GBNPlatformOAM-MIB
AI MIB Summary
The GBNPlatformOAM-MIB module facilitates the monitoring and management of GBN (Gigabit Broadband Network) platform operations, administration, and maintenance functions, specifically tracking device health status, interface states, and system resource utilization across GBN enterprise hardware.
Gbn Common Enterprise MIB definition.
Main OID:
gbnPlatformOAM.1.3.6.1.4.1.13464.1.2.1.1
132
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
132 total| Object Name |
|---|
gbnPlatformOAMGbn Common Enterprise MIB definition. MODULE-IDENTITY .1.3.6.1.4.1.13464.1.2.1.1 |
gbnPlatformOAMSysIf OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.1 |
sysIfMACAddrDURABLE: { '000000000000'H }
The base (i.e., first) MAC address used by the gbn agent for its
in-band ports.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.1.1 |
sysIfIpAddressDURABLE: { '00000000'H }
The IP Address for sw0 (swEND 0); only applies after reset -
see 'gbnCommonMiscReset'.rw IpAddress .1.3.6.1.4.1.13464.1.2.1.1.1.2 |
sysIfIPGateAddressDURABLE: { '00000000'H }
The default Gateway Address (i.e., next hop router) for sw0
(swEND 0); only applies after reset - see 'gbnCommonMiscReset'.rw IpAddress .1.3.6.1.4.1.13464.1.2.1.1.1.3 |
sysIfIPNetMaskDURABLE: { 'ffffff00'H }
The IP NetMask for sw0 (swEND 0); only applies after reset -
see 'gbnCommonMiscReset'.rw IpAddress .1.3.6.1.4.1.13464.1.2.1.1.1.4 |
sysIfIPStatusThis object is used to synchronize the modification of the IP
parameters used by the protocol stack based on the gbnCommonIP
MIB objects. This allows the user to change gbnCommonIPMACAddr,
gbnCommonIPIpAddress, gbnCommonIPGateAddress, and
gbnCommonIPNetMask, and then apply the changes to the unit
using apply(4). If gbnCommonIPStatus returns notModified(1),
no modifications were made to any gbnCommonIP MIB objects.
If gbnCommonIPStatus returns modified(2), one or more objects
were changed, but have not been applied. Both notModified(1)
and modified(2) are read-only values; the agent returns a
SNMP-BADVALUE for sets using these values. Both restore(3) and
apply(4) are valid SET values. If one or more of the gbnCommonIP
objects were modified, the user can restore the parameters to a
mirror of the NVM values using restore(3).rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.1.5 |
sysIfBOOTPOnOffDURABLE: { disable }
Enable/Disable BOOTP operation for the gbn agent.
When 'disable(2)', no BOOTPs are transmitted by the Application.
When 'enable(1)', the Application sends BOOTP requests during
system startup.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.1.7 |
sysIfDHCPOnOffDURABLE: { disable }
Enable/Disable DHCP operation for the gbn agent.
When 'disable(2)', no DHCPs are transmitted by the Application.
When enabled, the Application sends DHCP requests during
system startup.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.1.8 |
sysIfManageVLANTbaleManageVlan table SEQUENCE OF SysIfManageVLANEntry .1.3.6.1.4.1.13464.1.2.1.1.1.9 |
sysIfManageVLANEntryManageVlan entry SysIfManageVLANEntry .1.3.6.1.4.1.13464.1.2.1.1.1.9.1 |
sysIfManageVLANVidManageVLAN-ID, as an index, the maximum number is 26.ro INTEGER .1.3.6.1.4.1.13464.1.2.1.1.1.9.1.1 |
sysIfManageVLANRowStatusManageVLAN statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.1.9.1.2 |
gbnPlatformOAMSystem OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.2 |
softwarePlateSoftware platform used by switches.ro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.1 |
softwareVersionSoftware version, the format is V100R001B02D06P03SP3ro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.2 |
softwareCompiledTimeESoftware Compiled time displayed in English, the format is Feburary 17 2003 15:47:00ro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.3 |
softwareCompiledTimeCSoftware Compiled timero DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.4 |
cpuDescriptionSystem CPU description, the format is Mips 32334, 133MHzro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.5 |
sdramDescriptionSystem Memory description, the format is 32Mro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.6 |
flashDescriptionSystem Flash description, the format is 4096kro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.7 |
hardwareVersionHardware version, the format is V3.0ro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.8 |
bootromVersionBootrom version, the format is V2.0ro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.9 |
hostNameSystem host namerw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.10 |
cpuIdleThe percentage of free CPU in the current system.ro INTEGER .1.3.6.1.4.1.13464.1.2.1.1.2.11 |
memorySizeThe current system memory size, unit is byte.ro Integer32 .1.3.6.1.4.1.13464.1.2.1.1.2.12 |
memoryIdleThe current system free memory size, unit is byte.ro Integer32 .1.3.6.1.4.1.13464.1.2.1.1.2.13 |
systemClock OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.2.14 |
clockTimeThe current calendar time in seconds. The based time is 1979/1/1.
Year of the date must be the number between 2000 and 2099rw Unsigned32 .1.3.6.1.4.1.13464.1.2.1.1.2.14.1 |
timeZoneNamethe timezone name,1-32 letters.rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.14.2 |
timeZoneOffsetseconds between current timezone and GMTrw Integer32 .1.3.6.1.4.1.13464.1.2.1.1.2.14.3 |
offsetNegFlagearlier or latter than GMT,it is true when timeZoneOffset is negativerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.2.14.4 |
productNameDURABLE: { 'WindRiver gbn Agent' }
The product name associated with this agent. This name is
displayed on the console screens and Web pages.rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.15 |
systemResetPhysically performs a hardware reset of the unit.
Use with care. A 'reset(2)' resets the unit, a
'resetToDefaults(3)' resets the NVM configuration
to factory defaults and then resets the unit, and 'noop(1)'
does nothing. A value of 'noop(1)' is always returned for a
GET operation.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.2.16 |
writeConfigWhen set to 'save(2)', config file is saved to NVM (Nonvolatile
Memory). NVM save operations may be slow (e.g., erasing/writing
Flash device).
Consequently, all or many updates should be made before
saving to NVM. Note that the SNMP set to 'save(2)' returns
immediately to the caller. Gets on this object then return
'saveInProgress(3)' until the save operation completes, at
which time 'noop(1)' is returned if the save operation is
succeeded, otherwise 'saveFailed(4)' is returned. Consequently,
a get operation always returns 'noop(1)', 'saveInProgress(3)'
or 'saveFailed(4) depending on the current state and the result
of the save operation.
The agent returns 'badValue' for SNMPv1 or 'inconsistentValue'
for SNMPv2c/v3 for a set to 'Save(2)' while the current get
state is 'saveInProgress(3)'.
Attempts to set this object to 'saveInProgress(3)' or 'saveFailed(4)'
returns 'badValue' for SNMPv1 or 'wrongValue' for SNMPv2c/v3.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.2.17 |
saveNMInterfaceConfig OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.2.18 |
nmInterfaceIdinterface id of vlan saved for nm-interface configuration.rw INTEGER .1.3.6.1.4.1.13464.1.2.1.1.2.18.1 |
nmInterfaceIpAddressip address saved for nm-interface configuration.rw IpAddress .1.3.6.1.4.1.13464.1.2.1.1.2.18.2 |
nmInterfaceNetMaskmask saved for nm-interface configuration.rw IpAddress .1.3.6.1.4.1.13464.1.2.1.1.2.18.3 |
nmInterfaceGateAddressgateway address saved for nm-interface configuration.rw IpAddress .1.3.6.1.4.1.13464.1.2.1.1.2.18.4 |
writeNMInterfaceConifigWe save the nm-interface configuration through setting this Mib. When setting to
'saveNmconfig(1)', nm-interface configuration is starting to be saved.
At the same time the value of writeNMInterfaceConifigStatus Mib is set to 'saveInProgress(2)'.
Then the value of nmInterfaceId, nmInterfaceIpAddress, nmInterfaceNetMask,
nmInterfaceGateAddress will be read one by one.According to these value,
the nm-interface configuration is to be saved.
Untill the process was over the value of writeNMInterfaceConifigStatus Mib is
changed to 'saveSuccess(1)'. And if the process was ended for exception the value
of writeNMInterfaceConifigStatus Mib is set to a error code from
'saveFailed(3)' to 'invalidIpOrMask(11)'.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.2.18.5 |
writeNMInterfaceConifigStatusReserve the status of process in saving Nmconfig.ro Enumeration .1.3.6.1.4.1.13464.1.2.1.1.2.18.6 |
prodSerialNoProduct Serial Numberro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.2.19 |
cpuBusyStatusCPU busy statusro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.2.20 |
cpuBusyAlarmEnablethe enable status of cpu busy alarm.rw TruthValue { true (1), false (2) } .1.3.6.1.4.1.13464.1.2.1.1.2.21 |
cpuBusyThresholdCPU busy threshold.rw INTEGER .1.3.6.1.4.1.13464.1.2.1.1.2.22 |
cpuUnbusyThresholdCPU unbusy threshold.rw Integer32 .1.3.6.1.4.1.13464.1.2.1.1.2.23 |
cpuStatusTrap OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.2.24 |
cpuBusyTrapcpu busy trap. NOTIFICATION-TYPE .1.3.6.1.4.1.13464.1.2.1.1.2.24.1 |
cpuUnbusyTrapcpu unbusy trap. NOTIFICATION-TYPE .1.3.6.1.4.1.13464.1.2.1.1.2.24.2 |
gbnPlatformOAMIpAccessControl OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.3 |
ipAccessControlTableIP address access control table. SEQUENCE OF IpAccessControlEntry .1.3.6.1.4.1.13464.1.2.1.1.3.1 |
ipAccessControlEntryIP address access control entry. IpAccessControlEntry .1.3.6.1.4.1.13464.1.2.1.1.3.1.1 |
controlIpAddressThe accessible ip address of the switchro IpAddress .1.3.6.1.4.1.13464.1.2.1.1.3.1.1.1 |
controlIpMaskThe accessible ip address mask of the switch, wildcard supports mask and unmaskro IpAddress .1.3.6.1.4.1.13464.1.2.1.1.3.1.1.2 |
controlTeminalThe client type connected to switch, snmp(1) means connecting switch by SNMP,
web(2) means connecting switch by WEB, telnet(3) means connecting switch by telnet.ro Enumeration .1.3.6.1.4.1.13464.1.2.1.1.3.1.1.3 |
controlStatusIP address control status, active(1) means adding the ip address to list,
destroy(2) means deleting the ip address from listrw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.3.1.1.4 |
gbnPlatformOAMWatchDog OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.4 |
softDogProxyEnable/disable the soft dog.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.4.1 |
gbnPlatformOAMMuser OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.5 |
musrTableA Table of usr-name and Password. SEQUENCE OF MusrEntry .1.3.6.1.4.1.13464.1.2.1.1.5.1 |
musrEntryA list of usr parameters. MusrEntry .1.3.6.1.4.1.13464.1.2.1.1.5.1.1 |
musrIndexA simple index into 'gbnCommonUsrTable'. Integer32 .1.3.6.1.4.1.13464.1.2.1.1.5.1.1.1 |
musrNameA simple usrname of gbnCommonUsrEntry.rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.5.1.1.2 |
musrPasswordA simple password of gbnCommonUsrEntry.rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.5.1.1.3 |
musrTypeDURABLE: { NormalUser }
A simple UsrType into 'gbnCommonUsrTable'.
when 'NomalUser' configuration is limittedrw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.5.1.1.4 |
musrRowStatusDURABLE: { disable }
A simple RowStatus into 'gbnCommonUsrTable'.
when 'disable' the user is deletedrw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.5.1.1.5 |
manageUserAuthenTypeAuthentication method 1:local, 2:radius, 3:radius first and then local after failed,4:tacacsplus,5:tacacsplus first, and then local after failed.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.5.2 |
manageUserAuthenRadiusNameradius server name.rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.5.3 |
manageUserAuthChallegeTypeRadius authentication method 1:CHAP, 2:PAP.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.5.4 |
manageUserTacacsAuthorauthorization afer authenticastion.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.5.5 |
manageUserTacacsAccountaccounting after authorization.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.5.6 |
gbnPlatformOAMUpDownLoad OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.6 |
loadTftpAddressDURABLE:
The IP Address for the TFTP server used for downloading
and/or uploading files.rw IpAddress .1.3.6.1.4.1.13464.1.2.1.1.6.1 |
loadTftpFileNameDURABLE:
The TFTP file path and name.rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.6.2 |
loadTypeDURABLE: { application }
The type of file to download or upload upon an
'gbnCommonLoadExecute'.
application:program file of the switch
configuration:configuration file,should be uploaded before
you download it.
miccode:microcode is the program file of vdsl chip.
removed during the boot Flash write operation, the agent
cannot be recovered).rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.6.3 |
loadExecuteExecute file download or upload procedure. A SET of this
object starts the load procedure. Note that the Application
and Boot images can only be downloaded. The NVM Configuration
file can be uploaded and downloaded. A GET of this object
will return the status of the executed operation.
Use 'gbnCommonLoadExecuteStatus' to determine the status of
the executed load.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.6.4 |
loadExecuteStatusProvides status on the execute file load progress.ro Enumeration .1.3.6.1.4.1.13464.1.2.1.1.6.5 |
loadFtpAddressDURABLE:
The IP Address for the FTP server used for downloading
and/or uploading files.rw IpAddress .1.3.6.1.4.1.13464.1.2.1.1.6.6 |
loadFtpFileNameDURABLE:
The FTP file path and name.rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.6.7 |
loadFtpUserNameDURABLE:
The FTP user name.rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.6.8 |
loadFtpUserPasswordDURABLE:
The FTP user password.rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.6.9 |
gbnPlatformOAMSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.7 |
snmpCommunityToViewTableA table of SNMPv1/v2c community string to view name mappings. SEQUENCE OF SnmpCommunityToViewEntry .1.3.6.1.4.1.13464.1.2.1.1.7.1 |
snmpCommunityToViewEntryA list of community-to-view parameters. SnmpCommunityToViewEntry .1.3.6.1.4.1.13464.1.2.1.1.7.1.1 |
snmpComm2ViewIndexA simple index into 'gbnCommonCommunityToViewTable'. Integer32 .1.3.6.1.4.1.13464.1.2.1.1.7.1.1.1 |
snmpComm2ViewCommNameDURABLE: { 'public','':all }
The SNMPv1/v2c community name string. Duplicate community
names are not allowed in this table. Note that a null string
is not a valid community name (i.e., a null string forces
'gbnCommonComm2ViewRowStatus' to 'notReady(3)').rw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.7.1.1.2 |
snmpComm2ViewViewNameDURABLE: { 'internet':all }
At runtime (i.e., not when this object is SET), this view name
is compared to the 'vacmViewTreeFamilyViewName' in the
'vacmViewTreeFamilyTable' (see RFC2575). If a match is
found and the varbind(s) specify valid object type and instance,
the 'gbnCommonComm2ViewPermission' privilege is permitted.
Note that a null string is not a valid view name value.
Also note that the value of this object does not have to match
an existing entry in the 'vacmViewTreeFamilyTable' (if no match,
no access is allowed).
Note that the factory default value for this object is 'internet',
which allows access to the subtree under '1.3.6.1'.rw SnmpAdminString .1.3.6.1.4.1.13464.1.2.1.1.7.1.1.3 |
snmpComm2ViewPermissionDURABLE: { readWrite:all }
This object specifies the type of access allowed. 'readOnly(1)'
allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and
'readWrite(2)' allows both GET and SET operations.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.7.1.1.4 |
snmpComm2ViewRowStatusDURABLE:
This object indicates the status of this entry. A row in this
table can be created using the 'createAndGo(4)' (i.e., all
parameters must be valid - supplied in a single SNMP PDU or have
default values) or the 'createAndWait(5)' action states. Until
all parameters are valid for a conceptual row, this object is
'notReady(3)'. All parameters must be valid before this object
can be set to 'active(1)'.
Any object in a conceptual row can be modified independent of the
value of this object (e.g., can be changed while 'active(1)').rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.7.1.1.5 |
snmpNotifyTypeTableA table of SNMPv1/v2c notify type . SEQUENCE OF SnmpNotifyTypeEntry .1.3.6.1.4.1.13464.1.2.1.1.7.2 |
snmpNotifyTypeEntryA list of notify type parameters. SnmpNotifyTypeEntry .1.3.6.1.4.1.13464.1.2.1.1.7.2.1 |
snmpPrivateNotifyTypenotify type.ro DisplayString .1.3.6.1.4.1.13464.1.2.1.1.7.2.1.1 |
snmpNotifyTypeStatusIt signifies if the traps with corresponding notify-type can be sent.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.7.2.1.2 |
gbnPlatformOAMSnmpNotifyType OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.7.3 |
snmpNotifyTypeSaveConfigurationA private type for traps or informs. It signifies that the SNMPv2 entity
have just saved the configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.13464.1.2.1.1.7.3.1 |
snmpTrapSourceThe id of vlan or supervlan which interface traps or informs are
sent from belongs to. vlan id: 0-4094; supervlan id: 0-11.rw INTEGER .1.3.6.1.4.1.13464.1.2.1.1.7.4 |
snmpRemoteEngineTableA table of remote engine . SEQUENCE OF SnmpRemoteEngineEntry .1.3.6.1.4.1.13464.1.2.1.1.7.5 |
snmpRemoteEngineEntryA list of remote engine. SnmpRemoteEngineEntry .1.3.6.1.4.1.13464.1.2.1.1.7.5.1 |
snmpRemoteEngineIDThe remote engine's id.Note that the engine id can
only appear once in the table. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.7.5.1.1 |
snmpRemoteHostTAddrThe ip and port number of remote host.Note that the value including ip and
port number can only appear once in the table.rw OCTET STRING .1.3.6.1.4.1.13464.1.2.1.1.7.5.1.2 |
snmpDeleteRemoteEngineTableRowYou can delete a row by setting the value to 'deleteRow(1)'.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.7.5.1.3 |
snmpTrapSourceTypeThe type of the interface which traps or informs are sent from.
1: vlan interface; 2: supervlan interface.rw INTEGER .1.3.6.1.4.1.13464.1.2.1.1.7.6 |
gbnPlatformOAMSntpClient OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.8 |
gbnPlatformOAMSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.9 |
gbnPlatformOAMPortCar OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.10 |
portCarTableA Table of port CAR. SEQUENCE OF PortCarEntry .1.3.6.1.4.1.13464.1.2.1.1.10.1 |
portCarEntryA list of port CAR. PortCarEntry .1.3.6.1.4.1.13464.1.2.1.1.10.1.1 |
portCarPortThe port number. Integer32 .1.3.6.1.4.1.13464.1.2.1.1.10.1.1.1 |
portCarEnableThe enable status of the port CARrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.10.1.1.2 |
portDiscardBpduThe enable status of the port discard BPDUrw Integer32 .1.3.6.1.4.1.13464.1.2.1.1.10.1.1.3 |
portCarRateBpduThe port CAR max packet receive rate.rw Integer32 .1.3.6.1.4.1.13464.1.2.1.1.10.1.1.4 |
portCarGlobalEnableThe global enable status of port CAR.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.10.2 |
portCarOpenTimeThe closed port Re-open time.rw Integer32 .1.3.6.1.4.1.13464.1.2.1.1.10.3 |
discardBpduThe global enable status of port discard BPDU.rw Integer32 .1.3.6.1.4.1.13464.1.2.1.1.10.4 |
portCarRateThe port CAR max packet receive rate.rw Integer32 .1.3.6.1.4.1.13464.1.2.1.1.10.5 |
gbnPlatformOAMSsh OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.11 |
gbnPlatformOAMMailalarm OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.12 |
gbnPlatformOAMVctRun OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.13 |
vctRunTableA Table of VCT run. SEQUENCE OF VctRunEntry .1.3.6.1.4.1.13464.1.2.1.1.13.1 |
vctRunEntryA list of VCT run. VctRunEntry .1.3.6.1.4.1.13464.1.2.1.1.13.1.1 |
vctRunPortThe port number. Integer32 .1.3.6.1.4.1.13464.1.2.1.1.13.1.1.1 |
vctRunEnableThe enable status of the VCT runrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.13.1.1.2 |
vctAutoRunEnableThe enable status of the VCT auto runrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.13.1.1.3 |
vctAutoRunGlobalEnableThe global enable status of VCT auto run.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.13.2 |
gbnPlatformOAMVctRunResult OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.14 |
vctRunResultTableA Table of VCT run result. SEQUENCE OF VctRunResultEntry .1.3.6.1.4.1.13464.1.2.1.1.14.1 |
vctRunResultEntryA list of VCT run result. VctRunResultEntry .1.3.6.1.4.1.13464.1.2.1.1.14.1.1 |
vctRunResultPortThe port number. Integer32 .1.3.6.1.4.1.13464.1.2.1.1.14.1.1.1 |
vctRunResultTxRxPairNoThe tx rx pair NO. VctRunResultTxRxPairNoType .1.3.6.1.4.1.13464.1.2.1.1.14.1.1.2 |
vctRunResultStatusThe status of the VCT run resultro VctRunResultStatusType .1.3.6.1.4.1.13464.1.2.1.1.14.1.1.3 |
vctRunResultErrorLocationThe error location of the VCT run resultro Integer32 .1.3.6.1.4.1.13464.1.2.1.1.14.1.1.4 |