GBNL2Switch-MIB
Gbn Common Enterprise MIB definition.
Main OID:
gbnL2Switch.1.3.6.1.4.1.13464.1.2.4.1
90
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
90 total| Object Name |
|---|
gbnL2SwitchGbn Common Enterprise MIB definition. MODULE-IDENTITY .1.3.6.1.4.1.13464.1.2.4.1 |
gbnL2SwitchPacket OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.4.1.1 |
broadcastSuppressRate limit Value, the maximum number of packets per second the switch should allow to receive .rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.1.1 |
dlfForwardControl the flooding of dlf packets.rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.1.2 |
dlfForwardPortTableA table of dlf packets port control. SEQUENCE OF DlfForwardPortEntry .1.3.6.1.4.1.13464.1.2.4.1.1.3 |
dlfForwardPortEntryTable entry for dlf packets control. DlfForwardPortEntry .1.3.6.1.4.1.13464.1.2.4.1.1.3.1 |
dlfForwardPortThe port number in dlf packets table Item.ro INTEGER .1.3.6.1.4.1.13464.1.2.4.1.1.3.1.1 |
dlfForwardStatusThe dlf packets flag Item.rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.1.3.1.2 |
gbnL2SwitchMac OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.4.1.2 |
macAddressTableA table of mac address . SEQUENCE OF MacAddressEntry .1.3.6.1.4.1.13464.1.2.4.1.2.1 |
macAddressEntryTable entry for mac address . MacAddressEntry .1.3.6.1.4.1.13464.1.2.4.1.2.1.1 |
macAddressMacThe MAC address in arl table Item.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.2.1.1.1 |
macAddressVIDThe vlan ID in arl table Item.ro INTEGER .1.3.6.1.4.1.13464.1.2.4.1.2.1.1.2 |
macAddressPortThe port number in arl table Item.ro INTEGER .1.3.6.1.4.1.13464.1.2.4.1.2.1.1.3 |
macAddressStatusrw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.2.1.1.4 |
macLearningPortTableA table of mac address learning port control. SEQUENCE OF MacLearningPortEntry .1.3.6.1.4.1.13464.1.2.4.1.2.2 |
macLearningPortEntryTable entry for mac address learning control. MacLearningPortEntry .1.3.6.1.4.1.13464.1.2.4.1.2.2.1 |
macAddressLearningPortThe port number in mac address learning table Item.ro INTEGER .1.3.6.1.4.1.13464.1.2.4.1.2.2.1.1 |
macAddressLearningStatusThe mac address learning flag Item.rw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.2.2.1.2 |
macAddressMaxCountthe max mac address number of port.rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.2.2.1.3 |
gbnL2SwitchMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.4.1.3 |
igmpSnoopEnabledDURABLE: { false }
Setting this object to true(1) enables IGMP Snooping. Setting
it to false(2) disables IGMP Snooping.
Note that IGMP Snooping can function with or without GVRP and
GMRP enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.3.1 |
igmpSnoopAlertsDURABLE: { false }
Setting this object to true(1) enables the IP Router Alert
Option (as defined in RFC2113) for transmitted IGMP packets.
Setting it to false(2) disables this option.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.3.2 |
igmpSnoopAgingDURABLE: { 300 }
The timeout period in seconds for aging out Multicast Groups
dynamically learned with IGMP Snooping. Note that aging operates
on a per interface per VLAN per multicast group basis.rw Integer32 .1.3.6.1.4.1.13464.1.2.4.1.3.3 |
igmpSnoopTableThis table, which provides IGMP Snooping information, augments
the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674). SEQUENCE OF IgmpSnoopEntry .1.3.6.1.4.1.13464.1.2.4.1.3.4 |
igmpSnoopEntryDisplays by VLAN, Multicast Group, and Multicast receive port
the set of ports enabled to forward Multicast Group traffic as
determined by the IGMP Snooping task. IgmpSnoopEntry .1.3.6.1.4.1.13464.1.2.4.1.3.4.1 |
igmpSnoopEgressPortsThis read-only object displays the set of ports enabled to
forward specific Multicast Group traffic as determined by the
IGMP Snooping task.
It should be noted that the IGMP Snooping task generates a pseudo-
static (i.e., not saved in NVM) port list similar to the RFC2674
Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently,
a port will not be a member of 'gbnCommonIgmpSnoopEgressPorts' if
it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.13464.1.2.4.1.3.4.1.1 |
igmpSnoopDefaultGroupPolicyThe default group learning policy when a group address is not found in
IGMP Snooping white-list and black-listrw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.3.5 |
igmpSnoopMaxResponseTimeThe timeout period in seconds waited before determinating whether
a group port should be deleted or not after received a leave packetrw Integer32 .1.3.6.1.4.1.13464.1.2.4.1.3.6 |
igmpSnoopPortTableUsed to config IGMP Snooping port options,such as group-limit and
fast-leave. SEQUENCE OF IgmpSnoopPortEntry .1.3.6.1.4.1.13464.1.2.4.1.3.7 |
igmpSnoopPortEntryEntries of igmpSnoopPortTable. IgmpSnoopPortEntry .1.3.6.1.4.1.13464.1.2.4.1.3.7.1 |
igmpSnoopPortIndex that uniquely identifies a Ap port within igmpSnoopPortTable.ro INTEGER .1.3.6.1.4.1.13464.1.2.4.1.3.7.1.1 |
igmpSnoopPortFastLeaveThe fast-leave option of a IGMP Snooping port,when set
a group port is deleted immediately on receiving a leave
packet, otherwise a max-response-time should be waited
before deleting the port.rw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.3.7.1.2 |
igmpSnoopPortGroupLimitThe max number of Multicast groups a port can learn.rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.3.7.1.3 |
igmpSnoopPortMcastVlanSpecify a multicast vlan for a port.IGMP report groups received
on the port will be add to the multicast vlan, regardless of the
vlan id indicated by the report packets, a zero vlan means no multicast
vlan is used.rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.3.7.1.4 |
igmpSnoopGroupTableThis table is used to config IGMP Snooping white-list and
black-list. SEQUENCE OF IgmpSnoopGroupEntry .1.3.6.1.4.1.13464.1.2.4.1.3.8 |
igmpSnoopGroupEntryEntries of igmpSnoopGroupTable. IgmpSnoopGroupEntry .1.3.6.1.4.1.13464.1.2.4.1.3.8.1 |
igmpSnoopGroupAddressAn index that uniquely identifies a multicast mac-address
within igmpSnoopGroupTable. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.3.8.1.1 |
igmpSnoopGroupPortAn index that uniquely identifies a Ap port within igmpSnoopGroupTable. INTEGER .1.3.6.1.4.1.13464.1.2.4.1.3.8.1.2 |
igmpSnoopGroupVLANAn index that uniquely identifies a VLAN ID within igmpSnoopGroupTable. INTEGER .1.3.6.1.4.1.13464.1.2.4.1.3.8.1.3 |
igmpSnoopGroupPolicyThis entry is used to config IGMP Snooping white-list and
black-list.Policies defined in white-list and black-list are
superior to that has beed defined by igmpSnoopDefaultGroupPolicy.
If group is not found in white-list or black-list then
'igmpSnoopDefaultGroupPolicy' takes effectrw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.3.8.1.4 |
crossVlanMulticastEnabledSetting this object to true(1) enables cross-vlan multicast. Setting
it to false(2) disables cross-vlan multicast.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.3.9 |
crossVlanMulticastTableUsed to config port info of cross-vlan multicast,such as tag/untag and vlanid of tag. SEQUENCE OF CrossVlanMulticastEntry .1.3.6.1.4.1.13464.1.2.4.1.3.10 |
crossVlanMulticastEntryEntries of crossVlanMulticastPortTable. CrossVlanMulticastEntry .1.3.6.1.4.1.13464.1.2.4.1.3.10.1 |
crossVlanPortThe port number. Integer32 .1.3.6.1.4.1.13464.1.2.4.1.3.10.1.1 |
crossVlanPortTagSetting this object to true(1) of tag. Setting
it to false(2) of untag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.3.10.1.2 |
crossVlanPortVidThe vlanid of tag port.rw Integer32 .1.3.6.1.4.1.13464.1.2.4.1.3.10.1.3 |
igmpSnoopRoutePortForwardIf the status is enabled, the route port can be added into the group automatically
when an igmp snooping group is created . If the status is disabled, it will be not.rw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.3.11 |
gbnL2SwitchVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.4.1.4 |
portModeTableA Table of port mode. SEQUENCE OF PortModeEntry .1.3.6.1.4.1.13464.1.2.4.1.4.1 |
portModeEntryA list of portmode parameters. PortModeEntry .1.3.6.1.4.1.13464.1.2.4.1.4.1.1 |
portNumberport number'.ro Integer32 .1.3.6.1.4.1.13464.1.2.4.1.4.1.1.1 |
portModetype of moderw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.4.1.1.2 |
gbnL2SwitchLacpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.4.1.5 |
channelGroupCreateCreate a channel group .rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.5.1 |
channelGroupDeleteDelete a channel group. Make sure there is no member in this group .rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.5.2 |
channelGroupTableA table that contains information about every
Lacp channel group that is associated with this System. SEQUENCE OF ChannelGroupEntry .1.3.6.1.4.1.13464.1.2.4.1.5.3 |
channelGroupEntryA list of the Lacp channel group parameters. This is indexed
by the group index. ChannelGroupEntry .1.3.6.1.4.1.13464.1.2.4.1.5.3.1 |
channelGroupIndexThe Index of the Lacp Channel group.ro INTEGER .1.3.6.1.4.1.13464.1.2.4.1.5.3.1.1 |
channelGroupPortListThe complete set of ports currently associated with
this Group. Each bit set in this list represents
an Actor Port member of this Group.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.13464.1.2.4.1.5.3.1.2 |
channelGroupRuleThe Rule to be applied to this Link Aggregator's Trunk Group
Table. The rules are based on the following selections SrcMAC (1),
means that the last three bits of the Source MAC Address are used to
index the Trunk Group to get the destination port. DestMAC (2), means
the last three bits of the Destination MAC Address are used to index
into the Trunk Group to get the destination port. SrcXORDestMAC (3),
means that the last three bits of the Source MAC Address are logically
XORed with the last three bits of the Destination MAC Address and used
to index into the Trunk Group to get the destination port. SrcIP (4),
means the last three bits of the Source IP Address are used to index
into the Trunk Group to get the destination port. DestIP (5), means
the last three bits of the Destination IP Address are used to index
into the Trunk Group to get the destination port. SrcXORDestIP (6),
means the last three bits of the Source IP Address are logically XORed
with the last three bits of the Destination IP Address and used to
index into the Trunk Group to get the destination port. This rule
defines the distribution algorithm applied to the aggregated link.rw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.5.3.1.3 |
channelGroupRowstatusrowstatus of channel group.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.5.3.1.4 |
gbnL2SwitchLacpPort OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.4.1.6 |
lacpPortModeTableA table that contains information about every
Lacp channel group that is associated with this System. SEQUENCE OF LacpPortModeEntry .1.3.6.1.4.1.13464.1.2.4.1.6.1 |
lacpPortModeEntryThe port mode of lacp. This is indexed
by the port number. LacpPortModeEntry .1.3.6.1.4.1.13464.1.2.4.1.6.1.1 |
portIndexThe Index of the port.ro INTEGER .1.3.6.1.4.1.13464.1.2.4.1.6.1.1.1 |
portLacpModeThe mode of the Lacp Channel group.Static:link aggregation is
static configguration,and lacp protocol do not run. Active:the port
in this mode can send lacp pdu active.Passive:the port in this mode
just send pdu when needed.rw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.6.1.1.2 |
portLacpRowstatusrowstatus of port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.6.1.1.3 |
gbnL2SwitchMLD OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.4.1.7 |
mldSnoopEnabledDURABLE: { false }
Setting this object to true(1) enables MLD Snooping. Setting
it to false(2) disables MLD Snooping.
Note that MLD Snooping can function with or without GVRP and
GMRP enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.7.1 |
mldSnoopAlertsDURABLE: { false }
Setting this object to true(1) enables the IP Router Alert
Option (as defined in RFC2113) for transmitted MLD packets.
Setting it to false(2) disables this option.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.7.2 |
mldSnoopAgingDURABLE: { 300 }
The timeout period in seconds for aging out MLD Groups
dynamically learned with MLD Snooping. Note that aging operates
on a per interface per VLAN per multicast group basis.rw Integer32 .1.3.6.1.4.1.13464.1.2.4.1.7.3 |
mldSnoopTableThis table, which provides MLD Snooping information, augments
the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674). SEQUENCE OF MldSnoopEntry .1.3.6.1.4.1.13464.1.2.4.1.7.4 |
mldSnoopEntryDisplays by VLAN, MLD Group, and MLD receive port
the set of ports enabled to forward MLD Group traffic as
determined by the MLD Snooping task. MldSnoopEntry .1.3.6.1.4.1.13464.1.2.4.1.7.4.1 |
mldSnoopEgressPortsThis read-only object displays the set of ports enabled to
forward specific MLD Group traffic as determined by the
MLD Snooping task.
It should be noted that the MLD Snooping task generates a pseudo-
static (i.e., not saved in NVM) port list similar to the RFC2674
Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently,
a port will not be a member of 'gbnCommonIgmpSnoopEgressPorts' if
it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.13464.1.2.4.1.7.4.1.1 |
mldSnoopDefaultGroupPolicyThe default group learning policy when a group address is not found in
MLD Snooping white-list and black-listrw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.7.5 |
mldSnoopMaxResponseTimeThe timeout period in seconds waited before determinating whether
a group port should be deleted or not after received a leave packetrw Integer32 .1.3.6.1.4.1.13464.1.2.4.1.7.6 |
mldSnoopPortTableUsed to config MLD Snooping port options,such as group-limit and
fast-leave. SEQUENCE OF MldSnoopPortEntry .1.3.6.1.4.1.13464.1.2.4.1.7.7 |
mldSnoopPortEntryEntries of mldSnoopPortTable. MldSnoopPortEntry .1.3.6.1.4.1.13464.1.2.4.1.7.7.1 |
mldSnoopPortIndex that uniquely identifies a Ap port within mldSnoopPortTable.ro INTEGER .1.3.6.1.4.1.13464.1.2.4.1.7.7.1.1 |
mldSnoopPortFastLeaveThe fast-leave option of a MLD Snooping port,when set
a group port is deleted immediately on receiving a leave
packet, otherwise a max-response-time should be waited
before deleting the port.rw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.7.7.1.2 |
mldSnoopPortGroupLimitThe max number of MLD groups a port can learn.rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.7.7.1.3 |
mldSnoopPortMcastVlanSpecify a multicast vlan for a port.MLD report groups received
on the port will be add to the multicast vlan, regardless of the
vlan id indicated by the report packets, a zero vlan means no multicast
vlan is used.rw INTEGER .1.3.6.1.4.1.13464.1.2.4.1.7.7.1.4 |
mldSnoopGroupTableThis table is used to config MLD Snooping white-list and
black-list. SEQUENCE OF MldSnoopGroupEntry .1.3.6.1.4.1.13464.1.2.4.1.7.8 |
mldSnoopGroupEntryEntries of mldSnoopGroupTable. MldSnoopGroupEntry .1.3.6.1.4.1.13464.1.2.4.1.7.8.1 |
mldSnoopGroupAddressAn index that uniquely identifies a multicast mac-address
within mldSnoopGroupTable. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.4.1.7.8.1.1 |
mldSnoopGroupPortAn index that uniquely identifies a Ap port within mldSnoopGroupTable. INTEGER .1.3.6.1.4.1.13464.1.2.4.1.7.8.1.2 |
mldSnoopGroupVLANAn index that uniquely identifies a VLAN ID within mldSnoopGroupTable. INTEGER .1.3.6.1.4.1.13464.1.2.4.1.7.8.1.3 |
mldSnoopGroupPolicyThis entry is used to config MLD Snooping white-list and
black-list.Policies defined in white-list and black-list are
superior to that has beed defined by mldSnoopDefaultGroupPolicy.
If group is not found in white-list or black-list then
'mldSnoopDefaultGroupPolicy' takes effectrw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.7.8.1.4 |
mldSnoopRoutePortForwardIf the status is enabled, the route port can be added into the group automatically
when an mld snooping group is created . If the status is disabled, it will be not.rw Enumeration .1.3.6.1.4.1.13464.1.2.4.1.7.9 |