H3C-ATM-DXI-MIB
AI MIB Summary
The H3C-ATM-DXI-MIB module enables remote configuration and monitoring of H3C ATM-DXI (Digital Cross-Connect Interface) hardware, specifically managing the physical layer parameters and logical channel configurations required for T1/E1-based ATM transport over digital cross-connect systems.
This MIB contains objects to manage configuration of ATM-DXI. There are no constraints on this MIB.
Main OID:
h3cAtmDxi.1.3.6.1.4.1.2011.10.2.49
25
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
h3cAtmDxiThis MIB contains objects to manage configuration of ATM-DXI.
There are no constraints on this MIB. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.49 |
h3cAtmDxiScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.1 |
h3cAtmDxiConfModeThis node identifies the ATM-DXI mode being
used at the ATM-DXI port.ro Enumeration .1.3.6.1.4.1.2011.10.2.49.1.1 |
h3cAtmDxiIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.2 |
h3cAtmDxiPvcTableThis table describes information of PVC in ATM-DXI interface. SEQUENCE OF H3cAtmDxiPvcEntry .1.3.6.1.4.1.2011.10.2.49.2.1 |
h3cAtmDxiPvcEntryThe entry of h3cAtmDxiPvcTable. H3cAtmDxiPvcEntry .1.3.6.1.4.1.2011.10.2.49.2.1.1 |
h3cAtmDxiPvcVpiThe value of VPI. It can't be 0 if h3cAtmDxiPvcVci is 0. Integer32 .1.3.6.1.4.1.2011.10.2.49.2.1.1.1 |
h3cAtmDxiPvcVciThe value of VCI. It can't be 0 if h3cAtmDxiPvcVpi is 0. Integer32 .1.3.6.1.4.1.2011.10.2.49.2.1.1.2 |
h3cAtmDxiPvcDFAThe index of PVC. It is equal with vci and VPI. And this node value
is correlate with h3cAtmDxiPvcVpi and h3cAtmDxiPvcVci.rw Integer32 .1.3.6.1.4.1.2011.10.2.49.2.1.1.3 |
h3cAtmDxiPvcEncTypeEncapsulation type of the frame.rw Enumeration .1.3.6.1.4.1.2011.10.2.49.2.1.1.4 |
h3cAtmDxiPvcMapCountThe number of map. One map can only associate with one PVC, but
one PVC can associate with 32 maps. This node is the map count
which one PVC associated with.rw Integer32 .1.3.6.1.4.1.2011.10.2.49.2.1.1.5 |
h3cAtmDxiPvcRowStatusOnly support 'destroy' 'createAndGo' and 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.49.2.1.1.6 |
h3cAtmDxiMapTableThis table describes PVC map information. SEQUENCE OF H3cAtmDxiMapEntry .1.3.6.1.4.1.2011.10.2.49.2.2 |
h3cAtmDxiMapEntryThe entry of h3cAtmDxiMapTable. H3cAtmDxiMapEntry .1.3.6.1.4.1.2011.10.2.49.2.2.1 |
h3cAtmDxiMapPeerIpTypeThe type of ip address: IPv4 or IPv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.49.2.2.1.1 |
h3cAtmDxiMapPeerIpThe peer ip address. This ip address is the peer ip
address which the frame will arrive. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.49.2.2.1.2 |
h3cAtmDxiMapPvcVpiThe VPI of PVC. It can't be 0 if h3cAtmDxiMapPvcVci is 0. Integer32 .1.3.6.1.4.1.2011.10.2.49.2.2.1.3 |
h3cAtmDxiMapPvcVciThe VCI of PVC. It can't be 0 if h3cAtmDxiMapPvcVpi is 0. Integer32 .1.3.6.1.4.1.2011.10.2.49.2.2.1.4 |
h3cAtmDxiMapTypePvc map type. Enumeration .1.3.6.1.4.1.2011.10.2.49.2.2.1.5 |
h3cAtmDxiMapInarpTimeThe interval time of inarp request. This node describes
the interval time inarp request frame sent. If the h3cAtmDxiMapType
isn't inarp, this value is 0. Its unit is minute.rw Integer32 (0 | 5..10) .1.3.6.1.4.1.2011.10.2.49.2.2.1.6 |
h3cAtmDxiMapBroEnableWhether ATM-DXI map enable broadcast or not.rw Enumeration .1.3.6.1.4.1.2011.10.2.49.2.2.1.7 |
h3cAtmDxiMapRowStatusOnly support 'destroy', 'createAndGo' and 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.49.2.2.1.8 |
h3cAtmDxiConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.3 |
h3cAtmDxiCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.3.1 |
h3cAtmDxiGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.3.2 |