Fore-Adapter-MIB
AI MIB Summary
The Fore-Adapter-MIB facilitates the monitoring and management of ATM adapter interfaces on Fore Systems hardware, specifically tracking physical layer statistics, cell transfer rates, and error counters such as cell loss and cell delay. This module enables network administrators to observe ATM PVC/SVC session states and interface performance metrics via SNMP for troubleshooting connectivity and throughput issues on legacy ATM networks.
Fore Atm Adapter MIB
Main OID:
atmAdapter.1.3.6.1.4.1.326.2.1
132
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
132 total| Object Name |
|---|
atmAdapterFore Atm Adapter MIB MODULE-IDENTITY .1.3.6.1.4.1.326.2.1 |
adapterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.1 |
adapterTableA table of adapter information. SEQUENCE OF AdapterEntry .1.3.6.1.4.1.326.2.1.1.1 |
adapterEntryA table entry containing adapter information. AdapterEntry .1.3.6.1.4.1.326.2.1.1.1.1 |
adapterInterfaceThe ifIndex corresponding to this ATM adapter.ro Integer32 .1.3.6.1.4.1.326.2.1.1.1.1.1 |
adapterSerialNumberThe serial number of the ATM adapter hardware.ro Integer32 .1.3.6.1.4.1.326.2.1.1.1.1.2 |
adapterHardwareVersionThe version of the ATM adapter hardware. The version number is encoded into 6 hex digits. For example, version 1.1 is encoded as 0x010100.ro Integer32 .1.3.6.1.4.1.326.2.1.1.1.1.3 |
adapterHardwareSpeedThe speed of the ATM adapter hardware.ro Integer32 .1.3.6.1.4.1.326.2.1.1.1.1.4 |
adapterFirmwareVersionThe version of the ATM adapter firmware. The version number is encoded into 6 hex digits. For example, version 1.1 is encoded as 0x010100.ro Integer32 .1.3.6.1.4.1.326.2.1.1.1.1.5 |
adapterSoftwareVersionThe version of the ATM adapter software. The version number is encoded into 6 hex digits. For example, version 2.2.0 is encoded as 0x020200.ro Integer32 .1.3.6.1.4.1.326.2.1.1.1.1.6 |
adapterTransmitBufferSizeThe size of the transmit buffer, in cells.ro Integer32 .1.3.6.1.4.1.326.2.1.1.1.1.7 |
adapterTransmitQueueLengthThe number of cells in the transmit buffer.ro Gauge32 .1.3.6.1.4.1.326.2.1.1.1.1.8 |
adapterReceiveBufferSizeThe size of the receive buffer, in cells.ro Integer32 .1.3.6.1.4.1.326.2.1.1.1.1.9 |
adapterReceiveQueueLengthThe number of cells in the receive buffer.ro Gauge32 .1.3.6.1.4.1.326.2.1.1.1.1.10 |
adapterOperStatusThe current operational state of the adapter.ro Enumeration .1.3.6.1.4.1.326.2.1.1.1.1.11 |
adapterCarrierThe presence or absence of carrier on the link.ro Enumeration .1.3.6.1.4.1.326.2.1.1.1.1.12 |
adapterAddressThe address of this ATM adapter.ro SpansAddress .1.3.6.1.4.1.326.2.1.1.1.1.13 |
adapterUptimeThe length of time this ATM adapter has been up, in hundredths of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.326.2.1.1.1.1.14 |
adapterPhyLayerThe physical layer of the adapter.ro Enumeration .1.3.6.1.4.1.326.2.1.1.1.1.15 |
adapterTypeThe hardware type of the adapter.ro Enumeration .1.3.6.1.4.1.326.2.1.1.1.1.16 |
adapterFirmwareVersionTextThe version of the ATM adapter firmware. This object provides text information about the internal software configuration that was used when the firmware was built.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.2.1.1.1.1.17 |
adapterSoftwareVersionTextThe version of the ATM adapter software. This object provides text information about the internal software configuration that was used when the ATM adapter software was built.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.2.1.1.1.1.18 |
phyLayerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.2 |
phyLayerTableA table of adapter physical layer information. SEQUENCE OF PhyLayerEntry .1.3.6.1.4.1.326.2.1.2.1 |
phyLayerEntryA table entry containing adapter physical layer information. PhyLayerEntry .1.3.6.1.4.1.326.2.1.2.1.1 |
phyLayerInterfaceThis object identifies the ATM adapter.ro Integer32 .1.3.6.1.4.1.326.2.1.2.1.1.1 |
phyLayerFramingErrorsThe number of ATM cells received with incorrect physical layer framing.ro Counter32 .1.3.6.1.4.1.326.2.1.2.1.1.2 |
phyLayerHeaderCRCErrorsThe number of ATM cells received with bad header CRCs.ro Counter32 .1.3.6.1.4.1.326.2.1.2.1.1.3 |
atmLayerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.3 |
atmLayerTableA table of ATM layer information. SEQUENCE OF AtmLayerEntry .1.3.6.1.4.1.326.2.1.3.1 |
atmLayerEntryA table entry containing ATM layer information. AtmLayerEntry .1.3.6.1.4.1.326.2.1.3.1.1 |
atmInterfaceThis object identifies the ATM interface.ro Integer32 .1.3.6.1.4.1.326.2.1.3.1.1.1 |
atmTransmittedCellsThe number of ATM cells transmitted.ro Counter32 .1.3.6.1.4.1.326.2.1.3.1.1.2 |
atmReceivedCellsThe number of ATM cells received.ro Counter32 .1.3.6.1.4.1.326.2.1.3.1.1.3 |
atmOutOfRangeVPIsThe number of ATM cells received with VPI values that were out of range.ro Counter32 .1.3.6.1.4.1.326.2.1.3.1.1.4 |
atmUnconnectedVPIsThe number of ATM cells received with VPI values that were in range but did not correspond to active connections.ro Counter32 .1.3.6.1.4.1.326.2.1.3.1.1.5 |
atmOutOfRangeVCIsThe number of ATM cells received with VCI values that were out of range.ro Counter32 .1.3.6.1.4.1.326.2.1.3.1.1.6 |
atmUnconnectedVCIsThe number of ATM cells received with VCI values that were in range but did not correspond to active connections.ro Counter32 .1.3.6.1.4.1.326.2.1.3.1.1.7 |
aalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.4 |
aal4TableA table of ATM adaptation layer type 3/4 information. SEQUENCE OF Aal4Entry .1.3.6.1.4.1.326.2.1.4.1 |
aal4EntryA table entry containing ATM adaptation layer type 3/4 information. Aal4Entry .1.3.6.1.4.1.326.2.1.4.1.1 |
aal4InterfaceThis object identifies the ATM interface.ro Integer32 .1.3.6.1.4.1.326.2.1.4.1.1.1 |
aal4TransmittedCellsThe number of AAL type 4 cells transmitted.ro Counter32 .1.3.6.1.4.1.326.2.1.4.1.1.2 |
aal4ReceivedCellsThe number of AAL type 4 cells received.ro Counter32 .1.3.6.1.4.1.326.2.1.4.1.1.3 |
aal4TransmittedPDUsThe number of AAL type 4 protocol data units (PDUs) transmitted.ro Counter32 .1.3.6.1.4.1.326.2.1.4.1.1.4 |
aal4ReceivedPDUsThe number of AAL type 4 protocol data units (PDUs) received.ro Counter32 .1.3.6.1.4.1.326.2.1.4.1.1.5 |
aal4PayloadCRCErrorsThe number of ATM cells received with payload CRC errors.ro Counter32 .1.3.6.1.4.1.326.2.1.4.1.1.6 |
aal4SARProtocolErrorsThe number of ATM cells that the adaptation layer rejected due to SAR layer protocol errors.ro Counter32 .1.3.6.1.4.1.326.2.1.4.1.1.7 |
aal4CSProtocolErrorsThe number of ATM cells that the adaptation layer rejected due to CS layer protocol errors.ro Counter32 .1.3.6.1.4.1.326.2.1.4.1.1.8 |
aal4CellsDiscardsThe number of ATM cells that the adaptation layer discarded in the course of dropping partially reassembled PDUs.ro Counter32 .1.3.6.1.4.1.326.2.1.4.1.1.9 |
aal4PDUsDiscardsThe number of CS-PDUs that the adaptation layer discarded due to queue overflows.ro Counter32 .1.3.6.1.4.1.326.2.1.4.1.1.10 |
aal5TableA table of ATM adaptation layer type 5 information. SEQUENCE OF Aal5Entry .1.3.6.1.4.1.326.2.1.4.2 |
aal5EntryA table entry containing ATM adaptation layer type 5 information. Aal5Entry .1.3.6.1.4.1.326.2.1.4.2.1 |
aal5InterfaceThis object identifies the ATM interface.ro Integer32 .1.3.6.1.4.1.326.2.1.4.2.1.1 |
aal5TransmittedCellsThe number of AAL type 5 cells transmitted.ro Counter32 .1.3.6.1.4.1.326.2.1.4.2.1.2 |
aal5ReceivedCellsThe number of AAL type 5 cells received.ro Counter32 .1.3.6.1.4.1.326.2.1.4.2.1.3 |
aal5TransmittedPDUsThe number of AAL type 5 protocol data units (PDUs) transmitted.ro Counter32 .1.3.6.1.4.1.326.2.1.4.2.1.4 |
aal5ReceivedPDUsThe number of AAL type 5 protocol data units received.ro Counter32 .1.3.6.1.4.1.326.2.1.4.2.1.5 |
aal5CRCErrorsThe number of CS-PDUs received with protocol data unit CRC errors.ro Counter32 .1.3.6.1.4.1.326.2.1.4.2.1.6 |
aal5CSProtocolErrorsThe number of CS-PDUs that the adaptation layer rejected due to CS layer protocol errors.ro Counter32 .1.3.6.1.4.1.326.2.1.4.2.1.7 |
aal5CellsDiscardsThe number of ATM cells that the adaptation layer discarded in the course of dropping partially reassembled PDUs.ro Counter32 .1.3.6.1.4.1.326.2.1.4.2.1.8 |
aal5PDUsDiscardsThe number of CS-PDUs that the adaptation layer discarded.ro Counter32 .1.3.6.1.4.1.326.2.1.4.2.1.9 |
aal0TableA table of ATM adaptation layer type 0 (user defined adaptation layer) information. SEQUENCE OF Aal0Entry .1.3.6.1.4.1.326.2.1.4.3 |
aal0EntryA table entry containing ATM adaptation layer type 0 (user defined adaptation layer) information. Aal0Entry .1.3.6.1.4.1.326.2.1.4.3.1 |
aal0InterfaceThis object identifies the ATM interface.ro Integer32 .1.3.6.1.4.1.326.2.1.4.3.1.1 |
aal0TransmittedCellsThe number of AAL type 0 cells transmitted.ro Counter32 .1.3.6.1.4.1.326.2.1.4.3.1.2 |
aal0ReceivedCellsThe number of AAL type 0 cells received.ro Counter32 .1.3.6.1.4.1.326.2.1.4.3.1.3 |
aal0CellsDiscardsThe number of ATM cells that the adaptation layer discarded in the course of dropping partially reassembled PDUs.ro Counter32 .1.3.6.1.4.1.326.2.1.4.3.1.4 |
connGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.5 |
connTableA table of information about ATM connections. SEQUENCE OF ConnEntry .1.3.6.1.4.1.326.2.1.5.1 |
connEntryA table entry containing information about an ATM connection. ConnEntry .1.3.6.1.4.1.326.2.1.5.1.1 |
connInterfaceThis object identifies the ATM interface.ro Integer32 .1.3.6.1.4.1.326.2.1.5.1.1.1 |
connDirectionThe direction of this connection.ro Enumeration .1.3.6.1.4.1.326.2.1.5.1.1.2 |
connVPIThe Virtual Path Identifier for this connection.ro Integer32 .1.3.6.1.4.1.326.2.1.5.1.1.3 |
connVCIThe Virtual Channel Identifier for this connection.ro Integer32 .1.3.6.1.4.1.326.2.1.5.1.1.4 |
connLocalSAPThe local SAP for this connection.ro Integer32 .1.3.6.1.4.1.326.2.1.5.1.1.5 |
connRemoteSAPThe remote SAP for this connection.ro Integer32 .1.3.6.1.4.1.326.2.1.5.1.1.6 |
connRemoteAddressThe ATM address of the remote end of this connection.ro SpansAddress .1.3.6.1.4.1.326.2.1.5.1.1.7 |
connPeakBandwidthThe peak bandwidth for this connection, in kilobits per second.ro Integer32 .1.3.6.1.4.1.326.2.1.5.1.1.8 |
connMeanBandwidthThe mean bandwidth for this connection, in kilobits per second.ro Integer32 .1.3.6.1.4.1.326.2.1.5.1.1.9 |
connMeanBurstThe mean burst length for this connection, in kilobits.ro Integer32 .1.3.6.1.4.1.326.2.1.5.1.1.10 |
connUptimeThe length of time since this connection was created, in hundredths of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.326.2.1.5.1.1.11 |
sonetGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.6 |
sonetAdapterConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.6.1 |
sonetAdapterStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.6.2 |
statsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.7 |
atmIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.8 |
atmarpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.8.1 |
atmarpFlushTableA SNMP agent will flush the ATM ARP table when this variable is set to enable(2). After the operation is done, the value of this object is disable(1).rw Enumeration .1.3.6.1.4.1.326.2.1.8.1.1 |
atmarpTableA table for ATM ARP information. SEQUENCE OF AtmarpEntry .1.3.6.1.4.1.326.2.1.8.1.2 |
atmarpEntryA table entry containing information about an ATM ARP connection. AtmarpEntry .1.3.6.1.4.1.326.2.1.8.1.2.1 |
atmarpIpAddressThis object identifies the remote IP address for this ATM ARP entry.ro IpAddress .1.3.6.1.4.1.326.2.1.8.1.2.1.1 |
atmarpInterfaceThis object identifies the ATM IP interface (ifIndex) on which this mapping is effective.rw Integer32 .1.3.6.1.4.1.326.2.1.8.1.2.1.2 |
atmarpSpansAddressThis object identifies the remote SPANS address for this ATM ARP entry.ro SpansAddress .1.3.6.1.4.1.326.2.1.8.1.2.1.3 |
atmarpNsapAddressThis object identifies the remote NSAP (Network Service Access Point) for this ATM ARP entry. This object can be used for manually editing the ARP table to include IP to NSAP address mapping for devices that do not support Classical IP ARP.rw NsapAddr .1.3.6.1.4.1.326.2.1.8.1.2.1.4 |
atmarpVPIThe Virtual Path Identifier for this connection.rw Integer32 .1.3.6.1.4.1.326.2.1.8.1.2.1.5 |
atmarpVCIThe Virtual Channel Identifier for this connection.rw Integer32 .1.3.6.1.4.1.326.2.1.8.1.2.1.6 |
atmarpConnTypeThe type of the connection by which the IP address can be reached. The value foreIpPVC(1) indicates the connection is a FORE IP Permanent Virtual Circuit, foreIpSVC(2) indicates it's a FORE IP Switched Virtual Circuit. The value classicalIpPVC(3) indicates the connection is a Classical IP Permanent Virtual Circuit, and the value classicalIpSVC(4) indicates the connection is a Classical IP Switched Virtual Circuit.rw Enumeration .1.3.6.1.4.1.326.2.1.8.1.2.1.7 |
atmarpAALTypeThe type of the AAL (ATM Adaptation Layer) of this connection.rw Enumeration .1.3.6.1.4.1.326.2.1.8.1.2.1.8 |
atmarpPeakBandwidthThe peak bandwidth for this connection, in kilobits per second.rw Integer32 .1.3.6.1.4.1.326.2.1.8.1.2.1.9 |
atmarpConnDirectionThe direction of this connection. The value pending(3) is used for an ATM ARP entry that does not have a connection associated with it.ro Enumeration .1.3.6.1.4.1.326.2.1.8.1.2.1.10 |
atmarpEntryValidityThe validity of this ATM ARP entry. A Classical IP connection entry may be invalid(2) if the remote end of the connection does not answer ARP requests for a while. The entry still exists, but the host is not allowed to send data across it when the entry is in the invalid(2) state.ro Enumeration .1.3.6.1.4.1.326.2.1.8.1.2.1.11 |
atmarpEntryTypeThis object indicates the type of mapping. Dynamic entries are learned from Fore IP or Classical IP mechanisms. Static entries are created manually.ro Enumeration .1.3.6.1.4.1.326.2.1.8.1.2.1.12 |
atmarpEntryStatusThe status of this ATM ARP entry.rw EntryStatus .1.3.6.1.4.1.326.2.1.8.1.2.1.13 |
classicalIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.8.2 |
classicalIpArpTableA table for Classical IP ARP information. SEQUENCE OF ClassicalIpArpEntry .1.3.6.1.4.1.326.2.1.8.2.1 |
classicalIpArpEntryA table entry containing information about Classical IP ARP configuration. ClassicalIpArpEntry .1.3.6.1.4.1.326.2.1.8.2.1.1 |
classicalIpArpIfIndexThe ifIndex corresponding to the ATM interface on which the following classical IP information is configured.ro Integer32 .1.3.6.1.4.1.326.2.1.8.2.1.1.1 |
classicalIpArpServerIndexThe index of the ARP server.ro Integer32 .1.3.6.1.4.1.326.2.1.8.2.1.1.2 |
classicalIpArpServerAn SNMP agent will configure this virtual interface as a Classical IP ARP Server when this variable is set to enable(2).rw Enumeration .1.3.6.1.4.1.326.2.1.8.2.1.1.3 |
classicalIpArpServerConfigTypeThis object identifies the way in which the NSAP (Network Service Access Point) address of the ARP server is determined. When the value of this object is wellKnown(2), the NSAP address of the ARP server is taken from the classicalIpWellKNownArpServerAddr object. When the value of this object is set to manualConfig(1), the NSAP address of the ARP server is read from the classicalIpManualConfigArpServerAddr object.rw Enumeration .1.3.6.1.4.1.326.2.1.8.2.1.1.4 |
classicalIpWellKnownArpServerAddrThis variable holds the well known NSAP (Network Service Access Point) address of the ARP server for this interface.ro NsapAddr .1.3.6.1.4.1.326.2.1.8.2.1.1.5 |
classicalIpManualConfigArpServerAddrThis variable holds the manually configured NSAP (Network Service Access Point) address of the ARP server for this interface. By default this object is set to all zero.rw NsapAddr .1.3.6.1.4.1.326.2.1.8.2.1.1.6 |
ipFilterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.8.3 |
ipFilterConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.8.3.1 |
ipFilterTableA table of authorized ip addresses from which the switch can receive IP packets. SEQUENCE OF IpFilterEntry .1.3.6.1.4.1.326.2.1.8.3.1.1 |
ipFilterEntryA table entry containing ip filter information. IpFilterEntry .1.3.6.1.4.1.326.2.1.8.3.1.1.1 |
ipFilterIpAddressThe authorized IP Address, in the inbound direction. IpAddress .1.3.6.1.4.1.326.2.1.8.3.1.1.1.1 |
ipFilterMaskIndicates the mask to be logical-ANDed with the ipFilterIpAddress to find matching addresses. A mask of 0.0.0.0 is a wild card and matches all addresses. A valid mask is one which has contiguous higher order 1 bits set. That is, mask 255.255.0.128 is not valid while 255.255.0.0 is valid. Example matches: IpAddress Mask means 163.26.54.6 255.255.255.255 Allow address 163.26.54.6 163.54.7.21 255.255.0.0 Allow addresses 163.54.*.* IpAddress .1.3.6.1.4.1.326.2.1.8.3.1.1.1.2 |
ipFilterRowStatusThe status of this ipFilter entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.326.2.1.8.3.1.1.1.3 |
ipFilterNoSSRNoStrictSourceRoute Flag. On implies that IP packets with Strict Source Routed Option set will be dropped. Off implies that these packets will be allowed to pass through, provided they meet with all the other requirements.rw Enumeration .1.3.6.1.4.1.326.2.1.8.3.1.2 |
ipFilterNoLSRNoLooseSourceRoute Flag. On implies that IP packets with Loose Source Routed Option set will be dropped. Off implies that these packets will be allowed to pass through, provided they meet with all the other requirements.rw Enumeration .1.3.6.1.4.1.326.2.1.8.3.1.3 |
ipFilterNoInBandNoInBand Flag. On implies that ALL IP packets from the ATM network will be dropped. Off implies that these packets will be allowed to pass through, provided they meet with all the other requirements.rw Enumeration .1.3.6.1.4.1.326.2.1.8.3.1.4 |
ipFilterStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.1.8.3.2 |
ipFilterStatsIpHeaderThe first 64 bytes of the IP packet which was last dropped.ro IpHeader .1.3.6.1.4.1.326.2.1.8.3.2.1 |
ipFilterStatsTimeOccuredThe sysUptime at which the last IP packet was dropped.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.326.2.1.8.3.2.2 |
ipFilterStatsViolationsThe number of IP packets dropped till the current time.ro Counter32 .1.3.6.1.4.1.326.2.1.8.3.2.3 |
ipFilterStatsVPIThe Virtual Path Identifier corresponding to the connection on which the last IP packet was dropped.ro Integer32 .1.3.6.1.4.1.326.2.1.8.3.2.4 |
ipFilterStatsVCIThe Virtual Channel Identifier corresponding to the connection on which the last IP packet was dropped.ro Integer32 .1.3.6.1.4.1.326.2.1.8.3.2.5 |
ipFilterStatsIfNameName of the interface on which the last dropped IP packet was receivedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.2.1.8.3.2.6 |
ipFilterStatsReasonTextThe reason for dropping the last IP packet to be droppedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.2.1.8.3.2.7 |
ipFilterStatsSrcIpAddrThe IP address contained in the source field of the header of the last IP packet to be droppedro IpAddress .1.3.6.1.4.1.326.2.1.8.3.2.8 |