H3C-DISK-MIB
Imported Objects
Objects
18 total| Object Name |
|---|
h3cDiskThis MIB describes the general information of disk device, include the running status, disk interface, and chche management. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.10.3 |
h3cDiskMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.10.3.1 |
h3cDiskTableThis table contains some entity extend information of the disk. SEQUENCE OF H3cDiskEntry .1.3.6.1.4.1.2011.10.10.3.1.1 |
h3cDiskEntryAn entry containing management information applicable to the disk. H3cDiskEntry .1.3.6.1.4.1.2011.10.10.3.1.1.1 |
h3cDiskIndexThis object identifies the entity index of disk. The object identified by this index is the same object as identified by the same value of entPhysicalIndex. Integer32 .1.3.6.1.4.1.2011.10.10.3.1.1.1.1 |
h3cDiskPortTypeThis object describes the interface type of disk. The value 'sata' means serial advanced technology attachment. The value 'pata' means parallel advanced technology attachment. The value 'sas' means serial attached SCSI. The value 'scsi' means small computer system interface. The value 'ieee1394' means a type of bus standard. The value 'fcal' means fiber channel arbitrated loop.ro Enumeration .1.3.6.1.4.1.2011.10.10.3.1.1.1.2 |
h3cDiskPortSpeedThis object identifies the speed of disk interface. The units is million bytes per second.ro Integer32 UNITS "MB/second" .1.3.6.1.4.1.2011.10.10.3.1.1.1.3 |
h3cDiskSizeThis object describes the size of disk's total space. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.3.1.1.1.4 |
h3cDiskFreeSpaceThis object describes the size of spare space of the disk. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.3.1.1.1.5 |
h3cDiskLocationStateThis object identifies if the led used to confirm the position of disk is enable.rw H3cStorageEnableState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.3.1.1.1.6 |
h3cDiskRunLedStateThis object identifies the runing state of the disk. The value of 'on' means the blue led is on, and the disk works well. The value of 'blink' means the blue led is blinking, and the disk is being readed or writed. The value of 'fastblink' means the blue led is blinking very fast, and the disk is being located. This object can not be 'fastblink' when the value of associated h3cDiskLocationState object is equal to 'disable'.ro Enumeration .1.3.6.1.4.1.2011.10.10.3.1.1.1.7 |
h3cDiskFaultLedStateThis object identifies the fault state of the disk. The value of 'off' means the yellow led is go out, and the disk works well. The value of 'on' means the yellow led is on, and the disk break down. The value of 'blink' means the yellow led is blinking, and a group of raid disk is being synchronized.ro Enumeration .1.3.6.1.4.1.2011.10.10.3.1.1.1.8 |
h3cDiskInitializeThe operation of initialize the disk. When the value of this object is set to 'action', the operation of disk initialize are touched off.rw H3cStorageActionType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.3.1.1.1.9 |
h3cDiskGlobalSpareThis object identifies if the disk is a global hot spare disk. The value 'globalSpare' means it is a global spare disk, and the value 'nonglobalSpare' means not.rw Enumeration .1.3.6.1.4.1.2011.10.10.3.1.1.1.10 |
h3cDiskLocalSpareThis object identifies if the disk is a specific hot spare disk. The value 'localSpare' means it is a local spare disk, and 'nonlocalSpare' means not.ro Enumeration .1.3.6.1.4.1.2011.10.10.3.1.1.1.11 |
h3cDiskReadCacheThis object identifies the state of read cache.rw H3cStorageEnableState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.3.1.1.1.12 |
h3cDiskWriteCacheThis object identifies the state of write cache.rw H3cStorageEnableState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.3.1.1.1.13 |
h3cDiskPowerOffReasonThis object describes the reason of disk poweroff. The value 'environmentUnstable' means disk poweroff and may poweron again. The value 'mediumError' means disk poweroff and never poweron. The value 'smartCheckError' means disk's SMART check failed and poweroff. The value 'generalError' means disk poweroff because of general error.ro Enumeration .1.3.6.1.4.1.2011.10.10.3.1.1.1.14 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.