EXTREME-SNMPV3-MIB
AI MIB Summary
The EXTREME-SNMPV3-MIB module defines vendor-specific SNMPv3 objects for Extreme Networks devices to configure and monitor security parameters, including authentication, encryption, and access control settings. It enables the management of SNMPv3 user profiles, security levels, and view-based access control lists (VACM) to secure management traffic on Extreme switches and routers.
Extreme-specific SNMPv3 objects
Main OID:
extremeSnmpv3.1.3.6.1.4.1.1916.1.23
14
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
extremeSnmpv3Extreme-specific SNMPv3 objects MODULE-IDENTITY .1.3.6.1.4.1.1916.1.23 |
extremeTarget OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.23.1 |
extremeTargetAddrExtTableThis table is an extension to the snmpTargetAddrTable found in the
SNMP-TARGET-MIB. It contains Extreme Networks specific objects needed for
each management target. SEQUENCE OF ExtremeTargetAddrExtEntry .1.3.6.1.4.1.1916.1.23.1.1 |
extremeTargetAddrExtEntryAn entry in the extremeTargetAddrExtTable. ExtremeTargetAddrExtEntry .1.3.6.1.4.1.1916.1.23.1.1.1 |
extremeTargetAddrExtIgnoreMPModelWhen this object is set to TRUE, the version of the trap/notification sent to
the corresponding management target (trap receiver) will be the same as in
releases of Extremeware prior to 7.1.0. Thus, the value of the
snmpTargetParamsMPModel object in the snmpTargetParamsTable will be ignored while
determining the version of the trap/notification to be sent. When a trap-receiver
is created via the RMON trapDestTable or from the CLI command 'configure snmp add
trapreceiver ....', the value of this object will be set to TRUE for the
corresponding entry in this table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.23.1.1.1.1 |
extremeTargetAddrExtStandardModeWhen this object is set to TRUE, the management target will be treated as
a 'standard mode' one, in that any Extreme Networks specific extra varbinds
present in a standards-based trap/notification will not be sent to this
management target. Only the varbinds defined in the standard will be sent.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.23.1.1.1.2 |
extremeTargetAddrExtTrapDestIndexThis object contains the value of the trapDestIndex in the corresponding
entry of the RMON trapDestTable.ro Integer32 .1.3.6.1.4.1.1916.1.23.1.1.1.3 |
extremeTargetAddrExtUseEventCommThis object is used only when sending RMON alarms as SNMPv3 traps.
When it is set to TRUE and an RMON risingAlarm or fallingAlarm is being sent
for an event, then the eventCommunity in the RMON event table is compared to
the snmpTargetAddrName in the snmpTargetAddrTable. The alarm is sent to the
target only when the two are the same. This behavior is exhibited only when the
snmpTargetParamsMPModel corresponding to the target indicates an SNMPv3 trap. For
SNMPv1/v2c traps, the community in the RMON trapDestTable is used for the
comparision, which is the 'regular' method, as per the standards.
When this object is set to FALSE, then the RMON alarm (if being sent as an SNMPv3
trap) is sent without using the event community for any comparision.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.23.1.1.1.4 |
extremeTargetAddrExtTrapSrcIpThis object contains the source IP address from which traps have to be sent out.
If this object is assigned an IP address that does not belong to the switch,
an error is thrown.rw IpAddress .1.3.6.1.4.1.1916.1.23.1.1.1.5 |
extremeTargetAddrExtVrNameThis object contains the virtual router name through which the SNMP Traps are being sent out. If extremeTargetAddrExtVrName is not specified then the SNMP Traps will be sent out through either VR-Mgmt or VR-Default.rw DisplayString .1.3.6.1.4.1.1916.1.23.1.1.1.6 |
extremeUsm OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.23.2 |
extremeUsm3DESPrivProtocolThe 3DES-EDE Symmetric Encryption Protocol. This is the protocol
as specified in draft-reeder-snmpv3-usm-3desede-00. OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.23.2.1 |
extremeUsmAesCfb192ProtocolThe CFB128-AES-192 Privacy Protocol. OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.23.2.2 |
extremeUsmAesCfb256ProtocolThe CFB128-AES-256 Privacy Protocol. OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.23.2.3 |