H3C-TRAP-MIB
AI MIB Summary
The H3C-TRAP-MIB defines the structure for SNMP trap messages generated by H3C routers and switches to asynchronously notify management stations of critical system events, interface state changes, and hardware faults. It enables real-time monitoring of device health and operational anomalies by mapping specific error conditions and status transitions to standardized trap OIDs.
This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
Main OID:
h3cTrap.1.3.6.1.4.1.2011.10.2.38
73
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
73 total| Object Name |
|---|
h3cTrapThis MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.38 |
h3cTableGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1 |
h3cMacTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.1 |
h3cMacTabTrapEnableIndicates whether h3cMacTabFullTrap and h3cMacTabAlmostFullTrap traps should be generated when the MAC table is filled.rw Enumeration .1.3.6.1.4.1.2011.10.2.38.1.1.1 |
h3cMacTabTrapIntervalDefinition of the minimum interval between two traps which occur when the MAC table is full or two traps which occur when the MAC table is almost full.rw Integer32 .1.3.6.1.4.1.2011.10.2.38.1.1.2 |
h3cMacTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.1.3 |
h3cMacTabLenThe length of the MAC table.ro Integer32 .1.3.6.1.4.1.2011.10.2.38.1.1.3.1 |
h3cMacTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.1.4 |
h3cMacTabFullTrapSend this trap when the MAC table is filled. The interval between two traps generated should be longer than h3cMacTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.1.4.1 |
h3cMacTabAlmostFullTrapSend this trap when the MAC table is almost full. The interval between two traps generated should be longer than h3cMacTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.1.4.2 |
h3cArpTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.2 |
h3cArpTabTrapEnableIndicates whether h3cArpTabFullTrap traps should be generated when the ARP table is filled.rw Enumeration .1.3.6.1.4.1.2011.10.2.38.1.2.1 |
h3cArpTabTrapIntervalDefinition of the minimum interval between two traps which occur when the ARP table is filled.rw Integer32 .1.3.6.1.4.1.2011.10.2.38.1.2.2 |
h3cArpTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.2.3 |
h3cArpTabLenThe length of the ARP table.ro Integer32 .1.3.6.1.4.1.2011.10.2.38.1.2.3.1 |
h3cArpTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.2.4 |
h3cArpTabFullTrapSend this trap when the ARP table is filled. The interval between two traps generated should be longer than h3cArpTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.2.4.1 |
h3cArpPortDynamicEntryFullTrapSend this trap when the dynamic ARP number of the port exceeds the limitation. The object h3cArpTabLen describes the limitation of the max dynamic ARP number of this port. The interval between two traps should be longer than h3cArpTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.2.4.2 |
h3cRtTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.3 |
h3cDetailRtTrapTableThis table contains objects to decide what kind of trap should be sent. SEQUENCE OF H3cDetailRtTrapEntry .1.3.6.1.4.1.2011.10.2.38.1.3.1 |
h3cDetailRtTrapEntryEntry items H3cDetailRtTrapEntry .1.3.6.1.4.1.2011.10.2.38.1.3.1.1 |
h3cDetailRtProTypeThe index value which uniquely identifies an entry in the h3cDetailRtTrapTable.ro Enumeration .1.3.6.1.4.1.2011.10.2.38.1.3.1.1.1 |
h3cDetailRtEnableIndicates whether h3cDetailRtTabFullTrap traps should be generated when a specific routing table is filled.rw Enumeration .1.3.6.1.4.1.2011.10.2.38.1.3.1.1.2 |
h3cRtTabTrapEnableIndicates whether h3cRtTabFullTrap traps should be generated when the routing table is filled.rw Enumeration .1.3.6.1.4.1.2011.10.2.38.1.3.2 |
h3cRtTabTrapIntervalDefinition of the minimum interval between two traps which occur when the routing table is filled.rw Integer32 .1.3.6.1.4.1.2011.10.2.38.1.3.3 |
h3cRtTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.3.4 |
h3cRtTabLenThe length of the routing table. The detail routing tables also use the same object.ro Integer32 .1.3.6.1.4.1.2011.10.2.38.1.3.4.1 |
h3cDefaultRtNextHopTypeThe IP address type of the next hop of the default route. The value must be ipv4 or ipv6ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.38.1.3.4.2 |
h3cDefaultRtNextHopThe IP address of the next hop of the default route.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.38.1.3.4.3 |
h3cDefaultRtOutIfThe index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.10.2.38.1.3.4.4 |
h3cRtTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.3.5 |
h3cRtTabFullTrapSend this trap when the routing table is filled. The interval between two traps generated should be longer than h3cRtTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.3.5.1 |
h3cDetailRtTabFullTrapSend this trap when the detail routing table is filled. The interval between two traps generated should be longer than h3cRtTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.3.5.2 |
h3cDefaultRtDelTrapSend this trap when the default route is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.3.5.3 |
h3cDefaultRtDelTrapEnableIndicates whether h3cDefaultRtDelTrap traps should be generated when the default route is deleted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.38.1.3.6 |
h3cMulticastTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.4 |
h3cMulticastTabTrapEnableIndicates whether h3cMulticastTabFullTrap traps should be generated when the multicast table is filled.rw Enumeration .1.3.6.1.4.1.2011.10.2.38.1.4.1 |
h3cMulticastTabTrapIntervalDefinition of the minimum interval between two traps which occur when the multicast table is filled.rw Integer32 .1.3.6.1.4.1.2011.10.2.38.1.4.2 |
h3cMulticastTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.4.3 |
h3cMulticastTabTypeDefining the type of the multicast table, layer2 or layer3.ro Enumeration .1.3.6.1.4.1.2011.10.2.38.1.4.3.1 |
h3cMulticastTabLenThe length of the multicast table.ro Integer32 .1.3.6.1.4.1.2011.10.2.38.1.4.3.2 |
h3cMulticastTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.4.4 |
h3cMulticastTabFullTrapSend this trap when the multicast table is filled. The interval between two traps generated should be longer than h3cMulticastTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.4.4.1 |
h3cNdTabStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.5 |
h3cNdTabTrapEnableIndicates whether h3cNdTabFullTrap traps should be generated when the ND table is filled.rw Enumeration .1.3.6.1.4.1.2011.10.2.38.1.5.1 |
h3cNdTabTrapIntervalDefinition of the minimum interval between two traps which occur when the ND table is filled.rw Integer32 .1.3.6.1.4.1.2011.10.2.38.1.5.2 |
h3cNdTabTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.5.3 |
h3cNdTabLenThe length of the ND table.ro Integer32 .1.3.6.1.4.1.2011.10.2.38.1.5.3.1 |
h3cNdTabTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.5.4 |
h3cNdTabFullTrapSend this trap when the ND table is filled. The interval between two traps generated should be longer than h3cNdTabTrapInterval. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.5.4.1 |
h3cPeriodicalTrapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.6 |
h3cPeriodicalTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.6.1 |
h3cPeriodicalTrapIntervalDefinition of the periodical interval. If no trap occurs during the certain interval, an h3cPeriodicalTrap will be generated. If the interval is set to 0, no h3cPeriodicalTrap will be generated.rw Integer32 (0|10..3600) UNITS "seconds" .1.3.6.1.4.1.2011.10.2.38.1.6.1.1 |
h3cPeriodicalTrapSwitchDefinition of the periodical switch. If the value is off,the h3cPeriodicalTrap will not be generated. the h3cPeriodicalTrapInterval will be set to 0.rw Enumeration .1.3.6.1.4.1.2011.10.2.38.1.6.1.2 |
h3cPeriodicalTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.6.2 |
h3cPeriodicalNotification OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.6.3 |
h3cPeriodicalNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.6.3.0 |
h3cPeriodicalTrapIf no trap occurs during the interval spicified by h3cPeriodicalTrapInterval, an h3cPeriodicalTrap will be generated. If the interval is set to 0, no h3cPeriodicalTrap will be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.38.1.6.3.0.1 |
h3cTrapDesInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.7 |
h3cTrapDesInfoTableA table of trap destination host address and port . SEQUENCE OF H3cTrapDesInfoEntry .1.3.6.1.4.1.2011.10.2.38.1.7.1 |
h3cTrapDesInfoEntryThe entry of trap destination host address and port. H3cTrapDesInfoEntry .1.3.6.1.4.1.2011.10.2.38.1.7.1.1 |
h3cTrapDesInfoIndexThe index of this table. Integer32 .1.3.6.1.4.1.2011.10.2.38.1.7.1.1.1 |
h3cTrapDesIPAddressThe host IP address of the trap destination.rw IpAddress .1.3.6.1.4.1.2011.10.2.38.1.7.1.1.2 |
h3cTrapDesPortThe port of the trap destination.rw Integer32 .1.3.6.1.4.1.2011.10.2.38.1.7.1.1.3 |
h3cTrapDesRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.38.1.7.1.1.4 |
h3cTrapDesAddrTAddressThis object contains a transport address.rw TAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.38.1.7.1.1.5 |
h3cTrapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.38.1.8 |
h3cTrapConfigTableA table of trap configuration. SEQUENCE OF H3cTrapConfigEntry .1.3.6.1.4.1.2011.10.2.38.1.8.1 |
h3cTrapConfigEntryThe entry of trap configuration. H3cTrapConfigEntry .1.3.6.1.4.1.2011.10.2.38.1.8.1.1 |
h3cTrapConfigIndexThe index of this table. Integer32 .1.3.6.1.4.1.2011.10.2.38.1.8.1.1.1 |
h3cTrapConfigNameThe name of the appointed traps.ro SnmpAdminString .1.3.6.1.4.1.2011.10.2.38.1.8.1.1.2 |
h3cTrapConfigDescrThe description of the appointed traps.rw SnmpAdminString .1.3.6.1.4.1.2011.10.2.38.1.8.1.1.3 |
h3cTrapConfigSwitchIndicates whether the appointed traps should be generated.rw Enumeration .1.3.6.1.4.1.2011.10.2.38.1.8.1.1.4 |