GBNL3If-MIB
Imported Objects
Objects
23 total| Object Name |
|---|
gbnL3IfGBN Generic router id MIB definition. MODULE-IDENTITY .1.3.6.1.4.1.13464.1.2.5.1 |
gbnL3SuperVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.5.1.2 |
arpProxyEnable/disable the ARP proxy.rw Enumeration .1.3.6.1.4.1.13464.1.2.5.1.2.1 |
superVLANTableA table of superVLAN.When create a new entry,must set superVLANStatus to be active to create
a entry first,or set superVLANsw/superVLANsuper fisrt will return no suchinstanc error SEQUENCE OF SuperVLANEntry .1.3.6.1.4.1.13464.1.2.5.1.2.2 |
superVLANEntryTable entry for superVLAN. SuperVLANEntry .1.3.6.1.4.1.13464.1.2.5.1.2.2.1 |
superVLANVIDvlan id.ro INTEGER .1.3.6.1.4.1.13464.1.2.5.1.2.2.1.1 |
superVLANswsw,0 means not existting.rw INTEGER .1.3.6.1.4.1.13464.1.2.5.1.2.2.1.2 |
superVLANsuperThe interface is superVLAN or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.5.1.2.2.1.3 |
superVLANStatusthe status of this entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.5.1.2.2.1.4 |
gbnL3Arp OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.5.1.3 |
arpTableThis form to the system ARP cache table has been defined in rfc1213 two ARP table of the system: at the group and ip group atTable ipNetToMediaTable, but this is not the two tables of information and switch port VLAN information, it is definition of this extension table. SEQUENCE OF ArpEntry .1.3.6.1.4.1.13464.1.2.5.1.3.1 |
arpEntryThe system ARP cache table. ArpEntry .1.3.6.1.4.1.13464.1.2.5.1.3.1.1 |
arpIpAddressIP address as index.ro IpAddress .1.3.6.1.4.1.13464.1.2.5.1.3.1.1.1 |
arpMacAddressIP addresses to MAC addresses.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.5.1.3.1.1.2 |
arpIfIndexIP addresses where the interface index.ro INTEGER .1.3.6.1.4.1.13464.1.2.5.1.3.1.1.3 |
arpVlanIP address where the VLAN.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.13464.1.2.5.1.3.1.1.4 |
arpPortLearning to switch port number IP address.rw INTEGER .1.3.6.1.4.1.13464.1.2.5.1.3.1.1.5 |
arpTypeThis ARP table entry type.rw Enumeration .1.3.6.1.4.1.13464.1.2.5.1.3.1.1.6 |
arpRowStatusThe ARP Table entry status, used to add / delete static ARP entries to dynamic ARP table entry if the entry is returned an error.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.5.1.3.1.1.7 |
arpAgingThe age time of dynamic arp entry.Unit is minute.Default is 20.rw INTEGER .1.3.6.1.4.1.13464.1.2.5.1.3.2 |
gbnL3DHCP OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.5.1.4 |
option82Enable/disable option82.Default is disalberw Enumeration .1.3.6.1.4.1.13464.1.2.5.1.4.1 |
option82StrategyWhen turned on in option82 DHCP relay receives the option with option82 packet content strategy adopted. Drop to drop packets, keep option82 to preserve options for the contents of the packet, and replace to replace the contents of the packets in the option82. defaults to replace.rw Enumeration .1.3.6.1.4.1.13464.1.2.5.1.4.2 |
More MIBs from Admin
Browse all AdminMIBs →The NSCRTV-PON-TREE-EXT-MIB extends the standard PON tree monitoring capabilities to track specific optical network unit (ONU) status, optical power levels, and bandwidth allocation metrics for Next-Generation Passive Optical Network (NG-PON2) or XGS-PON infrastructure. This module enables granular visibility into the physical layer topology and performance statistics of the PON tree segment, facilitating fault isolation and capacity planning for the optical distribution network.
The GBNL2QACL-MIB module provides management interfaces for QTECH enterprise Layer 2 switches to monitor and configure Quality of Service (QoS) queueing parameters and Access Control List (ACL) statistics. It enables the retrieval of specific metrics regarding traffic classification, queue depths, drop counters, and ACL hit rates for policy enforcement validation.
SNMP MIB module
The GBNPlatformOAM-MIB module facilitates the monitoring and management of GBN (Gigabit Broadband Network) platform operations, administration, and maintenance functions, specifically tracking device health status, interface states, and system resource utilization across GBN enterprise hardware.
The GBNPlatformGNLink-MIB module provides the management interface for ZyXEL's ZY.Link enterprise platform, specifically enabling the monitoring of gateway link states, interface statistics, and network topology elements. It facilitates the retrieval of operational metrics such as link status, throughput counters, and error rates for ZY.Link gateway devices via SNMP.
SNMP MIB module