HUAWEI-8021x-EXT-MIB
AI MIB Summary
The HUAWEI-8021x-EXT-MIB module enables monitoring and management of IEEE 802.1x authentication states, session counts, and port access control parameters on Huawei network devices. It specifically tracks identity verification metrics and link-layer access control events for wired and wireless user sessions.
The MIB module defines the IEEE802.1x protocol MIB objects. IEEE802.1x protocol is mainly used to control the link layer access and identity verification for wireless users.
Main OID:
hwPae8021xExt.1.3.6.1.4.1.2011.5.22
82
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
82 total| Object Name |
|---|
hwPae8021xExtThe MIB module defines the IEEE802.1x protocol MIB objects.
IEEE802.1x protocol is mainly used to control the link layer access
and identity verification for wireless users. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.22 |
hwpaeExtMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.22.1 |
hwdot1xPaeSystem OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.22.1.1 |
hwdot1xAuthQuietPeriodSilence period of the system, preventing malicious attack. By
default, it is 60 seconds. DEFVAL { 60 }rw Unsigned32 .1.3.6.1.4.1.2011.5.22.1.1.1 |
hwdot1xAuthTxPeriodInterval period of sending EAP_Request/Id packet. By default,30 seconds.DEFVAL { 30 }rw Unsigned32 .1.3.6.1.4.1.2011.5.22.1.1.2 |
hwdot1xAuthSuppTimeoutInterval period of waiting for the supplicant to response to EAPoL
packet.DEFVAL { 30 }rw Unsigned32 .1.3.6.1.4.1.2011.5.22.1.1.3 |
hwdot1xAuthServerTimeoutConfigure the period of waiting for the response of Server. By
default, it is 30 seconds.DEFVAL { 30 }rw Unsigned32 .1.3.6.1.4.1.2011.5.22.1.1.4 |
hwdot1xAuthMaxReqMaximum times of authentication.DEFVAL { 2 }rw Unsigned32 .1.3.6.1.4.1.2011.5.22.1.1.5 |
hwdot1xAuthReAuthPeriodConfigure the reauthentication period. By default, it is 3600
seconds.DEFVAL { 3600 }.rw Unsigned32 .1.3.6.1.4.1.2011.5.22.1.1.6 |
hwdot1xPaeAuthenticator OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.22.1.2 |
hwdot1xAuthConfigExtTableIt is an extension of the public MIB table dot1xAuthConfigTable, with certain
leaves added for describing the configuration of the object of the port
authenticator. The index of this table is dot1xPaePortNumber. SEQUENCE OF Hwdot1xAuthConfigExtEntry .1.3.6.1.4.1.2011.5.22.1.2.1 |
hwdot1xAuthConfigExtEntryIt is an extension of the public MIB table dot1xAuthConfigTable, with certain
leaves added for describing the configuration of the object of the port
authenticator. The index of this entry is dot1xPaePortNumber. Hwdot1xAuthConfigExtEntry .1.3.6.1.4.1.2011.5.22.1.2.1.1 |
hwdot1xpaeportAuthAdminStatusIndicates he switch of port protocol, enabling or disenabling port 8021X.
Options:
1. enabled(1) -indicates port 8021X is enabled
2. disabled(2) -indicates port 8021X is disabledrw Enumeration .1.3.6.1.4.1.2011.5.22.1.2.1.1.1 |
hwdot1xpaeportControlledTypePort Access Control type, base port access control or base MAC
access control.
Options:
1. port(1) -base port access control
2. mac(2) -base MAC access controlrw Enumeration .1.3.6.1.4.1.2011.5.22.1.2.1.1.2 |
hwdot1xpaeportMaxUserNumIndicates the maximum number of online users in a port.rw Integer32 .1.3.6.1.4.1.2011.5.22.1.2.1.1.3 |
hwdot1xpaeportUserNumNowIndicates the number of online users in a port now.rw Integer32 .1.3.6.1.4.1.2011.5.22.1.2.1.1.4 |
hwdot1xpaeportClearStatisticsIndicates clear various Statistics viz.
Options:
1. clear(1) -indicates clearing various statistics vizrw Enumeration .1.3.6.1.4.1.2011.5.22.1.2.1.1.5 |
hwDot1xAuthHandshakeSwitchIndicates the status of the handshake function.
Options:
1. open(1) -indicates the handshake function is enabled
2. close(0) -indicates the handshake function is disabled
Default: close(0)rw Enumeration .1.3.6.1.4.1.2011.5.22.1.2.1.1.6 |
hwDot1xAuthHandshakeCountIndicates the permitted handshake failures.
Range: 0-10
The value 0 is meaningless in current version.
Default: 3rw Integer32 .1.3.6.1.4.1.2011.5.22.1.2.1.1.7 |
hwDot1xAuthHandshakeIntervalIndicates the handshake interval.
Unit: second
Range: 1-1800
Default: 15srw Integer32 .1.3.6.1.4.1.2011.5.22.1.2.1.1.8 |
hwDot1xAuthIfEAPEndIndicates which EAP authentication mode is adopted for port or virtual port.
In the 802.1x function, the authentication packet can be processed in two modes: EAP end and EAP relay.
Options:
1. eapEnd(1) -indicates the EAP authentication mode is eapEnd
2. eapRelay(2) -indicates the EAP authentication mode is eapRelay
Default: eapReplay(2)rw Enumeration .1.3.6.1.4.1.2011.5.22.1.2.1.1.9 |
hwDot1xMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.22.1.3 |
hwDHCPTripperStatusThe device processes the DHCP DISCOVER and DHCP REQUEST packets only after
the DHCP-trigger authentication function is enabled. Otherwise, the device
does not process the DHCP DISCOVER or DHCP REQUEST packet. After the
DHCP-trigger authentication function is enabled, the device triggers the
authentication when receiving the DHCP DISCOVER and DHCP REQUEST packets.
Indicates the status of the DHCP-trigger authentication function of the device.
Options:
1. enabled(1) -indicates the DHCP-trigger authentication function is enabled
2. disabled(2) -indicates the DHCP-trigger authentication function is disabled
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.1 |
hwDot1xTemplateConfigTableIt is used to configure the profile used to control the user authentication
through 802.1x. Profile 1 exists permanently, and it cannot be created or deleted.
Other profiles can be created or deleted. The index of this table is hwDot1xTemplateIndex.
This table supports only the profile mode. To create a profile, set hwDot1xTempRowStatus
to createAndGo(4). The index is the ID of the profile to be created. To delete a profile,
set hwDot1xTempRowStatus to destroy(6). The index is the ID of the profile to be deleted. SEQUENCE OF HwDot1xTemplateConfigEntry .1.3.6.1.4.1.2011.5.22.1.3.2 |
hwDot1xTemplateConfigEntryIt is used to configure the profile used to control the user authentication
through 802.1x. Profile 1 exists permanently, and it cannot be created or deleted.
Other profiles can be created or deleted. The index of this entry is hwDot1xTemplateIndex.
This table supports only the profile mode. To create a profile, set hwDot1xTempRowStatus
to createAndGo(4). The index is the ID of the profile to be created. To delete a profile,
set hwDot1xTempRowStatus to destroy(6). The index is the ID of the profile to be deleted. HwDot1xTemplateConfigEntry .1.3.6.1.4.1.2011.5.22.1.3.2.1 |
hwDot1xTemplateIndexIndicates the profile ID.
Range: 1-256 Integer32 .1.3.6.1.4.1.2011.5.22.1.3.2.1.1 |
hwDot1xHandshakeSwitchIndicates the status of the handshake function.
Options:
1. open(1) -indicates the handshake function is enabled
2. close(0) -indicates the handshake function is disabled
Default: close(0)ro Enumeration .1.3.6.1.4.1.2011.5.22.1.3.2.1.2 |
hwDot1xHandshakeCountIndicates the permitted handshake failures.
Range: 0-10
Default: 0rw Integer32 .1.3.6.1.4.1.2011.5.22.1.3.2.1.3 |
hwDot1xHandshakeIntervalIndicates the handshake interval.
Unit: second
Range: 1-1800
Default: 15srw Integer32 .1.3.6.1.4.1.2011.5.22.1.3.2.1.4 |
hwDot1xIfEAPEndIndicates which EAP authentication mode is adopted for the specified 802.1x profile.
In the 802.1x function, the authentication packet can be processed in two modes:
EAP end and EAP relay.
Options:
1. eapEnd(1) -indicates the EAP end authentication mode. If local user authenticates on
DSLAM directly, it does not need to communicate with the remote RADIUS server.
If the user is not local user, it must be authenticated on the remote RADIUS
server.
2. eapRelay(2) -the user must be authenticated on the remote RADIUS server
Default: eapReplay(2)rw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.2.1.5 |
hwDot1xTempIfUsedIndicates whether the profile is used. When a profile is not used,
the profile can be deleted.
Options:
1. used(1) -indicates the profile is used
2. unused(0) -indicates the profile is not used
Default: unused(0)ro Enumeration .1.3.6.1.4.1.2011.5.22.1.3.2.1.6 |
hwDot1xTempRowStatusIndicates the operation type of the table.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating a profile
3. destroy(6) -indicates deleting a profilerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.22.1.3.2.1.7 |
hwDot1xPortConfigExtTableIt is an extension table of dot1xPaePortTable and is used for describing
the authorization mode and authentication status of the port. The index
of this table is dot1xPaePortNumber (defined in dot1xPaePortTable). This
version supports authentication based on the port or service port; therefore,
dot1xPaePortNumber indicates the ID of a port or service port. When the
input value exceeds the maximum ID of the service port, dot1xPaePortNumber
is treated as ifIndex. The range of the service port IDs depends on the version.
This table supports the creation of the port table. After the port table
is created, the 802.1x authentication is bound to the port.
The create operation is as follows:
Specify the ID of the port to which the 802.1x authentication needs to be bound.
Set hwDot1xPortRowStatus to createAndGo(4), and issue the set operation.
Optionally specify hwDot1xPortMacControl. However, if the ID of the port is
the ID of the service port, hwDot1xPortMacControl cannot be specified.
hwDot1xPortMacControl cannot be issued independently, and it must be issued
together with hwDot1xPortRowStatus during the create operation. SEQUENCE OF HwDot1xPortConfigExtEntry .1.3.6.1.4.1.2011.5.22.1.3.3 |
hwDot1xPortConfigExtEntryIt is an extension table of dot1xPaePortTable and is used for describing
the authorization mode and authentication status of the port. The index
of this entry is dot1xPaePortNumber (defined in dot1xPaePortTable). This
version supports authentication based on the port or service port; therefore,
dot1xPaePortNumber indicates the ID of a port or service port. When the
input value exceeds the maximum ID of the service port, dot1xPaePortNumber
is treated as ifIndex. The range of the service port IDs depends on the version.
This table supports the creation of the port table. After the port table
is created, the 802.1x authentication is bound to the port.
The create operation is as follows:
Specify the ID of the port to which the 802.1x authentication needs to be bound.
Set hwDot1xPortRowStatus to createAndGo(4), and issue the set operation.
Optionally specify hwDot1xPortMacControl. However, if the ID of the port is
the ID of the service port, hwDot1xPortMacControl cannot be specified.
hwDot1xPortMacControl cannot be issued independently, and it must be issued
together with hwDot1xPortRowStatus during the create operation. HwDot1xPortConfigExtEntry .1.3.6.1.4.1.2011.5.22.1.3.3.1 |
hwDot1xPortControlTypeIndicates the control type of the port. The port can be controlled in the
following two ways: physical port control and service port control.
Options:
1. physicalPort(1) -physical port control
2. servicePort(2) -service port controlro Enumeration .1.3.6.1.4.1.2011.5.22.1.3.3.1.1 |
hwDot1xPortBindFlagIndicates that the 802.1x authentication is bound to the port.
Options:
1. binding(1) -indicates the 802.1x authentication is bound to the portro Enumeration .1.3.6.1.4.1.2011.5.22.1.3.3.1.2 |
hwDot1xPortAuthModeIndicates the control parameters of the controlled port. A port has three
authorization control modes: force-authorized mode, force-unauthorized mode,
and auto mode. According to different networks, different port control modes
can be selected. By default, a port is in the unauthorized state, and users
connected to the port cannot access network resources. If the authentication
passes, the port state switches to the authorized state and users can access
the network resources.
Options:
1. forceUnauthorized(1) -indicates force-authorized mode
2. auto(2) -auto mode
3. forceAuthorized(3) -indicates force-unauthorized mode
Default: auto(2)rw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.3.1.3 |
hwDot1xPortAuthStateIndicates the port authentication status.
Options:
1. auth(1) -indicates the port is authenticated
2. unAuth(2) -indicates the port is not authenticated
Default: unauth(2)ro Enumeration .1.3.6.1.4.1.2011.5.22.1.3.3.1.4 |
hwDot1xPortUserNameIndicates the user name bound to the port.ro OCTET STRING .1.3.6.1.4.1.2011.5.22.1.3.3.1.5 |
hwDot1xPortFramePoolIndicates the address pool of the port binding.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.22.1.3.3.1.6 |
hwDot1xPortRowStatusIndicates the operation type of the port table: binding the port to the 802.1x
authentication, and unbinding the port from the 802.1x authentication.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates binding a port to the 802.1x authentication
3. destroy(6) -indicates unbinding a port from the 802.1x authenticationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.22.1.3.3.1.7 |
hwDot1xPortMacControlIndicates whether to enable the MAC-based control function. This leaf can be
issued with parameters during the create operation. This function supports
port-based rather than service-port-based configuration. When hwDot1xPortMacControl
is set to enable(1), only the packets whose source MAC address is the MAC address
of the authorized user can reach the network side. This leaf does not support the
modify operation.
Options:
1. enable(1) -indicates the MAC-based control function is enabled
2. disable(2) -indicates the MAC-based control function is disabled
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.3.1.8 |
hwDot1xPortAuthStatsExtTableIt is an extension of the public MIB table dot1xAuthStatsEntry, with certain leaves
added for describing the packet statistics of the port. The index of this table is
dot1xPaePortNumber (defined in dot1xPaePortTable). The following tables list the
leaves of this table.
Only hwDot1xPortClearStatistics in this table supports the modify operation.
The modification process is as follows:
Specify the ID of the port to be modified.
Set hwDot1xPortClearStatistics to the required value. The option is clear(1).
Therefore, directly perform the set operation. SEQUENCE OF HwDot1xPortAuthStatsExtEntry .1.3.6.1.4.1.2011.5.22.1.3.4 |
hwDot1xPortAuthStatsExtEntryIt is an extension of the public MIB table dot1xAuthStatsEntry, with certain leaves
added for describing the packet statistics of the port. The index of this entry is
dot1xPaePortNumber (defined in dot1xPaePortTable). The following tables list the
leaves of this table.
Only hwDot1xPortClearStatistics in this table supports the modify operation.
The modification process is as follows:
Specify the ID of the port to be modified.
Set hwDot1xPortClearStatistics to the required value. The option is clear(1).
Therefore, directly perform the set operation. HwDot1xPortAuthStatsExtEntry .1.3.6.1.4.1.2011.5.22.1.3.4.1 |
hwDot1xAuthSuccessTimesIndicates the number of authentication successes.ro Integer32 .1.3.6.1.4.1.2011.5.22.1.3.4.1.1 |
hwDot1xAuthFailureTimesIndicates the number of authentication failures.ro Integer32 .1.3.6.1.4.1.2011.5.22.1.3.4.1.2 |
hwDot1xEapolFailurePacketsTxIndicates the number of the transmitted Eapol-Failure packets.ro Integer32 .1.3.6.1.4.1.2011.5.22.1.3.4.1.3 |
hwDot1xEapolSuccessPacketsTxIndicates the number of the transmitted Eapol-Success packets.ro Integer32 .1.3.6.1.4.1.2011.5.22.1.3.4.1.4 |
hwDot1xNoSupportPacketsRxIndicates the number of the unsupported EAPoL packets that are received.ro Integer32 .1.3.6.1.4.1.2011.5.22.1.3.4.1.5 |
hwDot1xPortClearStatisticsClears the port statistics.
Options:
1. clear(1) -indicates clearing the port statisticsrw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.4.1.6 |
hwDot1xAutoDetectIndicates the status of the auto-detect function of the device. After the 802.1x
auto-detect function is enabled, the system automatically detects the port status
and requests the user authentication.
Options:
1. enabled(1) -indicates the auto-detect function of the device is enabled
2. disabled(2) -indicates the auto-detect function of the device is disabled
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.5 |
hwDot1xIntermittentBlinkingProtectionIndicates the intermittent blinking protection function, which is used to reduce
the duration of service interruption caused by port intermittent blinking. After
the intermittent blinking protection function is enabled, the system does not force
the 802.1x user to go offline when the port is down. In this case, if the handshake
function is already enabled, the system detects the user by using the handshake
mechanism; if the handshake function is disabled, the system waits for the duration
of keepalive interval x number of handshake failures, and then forces the user to
go offline if the port is still down. After the intermittent blinking protection
function is enabled, the count of user online duration may be incorrect. Therefore,
this function is applicable to the provisioning of services with the monthly flat
rate rather than in the duration-based charging mode.
Indicates the status of the intermittent blinking protection function of the device.
Options:
1. enabled(1) -indicates the intermittent blinking protection function is enabled
2. disabled(2) -indicates the intermittent blinking protection function is disabled
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.6 |
hwDot1xGlobalMacControlStatusWhether the global mac control is enabled in the device.
Enable indicate that global mac control enable in the device;
Disabled indicate that global mac control disable in the device.
DEFVAL { 2 }
Options:
1. enabled(1) -indicates the global mac control is enabled
2. disabled(2) -indicates the global mac control is disabledrw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.7 |
hwDot1xMacPortInfoTableThis table describes the port information of 802.1x,
The index of this table is mac address. SEQUENCE OF HwDot1xMacPortInfoEntry .1.3.6.1.4.1.2011.5.22.1.3.8 |
hwDot1xMacPortInfoEntryThis table describes the port information of 802.1x,
The index of this entry is mac address. HwDot1xMacPortInfoEntry .1.3.6.1.4.1.2011.5.22.1.3.8.1 |
hwDot1xMacPortInfoMacAddressMac address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.22.1.3.8.1.1 |
hwDot1xMacPortInfoAuthStateAuthentication state.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.8.1.2 |
hwDot1xMacPortInfoAuthTypeAuthentication Type.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.8.1.3 |
hwDot1xMacPortStatTableThis table describes the port statistics of 802.1x,
The index of this table is mac address. SEQUENCE OF HwDot1xMacPortStatEntry .1.3.6.1.4.1.2011.5.22.1.3.9 |
hwDot1xMacPortStatEntryThis table describes the port statistics of 802.1x,
The index of this entry is mac address. HwDot1xMacPortStatEntry .1.3.6.1.4.1.2011.5.22.1.3.9.1 |
hwDot1xMacPortStatAuthSuccessTimesAuthentication success timesro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.1 |
hwDot1xMacPortStatAuthFailureTimesAuthentication Failure timesro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.2 |
hwDot1xMacPortStatEapolFailurePacketsTxThe numbers of the Eapol-Failure Packets which has been send by the portro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.3 |
hwDot1xMacPortStatEapolSuccessPacketsTxThe numbers of the Eapol-Success Packets which has been send by the portro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.4 |
hwDot1xMacPortStatNoSupportPacketsRxThe numbers of the Eapol packets which are not supported have been
received in this portro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.5 |
hwDot1xMacPortStatClearStatisticsClear the information of the packets statistics in this port
Options:
1. clear(1) -indicates clearing the information of the packets statistics in this portrw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.9.1.6 |
hwDot1xMacPortStatAuthEapolFramesRxThe number of valid EAPOL frames of any type
that has been received by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.7 |
hwDot1xMacPortStatAuthEapolFramesTxThe number of EAPOL frames of any type
that has been transmitted by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.8 |
hwDot1xMacPortStatAuthEapolStartFramesRxThe number of EAPOL Start frames that have
been received by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.9 |
hwDot1xMacPortStatAuthEapolLogoffFramesRxThe number of EAPOL Logoff frames that have
been received by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.10 |
hwDot1xMacPortStatAuthEapolRespIdFramesRxThe number of EAP Resp/Id frames that have
been received by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.11 |
hwDot1xMacPortStatAuthEapolRespFramesRxThe number of valid EAP Response frames
(other than Resp/Id frames) that have been
received by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.12 |
hwDot1xMacPortStatAuthEapolReqIdFramesTxThe number of EAP Req/Id frames that have been
transmitted by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.13 |
hwDot1xMacPortStatAuthEapolReqFramesTxThe number of EAP Request frames
(other than Rq/Id frames) that have been
transmitted by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.14 |
hwDot1xMacPortStatAuthInvalidEapolFramesRxThe number of EAPOL frames that have been
received by this Authenticator in which the
frame type is not recognized.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.15 |
hwDot1xMacPortStatAuthEapLengthErrorFramesRxThe number of EAPOL frames that have been received
by this Authenticator in which the Packet Body
Length field is invalid.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.16 |
hwDot1xMacPortStatAuthLastEapolFrameVersionThe protocol version number carried in the
most recently received EAPOL frame.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.17 |
hwDot1xMacPortStatAuthEapolKeyFramesRxThe number of EAPOL key frames that have been received
by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.18 |
hwDot1xMacPortStatAuthEapolKeyFramesTxThe number of EAPOL key frames that have been sent
by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.19 |
hwDot1xMacPortStatAuthEapolPeapFramesRxThe number of EAPOL peap frames that have been received
by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.20 |
hwDot1xMacPortStatAuthEapolPeapFramesTxThe number of EAPOL peap frames that have been sent
by this Authenticator.ro Unsigned32 .1.3.6.1.4.1.2011.5.22.1.3.9.1.21 |
hwDot1xMacConflictDetectStatusIndicates the status of the mac-conflict-detect function of the device. After the
802.1x mac-conflict-detect function is enabled, the system detects the mac conflicts.
Options:
1. enabled(1) -indicates the mac-conflict-detect of the device is enabled
2. disabled(2) -indicates the mac-conflict-detect of the device is disabled
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.22.1.3.10 |