H3C-FLASH-MAN-MIB
AI MIB Summary
The H3C-FLASH-MAN-MIB enables remote monitoring and control of H3C device flash storage subsystems, specifically tracking card status, available capacity, and execution states for read, write, and erase operations.
This MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB.
Main OID:
h3cFlash.1.3.6.1.4.1.2011.10.2.5
84
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
84 total| Object Name |
|---|
h3cFlashThis MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.5 |
h3cFlashManMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.1 |
h3cFlashDevice OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.1.1 |
h3cFlhSupportNumSpecifies the total number of flash which the system supported. The MIB should not be loaded if there is no flash in the system and so the value here will be a minimum of 1.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.1 |
h3cFlashTableThis table gives the properties of all the flashes on the system. SEQUENCE OF H3cFlashEntry .1.3.6.1.4.1.2011.10.2.5.1.1.2 |
h3cFlashEntryThe entry of h3cFlashTable. H3cFlashEntry .1.3.6.1.4.1.2011.10.2.5.1.1.2.1 |
h3cFlhIndexThe index of h3cFlashTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + random index + + ( bit 16..31 ) ( bit 0..15 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), it has a minimum value of 1, and maximum value of the same as the value of h3cFlhSupportNum. From bit16 to bit31 (two bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.1 |
h3cFlhSizeSpecifies the total size of the flash device indexed by h3cFlhIndex. The value should be zero if the flash is removed for a removable device.ro Integer32 UNITS "bytes" .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.2 |
h3cFlhPosThe position of the flash device in system. This object is an index of entPhysicalTable in ENTITY-MIB. If the value of this object is 0, the main processor is indicated.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.3 |
h3cFlhNameThe flash name within the system.ro DisplayString .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.4 |
h3cFlhChipNumThe chip numbers in the flash.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.5 |
h3cFlhDescrDescription of the purpose of the flash in the system.ro DisplayString .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.6 |
h3cFlhInitTimeThe initialization time for the flash component or partition, recorded using the system time. This will be the boot time for a fixed device. For a removable component or a partition, it will be the initialization time.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.8 |
h3cFlhRemovableThe value indicates whether the flash indexed can be removed or not. The true(1) value indicates the flash device CAN be removed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.9 |
h3cFlhPartitionBoolThe value indicates whether the flash indexed can be partitioned or not. The true(1) value indicates the flash CAN be partitioned.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.11 |
h3cFlhMinPartitionSizeMinimum partition size supported. If h3cFlhDevicePartitionBool is false, the value of this object is the same as h3cFlhSize.ro Integer32 UNITS "bytes" .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.12 |
h3cFlhMaxPartitionsThe maximum count of partitions which the system supports for this flash. If h3cFlhPartitionBool is false, the object value is 1.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.13 |
h3cFlhPartitionNumThe actual number of partitions supported by the system for this flash. If h3cFlhPartitionBool is false, this value is 1.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.14 |
h3cFlhKbyteSizeSpecifies the total size of the flash device indexed by h3cFlhIndex. The value should be zero if the flash is removed for a removable device.ro Integer32 UNITS "kbytes" .1.3.6.1.4.1.2011.10.2.5.1.1.2.1.15 |
h3cFlashChips OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.1.1.3 |
h3cFlhChipTableTable of properties for all flash chips. Used mainly for diagnostics. SEQUENCE OF H3cFlhChipEntry .1.3.6.1.4.1.2011.10.2.5.1.1.3.1 |
h3cFlhChipEntryThe entry of h3cFlhChipTable H3cFlhChipEntry .1.3.6.1.4.1.2011.10.2.5.1.1.3.1.1 |
h3cFlhChipSerialNoIndex of h3cFlhChipTable. Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.3.1.1.1 |
h3cFlhChipIDThe manufacturer code (the upper byte) and device code (the lower byte) for a chip. Unknown chip code is presented as 00:00.ro DisplayString .1.3.6.1.4.1.2011.10.2.5.1.1.3.1.1.2 |
h3cFlhChipDescrThe description of the flash chip.ro DisplayString .1.3.6.1.4.1.2011.10.2.5.1.1.3.1.1.3 |
h3cFlhChipWriteTimesLimitThe limit for the number of write times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.3.1.1.4 |
h3cFlhChipWriteTimesA count of write times (retries) for the flash chip since initialization. A count of 25 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after a write operation, and report any errors accordingly.ro Counter32 .1.3.6.1.4.1.2011.10.2.5.1.1.3.1.1.5 |
h3cFlhChipEraseTimesLimitThe limit for the number of erase times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.3.1.1.6 |
h3cFlhChipEraseTimesA count of erase times (retries) for the flash chip since initialization. A count of 2000 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after an erase operation, and report any errors accordingly.ro Counter32 .1.3.6.1.4.1.2011.10.2.5.1.1.3.1.1.7 |
h3cFlashPartitions OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.1.1.4 |
h3cFlhPartitionTableProperties for the flash partitions. Minimum of one entry in this table. SEQUENCE OF H3cFlhPartitionEntry .1.3.6.1.4.1.2011.10.2.5.1.1.4.1 |
h3cFlhPartitionEntryAn entry of the h3cFlhPartitionTable.Indexed by flash number and partition number. H3cFlhPartitionEntry .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1 |
h3cFlhPartIndexAn index which specifies a sequenced partition in the system. Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.1 |
h3cFlhPartFirstChipThe first chip's sequence number in the partition, by which a chip can be indexed in chip table.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.2 |
h3cFlhPartLastChipThe last chip's sequence number in the partition, by which a chip can be indexed in chip table.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.3 |
h3cFlhPartSpaceThe total space of the flash partition. The following should be satisfied: h3cFlhPartSpace = n*h3cFlhMinPartitionSizero Integer32 UNITS "bytes" .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.4 |
h3cFlhPartSpaceFreeThe flash partition's free space.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.5 |
h3cFlhPartFileNumThe number of all the files in the flash partition.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.6 |
h3cFlhPartChecksumMethodThe Checksum method which the file system uses.ro Enumeration .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.7 |
h3cFlhPartStatusThe flash partition status.ro H3cFlashPartitionStatus .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.8 |
h3cFlhPartUpgradeModeThe upgrade mode of the Flash partitionro H3cFlashPartitionUpgradeMode .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.9 |
h3cFlhPartNameThe name of the flash partition given by the system.ro DisplayString .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.10 |
h3cFlhPartRequireEraseShows whether a write operation is conditional on partition erase.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.11 |
h3cFlhPartFileNameLenThe maximum length of file name supported in the system.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.4.1.1.12 |
h3cFlhFiles OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.1.1.4.2 |
h3cFlhFileTableTable of file information. SEQUENCE OF H3cFlhFileEntry .1.3.6.1.4.1.2011.10.2.5.1.1.4.2.1 |
h3cFlhFileEntryAn entry representing a file. Indexed using flash number, partition number, and file number. H3cFlhFileEntry .1.3.6.1.4.1.2011.10.2.5.1.1.4.2.1.1 |
h3cFlhFileIndexIndex of the table, whose range is from 1 to 2147483647 Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.4.2.1.1.1 |
h3cFlhFileNameA valid file name supported by the file system.ro DisplayString .1.3.6.1.4.1.2011.10.2.5.1.1.4.2.1.1.2 |
h3cFlhFileSizeThe file size in bytes excluding the file header of file system. The value should be greater than zero.ro Integer32 .1.3.6.1.4.1.2011.10.2.5.1.1.4.2.1.1.3 |
h3cFlhFileStatusThe status should be as follows: deleted(1): The file is in recycle bin. invalidChecksum(2): The checksum of file is invalid; valid(3): A valid file.ro Enumeration .1.3.6.1.4.1.2011.10.2.5.1.1.4.2.1.1.4 |
h3cFlhFileChecksumThe file checksum in the header of file.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.5.1.1.4.2.1.1.5 |
h3cFlashOperate OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.1.2 |
h3cFlhOpTableTable used to operate flash. SEQUENCE OF H3cFlhOpEntry .1.3.6.1.4.1.2011.10.2.5.1.2.1 |
h3cFlhOpEntryNote an operation can not be stopped until it is finished. If notification is configured, NMS will receive a notification at the end of the operation. Entries in the table will be removed automatically in 5 minutes. It can also be deleted by NMS directly. H3cFlhOpEntry .1.3.6.1.4.1.2011.10.2.5.1.2.1.1 |
h3cFlhOperIndexSpecifies the index of an entry. It is a random value when creating an entry. Integer32 .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.1 |
h3cFlhOperTypeSpecifies the operation to be executed. net2FlashWithErase Copy a file to flash; erase flash beforehand. net2FlashWithoutErase Copy a file to flash; do not erase flash beforehand. flash2Net Copy a file from flash. delete Delete a file from flash, the file name is specified by h3cFlhOperSourceFile; rename Change a file's name.rw Enumeration .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.2 |
h3cFlhOperProtocolSpecifies the protocol used to transfer file. The default protocol is ftp. when 'clusterftp' or 'clustertftp' is selected, the h3cFlhOperServerAddress needn't be set, the server address can be acquired automatically, the value of h3cFlhOperServerAddress is uncertain during operation. Both member switch and commander switch can use them if they support HGMP v2.rw Enumeration .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.3 |
h3cFlhOperServerAddressThe address of remote host acting as server for operation. The default value is 255.255.255.255 This object is replaced by h3cFlhOperSrvAddrRev for it only support IPv4.rwdeprecated IpAddress .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.4 |
h3cFlhOperServerUserWhen using ftp to transfer files, the user name must be specified through this node.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.5 |
h3cFlhOperPasswordRemote user password for copying via ftp protocol. Optionally, This object may be ignored for protocols other than ftp.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.6 |
h3cFlhOperSourceFileSpecifies the source file name to be transferred. It may be located on flash or remote server. It may include the file path if it is applicable. It must be specified.rw DisplayString .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.7 |
h3cFlhOperDestinationFileSpecifies the destination file name. It may be located on flash or remote server. It may include the file path if it is applicable. If it is not specified, the destination file name is the same as source file name for application.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.8 |
h3cFlhOperStatusThe status of operation.ro H3cFlashOperationStatus .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.9 |
h3cFlhOperEndNotificationIf the value of it is specified 'true', a notification will be generated at the end of the operation. Else no notification will be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.10 |
h3cFlhOperProgressThe progress described as the time taken for the operation.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.11 |
h3cFlhOperRowStatusThe row status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.12 |
h3cFlhOperServerPortThe port of remote host acting as server for operation. If the value of this object is not specified, the server port is the known protocol port.rw Integer32 .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.13 |
h3cFlhOperFailReasonThe failure reasons of operation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.14 |
h3cFlhOperSrvAddrTypeThe type of IP address for h3cFlhOperSrvAddrRev.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.15 |
h3cFlhOperSrvAddrRevThe address of remote host acting as server for operation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.16 |
h3cFlhOperSrvVPNNameThe VPN instance of this operation uses.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.5.1.2.1.1.17 |
h3cFlashNotification OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.1.3 |
h3cFlhOperNotificationA h3cFlhOperNotification is sent at the completion of a flash copy operation if h3cFlhOperEndNotification is true. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.5.1.3.1 |
h3cFlashMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.2 |
h3cFlhMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.2.1 |
h3cFlhMIBComplianceThe statement of compliance for those implementing this MIB. Unknown .1.3.6.1.4.1.2011.10.2.5.2.1.1 |
h3cFlashMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.5.2.2 |
h3cFlhGroupA collection of objects on Flash level information. Unknown .1.3.6.1.4.1.2011.10.2.5.2.2.1 |
h3cFlhChipGroupA collection of objects on chip level information. Unknown .1.3.6.1.4.1.2011.10.2.5.2.2.3 |
h3cFlhPartitionGroupA collection of objects providing on partition level information. Unknown .1.3.6.1.4.1.2011.10.2.5.2.2.4 |
h3cFlhFileGroupA collection of objects on file level information. Unknown .1.3.6.1.4.1.2011.10.2.5.2.2.5 |
h3cFlhOperationGroupA collection of objects of flash operations. Unknown .1.3.6.1.4.1.2011.10.2.5.2.2.6 |
h3cFlhNotificationGroupThe collection of notifications in the module Unknown .1.3.6.1.4.1.2011.10.2.5.2.2.7 |