HUAWEI-BRAS-DPI-MIB
AI MIB Summary
The HUAWEI-BRAS-DPI-MIB module enables monitoring and management of Deep Packet Inspection (DPI) statistics and session states on Huawei Broadband Remote Access Server (BRAS) devices. It tracks critical performance metrics including active user sessions, protocol distribution, traffic volume per application, and DPI engine resource utilization to support bandwidth management and service quality assurance.
Description.
Main OID:
hwBRASDpi.1.3.6.1.4.1.2011.5.25.40.16
17
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
hwBRASDpiDescription. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.40.16 |
hwDpiPolicyObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.40.16.1 |
hwDpiPolicyTableDPI Service Policy Configuration. SEQUENCE OF HwDpiPolicyEntry .1.3.6.1.4.1.2011.5.25.40.16.1.1 |
hwDpiPolicyEntryDpi Policy Entry.
The dpi policy table is uniquely identified by the policy name. The policy name is the key word entered when the policy table is created, and cannot be changed.
The index is hwDpiPolicyName.
This table is used to configure the dpi policy.
The description of operation constraints is as follows:
1.The DPI policy name must be entered when the policy table is created.
2.The DPI policy cannot be changed if it is referenced by some user.
3.The current DPI policy cannot be deleted if it is referenced by some domain. HwDpiPolicyEntry .1.3.6.1.4.1.2011.5.25.40.16.1.1.1 |
hwDpiServiceTypeService Type.
P2P/OTHER.rw Enumeration .1.3.6.1.4.1.2011.5.25.40.16.1.1.1.1 |
hwDpiPolicyNameDpi Policy Name.
The policy name is the key word entered when the policy table is created, and cannot be changed later.
The DPI policy name is assigned when DPI policy is created.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.40.16.1.1.1.2 |
hwDpiUpBehaviorNameUp Behavior Name.
Binding up DPI behavior policy is choosen to do, if up DPI behavior is binded, it need assingn behavior name.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.40.16.1.1.1.3 |
hwDpiDownBehaviorNameDown Behavior Name.
Binding down DPI behavior policy is choosen to do, if down DPI behavior is binded, it need assingn behavior name.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.40.16.1.1.1.4 |
hwDpiPolicyRowStatusRow admin status,either Add or Del.
Supports add and delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.40.16.1.1.1.5 |
hwDpiBehaviorTable SEQUENCE OF HwDpiBehaviorEntry .1.3.6.1.4.1.2011.5.25.40.16.1.2 |
hwDpiBehaviorEntryDpi Behavior Entry.
The dpi behavior table is uniquely identified by the behavior name. The behavior name is the key word entered when the behavior table is created, and cannot be changed.
The index is hwDpiBehaviorName.
This table is used to configure the dpi behavior.
The description of operation constraints is as follows:
1.The DPI behavior name must be entered when the behavior table is created.
2.The DPI behavior cannot be changed if it is referenced by some DPI policy.
3.The current DPI behavior cannot be deleted if it is referenced by global application. HwDpiBehaviorEntry .1.3.6.1.4.1.2011.5.25.40.16.1.2.1 |
hwDpiBehaviorNameDpi Behavior Name.
The behavior name is the key word entered when the behavior table is created, and cannot be changed.
The DPI behavior name is assigned when DPI behavior is created.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.40.16.1.2.1.1 |
hwDpiBehaviorCarCirDpi Car Cir.
Car Cir.rw Integer32 .1.3.6.1.4.1.2011.5.25.40.16.1.2.1.2 |
hwDpiBehaviorRowStatusRow admin status,either Add or Del.
Supports add and delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.40.16.1.2.1.3 |
hwDpiConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.40.16.2 |
hwDpiCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.40.16.2.1 |
hwDpiGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.40.16.2.2 |