HUAWEI-CES-MIB
AI MIB Summary
The HUAWEI-CES-MIB enables Network Management Systems to monitor and configure Circuit Emulation Service (CES) interfaces on Huawei devices, specifically tracking circuit status, synchronization states, and performance counters such as cell loss and delay.
The MIB is used for defining Huawei's CES management MIB objects, which provides CES management NMS interfaces.
Main OID:
hwCes.1.3.6.1.4.1.2011.5.11
174
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
174 total| Object Name |
|---|
hwCesThe MIB is used for defining Huawei's CES management MIB objects,
which provides CES management NMS interfaces. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.11 |
hwAtmCesServDescrExtTableCES service description extended table.
This table is used during the creation of the connection between the CES-SDT port and the CES-V35 port.
The index of this table is ifIndex. SEQUENCE OF HwAtmCesServDescrExtEntry .1.3.6.1.4.1.2011.5.11.1 |
hwAtmCesServDescrExtEntryCES service description extended table.
This table is used during the creation of the connection between the CES-SDT port and the CES-V35 port.
The index of this entry is ifIndex. HwAtmCesServDescrExtEntry .1.3.6.1.4.1.2011.5.11.1.1 |
hwAtmCesServDescrExtNValueThe N value of V35 port.rw Integer32 .1.3.6.1.4.1.2011.5.11.1.1.1 |
hwAtmCesServDescrExtBitMapThe timeslot bitmap in SDT mode.rw Unsigned32 .1.3.6.1.4.1.2011.5.11.1.1.2 |
hwAtmCesServDescrExtFillRateThe fillrate of cell.rw Integer32 .1.3.6.1.4.1.2011.5.11.1.1.3 |
hwAtmCesServDescrExtRowStatusThis object is used to create a
new row or modify or delete an
existing row in this table.
createAndGo(4),destroy(6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.11.1.1.4 |
hwAtmCesCfgTableCES board configration table.
The indexes of this table are hwFrameIndex and hwSlotIndex. SEQUENCE OF HwAtmCesCfgEntry .1.3.6.1.4.1.2011.5.11.2 |
hwAtmCesCfgEntryCES board configration table.
The indexes of this entry are hwFrameIndex and hwSlotIndex. HwAtmCesCfgEntry .1.3.6.1.4.1.2011.5.11.2.1 |
hwAtmCesCfgWorkModeCES board working mode.
Options:
1. tdm(1) - CES board working mode is tdm
2. e1(2) - CES board working mode is e1
3. v35(3) - CES board working mode is v35
4. idle(4) - CES board working mode is idle
5. indep(5) - CES board working mode is indeprw Enumeration .1.3.6.1.4.1.2011.5.11.2.1.1 |
hwAtmCesCfgDDNClockModeThe DDN clock mode of CES board.
Options:
1. line(1) - The DDN clock mode of CES board is line
2. srts(2) - The DDN clock mode of CES board is srtsrw Enumeration .1.3.6.1.4.1.2011.5.11.2.1.2 |
hwAtmCesCfgDDNClockSrcPortThe DDN clock source of CES board.rw Integer32 .1.3.6.1.4.1.2011.5.11.2.1.3 |
hwAtmCesCfgE1GroupType0E1 Group 0 (port 0~3) work mode.
Options:
1. cesE1(1) - E1 work mode is cesE1
2. tdmE1(2) - E1 work mode is tdmE1
3. ddnE1(3) - E1 work mode is ddnE1rw Enumeration .1.3.6.1.4.1.2011.5.11.2.1.4 |
hwAtmCesCfgE1GroupType1E1 Group 1 (port 4~7) work mode.
Options:
1. cesE1(1) - E1 work mode is cesE1
2. tdmE1(2) - E1 work mode is tdmE1
3. ddnE1(3) - E1 work mode is ddnE1rw Enumeration .1.3.6.1.4.1.2011.5.11.2.1.5 |
hwAtmCesCfgE1GroupType2E1 Group 2 (port 8~11) work mode.
Options:
1. cesE1(1) - E1 work mode is cesE1
2. tdmE1(2) - E1 work mode is tdmE1
3. ddnE1(3) - E1 work mode is ddnE1rw Enumeration .1.3.6.1.4.1.2011.5.11.2.1.6 |
hwAtmCesCfgE1GroupType3E1 Group 3 (port 12~15) work mode.
Options:
1. cesE1(1) - E1 work mode is cesE1
2. tdmE1(2) - E1 work mode is tdmE1
3. ddnE1(3) - E1 work mode is ddnE1rw Enumeration .1.3.6.1.4.1.2011.5.11.2.1.7 |
hwAtmCesCfgAccessModeBoard work mode.
Options:
1. e1(1) - E1
2. t1(2) - T1rw Enumeration .1.3.6.1.4.1.2011.5.11.2.1.8 |
hwAtmCesPortCfgTablePort configration table of CES board. The table is used to port configration
of CES board.
The index of this table is ifIndex. SEQUENCE OF HwAtmCesPortCfgEntry .1.3.6.1.4.1.2011.5.11.3 |
hwAtmCesPortCfgEntryPort configration table of CES board. The table is used to port configration
of CES board.
The index of this entry is ifIndex. HwAtmCesPortCfgEntry .1.3.6.1.4.1.2011.5.11.3.1 |
hwAtmCesPortCfgWorkModeThe working mode of port.
Options:
1. uni(1) - UNI mode
2. sdt(2) - SDT mode
3. udt(3) - UDT mode
4. idle(4) - Idle mode
5. ima(5) - IMA mode
6. invalidMode(-1) - Invalid moderw Enumeration .1.3.6.1.4.1.2011.5.11.3.1.1 |
hwAtmCesPortCfgClockModeThe clock mode of port.
Options:
1. system(1) - System clock
2. line(2) - Line clock
3. acm(3) - Acm clock
4. srts(4) - Srts clock
5. invalidClock(-1) - Invalid clockrw Enumeration .1.3.6.1.4.1.2011.5.11.3.1.2 |
hwAtmCesPortCfgSignalTypeSignal type of port.
Options:
1. ccs(1) - CCS signal
2. cas(2) - CAS signal
3. invalidSignal(-1) - Invalid signalrw Enumeration .1.3.6.1.4.1.2011.5.11.3.1.3 |
hwAtmCesPortCfgFrameVerifyModeFrame verify mode of port.
Options:
1. enable(1) - Open frame verify
2. disable(2) - Close frame verify
3. invalidOrNotSupport(-1) - Invalid or does not support frame verifyrw Enumeration .1.3.6.1.4.1.2011.5.11.3.1.4 |
hwAtmCesPortTimeSlotBMPTimeslot bitmap of port, 0 is the initial value of timeslot bitmap.ro Unsigned32 (0 | 2..4294967294) .1.3.6.1.4.1.2011.5.11.3.1.5 |
hwAtmCesPortCfgWarningStatusAlarm state of port.ro Unsigned32 .1.3.6.1.4.1.2011.5.11.3.1.6 |
hwAtmCesPortCfgUtopiaStatusUTOPIA port state.
Options:
1. normal(1) - Normal state
2. test(2) - Test state
3. idle(3) - Idle state
4. notExist(4) - Does not exist
5. fail(5) - Fail state
6. block(6) - Block statero Enumeration .1.3.6.1.4.1.2011.5.11.3.1.7 |
hwAtmCesPortCfgLiuStatusLIU port state.
Options:
1. normal(1) - Normal state
2. test(2) - Test state
3. idle(3) - Idle state
4. notExisted(4) - Does not exist
5. fail(5) - Fail state
6. block(6) - Block state
7. maintain(7) - Maintain state
8. localLoop(11) - Local-loop state
9. remoteLoop(12) - Remote-loop state
10. tsLocalLoop(13) - ts-Localloop state
11. payLoadLoop(14) - Payload-loop state
12. invalidStatus(-1) - Invalid statero Enumeration .1.3.6.1.4.1.2011.5.11.3.1.8 |
hwAtmCesPortCfgImpedanceImpedance of port.
Options:
1. ohm75(1) - 75 ohm
2. ohm120(2) - 120 ohm
3. ohm100(3) - 100 ohm
4. invalidImpedance(-1) - Invalid impedancerw Enumeration .1.3.6.1.4.1.2011.5.11.3.1.9 |
hwAtmCesPortCfgPhyStateE1 port physical state.
Options:
1. normal(0) - Normal state
2. fault(1) - Fault state
3. unknown(2) - Unknown statero Enumeration .1.3.6.1.4.1.2011.5.11.3.1.10 |
hwAtmCesPortCfgLoopLineStateE1 port line state.
Options:
1. synchronized(0) - Synchronized state
2. farEndAlarm(1) - Far-End-Alarm state
3. nearEndAlarm(2) - Near-End-Alarm state
4. testing(3) - Testing state
5. unknown(4) - Unknown statero Enumeration .1.3.6.1.4.1.2011.5.11.3.1.11 |
hwAtmCesPortCfgE1Frametypepvm-e1 port frame type.
Options:
1. pcm31(1) - PCM31 frame
2. unframe(2) - It's not a framerw Enumeration .1.3.6.1.4.1.2011.5.11.3.1.12 |
hwAtmCesPortAdminStatusPort operation type.
Options:
1. reset(1) - Reset port
2. selfcheck(2) - Self checkrw Enumeration .1.3.6.1.4.1.2011.5.11.3.1.13 |
hwAtmCesPCMErrorReportAlarmPCM error report configuration.
bit0: report alarm when pcm line fault occurs;
bit1: set PCM fault and set port to OOS state when ULF exceeds the threshold;
bit2: set PCM fault and set port to OOS state when OLF exceeds the threshold;
bit3: report event when LDT exceeds the threshold;
bit4: report event when frame slip exceeds the threshold;
bit5: report event when line temporary disturb occurs.ro Unsigned32 .1.3.6.1.4.1.2011.5.11.3.1.14 |
hwAtmCesPortCfgESAlarmThresholdErrored seconds alarm threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.3.1.15 |
hwAtmCesPortCfgCSESAlarmThresholdConsecutive severely errored seconds alarm threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.3.1.16 |
hwAtmCesPortCfgDMAlarmThresholdDegraded minutes alarm threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.3.1.17 |
hwAtmCesPortLineCodeConfiguration of the line encoding type.
Options:
1. hdb3(1) - HDB3 code
2. ami(2) - AMI code
3. b8zs(3) - B8ZS code
4. invalidCode(-1) - Invalid coderw Enumeration .1.3.6.1.4.1.2011.5.11.3.1.18 |
hwAtmCesPortAcmSourceConfiguration of adaptive clock source.rw Integer32 .1.3.6.1.4.1.2011.5.11.3.1.19 |
hwAtmCesPortCfgStateIndicates the configuration status of the subscriber type.
Options:
1. notConfigUserType(1) - Did not configure
2. configVoiceUserType(2) - Configured MG PRA subscriber
3. configPWUserType(3) - Configured Connection user
4. configNativeTDM(4) - Configured Native TDMro Enumeration .1.3.6.1.4.1.2011.5.11.3.1.20 |
hwAtmCesPortV35CfgTablePort configration table of V35.
This table is used to configure the CES-V35 port. The configuration includes reversing the clock and clock mode, blocking and unblocking the port, and querying the N value, status and alarm of the port.
The index of this table is ifIndex. SEQUENCE OF HwAtmCesPortV35CfgEntry .1.3.6.1.4.1.2011.5.11.4 |
hwAtmCesPortV35CfgEntryPort configration table of V35.
This table is used to configure the CES-V35 port. The configuration includes reversing the clock and clock mode, blocking and unblocking the port, and querying the N value, status and alarm of the port.
The index of this entry is ifIndex. HwAtmCesPortV35CfgEntry .1.3.6.1.4.1.2011.5.11.4.1 |
hwAtmCesPortV35CfgNValueN value of V35 port.ro Integer32 .1.3.6.1.4.1.2011.5.11.4.1.1 |
hwAtmCesPortV35CfgClockModeClock mode of port.
Options:
1. dceInternal(1) - Dec-Internal clock
2. dceSlave(2) - Dec-Slave clock
3. dceExternal(3) - Dec-External clock
4. dteInternal(4) - Dte-Internal clock
5. dteSlave(5) - Dte-Slave clock
6. dteExternal(6) - Dte-External clockrw Enumeration .1.3.6.1.4.1.2011.5.11.4.1.2 |
hwAtmCesPortV35CfgBlockStatusTo block or unblock the port, or to inquiry the block state.
Options:
1. block(1) - Block the port
2. unblock(2) - UnBlock the port
3. invalidStatus(-1) - Invalid statusrw Enumeration .1.3.6.1.4.1.2011.5.11.4.1.3 |
hwAtmCesPortV35CfgReversePhaseInverse the clock of V35 port, inquiry the clock state.
Options:
1. noInverse(1) - Not inverse state
2. inverse(2) - Inverse staterw Enumeration .1.3.6.1.4.1.2011.5.11.4.1.4 |
hwAtmCesPortV35CfgWarningStatusAlarm state of V35 port.ro Integer32 .1.3.6.1.4.1.2011.5.11.4.1.5 |
hwAtmCesPortV35CfgPortV35StatusPort state of V35.
Options:
1. idle(1) - Idle state
2. normal(2) - Normal state
3. localLoop(3) - Local loop state
4. remoteLoop(4) - Remote loop state
5. block(5) - Block state
6. fault(6) - Fault statero Enumeration .1.3.6.1.4.1.2011.5.11.4.1.6 |
hwAtmCesChnlStatisTableThe statistics table of CES channel. This table is used to
collect the cell data of the SDT port.
The index of this table is ifIndex. SEQUENCE OF HwAtmCesChnlStatisEntry .1.3.6.1.4.1.2011.5.11.5 |
hwAtmCesChnlStatisEntryThe statistics table of CES channel. This table is used to
collect the cell data of the SDT port.
The index of this entry is ifIndex. HwAtmCesChnlStatisEntry .1.3.6.1.4.1.2011.5.11.5.1 |
hwAtmCesChnlStatisCounter0Number of discarded cells due to Output Queue or Segmentation Buffer.ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.1 |
hwAtmCesChnlStatisCounter1Not used.ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.2 |
hwAtmCesChnlStatisCounter2Number of cells written to the Reassembly Buffer. It excludes cells that were discarded for any
reason and cells that are inserted instead of lost cells (atmfReassembledCells).ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.3 |
hwAtmCesChnlStatisCounter3Number of times incomingMFB pulse is not synchronous to SDT start of structure upstream (AAL1).ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.4 |
hwAtmCesChnlStatisCounter4Number of cells causing a Reassembly Buffer overflow (AAL0 & AAL1). It includes accepted cells
that are causing the filling level to exceed the predefined threshold and discarded cells due to
the attempt of writing to the Reassembly Buffer when the threshold is already exceeded.ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.5 |
hwAtmCesChnlStatisCounter5Number of end of Reassembly Buffer overflow (AAL0 & AAL1). The value is incremented upon acceptance
of the next cell after Reassembly Buffer overflow.ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.6 |
hwAtmCesChnlStatisCounter6The count of the number of AAL1 header errors detected including those corrected. Header errors include
correctable and uncorrectable CRC, plus bad parity. (atmfCESHdrErrors).ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.7 |
hwAtmCesChnlStatisCounter7Number of times that the sequence number of an
incoming AAL1 SARPDU causes a transition of the
SC algorithm from 'sync' to 'out of sequence' and
from 'invalid' to 'out of sync'.ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.8 |
hwAtmCesChnlStatisCounter8Number of downstream 'misinserted cells' detected by the AAL1 sequence count
algorithm (atmfCESMisinsertedCells).ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.9 |
hwAtmCesChnlStatisCounter9Number of downstream cells discarded by the AAL1 sequence count algorithm.ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.10 |
hwAtmCesChnlStatisCounter10Number of rejected AAL1 SDT pointers due to parity error or wrong pointer value (93 < pointer <127).ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.11 |
hwAtmCesChnlStatisCounter11Number of SC cycles with more than one AAL1 SDT pointer field if only one pointer is expected (sdt_once = 1).ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.12 |
hwAtmCesChnlStatisCounter12Number of start of reassembly buffer underflow (AAL0 & AAL1) (atmfCESBufUnderflow).ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.13 |
hwAtmCesChnlStatisCounter13Number of inserted starvation cells (AAL0 & AAL1) due to reassembly buffer underflow.ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.14 |
hwAtmCesChnlStatisCounter14Number of times the Reassembly Buffer is re-initialized due to AAL1 start of structure
is out of sync with port start of structure.This records the count of the number of events
in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the
pointer must be reacquired. This count is only meaningful for structured CES. (atmfCESPointerReframes).ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.15 |
hwAtmCesChnlStatisCounter15Number of downstream 'Lost cells' detected by the AAL1 sequence count algorithm (atmfCESLostCells).ro Counter32 .1.3.6.1.4.1.2011.5.11.5.1.16 |
hwAtmCesChnlStatisOperThe operating code of clearing the statistics of CES SDT port.
Options:
1. clear(1) - Clear the statistics of CES SDT portrw Enumeration .1.3.6.1.4.1.2011.5.11.5.1.17 |
hwAtmCesUDTPortStatisTableThe statistics table of CES UDT port.
This table is used to collect the cell data of the UDT port.
The index of this table is ifIndex. SEQUENCE OF HwAtmCesUDTPortStatisEntry .1.3.6.1.4.1.2011.5.11.6 |
hwAtmCesUDTPortStatisEntryThe statistics table of CES UDT port.
This table is used to collect the cell data of the UDT port.
The index of this entry is ifIndex. HwAtmCesUDTPortStatisEntry .1.3.6.1.4.1.2011.5.11.6.1 |
hwAtmCesUDTPortStatisCounter0Number of discarded cells due to Output Queue or Segmentation Buffer.ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.1 |
hwAtmCesUDTPortStatisCounter1Not used.ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.2 |
hwAtmCesUDTPortStatisCounter2Number of cells written to the Reassembly Buffer. It excludes cells that were discarded
for any reason and cells that are inserted instead of lost cells (atmfReassembledCells).ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.3 |
hwAtmCesUDTPortStatisCounter3Number of times incomingMFB pulse is not synchronous to SDT start of structure upstream (AAL1).ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.4 |
hwAtmCesUDTPortStatisCounter4Number of cells causing a Reassembly Buffer overflow (AAL0 & AAL1). It includes accepted cells
that are causing the filling level to exceed the predefined threshold and discarded cells due to
the attempt of writing to the Reassembly Buffer when the threshold is already exceeded.ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.5 |
hwAtmCesUDTPortStatisCounter5Number of end of Reassembly Buffer overflow (AAL0 & AAL1). The value is incremented upon acceptance
of the next cell after Reassembly Buffer overflow.ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.6 |
hwAtmCesUDTPortStatisCounter6The count of the number of AAL1 header errors detected including those corrected. Header errors include
correctable and uncorrectable CRC, plus bad parity. (atmfCESHdrErrors).ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.7 |
hwAtmCesUDTPortStatisCounter7Number of times that the sequence number of
an incoming AAL1 SARPDU causes a transition of
the SC algorithm from 'sync' to 'out of sequence'
and from 'invalid' to 'out of sync'.ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.8 |
hwAtmCesUDTPortStatisCounter8Number of downstream 'misinserted cells' detected by the AAL1 sequence count algorithm (atmfCESMisinsertedCells).ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.9 |
hwAtmCesUDTPortStatisCounter9Number of downstream cells discarded by the AAL1 sequence count algorithm.ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.10 |
hwAtmCesUDTPortStatisCounter10Number of rejected AAL1 SDT pointers due to parity error or wrong pointer value (93 < pointer <127).ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.11 |
hwAtmCesUDTPortStatisCounter11Number of SC cycles with more than one AAL1 SDT pointer field if only one pointer is expected (sdt_once = 1).ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.12 |
hwAtmCesUDTPortStatisCounter12Number of start of reassembly buffer underflow (AAL0 & AAL1) (atmfCESBufUnderflow).ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.13 |
hwAtmCesUDTPortStatisCounter13Number of inserted starvation cells (AAL0 & AAL1) due to reassembly buffer underflow.ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.14 |
hwAtmCesUDTPortStatisCounter14Number of times the Reassembly Buffer is re-initialized due to AAL1 start of structure is out of
sync with port start of structure.This records the count of the number of events in which the AAL1
reassembler found that an SDT pointer is not where it is expected, and the pointer must be reacquired.
This count is only meaningful for structured CES. (atmfCESPointerReframes).ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.15 |
hwAtmCesUDTPortStatisCounter15Number of downstream 'lost cells' detected by the AAL1 sequence count algorithm (atmfCESLostCells).ro Counter32 .1.3.6.1.4.1.2011.5.11.6.1.16 |
hwAtmCesUDTPortStatisOperThe operating code of clearing the statistics of CES UDT port.
Options:
1. clear(1) - Clear the statistics of CES UDT portrw Enumeration .1.3.6.1.4.1.2011.5.11.6.1.17 |
hwAtmCesUNIPortStatisTableThe statistics table of CES UNI port.
This table is used to collect the cell data of the UNI port.
The index of this table is ifIndex. SEQUENCE OF HwAtmCesUNIPortStatisEntry .1.3.6.1.4.1.2011.5.11.7 |
hwAtmCesUNIPortStatisEntryThe statistics table of CES UNI port.
This table is used to collect the cell data of the UNI port.
The index of this entry is ifIndex. HwAtmCesUNIPortStatisEntry .1.3.6.1.4.1.2011.5.11.7.1 |
hwAtmCesUNIPortStatisCounter0Number of discarded cells due to output queue, ATM Receive Buffer.ro Counter32 .1.3.6.1.4.1.2011.5.11.7.1.1 |
hwAtmCesUNIPortStatisCounter1Number of received cells with corrected HEC errors.ro Counter32 .1.3.6.1.4.1.2011.5.11.7.1.2 |
hwAtmCesUNIPortStatisCounter2Number of received cells with non-corrected HEC errors.ro Counter32 .1.3.6.1.4.1.2011.5.11.7.1.3 |
hwAtmCesUNIPortStatisCounter3Number of times cell delineation SYNC state is left, except when forced.ro Counter32 .1.3.6.1.4.1.2011.5.11.7.1.4 |
hwAtmCesUNIPortStatisCounter4Number of discarded cells due to ATM transmit buffer overflow.ro Counter32 .1.3.6.1.4.1.2011.5.11.7.1.5 |
hwAtmCesUNIPortStatisOperThe operating code of clearing the statistics of CES UNI port.
Options:
1. clear(1) - Clear the statistics of CES UNI portrw Enumeration .1.3.6.1.4.1.2011.5.11.7.1.6 |
hwAtmCesPortMaintTableThe maintenace table of CES port.
This table is used to set the loopback of the CES port, including the local loopback (LL), remote loopback (RL), and timeslot loopback.
The timeslot loopback takes effect only on the CES-SDT port.
The index of this table is ifIndex. SEQUENCE OF HwAtmCesPortMaintEntry .1.3.6.1.4.1.2011.5.11.8 |
hwAtmCesPortMaintEntryThe maintenace table of CES port.
This table is used to set the loopback of the CES port, including the local loopback (LL), remote loopback (RL), and timeslot loopback.
The timeslot loopback takes effect only on the CES-SDT port.
The index of this entry is ifIndex. HwAtmCesPortMaintEntry .1.3.6.1.4.1.2011.5.11.8.1 |
hwAtmCesPortMaintLoopThe looping test mode of CES port.
Options:
1. noLoop(1) - No-loop test
2. localLoop(2) - Local-loop test
3. remoteLoop(3) - Remote-loop test
4. tsLocalLoop(4) - Ts-Localloop test
5. payLoadLoop(5) - Payload-loop testrw Enumeration .1.3.6.1.4.1.2011.5.11.8.1.1 |
hwAtmCesPortMaintOperThe oprating of looping test mode.
Options:
1. set(1) - Set looping test
2. clear(2) - Clear looping test
3. notSupportQuery(-1) - Not support queryrw Enumeration .1.3.6.1.4.1.2011.5.11.8.1.2 |
hwAtmCesPortMaintSingleTimeslotIdThe timeslot number of single timeslot looping test.rw Integer32 .1.3.6.1.4.1.2011.5.11.8.1.3 |
hwCesECSMonitorControlTableE1 monitor status control table.
The indexes of this table are ifIndex and hwCesECSMonitorPeriodType. SEQUENCE OF HwCesECSMonitorControlEntry .1.3.6.1.4.1.2011.5.11.11 |
hwCesECSMonitorControlEntryE1 monitor status control table.
The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType. HwCesECSMonitorControlEntry .1.3.6.1.4.1.2011.5.11.11.1 |
hwCesECSMonitorPeriodTypeMonitor period type.
Options:
1. quarter(1) - Quarter
2. day(2) - Dayrw Enumeration .1.3.6.1.4.1.2011.5.11.11.1.1 |
hwCesECSMonitorStatusRealCurrent monitor status, 0:disable, 1:enable.
Options:
1. disable(0) - Disable current monitor
2. enable(1) - Enable current monitorro Enumeration .1.3.6.1.4.1.2011.5.11.11.1.2 |
hwCesECSMonitorStartTimeRealThe start time of the monitor.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.11.11.1.3 |
hwCesECSMonitorStatusUserSetThe monitor status set by user.
Options:
1. disable(0) - Set monitor close
2. enable(1) - Set monitor openrw Enumeration .1.3.6.1.4.1.2011.5.11.11.1.4 |
hwCesECSMonitorStartTimeUserSetThe start time of the monitor set by user.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.11.11.1.5 |
hwCesECSThresholdControlTableE1 threshold enable table.
The indexes of this table are ifIndex and hwCesECSMonitorPeriodType. SEQUENCE OF HwCesECSThresholdControlEntry .1.3.6.1.4.1.2011.5.11.12 |
hwCesECSThresholdControlEntryE1 threshold enable table.
The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType. HwCesECSThresholdControlEntry .1.3.6.1.4.1.2011.5.11.12.1 |
hwCesECSThresholdEnabledE1 threshold enable.
Options:
1. disable(0) - Disable the E1 threshold
2. enable(1) - Enable the E1 thresholdrw Enumeration .1.3.6.1.4.1.2011.5.11.12.1.1 |
hwCesECSThresholdTableE1 monitor threshold table.
The indexes of this table are ifIndex and hwCesECSMonitorPeriodType. SEQUENCE OF HwCesECSThresholdEntry .1.3.6.1.4.1.2011.5.11.13 |
hwCesECSThresholdEntryE1 monitor threshold table.
The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType. HwCesECSThresholdEntry .1.3.6.1.4.1.2011.5.11.13.1 |
hwCesECSThresholdLowESErrored seconds low threshold.rw Gauge32 .1.3.6.1.4.1.2011.5.11.13.1.1 |
hwCesECSThresholdHighESErrored seconds high threshold.rw Gauge32 .1.3.6.1.4.1.2011.5.11.13.1.2 |
hwCesECSThresholdSESSeverely errored seconds threshold.rw Gauge32 .1.3.6.1.4.1.2011.5.11.13.1.3 |
hwCesECSThresholdUASUnavailable seconds threshold.rw Gauge32 .1.3.6.1.4.1.2011.5.11.13.1.4 |
hwCesECSThresholdCESCConsecutive severely errored seconds threshold.rw Gauge32 .1.3.6.1.4.1.2011.5.11.13.1.5 |
hwCesECSDateTableE1 perform monitor statistic table.
The indexes of this table are ifIndex, hwCesECSMonitorPeriodType and hwCesECSMonitorStage. SEQUENCE OF HwCesECSDateEntry .1.3.6.1.4.1.2011.5.11.14 |
hwCesECSDateEntryE1 perform monitor statistic table.
The indexes of this entry are ifIndex, hwCesECSMonitorPeriodType and hwCesECSMonitorStage. HwCesECSDateEntry .1.3.6.1.4.1.2011.5.11.14.1 |
hwCesECSMonitorStagePerform monitor period stage, 0:current, 1:history
Options:
1. current(0) - The perform monitor period is current
2. history(1) - The perform monitor period is historyro Enumeration .1.3.6.1.4.1.2011.5.11.14.1.1 |
hwCesECSMonitorStageStartTimeThe start time of the monitor period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.11.14.1.2 |
hwCesECSDataESStatistic of the errored seconds.ro Gauge32 .1.3.6.1.4.1.2011.5.11.14.1.3 |
hwCesECSDataSESStatistic of the severe errors.ro Gauge32 .1.3.6.1.4.1.2011.5.11.14.1.4 |
hwCesECSDataUASStatistic of the unavailable seconds.ro Gauge32 .1.3.6.1.4.1.2011.5.11.14.1.5 |
hwAtmCesSubboardWorkModeTableCES board configration table.
The indexes of this table are hwFrameIndex and hwSlotIndex. SEQUENCE OF HwAtmCesSubboardWorkModeEntry .1.3.6.1.4.1.2011.5.11.15 |
hwAtmCesSubboardWorkModeEntryCES board configration table.
The indexes of this entry are hwFrameIndex and hwSlotIndex. HwAtmCesSubboardWorkModeEntry .1.3.6.1.4.1.2011.5.11.15.1 |
hwAtmCesSubboardWorkModeCES subboard working mode.
Options:
1. loadsharing(1) - The CES subboard works in loadsharing mode
2. activestandby(2) - The CES subboard works in activestandby moderw Enumeration .1.3.6.1.4.1.2011.5.11.15.1.1 |
hwCesECSThresholdParameterTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.11.16 |
hwCesErroredSecondsErrored seconds degrade threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.1 |
hwCesConsecutiveSeverelyErroredSecondsConsecutive severely errored seconds degrade threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.2 |
hwCesDegradedMinutesDegraded Minutes degrade threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.3 |
hwCesPortUnconditionalLineFailureErroredRateLine Unconditional Blooey Errored Rate threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.4 |
hwCesPortOptionalLineFailureErroredRateLine Conditional Blooey Errored Rate threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.5 |
hwCesPortLineDisturbanceTransientErroredRateLine Temporary Disturb Errored Rate threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.6 |
hwCesPortG704ExcessiveFrameSlipfrequencyOverfull Frame Slip threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.7 |
hwCesDefinedErroredSecondsErrored Seconds Define threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.8 |
hwCesDefinedSeverelyErroredSecondsSeverely Errored Seconds Define threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.9 |
hwCesDefinedDegradedMinutesDegraded Minutes Define threshold.rw Integer32 .1.3.6.1.4.1.2011.5.11.16.10 |
hwAtmCesPortCESoPCLKTableAdaptive clock source configuration table.
The indexes of this table are hwFrameIndex, hwSlotIndex and hwAtmCesPortCESoPCLKIndex. SEQUENCE OF HwAtmCesPortCESoPCLKEntry .1.3.6.1.4.1.2011.5.11.17 |
hwAtmCesPortCESoPCLKEntryAdaptive clock source configuration table.
The indexes of this entry are hwFrameIndex, hwSlotIndex and hwAtmCesPortCESoPCLKIndex. HwAtmCesPortCESoPCLKEntry .1.3.6.1.4.1.2011.5.11.17.1 |
hwAtmCesPortCESoPCLKIndexThe index of adaptive clock source. Integer32 .1.3.6.1.4.1.2011.5.11.17.1.1 |
hwAtmCesPortCESoPCLKBindPWSet and get the Connection ID binding with the adaptive clock source.rw Unsigned32 .1.3.6.1.4.1.2011.5.11.17.1.2 |
hwAtmCesPortCESoPCLKSetFlagGet and set the configuration of adaptive clock source.
Options:
1. null(1) - The clock source is null
2. exist(2) - The clock source existrw Enumeration .1.3.6.1.4.1.2011.5.11.17.1.3 |
hwAtmCesPortCESoPCLKStateGet the running state of adaptive clock source.
Options:
1. normal(1) - Normal state
2. fault(2) - Fault statero Enumeration .1.3.6.1.4.1.2011.5.11.17.1.4 |
hwAtmCesPortCESoPLineCLKPortIdSet and get the Port ID binding with the Line clock source.rw Integer32 .1.3.6.1.4.1.2011.5.11.17.1.5 |
hwAtmCesPortCESoPLineCLKStateGet the running state of Line clock source.
Options:
1. normal(1) - Normal state
2. fault(2) - Fault statero Enumeration .1.3.6.1.4.1.2011.5.11.17.1.6 |
hwCesTDMVCLCfgTableTDM VCL configuration table.
The indexes of this table are hwTDMVCLID and ifIndex. SEQUENCE OF HwCesTDMVCLCfgEntry .1.3.6.1.4.1.2011.5.11.18 |
hwCesTDMVCLCfgEntryTDM VCL configuration table.
The indexes of this entry are hwTDMVCLID and ifIndex. HwCesTDMVCLCfgEntry .1.3.6.1.4.1.2011.5.11.18.1 |
hwTDMVCLIDTDM VCL ID. Unsigned32 .1.3.6.1.4.1.2011.5.11.18.1.1 |
hwTDMVCLTypeTDM VCL type.
Options:
1. satop(1) - The TDM VCL Type is satop
2. cesop(2) - The TDM VCL Type is cesoprw Enumeration .1.3.6.1.4.1.2011.5.11.18.1.2 |
hwTDMVCLTimeslotTDM timeslot, it must be set if hwTDMVCLType is set to be cesop.rw Unsigned32 .1.3.6.1.4.1.2011.5.11.18.1.3 |
hwTDMVCLRowStatusRow operation node . Running status cannot be deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.11.18.1.4 |
hwCesTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.11.19 |
hwAtmCesPortStatusIndicate the port state.
Options:
1. normal(1) - The port is in normal state
2. test(2) - The port is in test state
3. idle(3) - The port is in idle state
4. notExisted(4) - The port doesn't exist
5. fail(5) - The port is in fail state
6. block(6) - The port is in block state
7. maintain(7) - The port is in maintain state
8. loopback(11) - The port is in loopback statero Enumeration .1.3.6.1.4.1.2011.5.11.19.1 |
hwCesTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.11.20 |
hwCesCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.11.20.1 |
hwCesCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.11.20.1.0 |
hwCesPortStatusTrapThis trap message is generated when Ces port status changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.1.0.1 |
hwCesBoardWorkModeChangeTrapThis trap message is generated when E1T1 board work mode changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.1.0.2 |
hwCesPortWorkModeChangeTrapThis trap message is generated when Ces port work mode changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.1.0.3 |
hwCesAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.11.20.2 |
hwCesAlarmTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.11.20.2.0 |
hwCesPortSignalLossAlarmTrapThis trap message is generated when Loss of signal occurs at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.1 |
hwCesFrameLossAlarmTrapThis trap message is generated when Loss of frame alignment occurs at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.2 |
hwCesRemoteAlarmReceivedAlarmTrapThis trap message is generated when remote alarm occurs at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.3 |
hwCesMultiframeLossAlarmTrapThis trap message is generated when Loss of multiframe alignment occurs at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.4 |
hwCesSignalOccurAlarmTrapThis trap message is generated when signal occurs at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.5 |
hwCesCRC4ErrorOccurAlarmTrapThis trap message is generated when CRC4 error occurs at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.6 |
hwCesLOSRecoverAlarmTrapThis trap message is generated when Loss of signal(LOS) recover at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.7 |
hwCesFrameRecoverAlarmTrapThis trap message is generated when Loss of frame recover at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.8 |
hwCesRemoteAlarmRecoverAlarmTrapThis trap message is generated when Remote alarm recover at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.9 |
hwCesMultiframeRecoverAlarmTrapThis trap message is generated when Loss of multiframe alignment recover at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.10 |
hwCesSignalRecoverAlarmTrapThis trap message is generated when signal recover at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.11 |
hwCesCRC4RecoverAlarmTrapThis trap message is generated when CRC4 recover at the E1/T1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.12 |
hwCesACMClockRestoreAlarmTrapThis trap message is generated when ACM clock restore. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.13 |
hwCesACMClockFaultAlarmTrapThis trap message is generated when ACM clock fault. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.11.20.2.0.14 |