GBNDeviceSwitch-MIB
Gbn Common Enterprise MIB definition.
Main OID:
gbnDeviceSwitch.1.3.6.1.4.1.13464.1.2.2.1
96
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
96 total| Object Name |
|---|
gbnDeviceSwitchGbn Common Enterprise MIB definition. MODULE-IDENTITY .1.3.6.1.4.1.13464.1.2.2.1 |
gbnDeviceSwitchMirror OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.1 |
mirroringPortThis port which all packets send to.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.1.1 |
mirroredEgrPortThe egress ports which need to monitor.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.13464.1.2.2.1.1.2 |
mirroredIgrPortThe ingress ports which need to monitor.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.13464.1.2.2.1.1.3 |
gbnDeviceSwitchPort OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.2 |
portTypeTableA table of switch interfaces and associated properties. SEQUENCE OF PortTypeEntry .1.3.6.1.4.1.13464.1.2.2.1.2.1 |
portTypeEntryTable entry for switch interface control and status information. PortTypeEntry .1.3.6.1.4.1.13464.1.2.2.1.2.1.1 |
portNumberthe index of port.ro INTEGER .1.3.6.1.4.1.13464.1.2.2.1.2.1.1.1 |
portTypero Enumeration .1.3.6.1.4.1.13464.1.2.2.1.2.1.1.2 |
gbnDeviceSwitchAggregation OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.3 |
aggTableA table that contains information about every
Aggregator that is associated with this System.obsolete SEQUENCE OF AggEntry .1.3.6.1.4.1.13464.1.2.2.1.3.1 |
aggEntryA list of the Aggregator parameters. This is indexed
by the ifIndex of the Aggregator.obsolete AggEntry .1.3.6.1.4.1.13464.1.2.2.1.3.1.1 |
aggUnitThe Interface Unit of the Aggregation.roobsolete INTEGER .1.3.6.1.4.1.13464.1.2.2.1.3.1.1.1 |
aggPortThe MasterPort of the Aggregation.roobsolete INTEGER .1.3.6.1.4.1.13464.1.2.2.1.3.1.1.2 |
aggPortListPortsThe complete set of ports currently associated with
this Aggregator. Each bit set in this list represents
an Actor Port member of this Link Aggregation.rwobsolete PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.13464.1.2.2.1.3.1.1.3 |
aggRuleThe Rule to be applied to this Link Aggregator's Trunk Group
Table. The rules are based on the following selections SrcMAC (1),
means that the last three bits of the Source MAC Address are used to
index the Trunk Group to get the destination port. DestMAC (2), means
the last three bits of the Destination MAC Address are used to index
into the Trunk Group to get the destination port. SrcXORDestMAC (3),
means that the last three bits of the Source MAC Address are logically
XORed with the last three bits of the Destination MAC Address and used
to index into the Trunk Group to get the destination port. SrcIP (4),
means the last three bits of the Source IP Address are used to index
into the Trunk Group to get the destination port. DestIP (5), means
the last three bits of the Destination IP Address are used to index
into the Trunk Group to get the destination port. SrcXORDestIP (6),
means the last three bits of the Source IP Address are logically XORed
with the last three bits of the Destination IP Address and used to
index into the Trunk Group to get the destination port. This rule
defines the distribution algorithm applied to the aggregated link.rwobsolete Enumeration .1.3.6.1.4.1.13464.1.2.2.1.3.1.1.4 |
aggRowstatusrowstatus of trunk.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.1.3.1.1.5 |
gbnDeviceSwitchL3 OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.4 |
l3Table SEQUENCE OF L3Entry .1.3.6.1.4.1.13464.1.2.2.1.4.1 |
l3Entry L3Entry .1.3.6.1.4.1.13464.1.2.2.1.4.1.1 |
l3IpAddressro IpAddress .1.3.6.1.4.1.13464.1.2.2.1.4.1.1.1 |
l3NextHopMacAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.1.4.1.1.2 |
l3Vlanro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.13464.1.2.2.1.4.1.1.3 |
l3Portro INTEGER .1.3.6.1.4.1.13464.1.2.2.1.4.1.1.4 |
l3CreateTimeCreate Time,such as 2004-07-29,13:30:15.0ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.1.4.1.1.5 |
l3UpdateTimeUpdate Time,such as 2004-07-29,13:30:15.0ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.1.4.1.1.6 |
gbnDeviceSwitchLoopTest OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.5 |
loopTestPortnoport bitmap:Numbers of the port to be tested.
The highest bit is port 1, the second bit is port 2, and so on.rw DisplayString .1.3.6.1.4.1.13464.1.2.2.1.5.1 |
loopTestTypeDURABLE: { 4 }
Setting this object to 2-4 enables loop back test.
Setting it to 1 disables loop back test.rw Enumeration .1.3.6.1.4.1.13464.1.2.2.1.5.2 |
loopTestSuccessif the highest bit is
0:the port 1 loop fail,
1,the port 1 loop success,
and so on.ro DisplayString .1.3.6.1.4.1.13464.1.2.2.1.5.3 |
gbnDeviceSwitchSRM OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.6 |
srmHardwareEnableAdd network routes to hardware table or not.Default is enable.rw Enumeration .1.3.6.1.4.1.13464.1.2.2.1.6.1 |
srmHardwareDEFCPUThe DEF routes goes to CPU.rw Enumeration .1.3.6.1.4.1.13464.1.2.2.1.6.2 |
gbnDeviceSwitchFlowAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.7 |
portFlowAlarmTableA Table of port flow alarm. SEQUENCE OF PortFlowAlarmEntry .1.3.6.1.4.1.13464.1.2.2.1.7.1 |
portFlowAlarmEntryA list of port flow alarm. PortFlowAlarmEntry .1.3.6.1.4.1.13464.1.2.2.1.7.1.1 |
portFlowAlarmPortThe port number. Integer32 .1.3.6.1.4.1.13464.1.2.2.1.7.1.1.1 |
portFlowAlarmEnableThe enable status of the port flow alarmrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.1.7.1.1.2 |
portFlowAlarmExceedStatusThe exceed status of the port flow alarmro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.1.7.1.1.3 |
portFlowAlarmExceedThresholdThe exceed threshold of port flow alarm.rw Integer32 .1.3.6.1.4.1.13464.1.2.2.1.7.1.1.4 |
portFlowAlarmNormalThresholdThe normal threshold of port flow alarm.rw Integer32 .1.3.6.1.4.1.13464.1.2.2.1.7.1.1.5 |
portFlowAlarmGlobalEnableThe global enable status of port flow alarm.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.1.7.2 |
portFlowAlarmTrap OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.7.5 |
portFlowAlarmExceedTrapPort ingress packet rate become too big, port flow exceed alarm happen. NOTIFICATION-TYPE .1.3.6.1.4.1.13464.1.2.2.1.7.5.1 |
portFlowAlarmNormalTrapPort ingress packet rate become normal, port flow normal alarm happen. NOTIFICATION-TYPE .1.3.6.1.4.1.13464.1.2.2.1.7.5.2 |
gbnDeviceSwitchQueneScheduer OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.8 |
qosQueueSchedulerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.8.1 |
qosWrrQueue1WeightWeight of 1th queue(%).rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.1.1 |
qosWrrQueue2WeightWeight of 2th queue(%).rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.1.2 |
qosWrrQueue3WeightWeight of 3th queue(%).rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.1.3 |
qosWrrQueue4WeightWeight of 4th queue(%).rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.1.4 |
qosWrrMaxDelayValuethe maximum allowable latency for packet transmission on the priorest COSrw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.1.5 |
qosQueueSchedulerModequeue scheduler mode: strict priority, weighted round robinrw Enumeration .1.3.6.1.4.1.13464.1.2.2.1.8.1.6 |
qosWrrQueue5WeightWeight of 5th queue(%).rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.1.7 |
qosWrrQueue6WeightWeight of 6th queue(%).rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.1.8 |
qosWrrQueue7WeightWeight of 7th queue(%).rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.1.9 |
qosWrrQueue8WeightWeight of 8th queue(%).rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.1.10 |
qosPriorityRemapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.8.2 |
qosPriority0RemapRemap of 0 priority.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.2.1 |
qosPriority1RemapRemap of 1 priority.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.2.2 |
qosPriority2RemapRemap of 2 priority.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.2.3 |
qosPriority3RemapRemap of 3 priority.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.2.4 |
qosPriority4RemapRemap of 4 priority.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.2.5 |
qosPriority5RemapRemap of 5 priority.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.2.6 |
qosPriority6RemapRemap of 6 priority.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.2.7 |
qosPriority7RemapRemap of 7 priority.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.8.2.8 |
qosPriorityRemapStatusPriority remap status: enable, disablerw Enumeration .1.3.6.1.4.1.13464.1.2.2.1.8.2.9 |
gbnDeviceSwitchLineRate OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.9 |
qosLineRateTableA list of line-rate QOS entries. SEQUENCE OF QosLineRateEntry .1.3.6.1.4.1.13464.1.2.2.1.9.1 |
qosLineRateEntryA list of line-rate QOS entries. QosLineRateEntry .1.3.6.1.4.1.13464.1.2.2.1.9.1.1 |
qosLineRateInterfacethe line rate interface.ro INTEGER .1.3.6.1.4.1.13464.1.2.2.1.9.1.1.1 |
qosLineRateTargetRatethe target rate of the line-rate QOS.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.9.1.1.2 |
gbnDeviceSwitchPortIsolation OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.10 |
portIsolationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.10.1 |
portIsolationDownLinkPortsport isolation down link portlistrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.13464.1.2.2.1.10.1.1 |
gbnDeviceSwitchStormControl OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.11 |
stormControlTableA list of storm control entries. SEQUENCE OF StormControlEntry .1.3.6.1.4.1.13464.1.2.2.1.11.1 |
stormControlEntryA list of storm control entries. StormControlEntry .1.3.6.1.4.1.13464.1.2.2.1.11.1.1 |
stormControlInterfacethe storm control interface.ro INTEGER .1.3.6.1.4.1.13464.1.2.2.1.11.1.1.1 |
stormControlTypethe pack flow type of the storm control.ro INTEGER .1.3.6.1.4.1.13464.1.2.2.1.11.1.1.2 |
stormControlTargetRatethe target rate of the storm control.rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.11.1.1.3 |
stormControlRowStatusrow status of the storm controlrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.1.11.1.1.4 |
gbnDeviceSwitchBandWidth OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.12 |
bandwidthcontrolTableA table of switch interfaces and associated properties. SEQUENCE OF BandwidthcontrolEntry .1.3.6.1.4.1.13464.1.2.2.1.12.1 |
bandwidthcontrolEntryTable entry for switch interface control and status information. BandwidthcontrolEntry .1.3.6.1.4.1.13464.1.2.2.1.12.1.1 |
controlPortthe index of port.ro INTEGER .1.3.6.1.4.1.13464.1.2.2.1.12.1.1.1 |
portEgressBandwidthcontrolEgress Speed Value of port, bandwidth control .rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.12.1.1.2 |
portIngressBandwidthcontrolIngress Speed Value of port, bandwidth control .rw INTEGER .1.3.6.1.4.1.13464.1.2.2.1.12.1.1.3 |
gbnDeviceSwitchNewStormControl OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.2.1.13 |
newStormControlTypethe pack flow type of the storm control.rw Enumeration .1.3.6.1.4.1.13464.1.2.2.1.13.1 |
newStormControlTargetRatethe target rate of the storm control.rw Enumeration .1.3.6.1.4.1.13464.1.2.2.1.13.2 |
newStormControlTableA list of storm control entries. SEQUENCE OF NewStormControlEntry .1.3.6.1.4.1.13464.1.2.2.1.13.3 |
newStormControlEntryA list of storm control entries. NewStormControlEntry .1.3.6.1.4.1.13464.1.2.2.1.13.3.1 |
newStormControlInterfacethe storm control interface.ro INTEGER .1.3.6.1.4.1.13464.1.2.2.1.13.3.1.1 |
newStormControlStatusthe status of the storm control.rw Enumeration .1.3.6.1.4.1.13464.1.2.2.1.13.3.1.2 |
More MIBs from Admin
Browse all AdminMIBs →NSCRTV-PON-TREE-EXT-MIB
The NSCRTV-PON-TREE-EXT-MIB extends the standard PON tree monitoring capabilities to track specific optical network unit (ONU) status, optical power levels, and bandwidth allocation metrics for Next-Generation Passive Optical Network (NG-PON2) or XGS-PON infrastructure. This module enables granular visibility into the physical layer topology and performance statistics of the PON tree segment, facilitating fault isolation and capacity planning for the optical distribution network.
568 objects→
GBNL2QACL-MIB
The GBNL2QACL-MIB module provides management interfaces for QTECH enterprise Layer 2 switches to monitor and configure Quality of Service (QoS) queueing parameters and Access Control List (ACL) statistics. It enables the retrieval of specific metrics regarding traffic classification, queue depths, drop counters, and ACL hit rates for policy enforcement validation.
427 objects→
GPON-MIB
SNMP MIB module
227 objects→
GBNPlatformOAM-MIB
The GBNPlatformOAM-MIB module facilitates the monitoring and management of GBN (Gigabit Broadband Network) platform operations, administration, and maintenance functions, specifically tracking device health status, interface states, and system resource utilization across GBN enterprise hardware.
134 objects→
GBNPlatformGNLink-MIB
The GBNPlatformGNLink-MIB module provides the management interface for ZyXEL's ZY.Link enterprise platform, specifically enabling the monitoring of gateway link states, interface statistics, and network topology elements. It facilitates the retrieval of operational metrics such as link status, throughput counters, and error rates for ZY.Link gateway devices via SNMP.
120 objects→
GBNL2Switch-MIB
SNMP MIB module
90 objects→