H3C-DOT11-WLANEXT-MIB
The H3C-DOT11-WLANEXT-MIB enables monitoring and management of H3C wireless LAN infrastructure, specifically tracking Fat AP, Fit AP, and Access Controller (AC) operational states, CAPWAP tunnel configurations, and IEEE 802.11e QoS parameters within Basic Service Sets (BSS). This module facilitates granular visibility into radio chipset performance, access control policies, and the association metrics of stations connecting to the wireless network.
Imported Objects
Objects
22 total| Object Name |
|---|
h3cDot11WLANEXTThis MIB provides more information for WLAN network. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11e Standard to define the MAC procedures to support LAN applications with Quality of Service (QoS) requirements, including the transport of voice, audio and video over IEEE 802.11 wireless LANs. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.75.7 |
h3cDot11RFGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.7.1 |
h3cDot11RFSignalStatisTableThe table will describe statistic information of signal strength for AP radio. SEQUENCE OF H3cDot11RFSignalStatisEntry .1.3.6.1.4.1.2011.10.2.75.7.1.1 |
h3cDot11RFSignalStatisEntryEach entry contains the signal of each signal strength information of a specific AP. H3cDot11RFSignalStatisEntry .1.3.6.1.4.1.2011.10.2.75.7.1.1.1 |
h3cDot11RFAPIDTo identify each AP, and AP is running status. H3cDot11ObjectIDType (H3C-DOT11-REF-MIB) .1.3.6.1.4.1.2011.10.2.75.7.1.1.1.1 |
h3cDot11RFRadioIDRepresents each radio. H3cDot11RadioScopeType (H3C-DOT11-REF-MIB) .1.3.6.1.4.1.2011.10.2.75.7.1.1.1.2 |
h3cDot11RFSignalStatisIntervRepresents the interval of statistic.ro Integer32 UNITS "second" .1.3.6.1.4.1.2011.10.2.75.7.1.1.1.3 |
h3cDot11RFAverageSignalStrengthRepresents the average value of signal strength for stations on a specific radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.2011.10.2.75.7.1.1.1.4 |
h3cDot11RFMaxSignalStrengthRepresents the maximum value of signal strength for stations on a specific radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.2011.10.2.75.7.1.1.1.5 |
h3cDot11RFMinSignalStrengthRepresents the minimum value of signal strength for stations on a specific radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.2011.10.2.75.7.1.1.1.6 |
h3cDot11QosGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.7.2 |
h3cDot11QosStatisTableThe table defines the attributes for the Qos feature of radio. SEQUENCE OF H3cDot11QosStatisEntry .1.3.6.1.4.1.2011.10.2.75.7.2.1 |
h3cDot11QosStatisEntryEach entry contains information of the Qos attribute of each radio. H3cDot11QosStatisEntry .1.3.6.1.4.1.2011.10.2.75.7.2.1.1 |
h3cDot11QosAPIDTo uniquely identify a AP in running status. H3cDot11ObjectIDType (H3C-DOT11-REF-MIB) .1.3.6.1.4.1.2011.10.2.75.7.2.1.1.1 |
h3cDot11QosRadioIDRepresents each radio. H3cDot11RadioScopeType (H3C-DOT11-REF-MIB) .1.3.6.1.4.1.2011.10.2.75.7.2.1.1.2 |
h3cDot11QosAverageQueLenThe average frame numbers to be sent out in the queue.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.7.2.1.1.3 |
h3cDot11QosDropFrameRatioThe ratio of dropped frames in a minute because of full queue.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.7.2.1.1.4 |
h3cDot11QosAverageDataRateThe average transmit data rate of radio.ro Integer32 UNITS "Kbps" .1.3.6.1.4.1.2011.10.2.75.7.2.1.1.5 |
h3cDot11QosAcStatisTableThe table defines the parameters for Qos access category. SEQUENCE OF H3cDot11QosAcStatisEntry .1.3.6.1.4.1.2011.10.2.75.7.2.2 |
h3cDot11QosAcStatisEntryEach entry contains information of each Qos access category. H3cDot11QosAcStatisEntry .1.3.6.1.4.1.2011.10.2.75.7.2.2.1 |
h3cDot11QosAcTypeThe access category type. H3cDot11QosAcType (H3C-DOT11-REF-MIB) .1.3.6.1.4.1.2011.10.2.75.7.2.2.1.1 |
h3cDot11AcDropFrameCntThe number of dropped frames in a minute for one specific access category because of full queue.ro Counter32 .1.3.6.1.4.1.2011.10.2.75.7.2.2.1.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.