H3C-SAN-AGG-MIB
The H3C-SAN-AGG-MIB manages Fiber Channel SAN aggregation groups on H3C storage switches, enabling the creation, deletion, and state monitoring of port membership within these logical aggregation interfaces.
Imported Objects
Objects
18 total| Object Name |
|---|
h3cSanAggThis MIB module is for configuring and monitoring SAN (Storage Area Networks) aggregation group related MIB objects. This MIB can be used to add or delete a SAN aggregation group, and make one or more FC (Fiber Channel) ports join or leave the group, as well as show their states. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.127.2 |
h3cSanAggMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.127.2.1 |
h3cSanAggMaxMemberNumberThis value specifies the maximum member number that a SAN aggregation group supports, and this restriction depends on product customization.ro Integer32 .1.3.6.1.4.1.2011.10.2.127.2.1.1 |
h3cSanAggGroupTableA table of SAN aggregation objects to be used in configuring and monitoring a SAN aggregation group and its members. SEQUENCE OF H3cSanAggGroupEntry .1.3.6.1.4.1.2011.10.2.127.2.2 |
h3cSanAggGroupEntryA group of SAN aggregation objects to be used in configuring and monitoring a SAN aggregation group and its members. H3cSanAggGroupEntry .1.3.6.1.4.1.2011.10.2.127.2.2.1 |
h3cSanAggGroupNumberThe serial number of the current SAN aggregation group.ro Integer32 .1.3.6.1.4.1.2011.10.2.127.2.2.1.1 |
h3cSanAggGroupIndexThe ifIndex of the current SAN aggregation group.ro Integer32 .1.3.6.1.4.1.2011.10.2.127.2.2.1.2 |
h3cSanAggMemberListList of member's ifIndex in the current SAN aggregation group. If there is no member in the SAN aggregation group, the list length should be zero. Otherwise each member's ifIndex value occupies 4 octets. The greatest length of this list depends on the maximum number of members a SAN aggregation group supports, which can be customized and therefore is not a fixed value. When getting the group members' ifIndexes, the result was sorted in ascending order of ifIndex values. However, when setting the group members' ifIndexes, the sequence of ifIndex values is not required.rw H3cMemberList .1.3.6.1.4.1.2011.10.2.127.2.2.1.3 |
h3cSanAggMemberStateListList of member's state in current SAN aggregation group, where the state value is sorted in ascending order of member's ifIndex, which is consistent with the 'get' result of 'h3cSanAggMemberList'. The explanation of this value's length is as same as the 'h3cSanAggMemberList'. Each member's state value occupies 4 octets. The value specifications are listed as follows: 1: This member hasn't passed the link negotiation. 2: This member has passed the link negotiation but has not been selected. 3: This member has been selected.ro H3cMemberList .1.3.6.1.4.1.2011.10.2.127.2.2.1.4 |
h3cSanAggGroupRowStatusRowStatus. Now only three states are supported: createAndGo, active, and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.127.2.2.1.5 |
h3cSanAggObjForNotification OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.127.2.3 |
h3cSanAggGroupPreviousSpeedThe previous speed of the SAN aggregation group.ro Integer32 UNITS "gigabit bps" .1.3.6.1.4.1.2011.10.2.127.2.3.1 |
h3cSanAggGroupCurrentSpeedThe current speed of the SAN aggregation group.ro Integer32 UNITS "gigabit bps" .1.3.6.1.4.1.2011.10.2.127.2.3.2 |
h3cSanAggNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.127.2.4 |
h3cSanAggNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.127.2.4.0 |
h3cSanAggGroupSpeedChangeThis event will be triggered whenever a SAN aggregation group changes its speed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.127.2.4.0.1 |
h3cSanAggMemberInactiveThis event will be triggered whenever any member in a SAN aggregation group is made inactive. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.127.2.4.0.2 |
h3cSanAggMemberActiveThis event will be triggered whenever any member in a SAN aggregation group is made active. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.127.2.4.0.3 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.