F3-JDSU-MIB
This module defines the JDSU MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Main OID:
f3JdsuMIB.1.3.6.1.4.1.2544.1.12.31
77
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
77 total| Object Name |
|---|
f3JdsuMIBThis module defines the JDSU MIB definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.31 |
f3JdsuObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.31.1 |
f3JdsuGeneratorPortThis object describes the port which will raise a JDSU discovery.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.1 |
f3JdsuGeneratorOuterVlanEnabledThis object describes whether the filter's Outer Vlan enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.2 |
f3JdsuGeneratorOuterVlanIdThis object describes the filter's Outer VlanId.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.3 |
f3JdsuGeneratorOuterVlanPriThis object describes the filter's Outer Vlan Priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.4 |
f3JdsuGeneratorOuterVlanEtherTypeThis object describes the filter's Outer Vlan Ether Type.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.31.1.5 |
f3JdsuGeneratorInnerVlan1EnabledThis object describes whether the filter's Inner Vlan1 enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.6 |
f3JdsuGeneratorInnerVlan1IdThis object describes the filter's Inner Vlan1 ID.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.7 |
f3JdsuGeneratorInnerVlan1PriThis object describes the filter's Inner Vlan1 Priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.8 |
f3JdsuGeneratorInnerVlan1EtherTypeThis object describes the filter's Inner Vlan1 Ether Type.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.31.1.9 |
f3JdsuGeneratorInnerVlan2EnabledThis object describes whether the filter's Inner Vlan2 enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.10 |
f3JdsuGeneratorInnerVlan2IdThis object describes the filter's Inner Vlan2 ID.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.11 |
f3JdsuGeneratorInnerVlan2PriThis object describes the filter's Inner Vlan2 Priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.12 |
f3JdsuGeneratorInnerVlan2EtherTypeThis object describes the filter's Inner Vlan2 Ether Type.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.31.1.13 |
f3JdsuGeneratorFrameTypeThis object describe the filter's frame type.
Its default value is 802.3.rw JdsuGeneratorFrameType .1.3.6.1.4.1.2544.1.12.31.1.14 |
f3JdsuGeneratorPayloadTypeIndicates the type of payload the remaining test frame shall contain,
either fixed (incremental bytes or repeated bytes) or random
(according to IEEE short continuous random test pattern).
Default is random. This payload starts after the Ethernet frame
header (including all VLAN tags).rw JdsuGeneratorPayloadType .1.3.6.1.4.1.2544.1.12.31.1.15 |
f3JdsuGeneratorFrameLengthIndicates the length of the frame which shall be injected,
The size range for all ports is from 64 to 9600.rw Integer32 .1.3.6.1.4.1.2544.1.12.31.1.16 |
f3JdsuGeneratorDiscoveryActionIndicates the discovery action on the JDSU generator.rw DiscoveryAction .1.3.6.1.4.1.2544.1.12.31.1.17 |
f3JdsuGeneratorDiscoverTableA list of entries corresponding to JDSU Generator Discover Information. SEQUENCE OF F3JdsuGeneratorDiscoverEntry .1.3.6.1.4.1.2544.1.12.31.1.18 |
f3JdsuGeneratorDiscoverEntryA conceptual row in the f3JdsuGeneratorDiscoverTable. F3JdsuGeneratorDiscoverEntry .1.3.6.1.4.1.2544.1.12.31.1.18.1 |
f3JdsuGeneratorDiscoverDestMacAddrThis object describes the destination MAC address for the test frames. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.18.1.1 |
f3JdsuGeneratorDiscoverOuterVlanEnabledThis object describes whether the filter's Outer Vlan enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.18.1.2 |
f3JdsuGeneratorDiscoverOuterVlanIdThis object describes the filter's Outer Vlan ID.ro VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.18.1.3 |
f3JdsuGeneratorDiscoverOuterVlanPriThis object describes the filter's Outer Vlan Priority.ro VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.18.1.4 |
f3JdsuGeneratorDiscoverOuterVlanEtherTypeThis object describe the filter's Outer Vlan Ether Type.ro Integer32 .1.3.6.1.4.1.2544.1.12.31.1.18.1.5 |
f3JdsuGeneratorDiscoverInnerVlan1EnabledThis object describes whether the filter's Inner Vlan1 enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.18.1.6 |
f3JdsuGeneratorDiscoverInnerVlan1IdThis object describe the filter's Inner Vlan1 ID.ro VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.18.1.7 |
f3JdsuGeneratorDiscoverInnerVlan1PriThis object describes the filter's Inner Vlan1 Priority.ro VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.18.1.8 |
f3JdsuGeneratorDiscoverInnerVlan1EtherTypeThis object describes the filter's Inner Vlan1 Ether Type.ro Integer32 .1.3.6.1.4.1.2544.1.12.31.1.18.1.9 |
f3JdsuGeneratorDiscoverInnerVlan2EnabledThis object describes whether the filter's Inner Vlan2 enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.18.1.10 |
f3JdsuGeneratorDiscoverInnerVlan2IdThis object describes the filter's Inner Vlan2 ID.ro VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.18.1.11 |
f3JdsuGeneratorDiscoverInnerVlan2PriThis object describes the filter's Inner Vlan2 Priority.ro VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.18.1.12 |
f3JdsuGeneratorDiscoverInnerVlan2EtherTypeThis object describes the filter's Inner Vlan2 Ether Type.ro Integer32 .1.3.6.1.4.1.2544.1.12.31.1.18.1.13 |
f3JdsuGeneratorDiscoverFrameTypeThis object describes the filter's frame type.
Its default value is 802.3.ro JdsuGeneratorFrameType .1.3.6.1.4.1.2544.1.12.31.1.18.1.14 |
f3JdsuGeneratorDiscoverPayloadTypeIndicates the type of payload the remaining test frame shall contain,
either fixed (incremental bytes or repeated bytes) or random
(according to IEEE short continuous random test pattern).
Default is random. This payload starts after the Ethernet frame
header (including all VLAN tags).ro JdsuGeneratorPayloadType .1.3.6.1.4.1.2544.1.12.31.1.18.1.15 |
f3JdsuGeneratorDiscoverFrameLengthIndicates the length of the frame which shall be injected,
The size range for all ports is from 64 to 9600.rw Integer32 .1.3.6.1.4.1.2544.1.12.31.1.18.1.16 |
f3JdsuGeneratorDiscoverUnitTextIdIndicates the string from remote device. Normally it is system name of remote device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.18.1.17 |
f3JdsuGeneratorDiscoverIfReachableIndicate whether the mac can be discovered or not exactly.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.18.1.18 |
f3JdsuGeneratorDiscoverGeneratorStatusIndicates the generator status.ro GeneratorStatus .1.3.6.1.4.1.2544.1.12.31.1.18.1.19 |
f3JdsuGeneratorDiscoverItemOperationaction save the discoverd items.rw ItemOperation .1.3.6.1.4.1.2544.1.12.31.1.18.1.20 |
f3JdsuGeneratorDiscoverItemIfSavedIndicates whether the discoverd item saved status.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.18.1.21 |
f3JdsuGeneratorDiscoverGeneratorActionIndicates looup or lookdown action.rw GeneratorAction .1.3.6.1.4.1.2544.1.12.31.1.18.1.22 |
f3JdsuGeneratorConfigureTableA list of entries corresponding to JDSU Generator Configure Information. SEQUENCE OF F3JdsuGeneratorConfigureEntry .1.3.6.1.4.1.2544.1.12.31.1.19 |
f3JdsuGeneratorConfigureEntryA conceptual row in the f3JdsuGeneratorConfigureTable. F3JdsuGeneratorConfigureEntry .1.3.6.1.4.1.2544.1.12.31.1.19.1 |
f3JdsuGeneratorConfigureDestMacAddrThis object describes the destination MAC address for the test frames. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.19.1.1 |
f3JdsuGeneratorConfigureOuterVlanEnabledThis object describes whether the filter's Outer Vlan enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.19.1.2 |
f3JdsuGeneratorConfigureOuterVlanIdThis object describes the filter's Outer Vlan ID.ro VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.19.1.3 |
f3JdsuGeneratorConfigureOuterVlanPriThis object describes the filter's Outer Vlan Priority.ro VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.19.1.4 |
f3JdsuGeneratorConfigureOuterVlanEtherTypeThis object describes the filter's Outer Vlan Ether Type.ro Integer32 .1.3.6.1.4.1.2544.1.12.31.1.19.1.5 |
f3JdsuGeneratorConfigureInnerVlan1EnabledThis object describes whether the filter's Inner Vlan1 enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.19.1.6 |
f3JdsuGeneratorConfigureInnerVlan1IdThis object describes the filter's Inner Vlan1 ID.ro VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.19.1.7 |
f3JdsuGeneratorConfigureInnerVlan1PriThis object describes the filter's Inner Vlan1 Priority.ro VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.19.1.8 |
f3JdsuGeneratorConfigureInnerVlan1EtherTypeThis object describes the filter's Inner Vlan1 Ether Type.ro Integer32 .1.3.6.1.4.1.2544.1.12.31.1.19.1.9 |
f3JdsuGeneratorConfigureInnerVlan2EnabledThis object describes whether the filter's Inner Vlan2 enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.19.1.10 |
f3JdsuGeneratorConfigureInnerVlan2IdThis object describes the filter's Inner Vlan2 ID.ro VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.19.1.11 |
f3JdsuGeneratorConfigureInnerVlan2PriThis object describes the filter's Inner Vlan2 Priority.ro VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.31.1.19.1.12 |
f3JdsuGeneratorConfigureInnerVlan2EtherTypeThis object describes the filter's Inner Vlan2 Ether Type.ro Integer32 .1.3.6.1.4.1.2544.1.12.31.1.19.1.13 |
f3JdsuGeneratorConfigureFrameTypeThis object describes the filter's frame type.
Its default value is 802.3.ro JdsuGeneratorFrameType .1.3.6.1.4.1.2544.1.12.31.1.19.1.14 |
f3JdsuGeneratorConfigurePayloadTypeIndicates the type of payload the remaining test frame shall contain,
either fixed (incremental bytes or repeated bytes) or random
(according to IEEE short continuous random test pattern).
Default is random. This payload starts after the Ethernet frame
header (including all VLAN tags).ro JdsuGeneratorPayloadType .1.3.6.1.4.1.2544.1.12.31.1.19.1.15 |
f3JdsuGeneratorConfigureFrameLengthIndicates the length of the frame which shall be injected,
The size range for all ports is from 64 to 9600.rw Integer32 .1.3.6.1.4.1.2544.1.12.31.1.19.1.16 |
f3JdsuGeneratorConfigureUnitTextIdIndicates the string from remote device. Normally it is system name of remote device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.19.1.17 |
f3JdsuGeneratorConfigureIfReachableIndicates whether the mac can be Configureed or not exactly.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.19.1.18 |
f3JdsuGeneratorConfigureReachableUpdateAction on update the reachable status of the related item.rw UpdateReachStatus .1.3.6.1.4.1.2544.1.12.31.1.19.1.19 |
f3JdsuGeneratorConfigureStatusIndicates the generator status exactly.ro GeneratorStatus .1.3.6.1.4.1.2544.1.12.31.1.19.1.20 |
f3JdsuGeneratorConfigureGeneratorActionIndicates JDSU Generator lookup or lookdown action.rw GeneratorAction .1.3.6.1.4.1.2544.1.12.31.1.19.1.21 |
f3JdsuGeneratorConfigureStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.19.1.22 |
f3JdsuGeneratorConfigureRowStatusThe status of this row.
Note: one row can be deleted by set this item as destoryed.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.19.1.23 |
f3EthernetTrafficPortJdsuExtTableA list of entries corresponding to Ethernet Traffic Port
Facilities for JDSU configuration purposes. SEQUENCE OF F3EthernetTrafficPortJdsuExtEntry .1.3.6.1.4.1.2544.1.12.31.1.20 |
f3EthernetTrafficPortJdsuExtEntryA conceptual row in the cmEthernetTrafficPortJdsuExtTable. F3EthernetTrafficPortJdsuExtEntry .1.3.6.1.4.1.2544.1.12.31.1.20.1 |
f3EthernetTrafficPortJdsuLoopbackEnabledEnabled: reaction/response to JDSU in-band loopback requests and hallo requests.
Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests.
FPGA shall not filter the JDSU control frames to processor.
From enabled to disabled, if there is already a JDSU loopback on the port,
release current loopback.
JDSU loopback doesn't need port in maintenance state.
When JDSU Generation Enabled, this attribute can't be enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.20.1.1 |
f3EthernetTrafficPortJdsuGenerationEanbledThis object describes whether the user would to raise a JDSU discovery action.
When JDSU Loopback Enabled, this attribute cann't be enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.20.1.2 |
f3EthernetTrafficPortJdsuLoopbackVlanListIn EG-X, up to 12 loopback can be supported and also up to 2 layer VLAN can be supported.
The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2,
OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-*;2-*, 3-*, 4-*;5-*').ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.31.1.20.1.3 |
f3JdsuNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.31.2 |
f3JdsuConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.31.3 |
f3JdsuCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.31.3.1 |
f3JdsuGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.31.3.2 |