HUAWEI-ANCP-AN-EXT-MIB
AI MIB Summary
The HUAWEI-ANCP-AN-EXT-MIB module extends the Huawei Access Node Control Protocol (ANCP) management interface on NAS and access nodes to monitor and control tight QoS policies, multicast replication states, subscriber accounting statistics, and fault isolation metrics. It enables the enforcement of user-specific multicast authorization and the retrieval of detailed access network performance data for service management and OSS integration.
The extend MIB module is used for defining Huawei's Access Node Control Protocol (ANCP) MIB objects. ANCP is a dedicated control protocol between NAS and access nodes can facilitate NAS-managed tight QOS control in the access network, simplified OSS infrastructure for service management, optimized multicast replication to enable video services over DSL, subscriber statistics retrieval on the NAS for accounting purposes, and fault isolation capability on the NAS for the underlying access technology. Controllable multicast allows an access device to determine if a user has the authority to watch programs by identifying the user request packets. In this way, the access device controls and forwards the multicast services.
Main OID:
hwAncpAnExtMIB.1.3.6.1.4.1.2011.5.110
63
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
63 total| Object Name |
|---|
hwAncpAnExtMIBThe extend MIB module is used for defining Huawei's Access Node Control
Protocol (ANCP) MIB objects.
ANCP is a dedicated control protocol between NAS and access nodes
can facilitate NAS-managed tight QOS control in the access network,
simplified OSS infrastructure for service management, optimized multicast
replication to enable video services over DSL, subscriber statistics
retrieval on the NAS for accounting purposes, and fault isolation
capability on the NAS for the underlying access technology. Controllable
multicast allows an access device to determine if a user has the authority
to watch programs by identifying the user request packets. In this way,
the access device controls and forwards the multicast services. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.110 |
hwAncpAnObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.110.1 |
hwAncpAnTopoDiscoveryModeThe object indicates the mode of reporting ANCP topology discovery.
Enumerated value.
Options:
1. port(1) -indicates the mode of reporting ANCP topology discovery is port
2. servicePort(2) -indicates the mode of reporting ANCP topology discovery is serviceport
Default: servicePort(2)rw Enumeration .1.3.6.1.4.1.2011.5.110.1.1 |
hwAncpAnDraftVersionANCP draft version.
Options:
1. draft00(0) -indicates that draft draft-wadhwa-gsmp-l2control-configuration-00 is supported
2. draft01(1) -indicates that draft draft-ietf-ancp-protocol-01 is supported
3. draft02(2) -indicates that draft draft-ietf-ancp-protocol-02 is supported
Default: draft01(1)rw Enumeration .1.3.6.1.4.1.2011.5.110.1.2 |
hwAncpAnPortBeginThis object is used to configure the start port ID in the circuit ID information of the ANCP message.
Range: 0-1
Default: 0rw Unsigned32 .1.3.6.1.4.1.2011.5.110.1.3 |
hwAncpAnSessionConfigTableThis table represents the ANCP sessions in the access node. An entry in this table needs to be configured (created)
before an ANCP session might be started.
The index of this table is ancpAnSessionConfigSessionId. SEQUENCE OF HwAncpAnSessionConfigEntry .1.3.6.1.4.1.2011.5.110.1.4 |
hwAncpAnSessionConfigEntryThis table represents the ANCP sessions in the access node. An entry in this table needs to be configured (created)
before an ANCP session might be started.
The index of this entry is ancpAnSessionConfigSessionId. HwAncpAnSessionConfigEntry .1.3.6.1.4.1.2011.5.110.1.4.1 |
hwAncpAnSessionConfigOamThresholdThe OAM threshold in this session.
Range: 1-100
Default: 100rw Unsigned32 .1.3.6.1.4.1.2011.5.110.1.4.1.1 |
hwAncpAnSessionConfigRollDefaultFlagThe flag indicates whether rollback is permitted when link configuration fails.
Options:
1. true(1) -rollback is permitted when link configuration fails
2. false(2) -rollback is not permitted when link configuration fails
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.110.1.4.1.2 |
hwAncpAnSessionConfigBandwidthCacSwitchThe switch of ANCP bandwidthCAC in this session.
Options:
1. true(1)
2. false(2)
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.110.1.4.1.3 |
hwAncpAnSessionConfigForceNoPartitionThe switch of ANCP force no partition in this session.
Options:
1. true(1) -indicates that the partition is zero in ANCP packet
2. false(2) -indicates that the partition is the configuration in ANCP packet
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.110.1.4.1.4 |
hwAncpAnCurrentSessionTableIt is the Huawei proprietary ANCP session status table. It is queried to
obtain the cause of failure to establish a session and check whether
the cause is inconsistency in capability set negotiation. It supports
the query function.
The index of this table is ancpAnSessionConfigSessionId. SEQUENCE OF HwAncpAnCurrentSessionEntry .1.3.6.1.4.1.2011.5.110.1.5 |
hwAncpAnCurrentSessionEntryIt is the Huawei proprietary ANCP session status table. It is queried to
obtain the cause of failure to establish a session and check whether
the cause is inconsistency in capability set negotiation. It supports
the query function.
The index of this entry is ancpAnSessionConfigSessionId. HwAncpAnCurrentSessionEntry .1.3.6.1.4.1.2011.5.110.1.5.1 |
hwAncpAnCurrentSessionDiagnosticThis object indicates the diagnose result when a session fails to be established.
Options:
1. noDiagnostic(1) -indicates no diagnostic information
2. capabilityNegotiationFailure(2) -indicates capability negotiation failurero Enumeration .1.3.6.1.4.1.2011.5.110.1.5.1.1 |
hwAncpAnCurrentSessionPartitionUsedStatusThis object indicates the partition used status.
Options:
1. used(1) -the partition is used
2. unused(2) -the partition is unused
3. unknow(255) -the session is not establishedro Enumeration .1.3.6.1.4.1.2011.5.110.1.5.1.2 |
hwAncpAnInterfaceConfigTableAn entry in the table showing the partition id for a
specific user facing interface.
The index of this table is ifIndex. SEQUENCE OF HwAncpAnInterfaceConfigEntry .1.3.6.1.4.1.2011.5.110.1.6 |
hwAncpAnInterfaceConfigEntryAn entry in the table showing the partition id for a
specific user facing interface.
The index of this entry is ifIndex. HwAncpAnInterfaceConfigEntry .1.3.6.1.4.1.2011.5.110.1.6.1 |
hwAncpAnInterfaceEnableThis object specifies whether the user facing interface is managed by ANCP.
Options:
1. true(1) -indicates the user facing interface is managed by ANCP
2. false(2) -indicates the user facing interface is not managed by ANCPrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.110.1.6.1.1 |
hwAncpAnInterfaceEncapTypeThis object indicates the access type of the user.
Options:
1. atm(1) -indicates the access type of user is ATM
2. eth(2) -indicates the access type of user is ETH
3. auto(3) -indicates the access type of user is auto mode. In this mode,
the CID reported by ANCP is related with DSL profile
4. invalid(-1) -indicates the access type of user is invalidrw Enumeration .1.3.6.1.4.1.2011.5.110.1.6.1.2 |
hwAncpAnInterfacePara1In the case of user interface in ATM access, this parameter is valid
indicating the VPI of the user interface.rw Unsigned32 .1.3.6.1.4.1.2011.5.110.1.6.1.3 |
hwAncpAnInterfacePara2In the case of user interface in ATM access, this parameter is valid
indicating the VCI of the user interface.rw Unsigned32 .1.3.6.1.4.1.2011.5.110.1.6.1.4 |
hwAncpAnInterfacePara3In the case of user interface in ETH access, this parameter is valid
indicating the VLAN of the user.rw Unsigned32 .1.3.6.1.4.1.2011.5.110.1.6.1.5 |
hwAncpAnPartitionTableThis table is used to configure the circuit IDs in batches for all ports in a
certain partition on an access node. This table can only used to get the circuit
IDs of one port assoicated with the partition. If you need to obtain the current
circuit ID configured for a certain port, you can specify a port to be queried
in hwAncpAnInterfaceConfigTable. The index of this table is hwAncpAnPartitionId. SEQUENCE OF HwAncpAnPartitionEntry .1.3.6.1.4.1.2011.5.110.1.7 |
hwAncpAnPartitionEntryThis table is used to configure the circuit IDs in batches for all ports in a
certain partition on an access node. This table can only used to get the circuit
IDs of one port assoicated with the partition. If you need to obtain the current
circuit ID configured for a certain port, you can specify a port to be queried
in hwAncpAnInterfaceConfigTable. The index of this entry is hwAncpAnPartitionId. HwAncpAnPartitionEntry .1.3.6.1.4.1.2011.5.110.1.7.1 |
hwAncpAnPartitionIdThis object specifies whether the user facing interface is managed by ANCP.rw Unsigned32 .1.3.6.1.4.1.2011.5.110.1.7.1.1 |
hwAncpAnPartitionInterfaceEncapTypeThis object indicates the access type of the user.
Options:
1. atm(1) -indicates the access type of user is ATM
2. eth(2) -indicates the access type of user is ETH
3. auto(3) -indicates the access type of user is auto mode. In this mode,
the CID reported by ANCP is related with DSL profilerw Enumeration .1.3.6.1.4.1.2011.5.110.1.7.1.2 |
hwAncpAnPartitionInterfacePara1In the case of user interface in ATM access, this parameter is valid
indicating the VPI of the user interface.
Range: 0-4095rw Unsigned32 .1.3.6.1.4.1.2011.5.110.1.7.1.3 |
hwAncpAnPartitionInterfacePara2In the case of user interface in ATM access, this parameter is valid
indicating the VCI of the user interface.
Range: 32-65535rw Unsigned32 .1.3.6.1.4.1.2011.5.110.1.7.1.4 |
hwAncpAnPartitionInterfacePara3In the case of user interface in ETH access, this parameter is valid
indicating the VLAN of the user.
Range: 1-4095rw Unsigned32 .1.3.6.1.4.1.2011.5.110.1.7.1.5 |
hwAncpAnSessionStatisticTableIt is the Huawei proprietary ANCP session statistics table. It is
queried to obtain the ANCP session statistics. It supports the query
sand clear functions.
The index of this table is ancpAnSessionConfigSessionId. SEQUENCE OF HwAncpAnSessionStatisticEntry .1.3.6.1.4.1.2011.5.110.1.8 |
hwAncpAnSessionStatisticEntryIt is the Huawei proprietary ANCP session statistics table. It is
queried to obtain the ANCP session statistics. It supports the query
sand clear functions.
The index of this entry is ancpAnSessionConfigSessionId. HwAncpAnSessionStatisticEntry .1.3.6.1.4.1.2011.5.110.1.8.1 |
hwAncpAnSessionClearStatisticsThis object allowed clearing the message statistics of the session.
Options:
1. clear(1) -clear the message statistics of the sessionrw Enumeration .1.3.6.1.4.1.2011.5.110.1.8.1.1 |
hwAncpAnSessionStatSentSynMessagesThe number of messages that in this session have been sent SYN Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.2 |
hwAncpAnSessionStatSentSynAckMessagesThe number of messages that in this session have been sent SYNACK Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.3 |
hwAncpAnSessionStatSentAckMessagesThe number of messages that in this session have been sent ACK Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.4 |
hwAncpAnSessionStatSentRstAckMessagesThe number of messages that in this session have been sent RSTACK Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.5 |
hwAncpAnSessionStatSentTopoUpMessagesThe number of messages that in this session have been sent TOPO up Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.6 |
hwAncpAnSessionStatSentTopoDownMessagesThe number of messages that in this session have been sent TOPO down Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.7 |
hwAncpAnSessionStatSentLineCfgMessagesThe number of messages that in this session have been sent line config Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.8 |
hwAncpAnSessionStatSentOamMessagesThe number of messages that in this session have been sent OAM Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.9 |
hwAncpAnSessionStatSentCacMessagesThe number of messages that in this session have been sent CAC Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.10 |
hwAncpAnSessionStatSentCacThresholdMessagesThe number of messages that in this session have been sent CAC threshold Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.11 |
hwAncpAnSessionStatSentCacApplyBwMessagesThe number of messages that in this session have been sent CAC bandwidth apply Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.12 |
hwAncpAnSessionStatSentFailedMessagesThe number of messages that in this session have been sent failed Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.13 |
hwAncpAnSessionStatRcvdSynMessagesThe number of messages that in this session have been received SYN Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.14 |
hwAncpAnSessionStatRcvdSynAckMessagesThe number of messages that in this session have been received SYNACK Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.15 |
hwAncpAnSessionStatRcvdAckMessagesThe number of messages that in this session have been received ACK Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.16 |
hwAncpAnSessionStatRcvdRstAckMessagesThe number of messages that in this session have been received RSTACK Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.17 |
hwAncpAnSessionStatRcvdLineCfgMessagesThe number of messages that in this session have been received Line Config Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.18 |
hwAncpAnSessionStatRcvdOamMessagesThe number of messages that in this session have been received OAM Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.19 |
hwAncpAnSessionStatRcvdCacMessagesThe number of messages that in this session have been received CAC Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.20 |
hwAncpAnSessionStatRcvdCacThresholdMessagesThe number of messages that in this session have been received CAC threshold Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.21 |
hwAncpAnSessionStatRcvdCacBdApplyMessagesThe number of messages that in this session have been received CAC bandwidth apply Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.22 |
hwAncpAnSessionStatRcvdUnknownMessagesThe number of messages that in this session have been received failed Message.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.6.1.4.1.2011.5.110.1.8.1.23 |
hwAncpAnTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.110.1.9 |
hwAncpAnTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.110.1.9.0 |
hwAncpAnSessionUpTrapParaNumIndicates the parameters number of the hwAncpAnSessionUpTrap.ro Unsigned32 .1.3.6.1.4.1.2011.5.110.1.9.0.1 |
hwAncpAnSessionDownTrapParaNumIndicates the parameters number of the hwAncpAnSessionDownTrap.ro Unsigned32 .1.3.6.1.4.1.2011.5.110.1.9.0.2 |
hwAncpAnCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.110.1.9.1 |
hwAncpAnCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.110.1.9.1.0 |
hwAncpAnSessionDownTrapThis notification is generated whenever an ANCP session
goes down. A session can go down for several reasons:
1) The ANCP session can be deleted by a manager from the
ancpAnSessionConfigTable, and hence it will also be
removed from the ancpAnCurrentSessionTable.
2) The session can go operational down due to some
malfunction in the network, the AN, or the NAS. In
this case, the ANCP session will be still in the
ancpAnSessionConfigTable and ancpAnCurrentSessionTable,
but the ancpAnCurrentSessionState moves from the estab
state to another state.
This notification is only generated when
ancpAnSessionConfigNotifyDnEnable of this session is set
to true. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.110.1.9.1.0.1 |
hwAncpAnSessionUpTrapThis notification is generated when an ANCP session enters
the estab state as given by ancpAnCurrentSessionState.
Since ancpAnCurrentSessionAnInstance identifies the ANCP
session uniquely the other attributes can be derived from
this attribute.
This notification is only generated when
ancpAnSessionConfigNotifyUpEnable of this session is set
to true. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.110.1.9.1.0.2 |
hwAncpAnSessionDiagnosticTrapIf the setup of the connection fails, the DSLAM
and the BRAS must generate an appropriate fault/alarm
message to the network management system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.110.1.9.1.0.3 |