLoopLineTestMeltVerEntry .1.3.6.1.4.1.2011.6.21.1.1.1.8.1 |
hwLoopLineTestMeltFactoryMELT chipset manufacturer information
Maximum length: 32 Octetsro OCTET STRING .1.3.6.1.4.1.2011.6.21.1.1.1.8.1.1 |
hwLoopLineTestMeltChipMELT chipset manufacturer hardware information
Maximum length: 128 Octetsro OCTET STRING .1.3.6.1.4.1.2011.6.21.1.1.1.8.1.2 |
hwLoopLineTestMeltFirmwareVerMELT chipset manufacturer version information
Maximum length: 16 Octetsro OCTET STRING .1.3.6.1.4.1.2011.6.21.1.1.1.8.1.3 |
hwLoopLineTestSysConfigPara OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.1.1.9 |
hwLoopLineTestSysConfigConvertABIndicates the polarity of A wire and B wire.
Options:
1. normal(1) -default polarity of A wire and B wire
2. reverse(2) -reverse polarity of A wire and B wire
3. invalid(-1) -invalid value
Default: normal(1)rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.9.1 |
hwLoopLineTestSysConfigCableFactorThe cable-factor used to detect significant terminal device capacitance.
The cable-factor ranges from 1 to 1000 units of 0.001
(Physical values are 0.001 to 1, default: 0.083).rw Unsigned32 .1.3.6.1.4.1.2011.6.21.1.1.1.9.2 |
hwLoopLineTestSysConfigSigCapUpperLimitThe three parameters(capacitance's upper-limit value, lower-limit value and resistance value) are used to determine the signature's existence.
The capacitance ranges from 50nF to 2500nF, default: 1350nF.
The capacitance's upper-limit value >= the capacitance's lower-limit value.rw Unsigned32 .1.3.6.1.4.1.2011.6.21.1.1.1.9.3 |
hwLoopLineTestSysConfigSigCapLowerLimitThe three parameters(capacitance's upper-limit value, lower-limit value and resistance value) are used to determine the signature's existence.
The capacitance ranges from 50nF to 2500nF, default: 250nF.
The capacitance's upper-limit value >= the capacitance's lower-limit value.rw Unsigned32 .1.3.6.1.4.1.2011.6.21.1.1.1.9.4 |
hwLoopLineTestSysConfigSigResistanceThe three parameters(capacitance's upper-limit value, lower-limit value and resistance value) are used to determine the signature's existence.
The resistance ranges from 10000ohm to 1000000ohm, default: 55000ohm.rw Unsigned32 .1.3.6.1.4.1.2011.6.21.1.1.1.9.5 |
hwONTPotsTestOprTableThis table is used for enabling the POTS port line test of the ONT by setting the test
item, test frequency, and test threshold. This test helps operators locate faults and
provision services.
The indexes of this table are ifindex, hwONTPotsTestONTIndex and hwONTPotsTestONTPstnPortIndex. SEQUENCE OF HwONTPotsTestOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.10 |
hwONTPotsTestOprEntryThis table is used for enabling the POTS port line test of the ONT by setting the test
item, test frequency, and test threshold. This test helps operators locate faults and
provision services.
The indexes of this entry are ifindex, hwONTPotsTestONTIndex and hwONTPotsTestONTPstnPortIndex. HwONTPotsTestOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.10.1 |
hwONTPotsTestONTIndexONT ID. Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.1 |
hwONTPotsTestONTPstnPortIndexONT port ID. Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.2 |
hwONTPotsTestOprTypePOTS port line Test-operation type.
Options:
1. stop(1) -stop a POTS port line test
2. start(2) -start a POTS port line test
3. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.3 |
hwONTPotsTestItemPOTS port line test item.
Options:
1. allMLTTests(1) -outdoor connection test
2. hazardousPotential(2) -hazardous potential test
3. foreignEMF(3) -foreign electromotive force(EMF) test
4. resistiveFaults(4) -resistive faults test
5. receiverOff-hook(5) -receiver off-hook test
6. ringer(6) -ringer impedance test
7. nT1DcSignatureTest(7) -NT1 dc signature test
8. selfTest(8) -self test
9. dialToneMake-breakTest(9) -dial tone make-break test
10. subscriber-line(10) -subscriber line test
11. vendor-specificTest2(11) -vendor-specific test
all results are returned in a test result message
12. vendor-specificTest3(12) -vendor-specific test
all results are returned in a test result message
13. vendor-specificTest4(13) -vendor-specific test
the test results are returned in general purpose buffer ME
the ONT must deny a test operation command if bytes 39-40 do not point to a GP buffer
14. vendor-specificTest5(14) -vendor-specific test
the test results are returned in general purpose buffer ME
the ONT must deny a test operation command if bytes 39-40 do not point to a GP buffer
15. vendor-specificTest6(15) -vendor-specific test
the test results are returned in general purpose buffer ME
the ONT must deny a test operation command if bytes 39-40 do not point to a GP buffer
16. vendor-specificTest7(16) -vendor-specific test
the test results are returned in general purpose buffer ME
the ONT must deny a test operation command if bytes 39-40 do not point to a GP bufferrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.4 |
hwONTPotsTestBusyProcFlagTest mode when a line is busy.
Options:
1. cancel(1) -deny a test if a line is busy
2. force(2) -forced moderw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.5 |
hwONTPotsTestT1ThresholdSlow dial tone threshold.
Options:
1. 0 -Invalid value. It indicates that an ONT will use its default value
2. 100..6000 -Valid value rangerw Integer32(0 | 100..6000) .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.6 |
hwONTPotsTestT2ThresholdNo dial tone threshold.
Options:
1. 0 -Invalid value. It indicates that an ONT will use its default value
2. 1000..10000 -Valid value rangerw Integer32(0 | 1000..10000) .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.7 |
hwONTPotsTestT3ThresholdSlow break dial tone threshold.
Options:
1. 0 -Invalid value. It indicates that an ONT will use its default value
2. 100..3000 -Valid value rangerw Integer32(0 | 100..3000) .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.8 |
hwONTPotsTestT4ThresholdNo break dial tone threshold.
Options:
1. 0 -Invalid value. It indicates that an ONT will use its default value
2. 1000..3000 -Valid value rangerw Integer32(0 | 1000..3000) .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.9 |
hwONTPotsTestDtmfDigitDTMF test number.
Options:
1. zero(1) -the test number is 0
2. one(2) -the test number is 1
3. two(3) -the test number is 2
4. three(4) -the test number is 3
5. four(5) -the test number is 4
6. five(6) -the test number is 5
7. six(7) -the test number is 6
8. seven(8) -the test number is 7
9. eight(9) -the test number is 8
10. nine(10) -the test number is 9
11. symbolStar(11) -the test number is *
12. symbolSharp(12)-the test number is #
13. default(13) -use the default value (number) of the systemrw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.10 |
hwONTPotsTestDialTypeThe dialling type of dialling tone test.
Options:
1. dtmf(1) -dtmf type
2. pulse(2) -pulse typerw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.11 |
hwONTPotsTestDialToneFreq1The frequency1 in the dialling tone test.
0 -unused
Unit: Hzrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.12 |
hwONTPotsTestDialToneFreq2The frequency2 in the dialling tone test.
0 -unused
Unit: Hzrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.13 |
hwONTPotsTestDialToneFreq3The frequency3 in the dialling tone test.
0 -unused
Unit: Hzrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.14 |
hwONTPotsTestDialToneEnergyThresholdThe value of energy threshold in the dialling tone test.
Valid value:
1. 0x00: unspecified
2. 0x01-0xFD: -0.1 dBm0 to -25.3 dBm0
Unit: 0.1 dBm0rw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.15 |
hwONTPotsTestIdleChannelEnergyThresholdThe value of energy threshold in the dialling tone test when the line
is in the idle state.
Valid value:
1. 0x00: unspecified
2. 0x01-0x5A: -1 dBm0 to -90 dBm0
Unit: 1 dBm0rw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.16 |
hwONTPotsTestDCHazardousVoltThresholdThe value of DC voltage threshold in the hazardous potential test.
0x00 -unspecified
Unit: voltrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.17 |
hwONTPotsTestACHazardousVoltThresholdThe value of AC voltage threshold in the hazardous potential test.
0x00 -unspecified
Unit: volt.rw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.18 |
hwONTPotsTestDCForeignVoltThresholdThe value of DC voltage threshold in the foreign volt test.
0x00 -unspecified
Unit: voltrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.19 |
hwONTPotsTestACForeignVoltThresholdThe value of AC voltage threshold in the foreign volt test.
0x00 -unspecified
Unit: voltrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.20 |
hwONTPotsTestAGBGResistanceThresholdThe resistance (tip to ground, ring to ground) threshold in the
resistive faults test.
0x00 -unspecified
Unit: kilohmrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.21 |
hwONTPotsTestABResistanceThresholdThe resistance (tip to ring) threshold in the resistive faults test.
0x00 -unspecified
Unit: kilohmrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.22 |
hwONTPotsTestRingerEquivMinThresholdRinger equivalence minimum threshold.
0x00 -unspecified
Unit: 0.01 RENrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.23 |
hwONTPotsTestRingerEquivMaxThresholdRinger equivalence maximum threshold.
0x00 -unspecified
Unit: 0.01 RENrw Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.24 |
hwONTPotsTestMLTResultMLT qualitative test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not runro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.25 |
hwONTPotsTestHazardousVoltResultHazardous volt test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not runro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.26 |
hwONTPotsTestEMFResultEMF test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not runro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.27 |
hwONTPotsTestResistacneResultResistacne test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not runro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.28 |
hwONTPotsTestOffHookResultThe off-hook test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not runro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.29 |
hwONTPotsTestRingerResultRinger test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not runro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.30 |
hwONTPotsTestNT1DCSignalResultNT1 DC Signal test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not runro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.31 |
hwONTPotsTestSelfTestResultSelf test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not run
3. notCompleted(3) -a test is not complete yetro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.32 |
hwONTPotsTestDrawDialToneResultDraw dialling tone test result.
Options:
1. notRun(1) -a test does not run
2. couldNotDraw1(3) -a test fails to draw
3. couldNotDraw2(4) -a test fails to draw
4. slowDraw1(5) -slow draw
5. slowDraw2(6) -slow draw
6. pass1(7) -a test passes
7. pass2(8) -a test passesro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.33 |
hwONTPotsTestBreakDialToneResultThe break dialling tone test result.
Options:
1. notRun(1) -a test does not run
2. couldNotDraw1(3) -a test fails to draw
3. couldNotDraw2(4) -a test fails to draw
4. slowDraw1(5) -slow draw
5. slowDraw2(6) -slow draw
6. pass1(7) -a test passes
7. pass2(8) -a test passesro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.34 |
hwONTPotsTestQuietEnergyResultThe quiet energy test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.35 |
hwONTPotsTestDialToneEnergyResultThe dialling tone energy test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails.
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.36 |
hwONTPotsTestLoopDCAGVoltResultThe DC A-G (tip to ground) volt loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.37 |
hwONTPotsTestLoopDCBGVoltResultThe DC B-G (ring to ground) volt loop test result.
Options:
1. notRun(1) -a test does not run.
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.38 |
hwONTPotsTestLoopACAGVoltResultThe AC A-G (tip to ground) volt loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.39 |
hwONTPotsTestLoopACBGVoltResultThe AC B-G (ring to ground) volt loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.40 |
hwONTPotsTestLoopResistanceAGResultThe A-G (ring to ground) resistance loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.41 |
hwONTPotsTestLoopResistanceBGResultThe B-G (ring to ground) resistance loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.42 |
hwONTPotsTestLoopResistanceABResultThe A-B (tip to ring) resistance loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.43 |
hwONTPotsTestLoopRingerLoadTestResultThe ringer load Loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMeasurementReported(4) -a test fails
the measurement is reported
4. passMeasurementNotReported(7) -a test passes
the measurement is not reported
5. passMeasurementReported(8) -a test passes
the measurement is reportedro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.44 |
hwONTPotsTestDrawDialToneTimeValueThe draw dial tone test result. Valid only if value of hwONTPotsTestDrawDialToneResult
is couldNotDraw2(4), slowDraw2(6) or pass2(8).
Unit: 100ms.
Step: 100ms.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.45 |
hwONTPotsTestBreakDialToneTimeValueThe break dial tone test result. Valid only if value of hwONTPotsTestBreakDialToneResult
is couldNotDraw2(4), slowDraw2(6) or pass2(8).
Unit: 100ms.
Step: 100 ms.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.46 |
hwONTPotsTestQuietEnergyValueThe quiet energy test result. Valid only if value of hwONTPotsTestQuietEnergyResult
is failMeasurementReported(4) or passMeasurementReported(8).
Values:
0-90 : 0 dBm0 to -90 dBm0
Step: 1 dBm0ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.47 |
hwONTPotsTestDialToneEnergyValueThe dial energy test result. Valid only if value of hwONTPotsTestDialToneEnergyResult
is failMeasurementReported(4) or passMeasurementReported(8).
Values:
0-255 : 0 dBm0 to -25.5 dBm0
Values above 0 dBm0 are reported as 0.
Step: 0.1 dBm0ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.48 |
hwONTPotsTestLoopDCAGVoltValueThe DC A-G(Tip-ground) volt Loop test result or Subscriber line test result.
2s complement, resolution 1V. Valid only if value of hwONTPotsTestLoopDCAGVoltResult
is failMeasurementReported(4) or passMeasurementReported(8) when loop tested.
Valid only if value of hwONTPotsTestSubscriberLineTestResult is not testTimeout(29)
or testFailed(30) or invalid(-1) when subscriber line test.
Unit: volt.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.49 |
hwONTPotsTestLoopDCBGVoltValueThe DC B-G(Ring-ground) volt Loop test result or Subscriber line test result.
2s complement, resolution 1V. Valid only if value of hwONTPotsTestLoopDCBGVoltResult
is failMeasurementReported(4) or passMeasurementReported(8) when loop tested.
Valid only if value of hwONTPotsTestSubscriberLineTestResult is not testTimeout(29)
or testFailed(30) or invalid(-1) when subscriber line test.
Unit: volt.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.50 |
hwONTPotsTestLoopACAGVoltValueThe AC A-G(Tip-ground) volt Loop test result or Subscriber line test result.
Valid only if value of hwONTPotsTestLoopACAGVoltResult is failMeasurementReported(4)
or passMeasurementReported(8) when loop tested.
Valid only if value of hwONTPotsTestSubscriberLineTestResult is not testTimeout(29)
or testFailed(30) or invalid(-1) when subscriber line test.
Unit: volt.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.51 |
hwONTPotsTestLoopACBGVoltValueThe AC B-G(Ring-ground) volt Loop test result or Subscriber line test result.
Valid only if value of hwONTPotsTestLoopACBGVoltResult is failMeasurementReported(4)
or passMeasurementReported(8) when loop tested.
Valid only if value of hwONTPotsTestSubscriberLineTestResult is not testTimeout(29)
or testFailed(30) or invalid(-1) when subscriber line test.
Unit: volt.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.52 |
hwONTPotsTestLoopResistanceAGValueThe A-G (tip to ground) resistance loop test result or Subscriber line test result.
Unit: kilohm.
Infinite resistance: 65535.
Valid only if value of hwONTPotsTestLoopResistanceAGResult is
failMeasurementReported(4) or passMeasurementReported(8) when loop tested.
Valid only if value of hwONTPotsTestSubscriberLineTestResult is not testTimeout(29)
or testFailed(30) or invalid(-1) when subscriber line test.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.53 |
hwONTPotsTestLoopResistanceBGValueThe B-G (ring to ground) resistance loop test result or Subscriber line test result.
Unit: kilohm.
Infinite resistance: 65535.
Valid only if value of hwONTPotsTestLoopResistanceAGResult is
failMeasurementReported(4) or passMeasurementReported(8) when loop tested.
Valid only if value of hwONTPotsTestSubscriberLineTestResult is not testTimeout(29)
or testFailed(30) or invalid(-1) when subscriber line test.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.54 |
hwONTPotsTestLoopResistanceABValueThe A-B (tip to ring) resistance loop test result or Subscriber line test result.
Unit: kilohm.
Infinite resistance: 65535.
Valid only if value of hwONTPotsTestLoopResistanceAGResult is
failMeasurementReported(4) or passMeasurementReported(8) when loop tested.
Valid only if value of hwONTPotsTestSubscriberLineTestResult is not testTimeout(29)
or testFailed(30) or invalid(-1) when subscriber line test.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.55 |
hwONTPotsTestLoopRingerLoadTestValueThe ringer load test result. Valid only if value of hwONTPotsTestLoopRingerLoadTestResult
is failMeasurementReported(4) or passMeasurementReported(8).
Unit: 0.1 REN.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.56 |
hwONTPotsTestSubscriberLineTestResultThe subscriber line test result.
Options:
1. normal(1) -subscriber line test normal
2. acCurrentAbnormal(12) -AC current abnormal
3. dcCurrentAbnormal(13) -DC current abnormal
4. loopCurrentAbnormal(14) -loop current abnormal
5. loopResistanceAbnormal(15) -loop resistance abnormal
6. insulatingResistanceAbnormal(16) -insulating resistance abnormal
7. capacitanceAbnormal(17) -capacitance abnormal
8. impedanceAbnormal(18) -impedance abnormal
9. insulatingNotGood(22) -insulating not good
10. brokenLines(23) -broken lines
11. lineMixing(24) -line mixing
12. connectedToGround(25) -connected to ground
13. abLinereversal(26) -ABLine reversal
14. lineLeaking(27) -line leaking
15. phoneDisconnect(28) -phone disconnect
16. testTimeout(29) -test is time out
17. testFailed(30) -test failed
18. invalid(-1) -a test does not runro Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.57 |
hwONTPotsTestLoopDCABVoltValueThe DC A-B (tip-Ring) volt result of subscriber line test.
Unit: volt.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.58 |
hwONTPotsTestLoopACABVoltValueThe AC A-B (Tip-Ring) volt result of subscriber line test.
Unit: volt.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.59 |
hwONTPotsTestLoopAGCapacitanceValueThe A->G (Tip-Ground) capacitance result of subscriber line test.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.60 |
hwONTPotsTestLoopBGCapacitanceValueThe B->G (Ring-Ground) capacitance result of subscriber line test.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.61 |
hwONTPotsTestLoopABCapacitanceValueThe A->B (Tip-Ring) capacitance result of subscriber line test.
Unit: nFro Integer32 .1.3.6.1.4.1.2011.6.21.1.1.1.10.1.62 |
hwPortTestingListOprTableThis table is used to query the ports under a test by board.
The indexes of this table are hwFrameIndex and hwSlotIndex. SEQUENCE OF HwPortTestingListOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.11 |
hwPortTestingListOprEntryThis table is used to query the ports under a test by board.
The indexes of this entry are hwFrameIndex and hwSlotIndex. HwPortTestingListOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.11.1 |
hwMeltTestingPortListList of ports under a MELT test on a board.
The result is analyzed as follow: If a bit in the bit string is set to 1, it indicates that the corresponding port is under a MELT test.
For example, if port 8 is under a MELT test, the eighth character of the string is set to 1, and 0000 0000 1000 0000, namely,
# 0x00 0x80 is issued. Note that the value of the bit type starts from 0.ro Bits .1.3.6.1.4.1.2011.6.21.1.1.1.11.1.1 |
hwSearchToneTestingPortListList of ports under a searching tone test on a board.
The result is analyzed as follow: If a bit in the bit string is set to 1, it indicates that the corresponding port is under a searching tone test.
For example, if port 8 is under MELT test, the eighth character of the string is set to 1,
and 0000 0000 1000 0000, namely, # 0x00 0x80 is issued. Note that the value of the bit type starts from 0.ro Bits .1.3.6.1.4.1.2011.6.21.1.1.1.11.1.2 |
hwWettingCurrentOprTableThis table is used for enabling the wetting current by setting the wetting current's
working voltage, maximum voltage and slope.
The index of this table is ifindex. SEQUENCE OF HwWettingCurrentOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.12 |
hwWettingCurrentOprEntryThis table is used for enabling the wetting current by setting the wetting current's
working voltage, maximum voltage and slope.
The index of this entry is ifindex. HwWettingCurrentOprEntry .1.3.6.1.4.1.2011.6.21.1.1.1.12.1 |
hwWettingCurrentOprStatusWetting Current operation type.
Options:
1. enabled(1) -enable a wetting current port
2. disabled(2) -disable a wetting current port
3. invalid(-1) -invalid value
enabled(1) and disabled(2) options are available in the set operation.
enabled(1), disabled(2) and invalid(-1) options are available in the get operation.rw Enumeration .1.3.6.1.4.1.2011.6.21.1.1.1.12.1.1 |
hwWettingCurrentOprWorkingVoltageIndicates the working voltage of a wetting current port.
Options:
1. -1 -Invalid value
2. 1..120 -Valid value range
Default: 90
Unit: voltrw Integer32 (-1 | 1..120) .1.3.6.1.4.1.2011.6.21.1.1.1.12.1.2 |
hwWettingCurrentOprMaximumVoltageIndicates the maximum voltage of a wetting current port.
Options:
1. -1 -Invalid value
2. 1..120 -Valid value range
Default: 30
Unit: voltrw Integer32 (-1 | 1..120) .1.3.6.1.4.1.2011.6.21.1.1.1.12.1.3 |
hwWettingCurrentOprSlopeIndicates the slope of a wetting current port.
Options:
1. -1 -Invalid value
2. 200..20000 -Valid value range
Default: 200
Unit: volt per secondrw Integer32 (-1 | 200..20000) .1.3.6.1.4.1.2011.6.21.1.1.1.12.1.4 |
hwTestCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.2 |
hwTestCommonTrapVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.2.1 |
hwTestCommonVbOidsReason OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.2.1.2 |
hwTestClearedReasonDefinition of the test-canceling reasons.
Options:
1. testBoardFail(1) -the test-canceling reason is testBoardFail
2. testedBoardFail(2) -the test-canceling reason is testedBoardFail
3. userCmd(3) -the test-canceling reason is userCmd
4. switchOver(4) -the test-canceling reason is switchOver
5. anotherMainBoardIsTesting(5) -the test-canceling reason is anotherMainBoardIsTesting
6. unknowError(255) -the test-canceling reason is unknowErrorro Enumeration .1.3.6.1.4.1.2011.6.21.1.2.1.2.1 |
hwTestRingSrcAlarmReasonDefinition of the ringing source alarms.
Options:
1. testRingSrcFail(1) -the ringing source alarm is testRingSrcFail
2. testRingSrcRestore(2) -the ringing source alarm is testRingSrcRestorero Enumeration .1.3.6.1.4.1.2011.6.21.1.2.1.2.2 |
hwTestCommonRequestIDNMS request ID.ro Integer32 .1.3.6.1.4.1.2011.6.21.1.2.1.3 |
hwTestCommonAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.2.2 |
hwTestCommonAlarmTrapsOIDs OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.2.2.0 |
hwTestRingSrcFailTrapThe btss ring source failed trap:
1: hwTestBoardIfIndex; 2: hwTestRingSrcAlarmReason (1: the ring source of BTSS doesn't work)
Troubleshooting suggestions: (1) Check the BTSS board; (2) Reset the BTSS board; (3) Replace the BTSS board.
This trap will send when the btss ring source failed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.2.0.1 |
hwTestRingSrcRestoreTrapTest ringing source restore trap:
1: hwTestBoardIfIndex; 2: hwTestRingSrcAlarmReason (1: the ring source of BTSS is normal)
The advice: none.
This trap will send when test ringing source restore. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.2.0.2 |
hwTestAutoClearedTrapTrap of test automatically cancelled:
1: hwTestBoardIfIndex; 2: hwTestBoardStatusTestedBoardIfIndex; 3: hwTestClearedReason.
This trap will send when the test automatically cancelled. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.2.0.3 |
hwTestCommonGeneralTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.2.3 |
hwTestCommonGeneralTrapsOIDs OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.21.1.2.3.0 |
hwLoopLineTestTrapThis trap will be sent when a loop-line test finished successfully. The trap shows
the result of the loop-line test.
1. hwLoopLineTestRequestID,
2. hwLoopLineTestStatus,
3. hwLoopLineTestConclusion,
4. hwLoopLineTestACAG,
5. hwLoopLineTestACBG,
6. hwLoopLineTestACAB,
7. hwLoopLineTestDCAG,
8. hwLoopLineTestDCBG,
9. hwLoopLineTestDCAB,
10. hwLoopLineTestRAG,
11. hwLoopLineTestRBG,
12. hwLoopLineTestRAB,
13. hwLoopLineTestCapAG,
14. hwLoopLineTestCapBG,
15. hwLoopLineTestCapAB,
16. hwLoopLineTestLR,
17. hwLoopLineTestRABResPole,
18. hwLoopLineTestMSocket,
19. hwLoopLineTestPPAResult,
19. hwLoopLineTestIfIndex,
20. hwLoopLineTestMoreDataFlag NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.3.0.1 |
hwMeterTestTrapMeter test result trap: 1: hwMeterTestStatus.
This trap will send when meter test result return. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.3.0.2 |
hwTestBoardDiagnoseTestTrapTest board self-test result trap:
1: hwTestBoardDiagnoseTestResult; 2: hwTestBoardDiagnoseTestRAM; 3: hwTestBoardDiagnoseTestVoltage;
4: hwTestBoardDiagnoseTestResistance;
5: hwTestBoardDiagnoseTestSignal; 6: hwTestBoardDiagnoseTestDTMF; 7: hwTestBoardDiagnoseTestRing;
8: hwTestBoardDiagnoseTestOnOffHook;
9: hwTestBoardDiagnoseTestPole; 10: hwTestBoardDiagnoseTestISDNU; 11: hwTestBoardDiagnoseTestBitErrCode;
12: hwTestBoardDiagnoseTestCapacitance.
This trap will send when the test board self-test result return. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.3.0.3 |
hwTestBoardStatusQueryTrapTest board status query result trap:
1: hwTestBoardStatusQueryResult; 2: hwTestBoardStatusQueryVersion; 3: hwTestBoardStatusQueryTestItem;
4: hwTestBoardStatusTestedBoardIfIndex.
This trap will send when the test board status query result return. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.3.0.4 |
hwTestOntPotsTestResultTrapThis trap indicates that a POTS port line test finished successfully, and shows
the result of the line test.
This trap will send when a POTS port line test finished successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.3.0.5 |
hwTestCommonMeltTestResultTrapThis trap indicates that MELT test finished successfully, and show
the result of the melt test
This trap will send when the MELT test finished successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.3.0.6 |
hwTestCommonMeltTestFaileTrapThis trap indicates that MELT test fails.
This trap will send when the MELT test failed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.21.1.2.3.0.7 |