GDCUAS7626-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for GDCUAS7626-MIB.
92
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
92 total| Object Name |
|---|
gdc OBJECT IDENTIFIER .1.3.6.1.4.1.498 |
RFC1155-SMI Unknown .1.3.6.1.4.1.498 |
bql2 OBJECT IDENTIFIER .1.3.6.1.4.1.498.12 |
uas7626 OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12 |
uas7626Version OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.1 |
uas7626MIBversionIdentifies the version of the MIB. The format of the version
is x.yzT, where 'x' identifies the major revision number, 'y'
identifies the minor revision number, 'z' identifies the
typographical revision, and T identifies the test revision.
Acceptable values for the individual revision components are
as follows:
x: 1 - 9
y: 0 - 9
z: 0 - 9
T: A - Z
Upon formal release, no designation for the test revision will
be present.ro Unknown .1.3.6.1.4.1.498.12.12.1.1 |
uas7626VersionTableThe 7626 version table SEQUENCE OF Uas7626VersionEntry .1.3.6.1.4.1.498.12.12.1.2 |
uas7626VersionEntryAn entry in the GDC uas7626System Version Table. Uas7626VersionEntry .1.3.6.1.4.1.498.12.12.1.2.1 |
uas7626VersionIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.1.2.1.1 |
uas7626ActiveFirmwareRevThe version number of the firmware currently executing.
The format is MM.NN.BB where:
MM: Major Revision (0-99)
NN: Minor Revision (0-99)
BB: Bug Fix Revision (0-99)
Valid [i]nterface = 0ro DisplayString .1.3.6.1.4.1.498.12.12.1.2.1.2 |
uas7626StoredFirmwareRevThe version number of the firmware stored (in a compressed format)
but not currently executing.
MM: Major Revision (0-99)
NN: Minor Revision (0-99)
BB: Bug Fix Revision (0-99)
Valid [i]nterface = 0ro DisplayString .1.3.6.1.4.1.498.12.12.1.2.1.3 |
uas7626StoredFirmwareStatusThis object represents the state of the Non-Active or Stored firmware:
statBlank(1) Factory Default
statDownLoading(2) In process of downloading firmware
statOK(3) Zipped version checksum succesful (OK to switch)
(can set uas7626SwitchActiveFirmware to
switchActive(2))
statCheckSumBad(4) Failed checksum after download
statUnZipping(5) In process of uncompressing into active area
statBadUnZip(6) Failed last uncompress
statDownloadAborted(7) Download aborted by user
Valid [i]nterface = 0ro Enumeration .1.3.6.1.4.1.498.12.12.1.2.1.4 |
uas7626SwitchActiveFirmwareThis object is used to switch the active executing firmware from
the version in uas7626ActiveFirmwareRev to the version in
uas7626StoredFirmwareRev.
When a switchActive(2) is set (write only) the element will:
1) reboot
2) uncompress stored code into active area
3) perform checksum on active area
4) Set uas7626StoredStatus object to indicate results
5) If succesfull:
update uas7626ActiveFirmwareRev and uas7626StoredFirmwareRev
and begin executing
If failed:
replace active area with previous revision
The switchNorm(1) enumeration will always be read.
Setting switchActive(2) when the uas7626StoredFirmwareStatus is
not statOK(3) will result in an error.
Valid [i]nterface = 0rw Enumeration .1.3.6.1.4.1.498.12.12.1.2.1.5 |
uas7626DownloadingModeThis object is used to configure the download mode:
disableAll(1) Prevents any firmware downloading to UAS7626
enableAndWait(2) Allows downloading zipped code to be stored only!
enableAndSwitch(3) Allows downloading and then unzips and begins executing
the new code
Valid [i]nterface = 0rw Enumeration .1.3.6.1.4.1.498.12.12.1.2.1.6 |
uas7626Maintenance OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.2 |
uas7626MaintenanceTableThe table describes the maintenance objects for uas7626. SEQUENCE OF Uas7626MaintenanceEntry .1.3.6.1.4.1.498.12.12.2.1 |
uas7626MaintenanceEntryAn entry in the GDC 7626 Maintenance Table. Uas7626MaintenanceEntry .1.3.6.1.4.1.498.12.12.2.1.1 |
uas7626MaintenanceLineIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.2.1.1.1 |
uas7626SoftResetSupports the action of soft resetting the unit.
When this object is set to reset(2), then the unit
performs a soft reset, whose meaning is specific to
the type of unit being managed. The value of norm(1)
will be returned when the reset is complete.
The value of norm(1) can not be set by management.
Valid [i]nterface = 0rw Enumeration .1.3.6.1.4.1.498.12.12.2.1.1.2 |
uas7626DefaultInitThis is used to allow the NonVolatile Configuration to
be set to a factory default state. When this value is set
to factoryDefault(2) the unit will perform a reset to make
the default configuration take affect.
The value of normal(1) will be returned when the
initialization is complete.
The value of normal(1) can not be set by management.
Valid [i]nterface = 0rw Enumeration .1.3.6.1.4.1.498.12.12.2.1.1.3 |
uas7626ResetMajorAlarmThis variable is used to reset the Major BER alarm.
A value of norm(1) cannot be set by management and
will always be returned on a read.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.2.1.1.4 |
uas7626ResetMinorAlarmThis variable is used to reset the Minor BER alarm.
A value of norm(1) cannot be set by management and
will always be returned on a read.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.2.1.1.5 |
uas7626ResetStatisticsThis variable is used to reset the performance intervals.
When it is set to reset, the performance tables and uas7626Valid
intervals are reset to zero. The value of norm(1) can not be set
by management.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.2.1.1.6 |
uas7626ValidIntervalsThe number of previous intervals for which
valid data was collected. The value will be 16
unless the interface was brought on-line within
the last 4 hours, in which case the value will
be the number of complete 15 minute intervals
the since interface has been online.
Valid [i]nterface = 01-06ro INTEGER .1.3.6.1.4.1.498.12.12.2.1.1.7 |
uas7626SysUpTimeThis variable is used to report the elapsed system tick
time for conversion to real time at the controller and is
not related to the sysUpTime referenced in MIB-II.
Upon power-up of the unit, the elapsed time is cleared.
The elapsed time counter rolls over upon reaching the
maximum count.
Valid [i]nterface = 0ro INTEGER .1.3.6.1.4.1.498.12.12.2.1.1.8 |
uas7626LedStatusReturns a bitwise snapshot of the front panel LED state:
key
001 = SOLID GREEN
010 = SOLID RED
011 = FLASHING RED
100 = FLASHING GREEN
1.7 - n/a
1.6 - \
1.5 -
1.4 - /
1.3 - \
1.2 -
1.1 - /
1.0 - f/u
2.7 - f/u
2.6 - \
2.5 -
2.4 - /
2.3 - \
2.2 -
2.1 - /
2.0 - f/u
3.7 - f/u
3.6 - \
3.5 -
3.4 - /
3.3 - \
3.2 -
3.1 - /
3.0 - f/u
4.7 - f/u
4.6 - f/u
4.5 - f/u
4.4 - Alarm (0 = Off; 1 = Alarm Active )
4.3 - Test Mode (0 = Off; 1 = Alarm Active )
4.2 - In Service (0 = Off; 1 = Alarm Active )
4.1 - Transmitter Timing Failure (0 = Off; 1 = Alarm Active )
4.0 - Management Response (0 = Off; 1 = Alarm Active )
Valid [i]nterface = 0ro OCTET STRING .1.3.6.1.4.1.498.12.12.2.1.1.9 |
uas7626AlarmStatusReturns actual bit-wise Status of alarms
regardless of whether the alarm is masked
or not.
key
0 = Inactive
1 = Active
1.7 - f/u
1.6 - Power-up
1.5 - f/u
1.4 - f/u
1.3 - f/u
1.2 - f/u
1.1 - f/u
1.0 - f/u
Note: n=2-6 for octets 2-7
n.7 - f/u
n.6 - Loop n Major
n.5 - Loop n Minor
n.4 - Loop n Loss of Transmit Clock
n.3 - Loop n 2B1Q Out of Sync
n.2 - Loop n Sealing Current Non-Continuity Alarm
n.1 - Loop n Errored Seconds
n.0 - Loop n Unavailable Seconds
Valid [i]nterface = 0ro OCTET STRING .1.3.6.1.4.1.498.12.12.2.1.1.10 |
uas7626StatLastInitializedThe elapsed time since the statistics were last initialized.
This will be zero'd when uas7626ResetStatistics is reset(2).
Valid [i]nterface = 01-06ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.498.12.12.2.1.1.11 |
uas7626CircuitIDName to identify the circuit.
Valid [i]nterface = 01-06rw DisplayString .1.3.6.1.4.1.498.12.12.2.1.1.12 |
uas7626Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.3 |
uas7626ConfigTableThe GDC Configuration table. SEQUENCE OF Uas7626ConfigEntry .1.3.6.1.4.1.498.12.12.3.1 |
uas7626ConfigEntryThe GDC Configuration table entry. Uas7626ConfigEntry .1.3.6.1.4.1.498.12.12.3.1.1 |
uas7626ConfigIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.3.1.1.1 |
uas7626DataRateObject to select the Data Rate on Loop n.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.3.1.1.2 |
uas7626HighwayObject to select the data highway for Loop n.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.3.1.1.3 |
uas7626TimeSlotObject to select the timeslots for the data highway given by
uas7624Highway for loop n. Valid selections are 1-31 and 64.
A value of 64 indicates the loop is not assigned to a highway.
Valid [i]nterface = 01-06rw INTEGER .1.3.6.1.4.1.498.12.12.3.1.1.4 |
uas7626Diagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.4 |
uas7626DiagTableThe GDC 7626 Diagnostics table. Information in the entries of
this table support diagnostics testing, both active testing
via patterns, and passive testing via loopbacks. SEQUENCE OF Uas7626DiagEntry .1.3.6.1.4.1.498.12.12.4.1 |
uas7626DiagEntryThe GDC 7626 Diagnostics table entry. Uas7626DiagEntry .1.3.6.1.4.1.498.12.12.4.1.1 |
uas7626DiagIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.4.1.1.1 |
uas7626TestSelectionSelects the test to run. A selection of
stopTest(1) stops the current test.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.4.1.1.2 |
uas7626TestResultsReturns the self test bit error count.
Valid [i]nterface = 01-06ro INTEGER .1.3.6.1.4.1.498.12.12.4.1.1.3 |
uas7626ResetTestResultsResets the self test bit error count.
A value of norm(1) cannot be set by management
and is always returned on a read.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.4.1.1.4 |
uas7626Performance OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.5 |
uas7626CurrentTableThe uas7626 Current table contains various statistics being
collected for the current 15 minute interval. SEQUENCE OF Uas7626CurrentEntry .1.3.6.1.4.1.498.12.12.5.3 |
uas7626CurrentEntryAn entry in the uas7626 Current table. Uas7626CurrentEntry .1.3.6.1.4.1.498.12.12.5.3.1 |
uas7626CurrentIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.5.3.1.1 |
uas7626CurrentStatReturns a bitwise snapshot of the current 15 minute
statistics:
Octet 1 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Loop ID
Octet 2 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 3 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Errored Seconds
Octet 4 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 5 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Severely Errored Seconds
Octet 6 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 7 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Unavailable Seconds
Octet 8 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^16
bit 1 - 2^15
bit 0 - 2^14
Octet 9 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 10 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 FEBE (Far End Block Error Count)
Valid [i]nterface = 01-06ro OCTET STRING .1.3.6.1.4.1.498.12.12.5.3.1.2 |
uas7626IntervalTableThe uas7626 Interval table contains various statistics
collected by each Interface over the last 16 15-minute
intervals. SEQUENCE OF Uas7626IntervalEntry .1.3.6.1.4.1.498.12.12.5.4 |
uas7626IntervalEntryAn entry in the Interval table. Uas7626IntervalEntry .1.3.6.1.4.1.498.12.12.5.4.1 |
uas7626IntervalIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.5.4.1.1 |
uas7626IntervalNumberThe interval number 1- 16.
Valid [i]nterface = 01-06ro INTEGER .1.3.6.1.4.1.498.12.12.5.4.1.2 |
uas7626IntervalStatReturns a bitwise snapshot of the interval statistics.
Octet 1 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Loop ID
Octet 2 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Interval
Octet 3 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 4 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Errored Seconds
Octet 5 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 6 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Severely Errored Seconds
Octet 7 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 8 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Unavailable Seconds
Octet 9 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^16
bit 1 - 2^15
bit 0 - 2^14
Octet 10 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 11 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 FEBE (Far End Block Error Count)
Valid [i]nterface = 01-06ro OCTET STRING .1.3.6.1.4.1.498.12.12.5.4.1.3 |
uas7626TotalTableThe uas7626 Total Table contains the totals of the various
statistics collected for the current 24 hour period
for each interface. SEQUENCE OF Uas7626TotalEntry .1.3.6.1.4.1.498.12.12.5.5 |
uas7626TotalEntryAn entry in the uas7626 Total table. Uas7626TotalEntry .1.3.6.1.4.1.498.12.12.5.5.1 |
uas7626TotalIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.5.5.1.1 |
uas7626TotalStatReturns a bitwise snapshot of the current 24 hour statistics.
Octet 1 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Loop ID
Octet 2 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - >65535
bit 1 - 2^15
bit 0 - 2^14
Octet 3 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 4 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Errored Seconds
Octet 5 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - >65535
bit 1 - 2^15
bit 0 - 2^14
Octet 6 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 7 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Severely Errored Seconds
Octet 8 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - >65535
bit 1 - 2^15
bit 0 - 2^14
Octet 9 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 10 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Unavailable Seconds
Octet 11 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^23
bit 1 - 2^22
bit 0 - 2^21
Octet 12 bit 7 - not used
bit 6 - 2^20
bit 5 - 2^19
bit 4 - 2^18
bit 3 - 2^17
bit 2 - 2^16
bit 1 - 2^15
bit 0 - 2^14
Octet 13 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 14 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 FEBE (Far End Block Error Count)
Valid [i]nterface = 01-06ro OCTET STRING .1.3.6.1.4.1.498.12.12.5.5.1.2 |
uas7626Recent24HrTableThe Recent 24 Hour table contains the totals of the various
statistics collected for the previous 24 hour period
for each interface. SEQUENCE OF Uas7626Recent24HrEntry .1.3.6.1.4.1.498.12.12.5.6 |
uas7626Recent24HrEntryAn entry in the Recent24Hr table. Uas7626Recent24HrEntry .1.3.6.1.4.1.498.12.12.5.6.1 |
uas7626Recent24HrIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.5.6.1.1 |
uas7626Recent24HrStatReturns a bitwise snapshot of the recent 24 hour statistics.
Octet 1 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Loop ID
Octet 2 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - >65535
bit 1 - 2^15
bit 0 - 2^14
Octet 3 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 4 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Errored Seconds
Octet 5 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - >65535
bit 1 - 2^15
bit 0 - 2^14
Octet 6 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 7 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Severely Errored Seconds
Octet 8 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - >65535
bit 1 - 2^15
bit 0 - 2^14
Octet 9 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 10 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 Unavailable Seconds
Octet 11 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - 2^23
bit 1 - 2^22
bit 0 - 2^21
Octet 12 bit 7 - not used
bit 6 - 2^20
bit 5 - 2^19
bit 4 - 2^18
bit 3 - 2^17
bit 2 - 2^16
bit 1 - 2^15
bit 0 - 2^14
Octet 13 bit 7 - not used
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 14 bit 7 - not used
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0 FEBE (Far End Block Error Count)
Valid [i]nterface = 01-06ro OCTET STRING .1.3.6.1.4.1.498.12.12.5.6.1.2 |
uas7626UnavailableTimeRegTableThe 7626 Unavailable Time Register table. SEQUENCE OF Uas7626UnavailableTimeRegEntry .1.3.6.1.4.1.498.12.12.5.7 |
uas7626UnavailableTimeRegEntryAn entry in the Unavailable Time Register table. Uas7626UnavailableTimeRegEntry .1.3.6.1.4.1.498.12.12.5.7.1 |
uas7626UnavailableTimeRegIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.5.7.1.1 |
uas7626UnavailableTimeRegNumberA number between 1 and 6, where the number is the number of the
Unavailable Time Register.ro INTEGER .1.3.6.1.4.1.498.12.12.5.7.1.2 |
uas7626UnavailableTimeRegStartStart time of one of the Unavailable Time Registers.ro INTEGER .1.3.6.1.4.1.498.12.12.5.7.1.3 |
uas7626UnavailableTimeRegStopStop time of one of the Unavailable Time Registers.ro INTEGER .1.3.6.1.4.1.498.12.12.5.7.1.4 |
uas7626AlarmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.6 |
uas7626AlarmConfigTableThis table contains entries that configure Alarm reporting. SEQUENCE OF Uas7626AlarmConfigEntry .1.3.6.1.4.1.498.12.12.6.1 |
uas7626AlarmConfigEntryAn entry in the uas7626 Alarm Configuration table. Uas7626AlarmConfigEntry .1.3.6.1.4.1.498.12.12.6.1.1 |
uas7626AlarmConfigIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.6.1.1.1 |
uas7626AlarmConfigIdentifierformat: iso.org.dod.internet.private.enterprises.gdc.
bql2.uas7626.uas7626Alarms.ALM
example: 1.3.6.1.4.1.498.12.12.7.ALM
where ALM = 1 for uas7626NoResponse alarm, 2 for uas7626DiagRxErr alarm,
etc., as specified in the Alarm Definitions above.ro OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.6.1.1.2 |
uas7626AlarmCountThresholdThis function sets/reads the alarm threshold criteria.
This threshold is used along with the the alarm window to
determine the number of instances in a given time frame for
an alarm to occur before the alarm is considered active.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.6.1.1.3 |
uas7626LocalAlarmConfigTableThe uas7626LocalAlarmConfigTable contains entries
that configure alarm reporting to the alarm card. SEQUENCE OF Uas7626LocalAlarmConfigEntry .1.3.6.1.4.1.498.12.12.6.2 |
uas7626LocalAlarmConfigEntryAn entry in the GDC Local Alarm Configuration table. Uas7626LocalAlarmConfigEntry .1.3.6.1.4.1.498.12.12.6.2.1 |
uas7626LocalAlarmConfigIndexInteger value which uniquely identifies the UAS7626 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - loop or interface number (00-06)ro SCinstance .1.3.6.1.4.1.498.12.12.6.2.1.1 |
uas7626LossOfClockLocalDisables or enables the alarm on the Major buss or Minor Buss.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.6.2.1.2 |
uas7626ESLocalDisables or enables the alarm on the Major buss or Minor Buss.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.6.2.1.3 |
uas7626UASLocalDisables or enables the alarm on the Major buss or Minor Buss.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.6.2.1.4 |
uas7626OutofSyncLocalDisables or enables the alarm on the Major buss or Minor Buss.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.6.2.1.5 |
uas7626NoSealingCurrentLocalDisables or enables the alarm on the Major buss or Minor Buss.
Valid [i]nterface = 01-06rw Enumeration .1.3.6.1.4.1.498.12.12.6.2.1.6 |
uas7626Alarms OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7 |
uas7626NoResponseAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.1 |
uas7626DiagRxErrAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.2 |
uas7626PowerUpAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.3 |
uas7626LossofTransmitClockAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.4 |
uas7626OutofSyncAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.5 |
uas7626SealingCurrentNoContAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.6 |
uas7626UASAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.7 |
uas7626ESAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.8 |
uas7626MajorBERAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.9 |
uas7626MinorBERAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.12.12.7.10 |