H3C-EPON-MIB
AI MIB Summary
The H3C-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on H3C equipment compliant with IEEE 802.3ah, specifically tracking Optical Line Terminal (OLT) and Optical Network Unit (ONU) session states, registration status, and physical layer parameters defined in clauses 60, 64, and 65.
The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
Main OID:
h3cEponMibObjects.1.3.6.1.4.1.2011.10.2.42.1
424
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
424 total| Object Name |
|---|
h3cEponMibObjectsThe objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.42.1 |
h3cEponSysMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.1 |
h3cEponAutoAuthorizeThis value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.1.1 |
h3cEponMonitorCycleThe cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.2 |
h3cEponMsgTimeOutTimeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.3 |
h3cEponMsgLoseNumThe times of messages sending timeouts, after which OLT will reset (applying to every OLT).rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.4 |
h3cEponSysHasEPONBoardtrue(1) - At least an EPON board exists. false(2) - No EPON board exists.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.1.5 |
h3cEponMonitorCycleEnableStop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.1.6 |
h3cEponOltSoftwareErrAlmEnableSoftware error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.1.7 |
h3cEponPortLoopBackAlmEnableLoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.1.8 |
h3cEponMonitorCycleMinValThe lower limit of cycle which be confined to the h3cEponMonitorCycle.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.9 |
h3cEponMonitorCycleMaxValThe upper limit of cycle which be confined to the h3cEponMonitorCycle.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.10 |
h3cEponMsgTimeOutMinValThe lower limit of timeout which be confined to the h3cEponMsgTimeOut.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.11 |
h3cEponMsgTimeOutMaxValThe upper limit of timeout which be confined to the h3cEponMsgTimeOut.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.12 |
h3cEponMsgLoseNumMinValThe lower limit of time which be confined to the h3cEponMsgLoseNum.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.13 |
h3cEponMsgLoseNumMaxValThe upper limit of time which be confined to the h3cEponMsgLoseNum.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.14 |
h3cEponSysScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.1.15 |
h3cEponSysManTableThis table defines system related parameters. SEQUENCE OF H3cEponSysManEntry .1.3.6.1.4.1.2011.10.2.42.1.1.16 |
h3cEponSysManEntryThe entry of the table h3cEponSysManTable. H3cEponSysManEntry .1.3.6.1.4.1.2011.10.2.42.1.1.16.1 |
h3cEponSlotIndexSlot Index, the index of h3cEponSysManTable. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.16.1.1 |
h3cEponModeSwitchcmode - epon standard mode. hmode - private mode.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.1.16.1.2 |
h3cEponAutomaticModeAutomatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.1.16.1.3 |
h3cEponOamDiscoveryTimeoutTime out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.16.1.4 |
h3cEponEncryptionNoReplyTimeOutEncryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.16.1.5 |
h3cEponEncryptionUpdateTimeEncryption key update timer for all ONUs on slot, indicated by h3cEponSlotIndex, ranging from 1 to 255, measured in seconds.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.16.1.6 |
h3cEponAutoBindStatusenable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.1.16.1.7 |
h3cEponAutoUpdateTableEPON auto update ONU application configuration. SEQUENCE OF H3cEponAutoUpdateEntry .1.3.6.1.4.1.2011.10.2.42.1.1.17 |
h3cEponAutoUpdateEntryThe entry of the table h3cEponAutoUpdateTable. H3cEponAutoUpdateEntry .1.3.6.1.4.1.2011.10.2.42.1.1.17.1 |
h3cEponAutoUpdateFileNameThe name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.rw DisplayString .1.3.6.1.4.1.2011.10.2.42.1.1.17.1.1 |
h3cEponAutoUpdateSchedStatusThe status of schedule update configuration. The h3cEponAutoUpdateFileName must be set before enable h3cEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.1.17.1.2 |
h3cEponAutoUpdateSchedTimeThe schedule update timing configuration is related to the h3cEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if h3cEponAutoUpdateSchedStatus is enabled.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.1.17.1.3 |
h3cEponAutoUpdateSchedTypeThe update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.1.17.1.4 |
h3cEponAutoUpdateRealTimeStatusThe status of real time update configuration. The h3cEponAutoUpdateFileName must be set before enable h3cEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.1.17.1.5 |
h3cEponOuiIndexNextTableNext OUI index table. SEQUENCE OF H3cEponOuiIndexNextEntry .1.3.6.1.4.1.2011.10.2.42.1.1.18 |
h3cEponOuiIndexNextEntryThe entry of the table h3cEponOuiIndexNextTable. H3cEponOuiIndexNextEntry .1.3.6.1.4.1.2011.10.2.42.1.1.18.1 |
h3cEponOuiIndexNextThis object contains an appropriate value to be used for h3cEponOuiIndex when creating rows in the h3cEponOuiTable.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.18.1.1 |
h3cEponOuiTableList of OUI and OAM supported by OLT. SEQUENCE OF H3cEponOuiEntry .1.3.6.1.4.1.2011.10.2.42.1.1.19 |
h3cEponOuiEntryThe entry of the table h3cEponOuiTable. H3cEponOuiEntry .1.3.6.1.4.1.2011.10.2.42.1.1.19.1 |
h3cEponOuiIndexThe index of this table. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.19.1.1 |
h3cEponOuiValueOUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.1.19.1.2 |
h3cEponOamVersionVersion of OAM protocol defined by the organization denoted by OUI.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.1.19.1.3 |
h3cEponOuiRowStatusThe status of this table entry. Only active, createAndGo and the destory are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.1.19.1.4 |
h3cEponMulticastControlTableMulticast control global configuration. SEQUENCE OF H3cEponMulticastControlEntry .1.3.6.1.4.1.2011.10.2.42.1.1.20 |
h3cEponMulticastControlEntryThe entry of the table h3cEponMulticastControlTable. H3cEponMulticastControlEntry .1.3.6.1.4.1.2011.10.2.42.1.1.20.1 |
h3cEponMulticastVlanIdThe index of this table. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.1.20.1.1 |
h3cEponMulticastAddressListThe multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.1.20.1.2 |
h3cEponMulticastStatusThe status of this table entry. Only active, createAndGo and the destory are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.1.20.1.3 |
h3cEponFileName OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.2 |
h3cEponDbaUpdateFileNameThe name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.2.1 |
h3cEponOnuUpdateFileNameThe filename of the ONU firmware to be updated. Note that the filename must contain the file path.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.2.2 |
h3cEponOltMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.3 |
h3cOltSysManTableThis table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result SEQUENCE OF H3cOltSysManEntry .1.3.6.1.4.1.2011.10.2.42.1.3.1 |
h3cOltSysManEntryThe entry of the table h3cOltSysManTable. H3cOltSysManEntry .1.3.6.1.4.1.2011.10.2.42.1.3.1.1 |
h3cOltLaserOnTimeThe laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.1.1.1 |
h3cOltLaserOffTimeThe laser off time of the ONUs during the discovery process, measured in TQ.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.1.1.2 |
h3cOltMultiCopyBrdCasttrue/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.1.1.3 |
h3cOltEnableDiscardPacketForward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.1.1.4 |
h3cOltSelfTestselftest(1): Test OLT to check whether it's OK.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.3.1.1.5 |
h3cOltSelfTestResultThe self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.3.1.1.6 |
h3cOltMaxRttSet the max Round Trip Time of this OLT.rw Unsigned32 .1.3.6.1.4.1.2011.10.2.42.1.3.1.1.7 |
h3cOltInfoTablePrimary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (h3cOltFirmMajorVersion, h3cOltFirmMinorVersion, h3cOltHardMajorVersion, h3cOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (h3cOltAgcLockTime, h3cOltAgcCdrTime) (3)The operation(activation) status of an OLT. (h3cOltMacAddress, h3cOltWorkMode) SEQUENCE OF H3cOltInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.3.2 |
h3cOltInfoEntryThe entry of the table h3cOltInfoTable. H3cOltInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.3.2.1 |
h3cOltFirmMajorVersionOLT firmware major version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.1 |
h3cOltFirmMinorVersionOLT firmware minor version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.2 |
h3cOltHardMajorVersionOLT hardware major version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.3 |
h3cOltHardMinorVersionOLT hardware minor version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.4 |
h3cOltAgcLockTimePON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.5 |
h3cOltAgcCdrTimePON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown valuero Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.6 |
h3cOltMacAddressOLT MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.7 |
h3cOltWorkModeThe operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.8 |
h3cOltOpticalPowerTxThe optical power transmitted by this OLT. It measured in 0.01 dBm unit.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.9 |
h3cOltOpticalPowerRxThe burst optical power received by this OLT. It measured in 0.01 dBm unit.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.2.1.10 |
h3cOltDbaManTableThis table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT. SEQUENCE OF H3cOltDbaManEntry .1.3.6.1.4.1.2011.10.2.42.1.3.3 |
h3cOltDbaManEntryThe entry of the table h3cOltDbaManTable. H3cOltDbaManEntry .1.3.6.1.4.1.2011.10.2.42.1.3.3.1 |
h3cOltDbaEnabledTypeEnable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.3.3.1.1 |
h3cOltDbaDiscoveryLengthDiscovery length in TQ units.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.3.1.2 |
h3cOltDbaDiscovryFrequencyHow often should the OLT send discovery frames to the ONUs, measured in grant cycles.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.3.1.3 |
h3cOltDbaCycleLengthThe grant cycle length in TQ units.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.3.1.4 |
h3cOltDbaVersionDBA version of the OLT.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.3.3.1.5 |
h3cOltDbaUpdateUpdate(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module h3cEponDbaUpdateFileName.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.3.3.1.6 |
h3cOltDbaUpdateResultThe latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.3.3.1.7 |
h3cOltPortAlarmThresholdTableThe table defines the alarm threshold of OLT. SEQUENCE OF H3cOltPortAlarmThresholdEntry .1.3.6.1.4.1.2011.10.2.42.1.3.4 |
h3cOltPortAlarmThresholdEntryThe entry of the table h3cOltPortAlarmThresholdTable. H3cOltPortAlarmThresholdEntry .1.3.6.1.4.1.2011.10.2.42.1.3.4.1 |
h3cOltPortAlarmBerEnabledBehavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.1 |
h3cOltPortAlarmBerDirectTraffic direction to monitor for BER alarm.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.2 |
h3cOltPortAlarmBerThresholdBER threshold exceed which the alarm is raised.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.3 |
h3cOltPortAlarmFerEnabledBehavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.4 |
h3cOltPortAlarmFerDirectTraffic direction to monitor for FER alarm.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.5 |
h3cOltPortAlarmFerThresholdFrame error rate exceed threshold then the alarm is raised.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.6 |
h3cOltPortAlarmLlidMismatchEnabledBehavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.7 |
h3cOltPortAlarmLlidMismatchThresholdThe minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.8 |
h3cOltPortAlarmRemoteStableEnabledBehavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.9 |
h3cOltPortAlarmLocalStableEnabledBehavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.10 |
h3cOltPortAlarmRegistrationEnabledBehavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.11 |
h3cOltPortAlarmOamDisconnectionEnabledBehavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.12 |
h3cOltPortAlarmEncryptionKeyEnabledBehavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.13 |
h3cOltPortAlarmVendorSpecificEnabledBehavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.14 |
h3cOltPortAlarmRegExcessEnabledBehavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.15 |
h3cOltPortAlarmDFEEnabledBehavior of device fatal error alarm. true - alarm enable. false - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.4.1.16 |
h3cOltLaserOnTimeMinValThe lower limit of time which is confined to h3cOltLaserOnTime.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.5 |
h3cOltLaserOnTimeMaxValThe upper limit of time which is confined to h3cOltLaserOnTime.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.6 |
h3cOltLaserOffTimeMinValThe lower limit of time which is confined to h3cOltLaserOffTime.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.7 |
h3cOltLaserOffTimeMaxValThe upper limit of time which is confined to h3cOltLaserOffTime.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.8 |
h3cOltDbaDiscoveryLengthMinValThe lower limit of the discovery length which is confined to h3cOltDbaDiscoveryLength.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.9 |
h3cOltDbaDiscoveryLengthMaxValThe upper limit of the discovery length which is confined to h3cOltDbaDiscoveryLength.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.10 |
h3cOltDbaDiscovryFrequencyMinValThe lower limit of the discovery length which is confined to h3cOltDbaDiscovryFrequency.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.11 |
h3cOltDbaDiscovryFrequencyMaxValThe upper limit of the discovery length which is confined to h3cOltDbaDiscovryFrequency.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.12 |
h3cOltDbaCycleLengthMinValThe lower limit of the frames which is confined to h3cOltDbaCycleLength.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.13 |
h3cOltDbaCycleLengthMaxValThe upper limit of the frames which is confined to h3cOltDbaCycleLength.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.14 |
h3cOltPortAlarmLlidMisMinValThe lower limit of the frames which is confined to h3cOltPortAlarmLlidMismatchThreshold.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.15 |
h3cOltPortAlarmLlidMisMaxValThe upper limit of the frames which is confined to h3cOltPortAlarmLlidMismatchThreshold.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.16 |
h3cOltPortAlarmBerMinValThe lower limit of threshold which is confined to h3cOltPortAlarmBerThreshold.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.17 |
h3cOltPortAlarmBerMaxValThe upper limit of threshold which is confined to h3cOltPortAlarmBerThreshold.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.18 |
h3cOltPortAlarmFerMinValThe lower limit of threshold which is confined to h3cOltPortAlarmFerThreshold.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.19 |
h3cOltPortAlarmFerMaxValThe upper limit of threshold which is confined to h3cOltPortAlarmFerThreshold.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.20 |
h3cOnuSilentTableThis table is used for getting silent ONU information of OLT. SEQUENCE OF H3cOnuSilentEntry .1.3.6.1.4.1.2011.10.2.42.1.3.21 |
h3cOnuSilentEntryThe entry of the table h3cOnuSilentTable. H3cOnuSilentEntry .1.3.6.1.4.1.2011.10.2.42.1.3.21.1 |
h3cOnuSilentMacAddrThe MAC address of silent ONUs in OLT. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.21.1.1 |
h3cOnuSilentTimeThe aging time of a silent ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.21.1.2 |
h3cOltUsingOnuTableThe table containing configurations to manage ONU interface(s) based on OLT interface. SEQUENCE OF H3cOltUsingOnuEntry .1.3.6.1.4.1.2011.10.2.42.1.3.22 |
h3cOltUsingOnuEntryThe entry of the table h3cOltUsingOnuTable. H3cOltUsingOnuEntry .1.3.6.1.4.1.2011.10.2.42.1.3.22.1 |
h3cOltUsingOnuNumThe ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.22.1.1 |
h3cOltUsingOnuIfIndexThe ifIndex of the ONU interface.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.3.22.1.2 |
h3cOltUsingOnuRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.3.22.1.3 |
h3cEponOnuMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.5 |
h3cOnuSysManTableThis table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator. SEQUENCE OF H3cOnuSysManEntry .1.3.6.1.4.1.2011.10.2.42.1.5.1 |
h3cOnuSysManEntryThe entry of the table h3cOnuSysManTable. H3cOnuSysManEntry .1.3.6.1.4.1.2011.10.2.42.1.5.1.1 |
h3cOnuEncryptManStart encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.1 |
h3cOnuReAuthorizeRestart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.2 |
h3cOnuMulticastFilterStatustrue(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.3 |
h3cOnuDbaReportQueueSetNumberThe number of queue sets reported in MPCP report frames.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.4 |
h3cOnuRemoteFecStatusValue that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.5 |
h3cOnuPortBerStatusenable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.6 |
h3cOnuResetReboot ONU.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.7 |
h3cOnuMulticastControlModeigmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.8 |
h3cOnuAccessVlanThe VLAN ID assigned to untagged frames received on ONU.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.9 |
h3cOnuEncryptKeyThe encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.rw DisplayString .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.10 |
h3cOnuUniUpDownTrapStatustrue - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.11 |
h3cOnuFecStatusValue that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.12 |
h3cOnuMcastCtrlHostAgingTimeThe host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.13 |
h3cOnuMulticastFastLeaveEnabletrue(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.14 |
h3cOnuPortIsolateEnabletrue(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.1.1.15 |
h3cOnuLinkTestTableLLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames. SEQUENCE OF H3cOnuLinkTestEntry .1.3.6.1.4.1.2011.10.2.42.1.5.2 |
h3cOnuLinkTestEntryThe entry of h3cOnuLinkTestEntry. H3cOnuLinkTestEntry .1.3.6.1.4.1.2011.10.2.42.1.5.2.1 |
h3cOnuLinkTestFrameNumExact number of measurement frames.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.1 |
h3cOnuLinkTestFrameSizeMeasurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.2 |
h3cOnuLinkTestDelaytrue:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.3 |
h3cOnuLinkTestVlanTagtrue:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.4 |
h3cOnuLinkTestVlanPriorityVLAN priority: 0-7.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.5 |
h3cOnuLinkTestVlanTagIDVLAN ID: 1-4094.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.6 |
h3cOnuLinkTestResultSentFrameNumThe total number of frames sent during the link test process.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.7 |
h3cOnuLinkTestResultRetFrameNumThe total number of frames return back during the link test process.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.8 |
h3cOnuLinkTestResultRetErrFrameNumThe total number of error frames return back during the link test process.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.9 |
h3cOnuLinkTestResultMinDelayThe minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay' is set to be true.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.10 |
h3cOnuLinkTestResultMeanDelayThe average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay' is set to be true.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.11 |
h3cOnuLinkTestResultMaxDelayThe maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay' is set to be true.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.2.1.12 |
h3cOnuBandWidthTableSet bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection. SEQUENCE OF H3cOnuBandWidthEntry .1.3.6.1.4.1.2011.10.2.42.1.5.3 |
h3cOnuBandWidthEntryThe entry of table h3cOnuBandWidthTable. H3cOnuBandWidthEntry .1.3.6.1.4.1.2011.10.2.42.1.5.3.1 |
h3cOnuDownStreamBandWidthPolicytrue:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.1 |
h3cOnuDownStreamMaxBandWidthMaximum bandwidth allowed for the ONU, measured in Kbits/Sec.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.2 |
h3cOnuDownStreamMaxBurstSizeMaximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.3 |
h3cOnuDownStreamHighPriorityFirsttrue:Enable high priority frames preference. false:Disable high priority frames preference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.4 |
h3cOnuDownStreamShortFrameFirsttrue:Enable short frames preference. false:Disable short frames preference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.5 |
h3cOnuP2PBandWidthPolicytrue:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.6 |
h3cOnuP2PMaxBandWidthMaximum bandwidth allowed for the ONU, measured in Kbits/Sec.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.7 |
h3cOnuP2PMaxBurstSizeMaximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.8 |
h3cOnuP2PHighPriorityFirsttrue:Enable high priority frames preference. false:Disable high priority frames preference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.9 |
h3cOnuP2PShortFrameFirsttrue:Enable short frames preference. false:Disable short frames preference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.3.1.10 |
h3cOnuSlaManTableTwo types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm. SEQUENCE OF H3cOnuSlaManEntry .1.3.6.1.4.1.2011.10.2.42.1.5.4 |
h3cOnuSlaManEntryThe entry of table h3cOnuSlaManTable. H3cOnuSlaManEntry .1.3.6.1.4.1.2011.10.2.42.1.5.4.1 |
h3cOnuSlaMaxBandWidthMaximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.4.1.1 |
h3cOnuSlaMinBandWidthMinimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.4.1.2 |
h3cOnuSlaBandWidthStepValGranularity of bandwidth - measured in Kbit/s. The value of h3cOnuSlaMaxBandWidth and h3cOnuSlaMinBandWidth should be the multiple of the value of this object.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.4.1.3 |
h3cOnuSlaDelaylow - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.4.1.4 |
h3cOnuSlaFixedBandWidthFixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.4.1.5 |
h3cOnuSlaPriorityClassPrecedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.4.1.6 |
h3cOnuSlaFixedPacketSizeFixed packet size - measured in byte. The value of this object should be valid when h3cOnuSlaFixedBandWidth is configured.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.4.1.7 |
h3cOnuInfoTablePrimary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (h3cOnuHardMajorVersion, h3cOnuHardMinorVersion, h3cOnuUniMacType) (2)Several physical capabilities of the ONU. (h3cOnuLaserOnTime, h3cOnuLaserOffTime, h3cOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (h3cOnuWorkMode) SEQUENCE OF H3cOnuInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.5.5 |
h3cOnuInfoEntryThe entry of the h3cOnuInfoTable. H3cOnuInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.5.5.1 |
h3cOnuHardMajorVersionONU hardware major version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.1 |
h3cOnuHardMinorVersionONU hardware minor version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.2 |
h3cOnuSoftwareVersionONU software version.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.3 |
h3cOnuUniMacTypeONU User Network Interface(UNI) port MAC type.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.4 |
h3cOnuLaserOnTimeThe ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means h3cOnuLaserOnTime is unknown.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.5 |
h3cOnuLaserOffTimeThe ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means h3cOnuLaserOffTime is unknown.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.6 |
h3cOnuGrantFifoDepMaximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.ro Integer32(1..255|2147483647) .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.7 |
h3cOnuWorkModeThe operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.8 |
h3cOnuPCBVersionONU PCB version.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.9 |
h3cOnuRttThe signal round-trip-time(RTT) received.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.10 |
h3cOnuEEPROMVersionONU EEPROM version.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.11 |
h3cOnuRegTypeONU registered type.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.12 |
h3cOnuHostTypeONU host type.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.13 |
h3cOnuDistanceThe distance between OLT and ONU, measured in meter.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.14 |
h3cOnuLlidThe link layer identifier, which uniquely identifies the ONU of a specific OLT.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.15 |
h3cOnuVendorIdONU vendor ID.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.16 |
h3cOnuFirmwareVersionONU firmware version.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.17 |
h3cOnuOpticalPowerReceivedByOltThe burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.5.1.18 |
h3cOnuMacAddrInfoTableThis table used for getting MAC address information of ONU. SEQUENCE OF H3cOnuMacAddrInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.5.6 |
h3cOnuMacAddrInfoEntryThe entry of the h3cEponOnuMacAddrInfoTable. H3cOnuMacAddrInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.5.6.1 |
h3cOnuMacIndexThe index of ONUs in one OLT. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.6.1.1 |
h3cOnuMacAddrFlagThe flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.6.1.2 |
h3cOnuMacAddressThe MAC address of ONU.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.6.1.3 |
h3cOnuBindMacAddrTableThis table implements the following functions for ONUs: Bind MAC of ONU. SEQUENCE OF H3cOnuBindMacAddrEntry .1.3.6.1.4.1.2011.10.2.42.1.5.7 |
h3cOnuBindMacAddrEntryThe entry of the table h3cOnuBindMacAddrTable. H3cOnuBindMacAddrEntry .1.3.6.1.4.1.2011.10.2.42.1.5.7.1 |
h3cOnuBindMacAddressBind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.7.1.1 |
h3cOnuBindTypeSet the binding type with the ONU which is confined to the index of h3cEponOnuTypeDescr.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.7.1.2 |
h3cOnuFirmwareUpdateTableThis table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware. SEQUENCE OF H3cOnuFirmwareUpdateEntry .1.3.6.1.4.1.2011.10.2.42.1.5.8 |
h3cOnuFirmwareUpdateEntryThe entry of the table h3cOnuFirmwareUpdateTable. H3cOnuFirmwareUpdateEntry .1.3.6.1.4.1.2011.10.2.42.1.5.8.1 |
h3cOnuUpdateupdate(1): Update the ONU firmware. Config the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.8.1.1 |
h3cOnuUpdateResultThe ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.8.1.2 |
h3cOnuUpdateFileNameThe filename of the ONU firmware to be updated. Note that the filename must contain the file path.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.8.1.3 |
h3cOnuLinkTestFrameNumMinValThe lower limit of measurement frames which is confined to h3cOnuLinkTestFrameNum.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.9 |
h3cOnuLinkTestFrameNumMaxValThe upper limit of measurement frames which is confined to h3cOnuLinkTestFrameNum.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.10 |
h3cOnuSlaMaxBandWidthMinValThe lower limit of maximum-bandwidth which is confined to h3cOnuSlaMaxBandWidth.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.11 |
h3cOnuSlaMaxBandWidthMaxValThe upper limit of maximum-bandwidth which is confined to h3cOnuSlaMaxBandWidth.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.12 |
h3cOnuSlaMinBandWidthMinValThe lower limit of minimum-bandwidth which is confined to h3cOnuSlaMinBandWidth.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.13 |
h3cOnuSlaMinBandWidthMaxValThe upper limit of minimum-bandwidth which is confined to h3cOnuSlaMinBandWidth.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.14 |
h3cEponOnuTypeManTableThis table is used for getting ONU bind type in current version. SEQUENCE OF H3cEponOnuTypeManEntry .1.3.6.1.4.1.2011.10.2.42.1.5.15 |
h3cEponOnuTypeManEntryThe entry of the h3cEponOnuTypeManTable. H3cEponOnuTypeManEntry .1.3.6.1.4.1.2011.10.2.42.1.5.15.1 |
h3cEponOnuTypeIndexThe ONU type index. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.15.1.1 |
h3cEponOnuTypeDescrThe ONU type description which can be used to bind ONU in current version. the value of h3cOnuBindType can be configured by the index of h3cEponOnuTypeDescr.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.15.1.2 |
h3cOnuPacketManTableThis table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode. SEQUENCE OF H3cOnuPacketManEntry .1.3.6.1.4.1.2011.10.2.42.1.5.16 |
h3cOnuPacketManEntryThe entry of the h3cOnuPacketManTable. H3cOnuPacketManEntry .1.3.6.1.4.1.2011.10.2.42.1.5.16.1 |
h3cOnuPriorityTrustThe QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.16.1.1 |
h3cOnuQueueSchedulerThe packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.16.1.2 |
h3cOnuProtocolTableThis table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping. SEQUENCE OF H3cOnuProtocolEntry .1.3.6.1.4.1.2011.10.2.42.1.5.17 |
h3cOnuProtocolEntryThe entry of h3cOnuProtocolTable. H3cOnuProtocolEntry .1.3.6.1.4.1.2011.10.2.42.1.5.17.1 |
h3cOnuStpStatustrue(1) - STP status enable on ONU. false(2) - STP status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.1 |
h3cOnuIgmpSnoopingStatustrue(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.2 |
h3cOnuDhcpsnoopingOption82true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.3 |
h3cOnuDhcpsnoopingtrue(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.4 |
h3cOnuPppoetrue(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.5 |
h3cOnuIgmpSnoopingHostAgingTSet the host aging time of IGMP on ONU.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.6 |
h3cOnuIgmpSnoopingMaxRespTSet the max response time of IGMP on ONU.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.7 |
h3cOnuIgmpSnoopingRouterAgingTSet the router aging time of IGMP on ONU.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.8 |
h3cOnuIgmpSnoopingAggReportStrue(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.9 |
h3cOnuIgmpSnoopingAggLeaveStrue(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.17.1.10 |
h3cOnuDot1xTableThis table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable. SEQUENCE OF H3cOnuDot1xEntry .1.3.6.1.4.1.2011.10.2.42.1.5.18 |
h3cOnuDot1xEntryThe entry of the h3cOnuDot1xTable. H3cOnuDot1xEntry .1.3.6.1.4.1.2011.10.2.42.1.5.18.1 |
h3cOnuDot1xAccountONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with h3cOnuDot1xPassword.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.18.1.1 |
h3cOnuDot1xPasswordONU 802.1X password. The object should be set together with h3cOnuDot1xAccount.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.18.1.2 |
h3cOnuPriorityQueueTableThis table contains specific information of priority queue. SEQUENCE OF H3cOnuPriorityQueueEntry .1.3.6.1.4.1.2011.10.2.42.1.5.19 |
h3cOnuPriorityQueueEntryThe entry of h3cOnuPriorityQueueTable. H3cOnuPriorityQueueEntry .1.3.6.1.4.1.2011.10.2.42.1.5.19.1 |
h3cOnuQueueDirectionThe direction of priority queue. Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.19.1.1 |
h3cOnuQueueIdThe queue ID of priority queue. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.19.1.2 |
h3cOnuQueueSizeThe size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of h3cOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.19.1.3 |
h3cOnuCountTableThis table contains statistics of ONU port. SEQUENCE OF H3cOnuCountEntry .1.3.6.1.4.1.2011.10.2.42.1.5.20 |
h3cOnuCountEntryThe entry of h3cOnuCountTable. H3cOnuCountEntry .1.3.6.1.4.1.2011.10.2.42.1.5.20.1 |
h3cOnuInCRCErrPktsThe total number of frames received with bad CRC checksum.ro Counter64 .1.3.6.1.4.1.2011.10.2.42.1.5.20.1.1 |
h3cOnuOutDroppedFramesThe total number of frames dropped because of buffer failure.ro Counter64 .1.3.6.1.4.1.2011.10.2.42.1.5.20.1.2 |
h3cEponOnuScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.5.21 |
h3cOnuPriorityQueueSizeMinValThe lower limit of queue size which is confined to h3cOnuQueueSize.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.21.1 |
h3cOnuPriorityQueueSizeMaxValThe upper limit of queue size which is confined to h3cOnuQueueSize.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.21.2 |
h3cOnuPriorityQueueBandwidthMinValThe lower limit of h3cOnuQueueMaxBandwidth.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.21.3 |
h3cOnuPriorityQueueBandwidthMaxValThe upper limit of h3cOnuQueueMaxBandwidth.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.21.4 |
h3cOnuPriorityQueueBurstsizeMinValThe lower limit of h3cOnuQueueMaxBurstsize.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.21.5 |
h3cOnuPriorityQueueBurstsizeMaxValThe upper limit of h3cOnuQueueMaxBurstsize.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.21.6 |
h3cOnuUpdateByTypeNextIndexOffer a free index of h3cOnuFirmwareUpdateByTypeTable.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.21.7 |
h3cOnuQueueBandwidthTableThis table contains specific bandwidth information of ONU priority queue. SEQUENCE OF H3cOnuQueueBandwidthEntry .1.3.6.1.4.1.2011.10.2.42.1.5.22 |
h3cOnuQueueBandwidthEntryThe entry of h3cOnuQueueBandwidthTable. H3cOnuQueueBandwidthEntry .1.3.6.1.4.1.2011.10.2.42.1.5.22.1 |
h3cOnuQueueMaxBandwidthThe maximum bandwidth of specific ONU priority queue, measured in 100Kbps.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.22.1.1 |
h3cOnuQueueMaxBurstsizeThe maximum burst size of specific ONU priority queue, measured in 64Bytes.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.22.1.2 |
h3cOnuQueuePolicyStatustrue - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.22.1.3 |
h3cOnuIpAddressTableONU IP address table. SEQUENCE OF H3cOnuIpAddressEntry .1.3.6.1.4.1.2011.10.2.42.1.5.23 |
h3cOnuIpAddressEntryThe entry of h3cOnuIpAddressTable. H3cOnuIpAddressEntry .1.3.6.1.4.1.2011.10.2.42.1.5.23.1 |
h3cOnuIpAddressThe IP address assigned to the ONU.rw IpAddress .1.3.6.1.4.1.2011.10.2.42.1.5.23.1.1 |
h3cOnuIpAddressMaskThe mask of IP address denoted by h3cOnuIpAddress.rw IpAddress .1.3.6.1.4.1.2011.10.2.42.1.5.23.1.2 |
h3cOnuIpAddressGatewayThe gateway of IP address denoted by h3cOnuIpAddress.rw IpAddress .1.3.6.1.4.1.2011.10.2.42.1.5.23.1.3 |
h3cOnuDhcpallocatetrue(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.23.1.4 |
h3cOnuManageVIDThe management VLAN of ONU denoted by h3cOnuManageVID.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.23.1.5 |
h3cOnuManageVlanIntfSThe management interface status of ONU denoted by h3cOnuManageVlanIntfS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.23.1.6 |
h3cOnuChipSetInfoTableONU vendor specific information of ONU. SEQUENCE OF H3cOnuChipSetInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.5.24 |
h3cOnuChipSetInfoEntryThe entry of h3cOnuChipSetInfoTable. H3cOnuChipSetInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.5.24.1 |
h3cOnuChipSetVendorIdChipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.24.1.1 |
h3cOnuChipSetModelChip model, numbering(range from 0 to 0xFF) by the chip vendor.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.24.1.2 |
h3cOnuChipSetRevisionChip revision.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.24.1.3 |
h3cOnuChipSetDesignDateChip design date.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.24.1.4 |
h3cOnuCapabilityTableCapability of ONU. SEQUENCE OF H3cOnuCapabilityEntry .1.3.6.1.4.1.2011.10.2.42.1.5.25 |
h3cOnuCapabilityEntryThe entry of the table h3cOnuCapabilityTable. H3cOnuCapabilityEntry .1.3.6.1.4.1.2011.10.2.42.1.5.25.1 |
h3cOnuServiceSupportedServices types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.ro Bits .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.1 |
h3cOnuGEPortNumberThe current gigabit ethernet ports number supported by the ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.2 |
h3cOnuFEPortNumberthe current fast ethernet ports number supported by the ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.3 |
h3cOnuPOTSPortNumberThe current POTS ports number supported by the ONUro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.4 |
h3cOnuE1PortsNumberThe current E1 ports number supported by the ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.5 |
h3cOnuUpstreamQueueNumberThe number of upstream queues supported by the ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.6 |
h3cOnuMaxUpstreamQueuePerPortThe number of maximum upstream queues per port of the ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.7 |
h3cOnuDownstreamQueueNumberThe number of downstream queues supported by the ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.8 |
h3cOnuMaxDownstreamQueuePerPortThe number of maximum downstream queues per port of the ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.9 |
h3cOnuBatteryBackuptrue(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.10 |
h3cOnuIgspFastLeaveSupportedtrue(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.11 |
h3cOnuMCtrlFastLeaveSupportedtrue(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.25.1.12 |
h3cOnuDbaReportTableThis table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames. SEQUENCE OF H3cOnuDbaReportEntry .1.3.6.1.4.1.2011.10.2.42.1.5.26 |
h3cOnuDbaReportEntryThe entry of the table h3cOnuDbaReportTable. H3cOnuDbaReportEntry .1.3.6.1.4.1.2011.10.2.42.1.5.26.1 |
h3cOnuDbaReportQueueIdThe DBA report queue ID. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.26.1.1 |
h3cOnuDbaReportThresholdThe threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.26.1.2 |
h3cOnuDbaReportStatusenable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.26.1.3 |
h3cOnuCosToLocalPrecedenceTableTable of map of the COS to local-precedence. SEQUENCE OF H3cOnuCosToLocalPrecedenceEntry .1.3.6.1.4.1.2011.10.2.42.1.5.27 |
h3cOnuCosToLocalPrecedenceEntryConfiguration information of map of the COS to local precedence. H3cOnuCosToLocalPrecedenceEntry .1.3.6.1.4.1.2011.10.2.42.1.5.27.1 |
h3cOnuCosToLocalPrecedenceCosIndexIndex of the map, obtains from packet cos value.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.27.1.1 |
h3cOnuCosToLocalPrecedenceValueValue of local precedence.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.27.1.2 |
h3cEponOnuStpPortTableTable of ONU STP ports. SEQUENCE OF H3cEponOnuStpPortEntry .1.3.6.1.4.1.2011.10.2.42.1.5.28 |
h3cEponOnuStpPortEntryConfiguration information of ONU STP ports. H3cEponOnuStpPortEntry .1.3.6.1.4.1.2011.10.2.42.1.5.28.1 |
h3cEponStpPortIndexThe index of the STP ports.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.28.1.1 |
h3cEponStpPortDescrThe description of the STP ports.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.5.28.1.2 |
h3cEponStpPortStateThe current state of the port (i.e. disabled, discarding, learning and forwarding).ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.28.1.3 |
h3cOnuPhysicalTableThis table is used for getting ONU physical information. SEQUENCE OF H3cOnuPhysicalEntry .1.3.6.1.4.1.2011.10.2.42.1.5.29 |
h3cOnuPhysicalEntryThe entry of the h3cOnuPhysicalTable. H3cOnuPhysicalEntry .1.3.6.1.4.1.2011.10.2.42.1.5.29.1 |
h3cOnuBridgeMacThe bridge MAC address of ONU.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.29.1.1 |
h3cOnuFirstPonMacThe MAC address of ONU first PON port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.29.1.2 |
h3cOnuFirstPonRegStateThe register state of ONU first PON port.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.29.1.3 |
h3cOnuSecondPonMacThe MAC address of ONU second PON port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.29.1.4 |
h3cOnuSecondPonRegStateThe register state of ONU second PON port.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.29.1.5 |
h3cOnuSmlkTableThis table is used for getting ONU SMLK information. SEQUENCE OF H3cOnuSmlkEntry .1.3.6.1.4.1.2011.10.2.42.1.5.30 |
h3cOnuSmlkEntryThe entry of the h3cOnuSmlkTable. H3cOnuSmlkEntry .1.3.6.1.4.1.2011.10.2.42.1.5.30.1 |
h3cOnuSmlkGroupIDThe SMLK group ID of ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.30.1.1 |
h3cOnuSmlkFirstPonRoleThe role of ONU first PON port in a SMLK group.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.30.1.2 |
h3cOnuSmlkFirstPonStatusThe transmitting status of ONU first PON port in a SMLK group.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.30.1.3 |
h3cOnuSmlkSecondPonRoleThe role of ONU second PON port in a SMLK group.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.30.1.4 |
h3cOnuSmlkSecondPonStatusThe transmitting status of ONU second PON port in a SMLK group.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.30.1.5 |
h3cOnuRS485PropertiesTableProperty table. SEQUENCE OF H3cOnuRS485PropertiesEntry .1.3.6.1.4.1.2011.10.2.42.1.5.31 |
h3cOnuRS485PropertiesEntryThe entry of property table. H3cOnuRS485PropertiesEntry .1.3.6.1.4.1.2011.10.2.42.1.5.31.1 |
h3cOnuRS485SerialIndexThe index of serial port. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.1 |
h3cOnuRS485BaudRateThe port baud rate.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.2 |
h3cOnuRS485DataBitsThe port number of data bits in a character.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.3 |
h3cOnuRS485ParityThe port sense of a character parity bit.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.4 |
h3cOnuRS485StopBitsThe port number of stop bits.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.5 |
h3cOnuRS485FlowControlThe port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.6 |
h3cOnuRS485TXOctetsThe number of output octets about the port. The unit is byte.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.7 |
h3cOnuRS485RXOctetsThe number of input octets about the port. The unit is byte.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.8 |
h3cOnuRS485TXErrOctetsThe number of output error octets about the port. The unit is byte.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.9 |
h3cOnuRS485RXErrOctetsThe number of input error octets about the port. The unit is byte.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.10 |
h3cOnuRS485ResetStatisticsReset the counters to zero, including h3cOnuRS485TXOctets, h3cOnuRS485RXOctets, h3cOnuRS485TXErrOctets and h3cOnuRS485RXErrOctets.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.31.1.11 |
h3cOnuRS485SessionSummaryTableSession summary table. SEQUENCE OF H3cOnuRS485SessionSummaryEntry .1.3.6.1.4.1.2011.10.2.42.1.5.32 |
h3cOnuRS485SessionSummaryEntryThe entry of session summary table. H3cOnuRS485SessionSummaryEntry .1.3.6.1.4.1.2011.10.2.42.1.5.32.1 |
h3cOnuRS485SessionMaxNumThe max session number of every serial port which can be supported.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.32.1.1 |
h3cOnuRS485SessionNextIndexThe next valid index used for creating a new session raw. When there is no valid index left, it will return 0.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.32.1.2 |
h3cOnuRS485SessionTableRS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets. SEQUENCE OF H3cOnuRS485SessionEntry .1.3.6.1.4.1.2011.10.2.42.1.5.33 |
h3cOnuRS485SessionEntryThe entry of session table. H3cOnuRS485SessionEntry .1.3.6.1.4.1.2011.10.2.42.1.5.33.1 |
h3cOnuRS485SessionIndexRaw session index. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.33.1.1 |
h3cOnuRS485SessionTypeThe type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.5.33.1.2 |
h3cOnuRS485SessionAddTypeThis object indicates the transport type of the address contained in h3cOnuRS485SessionRemoteIP object.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.42.1.5.33.1.3 |
h3cOnuRS485SessionRemoteIPThe IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.42.1.5.33.1.4 |
h3cOnuRS485SessionRemotePortThe port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.33.1.5 |
h3cOnuRS485SessionLocalPortLocal socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.1.5.33.1.6 |
h3cOnuRS485SessionRowStatusThe status used for creating, modifying, and deleting instances of the columnar objects in raw session table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.33.1.7 |
h3cOnuRS485SessionErrInfoTableError information table. When failed to create a session, error information can be got from this table. SEQUENCE OF H3cOnuRS485SessionErrInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.5.34 |
h3cOnuRS485SessionErrInfoEntryThe entry of error information table. H3cOnuRS485SessionErrInfoEntry .1.3.6.1.4.1.2011.10.2.42.1.5.34.1 |
h3cOnuRS485SessionErrInfoError information string. When a response with 'noCreeation' for row creation in table h3cOnuRS485SessionTable, the error reason can be got from this object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.5.34.1.1 |
h3cEponBatchOperationMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.6 |
h3cEponBatchOperationBySlotTableThis table is used for batch operation by slot. SEQUENCE OF H3cEponBatchOperationBySlotEntry .1.3.6.1.4.1.2011.10.2.42.1.6.1 |
h3cEponBatchOperationBySlotEntryThe entry of the h3cEponBatchOperationBySlotTable. H3cEponBatchOperationBySlotEntry .1.3.6.1.4.1.2011.10.2.42.1.6.1.1 |
h3cEponBatchOperationBySlotIndexThe EPON board index. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.6.1.1.1 |
h3cEponBatchOperationBySlotTypeThe types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module h3cEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.6.1.1.2 |
h3cEponBatchOperationBySlotExecute batch operation.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.6.1.1.3 |
h3cEponBatchOperationBySlotResultThe result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.6.1.1.4 |
h3cEponBatchOperationByOLTTableThis table is used for batch operation by OLT. SEQUENCE OF H3cEponBatchOperationByOLTEntry .1.3.6.1.4.1.2011.10.2.42.1.6.2 |
h3cEponBatchOperationByOLTEntryThe entry of the h3cEponBatchOperationByOLTTable. H3cEponBatchOperationByOLTEntry .1.3.6.1.4.1.2011.10.2.42.1.6.2.1 |
h3cEponBatchOperationByOLTTypeThe types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.6.2.1.1 |
h3cEponBatchOperationByOLTExecute batch operation.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.1.6.2.1.2 |
h3cEponBatchOperationByOLTResultThe result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.6.2.1.3 |
h3cOnuFirmwareUpdateByTypeTableThis table is used to update ONU by ONU type. SEQUENCE OF H3cOnuFirmwareUpdateByTypeEntry .1.3.6.1.4.1.2011.10.2.42.1.6.3 |
h3cOnuFirmwareUpdateByTypeEntryThe entry of the h3cOnuFirmwareUpdateByTypeTable. H3cOnuFirmwareUpdateByTypeEntry .1.3.6.1.4.1.2011.10.2.42.1.6.3.1 |
h3cOnuUpdateByOnuTypeIndexThe type and file relationship table entry index. Integer32 .1.3.6.1.4.1.2011.10.2.42.1.6.3.1.1 |
h3cOnuUpdateByTypeOnuTypeThe type of ONUs.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.6.3.1.2 |
h3cOnuUpdateByTypeFileNameThe file to be updated for the type of ONUs.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.6.3.1.3 |
h3cOnuUpdateByTypeRowStatusThe status of this table entry. Only createAndGo and destroy actions are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.1.6.3.1.4 |
h3cEponErrorInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.7 |
h3cEponSoftwareErrorCodeOLT software error code.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.7.1 |
h3cOamVendorSpecificAlarmCodeAlarm code of the vendor.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.7.2 |
h3cEponOnuRegErrorMacAddrThe MAC of ONU registered error.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.7.3 |
h3cOamEventLogTypeThe type of event that generated this entry in the event log.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.1.7.4 |
h3cOamEventLogLocationWhether this event occurred locally, or was received from the OAM peer via Ethernet OAM.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.7.5 |
h3cEponLoopbackPortIndexThe index of port which generate loop back event.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.1.7.6 |
h3cEponLoopbackPortDescrA textual string containing information about the port generated loop back event.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.7.7 |
h3cOltPortAlarmLlidMisFramesthe amount of mismatched frames about the LLID mismatch alarm.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.1.7.8 |
h3cOltPortAlarmBererror bit rate.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.1.7.9 |
h3cOltPortAlarmFererror frames rate.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.1.7.10 |
h3cEponOnuRegSilentMacThe MAC of silent ONU.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.7.11 |
h3cEponOperationResultThe result of EPON operation.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.1.7.12 |
h3cEponOnuLaserStateThe state of ONU laser.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.1.7.13 |
h3cEponTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.8 |
h3cEponTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.8.0 |
h3cEponPortAlarmBerTrapA h3cEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.1 |
h3cEponPortAlarmFerTrapA h3cEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.2 |
h3cEponErrorLLIDFrameTrapA h3cEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.3 |
h3cEponLoopBackEnableTrapA h3cEponLoopBackEnableTrap notification is sent when the loop back command is committed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.4 |
h3cEponOnuRegistrationErrTrapA h3cEponOnuRegistrationErrTrap notification is sent when a ONU register failed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.5 |
h3cEponOamDisconnectionTrapA h3cEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.6 |
h3cEponEncryptionKeyErrTrapA h3cEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.7 |
h3cEponRemoteStableTrapA h3cEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.8 |
h3cEponLocalStableTrapA h3cEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.9 |
h3cEponOamVendorSpecificTrapA h3cEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.10 |
h3cEponSoftwareErrTrapA h3cEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.11 |
h3cEponPortAlarmBerRecoverTrapA h3cEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.12 |
h3cEponPortAlarmFerRecoverTrapA h3cEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.13 |
h3cEponErrorLLIDFrameRecoverTrapA h3cEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.14 |
h3cEponLoopBackEnableRecoverTrapA h3cEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.15 |
h3cEponOnuRegistrationErrRecoverTrapA h3cEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.16 |
h3cEponOamDisconnectionRecoverTrapA h3cEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.17 |
h3cEponEncryptionKeyErrRecoverTrapA h3cEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.18 |
h3cEponRemoteStableRecoverTrapA h3cEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.19 |
h3cEponLocalStableRecoverTrapA h3cEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.20 |
h3cEponOamVendorSpecificRecoverTrapA h3cEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.21 |
h3cEponSoftwareErrRecoverTrapA h3cEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.22 |
h3cDot3OamThresholdRecoverEventA h3cDot3OamThresholdRecoverEvent notification is sent when h3cDot3OamThresholdEvent is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.23 |
h3cDot3OamNonThresholdRecoverEventA h3cDot3OamNonThresholdRecoverEvent notification is sent when h3cDot3OamNonThresholdEvent is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.24 |
h3cEponOnuRegExcessTrapA h3cEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.25 |
h3cEponOnuRegExcessRecoverTrapA h3cEponOnuRegExcessRecoverTrap notification is sent when h3cEponOnuRegExcessTrap is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.26 |
h3cEponOnuPowerOffTrapA h3cEponOnuPowerOffTrap notification is sent when ONU is power off. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.27 |
h3cEponOltSwitchoverTrapA h3cEponOltSwithoverTrap notification is sent when OLT switchover is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.28 |
h3cEponOltDFETrapA h3cEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.29 |
h3cEponOltDFERecoverTrapA h3cEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.30 |
h3cEponOnuSilenceTrapThe h3cEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.31 |
h3cEponOnuSilenceRecoverTrapThe h3cEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.32 |
h3cEponOnuUpdateResultTrapA h3cEponUpdateResultTrap notification is sent when an ONU reported its firmware update result. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.33 |
h3cEponOnuAutoBindTrapA h3cEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.34 |
h3cEponOnuPortStpStateTrapA h3cEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.35 |
h3cEponOnuLaserFailedTrapA h3cEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life). NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.36 |
h3cOnuSmlkSwitchoverTrapA h3cOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.1.8.0.37 |
h3cEponStat OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.1.9 |
h3cEponStatTableThis table contains line code error statistics of epon port. SEQUENCE OF H3cEponStatEntry .1.3.6.1.4.1.2011.10.2.42.1.9.1 |
h3cEponStatEntryThe entry of h3cEponStatTable. H3cEponStatEntry .1.3.6.1.4.1.2011.10.2.42.1.9.1.1 |
h3cEponStatFERThe frame error rate of epon port, measured in 1e-9 unit.ro Counter64 .1.3.6.1.4.1.2011.10.2.42.1.9.1.1.1 |
h3cEponStatBERThe bit error rate of epon port, measured in 1e-9 unit.ro Counter64 .1.3.6.1.4.1.2011.10.2.42.1.9.1.1.2 |