H3C-DHCPRELAY-MIB
AI MIB Summary
The H3C-DHCPRELAY-MIB module monitors and manages Dynamic Host Configuration Protocol (DHCP) relay agent operations on H3C and legacy Huawei-3Com network devices, exposing critical metrics such as relay agent interface statistics, DHCP message forwarding counters, binding table entries, and relay agent state transitions.
HUAWEI-3COM DHCPR MIB
Main OID:
h3cDhcpRelay.1.3.6.1.4.1.2011.10.2.58
51
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
h3cDhcpRelayHUAWEI-3COM DHCPR MIB MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.58 |
h3cDHCPRMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.58.1 |
h3cDHCPRIfSelectTableA table for configuring relay mode
for interfaces. SEQUENCE OF H3cDHCPRIfSelectEntry .1.3.6.1.4.1.2011.10.2.58.1.1 |
h3cDHCPRIfSelectEntryAn entry for configuring relay mode for an
interface. H3cDHCPRIfSelectEntry .1.3.6.1.4.1.2011.10.2.58.1.1.1 |
h3cDHCPRIfSelectRelayModeIf the value is on, the DHCP relay function
would be enabled on this interface.rw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.1.1.1 |
h3cDHCPRIpToGroupTableA table for configuring ip addresses for DHCP
server groups. SEQUENCE OF H3cDHCPRIpToGroupEntry .1.3.6.1.4.1.2011.10.2.58.1.2 |
h3cDHCPRIpToGroupEntryAn entry for configuring ip addresses for a DHCP
server group. H3cDHCPRIpToGroupEntry .1.3.6.1.4.1.2011.10.2.58.1.2.1 |
h3cDHCPRIpToGroupGroupIdGroup identifier of DHCP server group. Integer32 .1.3.6.1.4.1.2011.10.2.58.1.2.1.1 |
h3cDHCPRIpToGroupServerIpTypeIp address type of DHCP server. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.58.1.2.1.2 |
h3cDHCPRIpToGroupServerIpIp address of DHCP server. InetAddress .1.3.6.1.4.1.2011.10.2.58.1.2.1.3 |
h3cDHCPRIpToGroupRowStatusOperation status of this table entry.
Three actions are used: active,
createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.58.1.2.1.4 |
h3cDHCPRIfToGroupTableA table for configuring DHCP server groups
for interfaces. SEQUENCE OF H3cDHCPRIfToGroupEntry .1.3.6.1.4.1.2011.10.2.58.1.3 |
h3cDHCPRIfToGroupEntryAn entry for configuring DHCP server group for
an interface. H3cDHCPRIfToGroupEntry .1.3.6.1.4.1.2011.10.2.58.1.3.1 |
h3cDHCPRIfToGroupGroupIdThe DHCP server group for this interface.rw Integer32 .1.3.6.1.4.1.2011.10.2.58.1.3.1.1 |
h3cDHCPRIfToGroupRowStatusOperation status of this table entry.
Three actions are used: active,
createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.58.1.3.1.2 |
h3cDHCPRAddrCheckTableA table containing the states of dhcp security address
check switchs for interfaces. SEQUENCE OF H3cDHCPRAddrCheckEntry .1.3.6.1.4.1.2011.10.2.58.1.4 |
h3cDHCPRAddrCheckEntryAn entry containing the state of dhcp security address
check switch for an interface. H3cDHCPRAddrCheckEntry .1.3.6.1.4.1.2011.10.2.58.1.4.1 |
h3cDHCPRAddrCheckSwitchThe state of dhcp security address check switch for
this interface.
It has two defined values: enabled and disabled.
If the value is enabled, the address check function
would be enabled. The default value is disabled.rw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.4.1.1 |
h3cDHCPRSecurityTableA table containing the information of
DHCP security. SEQUENCE OF H3cDHCPRSecurityEntry .1.3.6.1.4.1.2011.10.2.58.1.5 |
h3cDHCPRSecurityEntryAn entry containing the information of
DHCP security. H3cDHCPRSecurityEntry .1.3.6.1.4.1.2011.10.2.58.1.5.1 |
h3cDHCPRSecurityClientIpAddrTypeDHCP client's net ip address type InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.58.1.5.1.1 |
h3cDHCPRSecurityClientIpAddrDHCP client's net ip address InetAddress .1.3.6.1.4.1.2011.10.2.58.1.5.1.2 |
h3cDHCPRSecurityClientMacAddrDHCP client's mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.58.1.5.1.3 |
h3cDHCPRSecurityClientPropertyProperty of client addressrw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.5.1.4 |
h3cDHCPRSecurityClientRowStatusOperation status of this table entry.
Three actions are used: active,
createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.58.1.5.1.5 |
h3cDHCPRStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.58.1.6 |
h3cDHCPRRxClientPktNumThe total number of the packets received from DHCP
clients by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.1 |
h3cDHCPRTxClientPktNumThe total number of the brodcast packets transmitted
to DHCP clients by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.2 |
h3cDHCPRRxServerPktNumThe total number of the packets received from
DHCP Servers by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.3 |
h3cDHCPRTxServerPktNumThe total number of the packets transmitted to
DHCP Servers by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.4 |
h3cDHCPRDiscoverPktNumThe total number of the DHCP Discover packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.5 |
h3cDHCPRRequestPktNumThe total number of the DHCP Request packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.6 |
h3cDHCPRDeclinePktNumThe total number of the DHCP Decline packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.7 |
h3cDHCPRReleasePktNumThe total number of the DHCP Release packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.8 |
h3cDHCPRInformPktNumThe total number of the DHCP Inform packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.9 |
h3cDHCPROfferPktNumThe total number of the DHCP Offer packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.10 |
h3cDHCPRAckPktNumThe total number of the DHCP Ack packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.11 |
h3cDHCPRNakPktNumThe total number of the DHCP Nak packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.58.1.6.12 |
h3cDHCPRStatisticsResetThis node only supports set operation.
If the value is true,it will clear all of the packet
statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.58.1.6.13 |
h3cDHCPRCycleGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.58.1.7 |
h3cDHCPRCycleStatusIf the value is on, the cycle function
would be enabled.rw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.7.1 |
h3cDHCPRConfigOption82Group OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.58.1.8 |
h3cDHCPROption82SwitchIf the value is enabled,
DHCP relay supporting option 82 function
would be enabled.rw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.8.1 |
h3cDHCPROption82HandleStrategyThe strategies of DHCP relay handling option 82.
'drop' indicates DHCP relay discarding the request
packet including option 82.
'keep' indicates DHCP relay accepting the request
packet without any change of the option 82.
'replace' indicates DHCP relay accepting the
request packet on condition that it generates a new
option 82 to replace the original one.rw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.8.2 |
h3cDHCPRConfigOption82IfTableA table containing the information of DHCP
option 82.
This table depends on h3cDHCPRIfToGroupTable.
An entry of this table will be created when
an entry of h3cDHCPRIfToGroupTable is created. SEQUENCE OF H3cDHCPRConfigOption82IfEntry .1.3.6.1.4.1.2011.10.2.58.1.8.3 |
h3cDHCPRConfigOption82IfEntryAn entry containing the information of
DHCP option 82. H3cDHCPRConfigOption82IfEntry .1.3.6.1.4.1.2011.10.2.58.1.8.3.1 |
h3cDHCPROption82IfSwitchIf DHCP relay supports option 82 functions, the
value is 'enabled'.
If DHCP relay does not support option 82 functions,
the value is 'disabled'.rw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.8.3.1.1 |
h3cDHCPROption82IfStrategyThe strategies of DHCP relay handling option 82.
'drop' indicates DHCP relay discarding the request
packet including option 82.
'keep' indicates DHCP relay accepting the request
packet without any change of the option 82.
'replace' indicates DHCP relay accepting the
request packet on condition that it generates a new
option 82 to replace the original one.rw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.8.3.1.2 |
h3cDHCPROption82IfFormatThe format of DHCP relay option 82.
'normal' is the standard format.
'verbose' is the detailed format.rw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.8.3.1.3 |
h3cDHCPROption82IfNodeTypeProperty of DHCP relay option 82 verbose format.
The value can be set by user only when the value
of h3cDHCPROption82IfFormat is set with 'verbose'.
If the value of h3cDHCPROption82IfFormat is
'normal', the value is automatically set with
'invalid'. the value can not be set with 'invalid'
by user.
'mac' indicates the option 82 verbose format is
filled in with the mac of DHCP relay input
interface. If the value of h3cDHCPROption82IfFormat
is set with 'verbose', the value is automatically
set with 'mac'.
'sysname' indicates the option 82 verbose format
is filled in with the name of the DHCP relay.
'userdefine' indicates the option 82 verbose format
is filled in with the string defined by user.
If the value is set with 'userdefine', the value of
h3cDHCPROption82IfUsrDefString must be set
simultaneously.rw Enumeration .1.3.6.1.4.1.2011.10.2.58.1.8.3.1.4 |
h3cDHCPROption82IfUsrDefStringThe string defined by user to fill in the
option 82 verbose format. If the value of
h3cDHCPROption82IfFormat is 'normal', or the
value of h3cDHCPROption82IfNodeType is 'mac'
or 'sysname', it is set with a null string
automatically and can not be modified by user.
It must be set with a non-zero length string
when the value of h3cDHCPROption82IfNodeType
is set with 'userdefine'.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.58.1.8.3.1.5 |