GDCDATX-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for GDCDATX-MIB.
68
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
gdc OBJECT IDENTIFIER .1.3.6.1.4.1.498 |
RFC1155-SMI Unknown .1.3.6.1.4.1.498 |
datx OBJECT IDENTIFIER .1.3.6.1.4.1.498.7 |
datxSystem OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.1 |
datxVersion OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.1.1 |
datxMIBversionIdentifies the version of the MIB. The format of the version
is x.yzT, where 'x' identifies the major revision number, 'y'
identifies the minor revision number, 'z' identifies the
typographical revision, and T identifies the test revision.
Acceptable values for the individual revision components are
as follows:
x: 1 - 9
y: 0 - 9
z: 0 - 9
T: A - Z
Upon formal release, no designation for the test revision will
be present.ro Unknown .1.3.6.1.4.1.498.7.1.1.1 |
datxMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.1.2 |
datxMaintTableThis table describes the maintenance objects for the unit SEQUENCE OF DatxMaintEntry .1.3.6.1.4.1.498.7.1.2.1 |
datxMaintEntryAn entry in the GDC Datx Maintenance Table. DatxMaintEntry .1.3.6.1.4.1.498.7.1.2.1.1 |
datxMaintIndexThe index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
slot, line, drop, and sub-identifier.ro SCinstance .1.3.6.1.4.1.498.7.1.2.1.1.1 |
datxFirmwareRevThe version number of the firmware, to allow products to
know which revision is installed. The released version
number is sequenced from
versions are numerical from 01 to 99.ro DisplayString .1.3.6.1.4.1.498.7.1.2.1.1.2 |
datxDefaultInitThis is used to allow the NonVolatile Configuration to
be set to a factory default state. When this value is set to
factoryDefault(2) the unit will perform
a reset to make the default configuration take affect.
The value of normal(1) will be returned when the initialization
is complete.rw Enumeration .1.3.6.1.4.1.498.7.1.2.1.1.3 |
datxFrontPanelThis variable is used to indicate whether the front
panel switches are operational or not.
'inhibit' refers to when the front panel switches are
not operational.
'enable' refers to when the front panel switches are
operational.rw Enumeration .1.3.6.1.4.1.498.7.1.2.1.1.4 |
datxLedStatusReturns a bitwise snapshot of the front panel LED state.
Octet 1 bit 7 - not used
bit 6 - ON
bit 5 - RD
bit 4 - SD
bit 3 - CS
bit 2 - CO
bit 1 - ALM
bit 0 - TM
Octet 2 bit 7 - not used
bit 6 - ST
bit 5 - LL
bit 4 - RDL
bit 3 - future use
bit 2 - future use
bit 1 - future use
bit 0 - future usero OCTET STRING .1.3.6.1.4.1.498.7.1.2.1.1.5 |
datxConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.1.3 |
datxTransConfigTableThis table describes the DATX transmission mode
configuration options SEQUENCE OF DatxTransConfigEntry .1.3.6.1.4.1.498.7.1.3.1 |
datxTransConfigEntryAn entry in the transmission configuration table DatxTransConfigEntry .1.3.6.1.4.1.498.7.1.3.1.1 |
datxTransConfigIndexThe index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
slot, line, drop, and sub-identifier.ro SCinstance .1.3.6.1.4.1.498.7.1.3.1.1.1 |
datxBaudRateSYNC/ASYNC Mode operation and Baud Ratesrw Enumeration .1.3.6.1.4.1.498.7.1.3.1.1.2 |
datxSyncTxClockSourceSynchronous Tx Clock Configurationrw Enumeration .1.3.6.1.4.1.498.7.1.3.1.1.3 |
datxEiaSyncClockControl for the EIA sync clockrw Enumeration .1.3.6.1.4.1.498.7.1.3.1.1.4 |
datxEiaConfigTableDATX EIA line configuration options SEQUENCE OF DatxEiaConfigEntry .1.3.6.1.4.1.498.7.1.3.2 |
datxEiaConfigEntryAn entry in the EIA config table DatxEiaConfigEntry .1.3.6.1.4.1.498.7.1.3.2.1 |
datxEIAIndexThe index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
slot, line, drop, and sub-identifier.ro SCinstance .1.3.6.1.4.1.498.7.1.3.2.1.1 |
datxCarrierControlrw Enumeration .1.3.6.1.4.1.498.7.1.3.2.1.2 |
datxRtsModeRTS mode selectionrw Enumeration .1.3.6.1.4.1.498.7.1.3.2.1.3 |
datxRtsCtsDelayRTS/CTS Delay timerw Enumeration .1.3.6.1.4.1.498.7.1.3.2.1.4 |
datxEiaRdlControlEIA RDL control selectionrw Enumeration .1.3.6.1.4.1.498.7.1.3.2.1.5 |
datxDsrInAlSelection for providing DSR will in AL moderw Enumeration .1.3.6.1.4.1.498.7.1.3.2.1.6 |
datxEiaAlControlEIA AL controlrw Enumeration .1.3.6.1.4.1.498.7.1.3.2.1.7 |
datxMiscConfigTableDATX misc configuration options SEQUENCE OF DatxMiscConfigEntry .1.3.6.1.4.1.498.7.1.3.3 |
datxMiscConfigEntryAn entry in the misc config table DatxMiscConfigEntry .1.3.6.1.4.1.498.7.1.3.3.1 |
datxMiscIndexThe index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
slot, line, drop, and sub-identifier.ro SCinstance .1.3.6.1.4.1.498.7.1.3.3.1.1 |
datxSystemStatusOptionCauses to drop CTS in master mode when remote drops linerw Enumeration .1.3.6.1.4.1.498.7.1.3.3.1.2 |
datxDualSignalingTimerrw Enumeration .1.3.6.1.4.1.498.7.1.3.3.1.3 |
datxRegenCharLengthSynchronous Tx Clock Configurationrw Enumeration .1.3.6.1.4.1.498.7.1.3.3.1.4 |
datxRegenModeRegen Mode Controlrw Enumeration .1.3.6.1.4.1.498.7.1.3.3.1.5 |
datxAsyncRaterw Enumeration .1.3.6.1.4.1.498.7.1.3.3.1.6 |
datxDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.1.4 |
datxDiagnosticsTableDATX diagnostics options SEQUENCE OF DatxDiagEntry .1.3.6.1.4.1.498.7.1.4.1 |
datxDiagEntryList of Diagnostic Tests and Status Indicators
related to the tests DatxDiagEntry .1.3.6.1.4.1.498.7.1.4.1.1 |
datxDiagnosticsIndexThe index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
slot, line, drop, and sub-identifier.ro SCinstance .1.3.6.1.4.1.498.7.1.4.1.1.1 |
datxDiagTestPerform diagnostic tests on a unit
noTest - stops any test in progress
selfTest - sends a selftest pattern
analoop - puts the unit into analog loopback
analoopSelfTest - puts the unit into analog loopback with
a self test pattern
remoteDL - performs a remote digital loopback
remoteDLselfTest - performs a remote digital loopback with
a self test patternrw Enumeration .1.3.6.1.4.1.498.7.1.4.1.1.2 |
datxTestErrorTest result indicator, shows the results of the last testro Enumeration .1.3.6.1.4.1.498.7.1.4.1.1.3 |
datxTestDurationIndicates the time duration of any test in progressro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.498.7.1.4.1.1.4 |
datxStatus OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.1.5 |
datxStatusTableDATX Status indicators SEQUENCE OF DatxStatusEntry .1.3.6.1.4.1.498.7.1.5.1 |
datxStatusEntryEntry in the status indicator table DatxStatusEntry .1.3.6.1.4.1.498.7.1.5.1.1 |
datxStatusIndexThe index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
slot, line, drop, and sub-identifier.ro SCinstance .1.3.6.1.4.1.498.7.1.5.1.1.1 |
datxDTRstatusDTR EIA status indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.2 |
datxRDLstatusRDL EIA control status indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.3 |
datxCOstatusCO EIA status indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.4 |
datxCTSstatusCTS EIA indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.5 |
datxRTSstatusRTS EIA indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.6 |
datxTMstatusTest mode EIA indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.7 |
datxALstatusAnaloop EIA status indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.8 |
datxDSRstatusDSR EIA status indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.9 |
datxRXclockRxClk activity indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.10 |
datxTXclockTxClk activity indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.11 |
datxEXTclockExternal clock activity indicatorro Enumeration .1.3.6.1.4.1.498.7.1.5.1.1.12 |
datxAlarmStatusThe current alarms of the unit without the alarm masks.ro OCTET STRING .1.3.6.1.4.1.498.7.1.5.1.1.13 |
dtx2011 OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.2 |
dtx2011AlarmData OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.2.1 |
dtx2011NoResponseAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.2.1.1 |
dtx2011DiagRxErrAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.2.1.2 |
dtx2011PowerUpAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.2.1.3 |
dtx2011DCDLossAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.2.1.4 |
dtx2011NoExtClockAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.7.2.1.5 |