Fore-Apsgroup-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Fore-Apsgroup-MIB.
SONET APS
Main OID:
foreAps.1.3.6.1.4.1.326.2.2.1.1.16
26
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
apsSwitchOverThis trap alerts that an aps switchover has occurred and the active port is identified by the tuple {hwPortBoard, hwPortModule, hwPortNumber}. NOTIFICATION-TYPE .1.3.6.1.4.1.326.2.2.0.2017 |
foreApsSONET APS MODULE-IDENTITY .1.3.6.1.4.1.326.2.2.1.1.16 |
apsPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.2.1.1.16.1 |
apsPortTableA table of SONET APS port configuration information. SEQUENCE OF ApsPortEntry .1.3.6.1.4.1.326.2.2.1.1.16.1.1 |
apsPortEntryA table entry containing SONET APS configuration information for each APS port. ApsPortEntry .1.3.6.1.4.1.326.2.2.1.1.16.1.1.1 |
apsBoardThe index of this port's switch board.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.1 |
apsModuleThe network module of this port.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.2 |
apsPortThe number of this port.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.3 |
apsAdminModeThis variable indicates the APS configuration for this port. Unprotected indicates that APS is not configured for this port. Working indicates that this port is a working channel. Protection indicates that this port is a protection channel.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.4 |
apsOperModeThis variable indicates if this port is an active or standby APS channel. If APS is not configured for this port, the mode is notApplicable. loopbackOn indicates that the port is configured in the loopback mode and is the port on which the loopback has been enabled(or is under test). loopbackOff indicates that the port is configured in the loopback mode and is the port which is in the disabled state (not under test).ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.5 |
apsPortGroupNameThis object identifies the APS group this port is associated with.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.6 |
apsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.2.1.1.16.2 |
apsGroupTableA table of SONET APS port group configuration information. SEQUENCE OF ApsGroupEntry .1.3.6.1.4.1.326.2.2.1.1.16.2.1 |
apsGroupEntryA table entry containing SONET APS configuration information for each APS group. ApsGroupEntry .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1 |
apsGroupNameThis object identifies the APS group. of all the ports associated with this group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.1 |
apsGroupStateCommandA user initiated APS command. Note this object is write-only and reading it will result in implementation-specific results.rw Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.2 |
apsGroupLastCommandLast Aps Command issued by the user.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.3 |
apsWorkingLineStateLine State of the Working Port of the APS Group.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.4 |
apsProtectionLineStateLine State of the Protection Port of the APS Group.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.5 |
apsGroupModeThis variable indicates the APS switching mode for this APS group.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.6 |
apsRxK1K2Command specified in the received K1K2 bytes.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.7 |
apsRxChannelChannel specified in received K1K2 bytes.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.8 |
apsTxK1K2Command specified in the transmitted K1K2 bytes.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.9 |
apsTxChannelChannel specified in transmitted K1K2 bytes.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.10 |
apsRevertModeAPS revertive mode configurationrw Enumeration .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.11 |
apsRevertTimerAPS revertive timer value in minutesrw Integer32 .1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.12 |