GDCSC5K-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
37
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
gdc OBJECT IDENTIFIER .1.3.6.1.4.1.498 |
RFC1155-SMI Unknown .1.3.6.1.4.1.498 |
sc OBJECT IDENTIFIER .1.3.6.1.4.1.498.3 |
sc5000 OBJECT IDENTIFIER .1.3.6.1.4.1.498.3.2 |
gdcSc5000Version OBJECT IDENTIFIER .1.3.6.1.4.1.498.3.2.1 |
gdcSc5000MIBVersionThe version number of the MIB, to allow products to
know which MIB is being supported. The version number
will be x.yzT where x is a major revision (1-9), y is a minor
revision(0-9), z is a typo revision (0-9) and T indicates the
MIB is still a test revision(A-Z). When a release is complete
no T should exist.ro DisplayString .1.3.6.1.4.1.498.3.2.1.1 |
gdcSc5000Timing OBJECT IDENTIFIER .1.3.6.1.4.1.498.3.2.2 |
gdcSc5000TimingTableA table that contains information about the
source of shelf timing in the system.obsolete SEQUENCE OF GdcSc5000TimingEntry .1.3.6.1.4.1.498.3.2.2.1 |
gdcSc5000TimingEntryA list of information for each node in the system.obsolete GdcSc5000TimingEntry .1.3.6.1.4.1.498.3.2.2.1.1 |
gdcSc5000TimingIndexThe value indicates the node number for which this
entry contains management information. The gdcSc5000TimingIndex
is based off of the IFindex in MIB-II. The gdcSc5000TimingIndex
value is used to indicate the slot, line and drop of
the node in the SCM shelf that is being addressed.
The index is defined as: ssllddii.
where ss is from 1-32, ll is 1,dd is 0 and ii is 0.roobsolete SCinstance .1.3.6.1.4.1.498.3.2.2.1.1.1 |
gdcSc5000SrcShelfTimingIdentifies which unit or units are the source of shelf
timing defined as follows:
If one unit is defined as fourMegClk(2)
then only one other unit may be defined
as eightKiloClk(3) and the remaining units
must be defined as inhibit(1).
If one unit is defined as eightKiloClk(3)
then only one other unit may be defined as
fourMegClk(2) and the remaining units must
be defined as inhibit(1).
If one unit is defined as fourMegAnd8kClk(4)
then the remaining units must be defined
as inhibit(1).rwobsolete Enumeration .1.3.6.1.4.1.498.3.2.2.1.1.2 |
gdcSc5000Shelf OBJECT IDENTIFIER .1.3.6.1.4.1.498.3.2.3 |
sc5000ShelfNodeTypesEach octet contains the Node Type of the card occupying
the slot. Values are as follows:
empty 0
vf288 1
sc5001 2
sc5520 3
datx2011 4
sc700G2 6
sc700G3 7
sc616 12
sc702G2 15
sc5034 17
scdualV34 18
sc613 19
sc5553 20
sc611 21
sc710d2 23
sc700grRP 24
sc710d2RP 26
mp7002 29
uas7616 30
scm 31
sc521 32
sc5002 33ro OCTET STRING .1.3.6.1.4.1.498.3.2.3.1 |
sc5000ShelfAdminStatusEach octet xx contains the Admin Statuses of the Network
Elements(NEs) occupying slot xx. Each octet is
bitmapped as follows:
bit 7:\
bit 6: Admin Status of NE in slot xx, line 4
bit 5:\
bit 4: Admin Status of NE in slot xx, line 3
bit 3:\
bit 2: Admin Status of NE in slot xx, line 2
bit 1:\
bit 0: Admin Status of NE in slot xx, line 1
Values per pair of bits are:
01 Up
10 Down
00 No NE presentrw OCTET STRING .1.3.6.1.4.1.498.3.2.3.2 |
sc5000ShelfOperStatusEach octet xx contains the Operational Statuses of the Network
Elements(NEs) occupying slot xx. Each octet is
bitmapped as follows:
bit 7:\
bit 6: Oper Status of NE in slot xx, line 4
bit 5:\
bit 4: Oper Status of NE in slot xx, line 3
bit 3:\
bit 2: Oper Status of NE in slot xx, line 2
bit 1:\
bit 0: Oper Status of NE in slot xx, line 1
Values per pair of bits are:
01 Up
10 Down
00 No NE presentro OCTET STRING .1.3.6.1.4.1.498.3.2.3.3 |
sc5000ShelfClockProviderOctet 1 contains the slot number of the card providing the
4MHz clock.
Octet 2 contains the line number of the card providing the
4MHz clock.
Octet 3 contains the slot number of the card providing the
8kHz clock.
Octet 4 contains the line number of the card providing the
8kHz clock.
A value of 0 indicates that no card is providing the clock.rwobsolete OCTET STRING .1.3.6.1.4.1.498.3.2.3.4 |
sc5000ShelfLTUHwayAssgnOctet 1 contains the slot number of the LTU responsible for
Highway 1.
Octet 2 contains the slot number of the LTU responsible for
Highway 2.
Octet 3 contains the slot number of the LTU responsible for
Highway 3.
Octet 4 contains the slot number of the LTU responsible for
Highway 4.
If Highway x does not have an LTU then the value in Octet
x is 00.rw OCTET STRING .1.3.6.1.4.1.498.3.2.3.5 |
sc5000ShelfClockModeIndicates which LTU is supplying the clocks, LTU designated
as the primary or fallback. none(3) will only occur when the
SCM determines that neither of the cards assigned to be the
clock provider exists.ro Enumeration .1.3.6.1.4.1.498.3.2.3.6 |
sc5000ShelfClocksOctet 1 contains the slot number of the primary LTU
responsible for providing the shelf clock.
Octet 2 contains the line number of the primary LTU
responsible for providing the shelf clock.
Octet 3 contains the primary timing source. Values are
internal (1), network (2), external (3), cascade (4), and
station (5).
Octet 4 contains the slot number of the DSE responsible
for providing the external timing source to the primary LTU.
Octet 5 contains the line number of the DSE responsible
for providing the external timing source to the primary LTU.
Octet 6 contains the slot number of the fallback LTU
responsible for providing the shelf clock.
Octet 7 contains the line number of the fallback LTU
responsible for providing the shelf clock.
Octet 8 contains the fallback timing source. Values are
internal (1), network (2), cascade (4), and station (5).rw OCTET STRING .1.3.6.1.4.1.498.3.2.3.7 |
sc5000ShelfAutoClockRevertenable(1) indicates that the SCM will allow the primary
LTU to resume providing the system timing.rw Enumeration .1.3.6.1.4.1.498.3.2.3.8 |
sc5000ShelfRevertToPrimaryClkexecute(2) forces the primary LTU to resume providing
the system timing.rw Enumeration .1.3.6.1.4.1.498.3.2.3.9 |
gdcSc5000Highways OBJECT IDENTIFIER .1.3.6.1.4.1.498.3.2.4 |
sc5000HighwayTableA table that contains information about Highway and
Time Slot allocation. SEQUENCE OF Sc5000HighwayEntry .1.3.6.1.4.1.498.3.2.4.1 |
sc5000HighwayEntryA list of information for each highway. Sc5000HighwayEntry .1.3.6.1.4.1.498.3.2.4.1.1 |
sc5000HighwayNumberThe value indicates the highway to be configured.ro INTEGER .1.3.6.1.4.1.498.3.2.4.1.1.1 |
sc5000HighwayAllocationThere are 3 Octets per Time Slot.
Octets 1,2,3 are representative of Time Slot 1,
Octets 4,5,6 are representative of Time Slot 2, etc.
In each grouping, the first octet indicates the shelf slot
(1-32) to which the time slot has been assigned.
The second octet indicates the line (1-4) to which the time
slot has been assigned.
The third octet defines the allocation for the time slot. The
values are as follows:
1 = available
2 = not available
3 = Private Line (DSE Data)
4 = SN/Restoral (DBU data)
If a time slot has not been assigned then the grouping is
00:00:01rw OCTET STRING .1.3.6.1.4.1.498.3.2.4.1.1.2 |
gdcSc5000LTUConfig OBJECT IDENTIFIER .1.3.6.1.4.1.498.3.2.5 |
sc5000LTUConfigTableA table that contains information about the configuration
of the LTUs in the shelf. SEQUENCE OF Sc5000LTUConfigEntry .1.3.6.1.4.1.498.3.2.5.1 |
sc5000LTUConfigEntryA list of information for each LTU in the shelf. Sc5000LTUConfigEntry .1.3.6.1.4.1.498.3.2.5.1.1 |
sc5000SlotNumberThe value indicates shelf slot containing the LTU.ro INTEGER .1.3.6.1.4.1.498.3.2.5.1.1.1 |
sc5000DS0AssignOne Octet per DS0. Values are as follows:
1 = Highway
2 = Cascade
3 = Busy Out
4 = Not Presentrw OCTET STRING .1.3.6.1.4.1.498.3.2.5.1.1.2 |
sc5000ConfigCSUMode'csuMode' indicates the unit is operating as a T1 channel
service unit with the payload from the network interface
connected to the payload of the cascade interface.
'concentratorMode' indicates the unit is operating as a T1
channel service unit with the T1 payloads groomed to
cross connect within the shelf and the network and cascade
interfaces.rw Enumeration .1.3.6.1.4.1.498.3.2.5.1.1.3 |
gdcSc5000Circuit OBJECT IDENTIFIER .1.3.6.1.4.1.498.3.2.6 |
sc5000CircuitTableA table that contains information about
sc5000 circuits. SEQUENCE OF Sc5000CircuitEntry .1.3.6.1.4.1.498.3.2.6.1 |
sc5000CircuitEntryA list of information for each node in the system. Sc5000CircuitEntry .1.3.6.1.4.1.498.3.2.6.1.1 |
sc5000CircuitIndexInteger value which uniquely identifies the node to which this
entry is applicable. SCinstance is defined to be ssllddcc where:
ss (byte value) - physical shelf slot location (01-32)
ll (byte value) - line number (01-128)
dd (byte value) - drop number (00-31)
cc (byte value) - channel or extension numberro SCinstance .1.3.6.1.4.1.498.3.2.6.1.1.1 |
sc5000CircuitTypeThis object defines the circuit type.ro Enumeration .1.3.6.1.4.1.498.3.2.6.1.1.2 |