H3C-AAL5-MIB
AI MIB Summary
The H3C-AAL5-MIB module enables monitoring of Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) specific performance counters and error statistics on H3C network devices, capturing metrics such as cell loss, cell delay, and protocol error rates that fall outside the scope of standard RFC 1695 definitions.
This MIB file provides AAL5 specific information that are excluded by RFC 1695
Main OID:
h3cAAL5MIB.1.3.6.1.4.1.2011.10.2.21.1
16
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
h3cAAL5MIBThis MIB file provides AAL5 specific information
that are excluded by RFC 1695 MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.21.1 |
h3cAal5MIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.21.1.0 |
h3cAal5VccStateChangeThe status of AAL5 VCC. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.21.1.0.1 |
h3cAal5MIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.21.1.1 |
h3cAal5VccTableThis table extends AAL5 VCC performance
parameters which definded in aal5VccEntry of RFC1695. SEQUENCE OF H3CAal5VccEntry .1.3.6.1.4.1.2011.10.2.21.1.1.1 |
h3cAal5VccEntryThis list contains the additional AAL5 VCC performance
parameters which are not definded in aal5VccEntry
of RFC1695. H3CAal5VccEntry .1.3.6.1.4.1.2011.10.2.21.1.1.1.1 |
h3cAal5VccVpiThe VPI value of the AAL5 VCC. Integer32 .1.3.6.1.4.1.2011.10.2.21.1.1.1.1.1 |
h3cAal5VccVciThe VCI value of the AAL5 VCC. Integer32 .1.3.6.1.4.1.2011.10.2.21.1.1.1.1.2 |
h3cAal5VccInPktsThe number of AAL5 CPCS PDUs received.ro Counter32 .1.3.6.1.4.1.2011.10.2.21.1.1.1.1.3 |
h3cAal5VccOutPktsThe number of AAL5 CPCS PDUs transmitted.ro Counter32 .1.3.6.1.4.1.2011.10.2.21.1.1.1.1.4 |
h3cAal5VccInOctetsThe number of AAL5 CPCS PDU octets received.ro Counter32 .1.3.6.1.4.1.2011.10.2.21.1.1.1.1.5 |
h3cAal5VccOutOctetsThe number of AAL5 CPCS PDU octets transmitted.ro Counter32 .1.3.6.1.4.1.2011.10.2.21.1.1.1.1.6 |
h3cAal5VccStateIndicates whether the particular virtual circuit is
operational. 'Active' indicates the particular virtual
circuit is operational. 'Inactive' indicates the circuit
is temporarily disabled. 'Invalid' indicates the circuit
is deletedro Enumeration .1.3.6.1.4.1.2011.10.2.21.1.1.1.1.7 |
h3cAal5MIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.21.1.3 |
h3cAal5MIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.21.1.3.1 |
h3cAal5MIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.21.1.3.2 |