H3C-DOT11-ACMT-MIB
AI MIB Summary
The H3C-DOT11-ACMT-MIB module enables monitoring of CAPWAP tunnel states and management metrics for H3C wireless Access Controllers (AC) and Fit Access Points (APs), specifically tracking BSS associations, radio chipsets, and entity relationships via entPhysicalIndex. It facilitates the collection of operational data regarding the control plane and data plane tunnels established between the AC and APs to support enterprise wireless network administration.
This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
Main OID:
h3cDot11ACMT.1.3.6.1.4.1.2011.10.2.75.1
81
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
81 total| Object Name |
|---|
h3cDot11ACMTThis MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.75.1 |
h3cDot11ACObjectGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.1 |
h3cDot11ACObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.1.1 |
h3cDot11CurrentACMACModeRepresents which MAC mode defined in the CAPWAP draft is in use for the AC.ro H3cDot11MACModeType (H3C-DOT11-REF-MIB) .1.3.6.1.4.1.2011.10.2.75.1.1.1.1 |
h3cDot11MaxAPNumPermittedRepresents the maximum number of AP connection permitted for one AC.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.1.2 |
h3cDot11MaxStationNumPermittedRepresents the maximum number of station connection permitted for one AC.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.1.3 |
h3cDot11ACLoadInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.1.2 |
h3cDot11APConnectCountRepresents the total number of APs which are connecting to AC.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.1 |
h3cDot11StationConnectCountRepresents the total number of stations which are accessing the WLAN service through AC.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.2 |
h3cDot11ACIFLoadInfoTableRepresents AP number information of interface. SEQUENCE OF H3cDot11ACIFLoadInfoEntry .1.3.6.1.4.1.2011.10.2.75.1.1.2.3 |
h3cDot11ACIFLoadInfoEntryEach entry represents AP number information of an interface H3cDot11ACIFLoadInfoEntry .1.3.6.1.4.1.2011.10.2.75.1.1.2.3.1 |
h3cDot11ACIfIndexRepresents index of AC interface.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.3.1.1 |
h3cDot11ACIfApNumRepresents AP number connected to the AC interface.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.3.1.2 |
h3cDot11ACIfStaNumRepresents Station number connected to the AC interface.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.3.1.3 |
h3cDot11ACIfNameRepresents InterfaceName AP number connected to AC interface.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.75.1.1.2.3.1.4 |
h3cDot11MasterAPCountRepresents the total number of AP which have established the master tunnel with AC.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.4 |
h3cDot11SlaveAPCountRepresents the total number of AP which have established the slave tunnel with AC.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.5 |
h3cDot11ConnectAutoAPCountRepresents the total number of auto AP which are connecting to AC.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.6 |
h3cDot11PersistentAPCountRepresents the total number of persistent AP.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.7 |
h3cDot11AcUploadFrameCntRepresents the number of frames that AP sends to AC through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.75.1.1.2.8 |
h3cDot11AcDownloadFrameCntRepresents the number of frames that AC sends to AP through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.75.1.1.2.9 |
h3cDot11AcUploadFrameBytesRepresents the bytes of frames that AP sends to AC through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.75.1.1.2.10 |
h3cDot11AcDownloadFrameBytesRepresents the bytes of frames that AC sends to AP through LWAPP tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.75.1.1.2.11 |
h3cDot11BackupACRoleThis object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC.ro Enumeration .1.3.6.1.4.1.2011.10.2.75.1.1.2.12 |
h3cDot11BackupACNMSIPThis object represents the manger IP address of the slave ac.ro IpAddress .1.3.6.1.4.1.2011.10.2.75.1.1.2.13 |
h3cDot11ACBackupModeThis object represents the ac backup mode.ro Enumeration .1.3.6.1.4.1.2011.10.2.75.1.1.2.14 |
h3cDot11ACBackupStatusThis object represents the ac backup status.ro Enumeration .1.3.6.1.4.1.2011.10.2.75.1.1.2.15 |
h3cDot11ACSwitchCntThis object represents the ac switch times.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.2.16 |
h3cDot11WLANAssocStatisInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.1.3 |
h3cDot11StationAssocSumRepresents the total number of station association.ro Counter32 .1.3.6.1.4.1.2011.10.2.75.1.1.3.1 |
h3cDot11StationAssocFailSumRepresents the total number of station association failure.ro Counter32 .1.3.6.1.4.1.2011.10.2.75.1.1.3.2 |
h3cDot11StationReassocSumRepresents the total number of station reassociation.ro Counter32 .1.3.6.1.4.1.2011.10.2.75.1.1.3.3 |
h3cDot11StationAssocRejectedSumRepresents the total number of station association rejected on account of resource limit.ro Counter32 .1.3.6.1.4.1.2011.10.2.75.1.1.3.4 |
h3cDot11StationExDeAuthenSumRepresents the total number of exceptional station deauthentication (Without sending a deauthentication to AP).ro Counter32 .1.3.6.1.4.1.2011.10.2.75.1.1.3.5 |
h3cDot11StationCurAssocSumRepresents the total number of current associated stations.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.3.6 |
h3cDot11ACBASInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.1.4 |
h3cDot11ACBASSysObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.1.4.1 |
h3cDot11ACBASTableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.1.4.2 |
h3cDot11ACBASIfTableRepresents the BAS information of interfaces. SEQUENCE OF H3cDot11ACBASIfEntry .1.3.6.1.4.1.2011.10.2.75.1.1.4.2.3 |
h3cDot11ACBASIfEntryEach entry represents the BAS information of an interface H3cDot11ACBASIfEntry .1.3.6.1.4.1.2011.10.2.75.1.1.4.2.3.1 |
h3cDot11ACBASIfIndexThe ifIndex of the BAS interface. Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.4.2.3.1.1 |
h3cDot11ACBASIfDescrA textual string containing information about the BAS interface.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.75.1.1.4.2.3.1.2 |
h3cDot11ACBASIfTypeThe type of the BAS interface.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.2011.10.2.75.1.1.4.2.3.1.3 |
h3cDot11ACStaUserSecAuthStatis OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.1.5 |
h3cDot11ACStaUserAuthCurNumberRepresents the current number of user authenticated with this AC.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.1.5.1 |
h3cDot11ACStaUserConnFailCntRepresents the total number of user disconnected with this AC.ro Counter32 .1.3.6.1.4.1.2011.10.2.75.1.1.5.2 |
h3cDot11ACStaUserAuthReqCntRepresents the total number of user authenticate request with this AC.ro Counter32 .1.3.6.1.4.1.2011.10.2.75.1.1.5.3 |
h3cDot11ACStaUserAuthSuccCntRepresents the total number of user authenticated successed with this AC.ro Counter32 .1.3.6.1.4.1.2011.10.2.75.1.1.5.4 |
h3cDot11ACStaUserAuthFailCntRepresents the total number of user authenticated failed with this AC.ro Counter32 .1.3.6.1.4.1.2011.10.2.75.1.1.5.5 |
h3cDot11CAPWAPTunnelGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.2 |
h3cDot11CAPWAPTunnelTableThe table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol. SEQUENCE OF H3cDot11CAPWAPTunnelEntry .1.3.6.1.4.1.2011.10.2.75.1.2.1 |
h3cDot11CAPWAPTunnelEntryEach entry contains information of data tunnel and control tunnel of AP which is connecting to AC. H3cDot11CAPWAPTunnelEntry .1.3.6.1.4.1.2011.10.2.75.1.2.1.1 |
h3cDot11CurrTunnelAPIDTo uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC.ro H3cDot11ObjectIDType (H3C-DOT11-REF-MIB) .1.3.6.1.4.1.2011.10.2.75.1.2.1.1.1 |
h3cDot11CtrlTunnelCurrSecRepresents what security scheme is in use for control tunnel.ro H3cDot11TunnelSecSchemType (H3C-DOT11-REF-MIB) .1.3.6.1.4.1.2011.10.2.75.1.2.1.1.2 |
h3cDot11CtrlTunnelUpTimeRepresents how long for control tunnel up. If the value is zero, then tunnel is not set up.ro Integer32 UNITS "second" .1.3.6.1.4.1.2011.10.2.75.1.2.1.1.3 |
h3cDot11DataTunnelCurrSecRepresents what security scheme is in use for data tunnel.ro H3cDot11TunnelSecSchemType (H3C-DOT11-REF-MIB) .1.3.6.1.4.1.2011.10.2.75.1.2.1.1.4 |
h3cDot11DataTunnelUpTimeRepresents how long for data tunnel up. If the value is zero, then tunnel is not set up.ro Integer32 UNITS "second" .1.3.6.1.4.1.2011.10.2.75.1.2.1.1.5 |
h3cDot11CtrlTunnelUpTimeTicksRepresents how long control tunnel is up. If the value is zero, then tunnel is not set up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.10.2.75.1.2.1.1.6 |
h3cDot11ACMtNotifyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.3 |
h3cDot11ACMtTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.3.0 |
h3cDot11ACMtTunnelSetupTrapThis notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.75.1.3.0.1 |
h3cDot11ACMtTunnelDownTrapThis notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.75.1.3.0.2 |
h3cDot11ACMtBackupSwtTrapThis trap is sent by AC when AC switches from master to slave or from slave to master. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.75.1.3.0.3 |
h3cDot11ACLoadBalanceTrapThis trap is sent by AC when load-balance is enabled on AC. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.75.1.3.0.4 |
h3cDot11ACStaFullTrapThis notification will be sent when STA is full on AC. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.75.1.3.0.5 |
h3cDot11ACStatusSwitchTrapThis notification will be sent when AC switchs from standby to active or from standby to active. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.75.1.3.0.6 |
h3cDot11ACMtTrapVarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.75.1.3.1 |
h3cDot11ACMtTrapTunlDwnInfoRepresents the reason for tunnel down. The following values are supported: tunnelTimeout(1), - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure(2), - rekey process is failed, tunnel will - be broken. apReset(3), - Administrator reset AP. apCrash(4), - AP reboot for system crash. apDeleted(5) - Delete AP from AC and trigger - tunnel down. apCfgChange(6) - The configuration for AP was changed.ro Enumeration .1.3.6.1.4.1.2011.10.2.75.1.3.1.1 |
h3cDot11ACMtTrapTunlUpInfoRepresents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC.ro Enumeration .1.3.6.1.4.1.2011.10.2.75.1.3.1.2 |
h3cDot11ACMtTrapBackupSwitchInfoRepresents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master.ro Enumeration .1.3.6.1.4.1.2011.10.2.75.1.3.1.3 |
h3cDot11ACMtTrapTnlAPNameRepresents name of the AP which sets up the tunnel with the AC.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.75.1.3.1.4 |
h3cDot11ACMtTrapTnlAPIPAddrRepresents IP address of the AP which sets up the tunnel with the AC.ro IpAddress .1.3.6.1.4.1.2011.10.2.75.1.3.1.5 |
h3cDot11LoadBalanceTypeRepresents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered.ro Enumeration .1.3.6.1.4.1.2011.10.2.75.1.3.1.6 |
h3cDot11LoadBalanceThresholdRepresents the value of load balance threshold.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.3.1.7 |
h3cDot11ACMtTrapAPIPv6AddrRepresents IPv6 address of the AP which sets up the tunnel with the AC.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.75.1.3.1.8 |
h3cDot11ACMtTrapTunlDwnCountReprsents how many times that the tunnel between AC and AP has down.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.3.1.9 |
h3cDot11ACMaxStaNumRepresents the max number of STA on AC.ro Integer32 .1.3.6.1.4.1.2011.10.2.75.1.3.1.10 |
h3cDot11ACMtTrapTnlAPSysNameRepresents system name of the AP which sets up the tunnel with the AC.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.75.1.3.1.11 |
h3cDot11ACMtFirstTrapTimeRepresents the first trap time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.10.2.75.1.3.1.12 |
h3cDot11ACStatusSwitchInfoRepresents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active.ro Enumeration .1.3.6.1.4.1.2011.10.2.75.1.3.1.13 |
h3cDot11SourceACNmsIPRepresents the NMS IP address of master AC.ro IpAddress .1.3.6.1.4.1.2011.10.2.75.1.3.1.14 |