EXTREME-SYSTEM-MIB
Extreme System objects: objects common to all platforms
Main OID:
extremeSystem.1.3.6.1.4.1.1916.1.1
179
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
179 total| Object Name |
|---|
extremeSystemExtreme System objects: objects common to all platforms MODULE-IDENTITY .1.3.6.1.4.1.1916.1.1 |
SNMPv2-SMIExtreme System objects: objects common to all platforms Unknown .1.3.6.1.4.1.1916.1.1 |
extremeSystemCommon OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.1 |
extremeSaveConfigurationWhen this object is set, the device will copy the contents
of the configuration database to a buffer and save it to the
persistant store specified by the value of the object. The
save is performed asynchronously, and the snmp agent will
continue to respond to both gets and sets while the save is
taking place. A network management application may use the
extremeSaveStatus object to determine when the asynchronous
save operation has completed.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.3 |
extremeSaveStatusThis object will return the status of a save operation invoked
by setting the extremeSaveConfiguration object. A network
management application can read this object to determine that a
save operation has completed.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.4 |
extremeCurrentConfigInUseShows which NVRAM configuration store was used at last boot.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.5 |
extremeConfigToUseOnRebootControls which NVRAM configuration store will be used
on next reboot.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.6 |
extremeOverTemperatureAlarmAlarm status of overtemperature sensor in device
enclosure.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.7 |
extremeCurrentTemperatureCurrent temperature in degrees celcius measured inside
device enclosure.ro INTEGER .1.3.6.1.4.1.1916.1.1.1.8 |
extremeFanStatusTableTable of operational status of all internal cooling fans. SEQUENCE OF ExtremeFanStatusEntry .1.3.6.1.4.1.1916.1.1.1.9 |
extremeFanStatusEntryEntry in table of all internal cooling fans. ExtremeFanStatusEntry .1.3.6.1.4.1.1916.1.1.1.9.1 |
extremeFanNumberIdentifier of cooling fan, numbered from the front and/or
left side of device.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.9.1.1 |
extremeFanOperationalOperational status of a cooling fan.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.9.1.2 |
extremeFanEntPhysicalIndexThe entity index for this fan entity in the entityPhysicalTable table of the
entity MIB.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.9.1.3 |
extremeFanSpeedThe speed (RPM) of a cooling fan in the fantray.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.9.1.4 |
extremePrimaryPowerOperationalOperational status of internal power supply of a device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.10 |
extremeRedundantPowerStatusOperational status of an external redundant power supply to a device.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.11 |
extremeRedundantPowerAlarmAlarm state of an external redundant power supply to a device.
Alarm state indicates either fan failure or overtemperature
condition.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.12 |
extremePrimarySoftwareRevThe software revision of the primary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be reported in RMON2 probeSoftwareRev if this
is the software image currently running in the device.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.13 |
extremeSecondarySoftwareRevThe software revision of the secondary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be reported in RMON2 probeSoftwareRev if this
is the software image currently running in the device.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.14 |
extremeImageToUseOnRebootControls which image will be used
on next reboot.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.15 |
extremeSystemIDThis represents the System ID of the Summit Switch.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.16 |
extremeSystemBoardIDThis represents the Board ID of the Summit Switch.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.17 |
extremeSystemLeftBoardIDThis represents the Left Board ID of the Summit Switch.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.18 |
extremeSystemRightBoardIDThis represents the Right Board ID of the Summit Switch.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.19 |
extremeInputPowerVoltageThe input power voltage at which the system is currently operating.ro PowerValue .1.3.6.1.4.1.1916.1.1.1.20 |
extremePowerStatusOperational status of the power supply to a device.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.21 |
extremePowerAlarmAlarm state of the power supply to a device.
Alarm state indicates either fan failure or overtemperature
condition.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.22 |
extremeRmonEnableSetting this to true will cause the agent to
start collecting RMON statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.23 |
extremeBootROMVersionThe software revision of the bootrom on the device.
This string will have a zero length if the revision is
unknown or invalid.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.25 |
extremeDot1dTpFdbTableEnableSetting this to true will cause GetNext operations on the dot1dTpFdbTable to be allowed. Note that Get operations are always allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.26 |
extremePowerSupplyTableTable of status of all power supplies in the system. SEQUENCE OF ExtremePowerSupplyEntry .1.3.6.1.4.1.1916.1.1.1.27 |
extremePowerSupplyEntryAn entry indicating the status of a specific power supply. ExtremePowerSupplyEntry .1.3.6.1.4.1.1916.1.1.1.27.1 |
extremePowerSupplyNumberPower supply number.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.27.1.1 |
extremePowerSupplyStatusStatus of the power supply.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.27.1.2 |
extremePowerSupplyInputVoltageInput voltage of the power supplyro PowerValue .1.3.6.1.4.1.1916.1.1.1.27.1.3 |
extremePowerSupplySerialNumberThe serial number of the power supply unit.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.27.1.4 |
extremePowerSupplyEntPhysicalIndexThe entity index for this psu entity in the entityPhysicalTable
of the entity MIB.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.27.1.5 |
extremePowerSupplyFan1SpeedThe speed (RPM) of Fan-1 in the power supply unit.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.27.1.6 |
extremePowerSupplyFan2SpeedThe speed (RPM) of Fan-2 in the power supply unit.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.27.1.7 |
extremePowerSupplySourceThe power supply unit input source.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.27.1.8 |
extremePowerSupplyInputPowerUsageInput power usage for the given psu slot. The value 0 in this field indicate the power usage is not supported or read failure.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.27.1.9 |
extremePowerMonSupplyNumOutputNumber of output sensors in the power supply unitro Integer32 .1.3.6.1.4.1.1916.1.1.1.27.1.10 |
extremePowerSupplyInputPowerUsageUnitMultiplierThe magnitude of watts for the usage value in extremePowerSupplyInputPowerUsage.ro UnitMultiplier .1.3.6.1.4.1.1916.1.1.1.27.1.11 |
extremeCpuAggregateUtilizationThe aggregate CPU utilization since
the time the start started executing.rodeprecated Integer32 .1.3.6.1.4.1.1916.1.1.1.28 |
extremeCpuTask2TableTable of CPU tasks that are active.deprecated SEQUENCE OF ExtremeCpuTask2Entry .1.3.6.1.4.1.1916.1.1.1.29 |
extremeCpuTask2EntryAn entry in table of describes a single task.deprecated ExtremeCpuTask2Entry .1.3.6.1.4.1.1916.1.1.1.29.1 |
extremeCpuTask2CpuIdCPU on which this task last executed or is executing.
The primary CPU has a value of 1.deprecated Unsigned32 .1.3.6.1.4.1.1916.1.1.1.29.1.1 |
extremeCpuTask2NameName associated with the reported task id.deprecated DisplayString .1.3.6.1.4.1.1916.1.1.1.29.1.2 |
extremeCpuTask2IdTask identifier assigned by the operating system when
this task is spawned.rodeprecated Unsigned32 .1.3.6.1.4.1.1916.1.1.1.29.1.3 |
extremeCpuTask2PcThe value of the program counter for this task.
It indicates the address of the next instruction
that would be executed once the operating system
resumes this task.rodeprecated Unsigned32 .1.3.6.1.4.1.1916.1.1.1.29.1.4 |
extremeCpuTask2StatusThe current status of the task as reported by the
operating system.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.29.1.5 |
extremeCpuTask2UtilizationThe current CPU utilization by this task. This
is the utilization when the task last executed.rodeprecated Unsigned32 .1.3.6.1.4.1.1916.1.1.1.29.1.6 |
extremeCpuTask2MaxUtilizationThe maximum CPU utilization by this task since
the time the start started executing. This value
may be cleared.rwdeprecated Unsigned32 .1.3.6.1.4.1.1916.1.1.1.29.1.7 |
extremeAuthFailSrcAddrThe IP address of the originator of the bad SNMP
request that caused the generation of an authentication
failure trap.ro IpAddress .1.3.6.1.4.1.1916.1.1.1.30 |
extremeCpuTransmitPriorityThe CPU transmit priority.rwdeprecated Enumeration .1.3.6.1.4.1.1916.1.1.1.31 |
extremeImageBootedThe image with which the switch was last booted, using which it is currently running.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.32 |
extremeMsmFailoverCauseThe cause of the last MSM failover. never(1) means an
MSM Failover has not occurred since the last reboot.
admin(2) means the failover was initiated by the user.
exception(3) means the former master MSM encountered a
software exception condition. removal(4) means the master
MSM was physically removed from the chassis. hwFailure(5)
means a diagnostic failure was detected in the master MSM.
watchdog(6) means that the master MSM hardware watchdog
timer expired. keepalive(7) means the master MSM failed to
respond to slave keepalive requests. The MSM failover will
have been hitless only in the admin(2) and exception(3)
casesro Enumeration .1.3.6.1.4.1.1916.1.1.1.33 |
extremeImageTableA table containing information about each software image. SEQUENCE OF ExtremeImageEntry .1.3.6.1.4.1.1916.1.1.1.34 |
extremeImageEntryA table entry containing information about each software image. ExtremeImageEntry .1.3.6.1.4.1.1916.1.1.1.34.1 |
extremeImageNumberA unique integer identifying the particular software
image.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.34.1.1 |
extremeMajorVersionThe ExtremeWare Release Major Version.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.34.1.2 |
extremeSubMajorVersionThe ExtremeWare Release Sub-major Version.rodeprecated Integer32 .1.3.6.1.4.1.1916.1.1.1.34.1.3 |
extremeMinorVersionThe ExtremeWare Release Minor Version.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.34.1.4 |
extremeBuildNumberThe ExtremeWare Build Number.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.34.1.5 |
extremeTechnologyReleaseNumberThe Technology Release version. This value is zero for
all but TR releases.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.34.1.6 |
extremeSustainingReleaseNumberThe Sustaining Release number for the ExtremeWare version.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.34.1.7 |
extremeBranchRevisionNumberThe incremental build on specified branch.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.34.1.8 |
extremeImageTypeThe branch type from which the image was built.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.34.1.9 |
extremeImageDescriptionA unique string that can be used to identify the specific patch,
technology, or development branch release.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.34.1.10 |
extremeImageSecurityIndicates whether image was built with ssh. This object
is deprecated, the ssh capability can be obtained from
the extremeImageSshCapability of the ImageFeatureTablerodeprecated Enumeration .1.3.6.1.4.1.1916.1.1.1.34.1.11 |
extremePatchVersionThe ExtremeWare Release Patch Version.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.34.1.12 |
extremeImageFeatureTableA table containing information about the software features. SEQUENCE OF ExtremeImageFeatureEntry .1.3.6.1.4.1.1916.1.1.1.35 |
extremeImageFeatureEntryA table entry containing information about software features. ExtremeImageFeatureEntry .1.3.6.1.4.1.1916.1.1.1.35.1 |
extremeImageFeatureNumberA unique integer identifying the particular software
image.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.35.1.1 |
extremeImageSshCapabilityIndicates whether image has ssh capability.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.35.1.2 |
extremeImageUAACapabilityIndicates whether image has Wireless(UAA) components.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.35.1.3 |
extremeSystemPowerStateThe current state of power available.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.36 |
extremeBootTimeThe boot time expressed in standard time_t value.
When interpreted as an absolute time value, it
represents the number of seconds elapsed since 00:00:00
on January 1, 1970, Coordinated Universal Time (UTC)ro Counter64 .1.3.6.1.4.1.1916.1.1.1.37 |
extremePowerSupplyOutputPowerTableThe output power supply table per power supply unit. SEQUENCE OF ExtremePowerSupplyOutputPowerEntry .1.3.6.1.4.1.1916.1.1.1.38 |
extremePowerSupplyOutputPowerEntryAn entry in the power supply output table. ExtremePowerSupplyOutputPowerEntry .1.3.6.1.4.1.1916.1.1.1.38.1 |
extremePowerSupplyIndexPower supply unit slot indexro Integer32 .1.3.6.1.4.1.1916.1.1.1.38.1.1 |
extremePowerSupplyOutputSensorIdxPower supply Sensor Indexro Integer32 .1.3.6.1.4.1.1916.1.1.1.38.1.2 |
extremePowerSupplyOutputVoltageOutput voltage per sensor for the current psu slot no.
0 in this field tells the psu doesnt support output voltage reading or output voltage read error.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.38.1.3 |
extremePowerSupplyOutputCurrentOutput current per sensor for the current psu slot no.
0 in this field tells the psu doesnt support output current reading or output current read error.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.38.1.4 |
extremePowerSupplyOutputUnitMultiplierThe magnitude of volts and amps for the usage value in extremePowerSupplyOutputVoltage and
extremePowerSupplyOutputCurrent.ro UnitMultiplier .1.3.6.1.4.1.1916.1.1.1.38.1.5 |
extremePowerSupplyUsageTableThe power supply usage on each slot. SEQUENCE OF ExtremePowerSupplyUsageEntry .1.3.6.1.4.1.1916.1.1.1.39 |
extremePowerSupplyUsageEntryAn entry in the power supply usage table. ExtremePowerSupplyUsageEntry .1.3.6.1.4.1.1916.1.1.1.39.1 |
extremeSlotIndexSlot number in the chassis/stack based system.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.39.1.1 |
extremePowerSupplyUsageValuePower Usage of the particular slot in the chassis or stack.The power usage is measured in milli-watts.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.39.1.2 |
extremePowerSupplyUnitMultiplierThe magnitude of watts for the usage value in extremePowerSupplyUsageValue.ro UnitMultiplier .1.3.6.1.4.1.1916.1.1.1.39.1.3 |
extremeSystemPowerUsage OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.1.40 |
extremeSystemPowerUsageValueThe current power usage of the system.In stack mode this variables tells total power usage
of the entire system.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.40.1 |
extremeSystemPowerUsageUnitMultiplierThe magnitude of watts for the usage value in extremeSystemPowerUsageValue.ro UnitMultiplier .1.3.6.1.4.1.1916.1.1.1.40.2 |
extremeSystemPowerMonitorTableThe output power supply table per power supply unit. SEQUENCE OF ExtremeSystemPowerMonitorEntry .1.3.6.1.4.1.1916.1.1.1.41 |
extremeSystemPowerMonitorEntryAn entry in the power supply output table. ExtremeSystemPowerMonitorEntry .1.3.6.1.4.1.1916.1.1.1.41.1 |
extremeSystemPowerMonitorIndex1Reserved can be used for future expansion. currently set to zero.ro Integer32 .1.3.6.1.4.1.1916.1.1.1.41.1.1 |
extremeSystemPowerMonitorPollIntervalConfigure how often input power is measured. it is configured in seconds. default value is 60 seconds.
if 0 is configured then the input power measurement is disabledrw INTEGER .1.3.6.1.4.1.1916.1.1.1.41.1.2 |
extremeSystemPowerMonitorReportChangesconfigure report-changes has none or log or trap or log-and-trap, by default none is configuredrw Enumeration .1.3.6.1.4.1.1916.1.1.1.41.1.3 |
extremeSystemPowerMonitorChangeThresholdconfigure input power change-threshold to initiate report-changes action.
By default 2 watts is configured, this field is configured in watts.rw Integer32 .1.3.6.1.4.1.1916.1.1.1.41.1.4 |
extremeRebootTableThis group of objects use to initiate a device reboot or
contain details of the last reboot operation of the switch
modules or nodes. SEQUENCE OF RebootTimeEntry .1.3.6.1.4.1.1916.1.1.1.42 |
rebootTimeEntryThis group of objects use to initiate a device reboot or
contain details of the last reboot operation of the switch
modules or nodes. RebootTimeEntry .1.3.6.1.4.1.1916.1.1.1.42.1 |
extremeRebootSlotIdSpecifies the MSM/MM module number of a switch or the slot number currently being
used by the active stack node.ro INTEGER .1.3.6.1.4.1.1916.1.1.1.42.1.1 |
extremeRebootNodeAddressSpecifies the MAC address of the SummitStack node to be rebooted.
NOTE: This object is valid only for Summit X250e and X450
series switches, and SummitStack.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.42.1.2 |
extremeRebootModuleSlotIdSpecifies A or B for an MSM/MM module.
- A specifies the MSM/MM installed in slot A.
- B specifies the MSM/MM installed in slot B.
Note: The modules that can be rebooted are management switch fabric
modules(MSM) and management modules(MM). This object is valid only
on modular switches.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.42.1.3 |
extremeRebootSlotNumberSpecifies the slot number currently being used by the active stack
node that is to be rebooted.
Note: This variable is available only on SummitStack.rw Integer32 .1.3.6.1.4.1.1916.1.1.1.42.1.4 |
extremeRebootAsStandbySpecifies that all stack nodes that are to be rebooted
are to operate as if configured to not be master-capable.
NOTE: This object is valid only for Summit X250e
and X450 series switches and SummitStack.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.42.1.5 |
extremeRebootStackTopologySpecifies that the entire SummitStack is to be rebooted
whether or not nodes are active.
NOTE: This object is valid only for Summit X250e and
X450 series switches and SummitStack.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.42.1.6 |
extremeRebootMonthSpecifies the month that the reboot is scheduled to start.rw INTEGER .1.3.6.1.4.1.1916.1.1.1.42.1.7 |
extremeRebootDaySpecifies the day that the reboot is scheduled to start.rw INTEGER .1.3.6.1.4.1.1916.1.1.1.42.1.8 |
extremeRebootYearSpecifies the year that the reboot is scheduled to start.rw INTEGER .1.3.6.1.4.1.1916.1.1.1.42.1.9 |
extremeRebootHourSpecifies the hour that the reboot is scheduled to start.rw INTEGER .1.3.6.1.4.1.1916.1.1.1.42.1.10 |
extremeRebootMinuteSpecifies the number of minutes that the reboot is scheduled to start.rw INTEGER .1.3.6.1.4.1.1916.1.1.1.42.1.11 |
extremeRebootSecondsSpecifies the number of seconds that the reboot is scheduled to start.rw INTEGER .1.3.6.1.4.1.1916.1.1.1.42.1.12 |
extremeRebootCancelCancels a previously scheduled reboot.
Note: This object, when enabled, override all objects associated with
a reboot request.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.42.1.13 |
extremeRebootImmediateIndicates that a reboot should be executed on the target device immediately.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.42.1.14 |
extremeRebootRowStatusThe existence state of this reboot request. This object
follows the row status behavior.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.42.1.15 |
extremeDownloadImageTableThis group of objects contain details of the last
or the current download image operation of the switch
modules or nodes. SEQUENCE OF ExtremeDownloadImageEntry .1.3.6.1.4.1.1916.1.1.1.43 |
extremeDownloadImageEntryThis group of objects contain details of the last
or the current download image operation of one of the switch
modules or nodes. ExtremeDownloadImageEntry .1.3.6.1.4.1.1916.1.1.1.43.1 |
extremeDownloadImageSlotIdSpecifies the MSM/MM module number of a switch or the slot number currently being
used by the active stack node.rw INTEGER .1.3.6.1.4.1.1916.1.1.1.43.1.1 |
extremeDownloadImageStatusSpecifies the status of the current down load operation.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.43.1.2 |
extremeDownloadImageFilenameSpecifies the file name of the downloading EXOS image.rw DisplayString .1.3.6.1.4.1.1916.1.1.1.43.1.3 |
extremeDownloadImagePartitionSpecifies which partition the image should be saved
to primary or secondary. Select primary to save the
image to the primary partition and secondary to save
the image to the secondary partition.
Note: Beginning with ExtremeXOS 12.1, an ExtremeXOS core
image must be installed on the alternate (nonactive)
partition. If a user tries to install on an active partition,
the error message [Error: Image can only be installed
to the non-active partition.] is displayed.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.43.1.4 |
extremeDownloadImageHostNameSpecifies the hostname of the TFTP server from which the
image should be obtained.rw DisplayString .1.3.6.1.4.1.1916.1.1.1.43.1.5 |
extremeDownloadImageIpaddressSpecifies the IP address of the TFTP server from which the
image should be obtained.rw DisplayString .1.3.6.1.4.1.1916.1.1.1.43.1.6 |
extremeDownloadImageStartTimeSpecifies the start time (date and time) of the current down load operation.rw DisplayString .1.3.6.1.4.1.1916.1.1.1.43.1.7 |
extremeDownloadImageMemorycardSpecifies that the image should be obtained from a removable
storage device, which can be a compact flash card or a USB 2.0
storage device.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.43.1.8 |
extremeDownloadImageInstallSpecifies to start the install process after the successful download of
the image.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.43.1.9 |
extremeDownloadSlotNumberSpecifies the slot number currently being used by the active stack
node that is to be rebooted.
Note: This variable is available only on stackable switches in a stack.rw INTEGER .1.3.6.1.4.1.1916.1.1.1.43.1.10 |
extremeDownloadModuleSlotIdSpecifies A or B for an MSM/MM module.
- A specifies the MSM/MM installed in slot A.
- B specifies the MSM/MM installed in slot B.
Note: The modules that can be rebooted are management switch fabric
modules(MSM) and management modules(MM). This object is valid only
on modular switches.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.43.1.11 |
extremeDownloadRowStatusThe existence state of this download image request. This object
follows the row status behavior.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.43.1.12 |
extremeInstallImageTableThis group of objects contain details of the last
or the current install image operation of the switch
modules or nodes. SEQUENCE OF ExtremeInstallImageEntry .1.3.6.1.4.1.1916.1.1.1.44 |
extremeInstallImageEntryThis group of objects contain details of the last
or the current install image operation of one of the switch
modules or nodes. ExtremeInstallImageEntry .1.3.6.1.4.1.1916.1.1.1.44.1 |
extremeInstallImageSlotIdSpecifies the MSM/MM module number of a switch or the slot number currently being
used by the active stack node.ro INTEGER .1.3.6.1.4.1.1916.1.1.1.44.1.1 |
extremeInstallImageStatusSpecifies the status of the current install image operation.ro Enumeration .1.3.6.1.4.1.1916.1.1.1.44.1.2 |
extremeInstallImageFilenameSpecifies the software image file.rw DisplayString .1.3.6.1.4.1.1916.1.1.1.44.1.3 |
extremeInstallImagePartitionSpecifies which partition the image should be saved
to: primary or secondary. Select primary to save the
image to the primary partition and secondary to save
the image to the secondary partition.
Note: Beginning with ExtremeXOS 12.1, an ExtremeXOS core
image must be installed on the alternate (nonactive)
partition. If a user tries to install on an active partition,
the error message [Error: Image can only be installed
to the non-active partition.] is displayed.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.44.1.4 |
extremeInstallImageStartTimeSpecifies the start time of the current install operation.ro DisplayString .1.3.6.1.4.1.1916.1.1.1.44.1.5 |
extremeInstallImageRebootSpecifies to reboot the switch after the image is installed.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.44.1.6 |
extremeInstallImageModuleSlotIdSpecifies A or B for an MSM/MM module.
- A specifies the MSM/MM installed in slot A.
- B specifies the MSM/MM installed in slot B.
Note: The modules that can be rebooted are management switch fabric
modules(MSM) and management modules(MM). This object is valid only
on modular switches.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.44.1.7 |
extremeInstallImageSlotNumberSpecifies the slot number currently being used by the active stack
node that is to be rebooted.
Note: This variable is available only on stackable switches in a stack.rw INTEGER .1.3.6.1.4.1.1916.1.1.1.44.1.8 |
extremeInstallImageRowStatusThe existence state of this install image request. This object
follows the row status behavior.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.1.44.1.9 |
extremeLoadInstallTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.1.45 |
loadInstallControl OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.1.45.1 |
downloadImageTrapEnableThis variable indicates whether the system produces the
downloadImageTrap notification. A no(2) value will prevent
notifications from being generated by this system.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.45.1.1 |
installImageTrapEnableThis variable indicates whether the system produces the
extremeInstallImageTrap notification. A no(2) value will prevent
notifications from being generated by this system.rw Enumeration .1.3.6.1.4.1.1916.1.1.1.45.1.2 |
loadInstallTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.1.45.2 |
downloadImageTrapThis notification indicates the status of the last/current
download operation. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.1.1.45.2.1 |
installImageTrapThis notification indicates the status of the last/current
install operation. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.1.1.45.2.2 |
extremeSaveConfigurationFileNameThis object is set, along the object extremSaveConfiguration
option with value 5.This object indicates the file name to be used
while saving the file. On reading it returns the current selected
config.rw DisplayString .1.3.6.1.4.1.1916.1.1.1.48 |
extremeUseOnRebootFileNameThis object is set, along the object extremeConfigToUseOnReboot
option with value 3.This object indicates the file name to be used
while saving the filerw DisplayString .1.3.6.1.4.1.1916.1.1.1.49 |
extremeChassisGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.2 |
extremeMasterMSMSlotThe extremeSlotNumber of the master MSM module.ro Integer32 .1.3.6.1.4.1.1916.1.1.2.1 |
extremeSlotTableA table containing information about each slot in the
chassis. SEQUENCE OF ExtremeSlotEntry .1.3.6.1.4.1.1916.1.1.2.2 |
extremeSlotEntryA table entry containing information about the module in
each slot of the chassis. ExtremeSlotEntry .1.3.6.1.4.1.1916.1.1.2.2.1 |
extremeSlotNumberA unique integer identifying the particular slot
in the chassis.ro Integer32 .1.3.6.1.4.1.1916.1.1.2.2.1.1 |
extremeSlotNameA name identifying the particular slot in the chassis.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.2.2.1.2 |
extremeSlotModuleConfiguredTypeThe configured module type for the given slot.
At startup, the module-type is none(1). It is
possible to configure the module-type even if there
is no module in the slot. If the current module in the
slot is different than the requested configured module-type,
then the current configuration for the module is erased and
the card will be restarted. The new configured module-type
will be recorded. Since the configured module type is different
than the actual module type, a moduleMismatch trap will be sent,
and the extremeSlotModuleState for that module will show a
mismatch(3). Setting this variable to none(1) will clear the
previously assigned module-type of this slot, and all
configuration information related to the slot will be erased.rw SlotType .1.3.6.1.4.1.1916.1.1.2.2.1.3 |
extremeSlotModuleInsertedTypeThe module type inserted into the slot. It is possible
to have a slot inserted into the slot even though
extremeSlotConfiguredType is none(1).ro SlotType .1.3.6.1.4.1.1916.1.1.2.2.1.4 |
extremeSlotModuleStateThe state of the module inserted in this slot.ro Enumeration .1.3.6.1.4.1.1916.1.1.2.2.1.5 |
extremeSlotModuleSerialNumberThe serial number of the module inserted in this slot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.2.2.1.6 |
extremeChassisPortsPerSlotThe maximum number of ports that can be accomodated
in a single slot. This number would change to accomodate
blades with higher port density than current ones.ro Integer32 .1.3.6.1.4.1.1916.1.1.2.3 |
extremeSystemHealthCheck OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.3 |
extremeHealthCheckErrorTypeThe error reported in the system health check trapro Enumeration .1.3.6.1.4.1.1916.1.1.3.1 |
extremeHealthCheckActionThe action/alarm level configured for health check.ro Enumeration .1.3.6.1.4.1.1916.1.1.3.2 |
extremeHealthCheckMaxRetriesThe maximum number of times a module restart will be attempted if it fails.
If extremeHealthCheckAction is not autorecovery(5), then this value is zero.ro Integer32 .1.3.6.1.4.1.1916.1.1.3.3 |
extremeSystemThresholds OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.4 |
extremeCpuUtilRisingThresholdRising threshold for CPU Aggregation utilization traprwdeprecated INTEGER .1.3.6.1.4.1.1916.1.1.4.1 |
extremeCpuTaskUtilPairTaskName/CPU_% Util pair reported in CPU Utilization traprodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.1.4.2 |
extremeSystemNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.6 |
extremeSystemTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.6.0 |
extremeSystemPowerStatusChange in status of System Power
The trap will not be generated for discovering state. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.1.6.0.1 |
extremeGenericTrapSome event took place in the system NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.1.6.0.2 |
extremePsuPowerStatusTrap to indicate change in status of Power Supply. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.1.6.0.3 |
extremeSystemPowerUsageNotificationWhenever the power usage is increased/decreased by the configured
threshold value then the power usage trap is generated if the trap is enabled.. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.1.6.0.4 |
extremeGenericTrapParams OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.1.7 |
severityThe severity of the message being sent.ro Enumeration .1.3.6.1.4.1.1916.1.1.7.1 |
eventNameThe event name being sent.ro DisplayString .1.3.6.1.4.1.1916.1.1.7.2 |
messageThe message being sentro DisplayString .1.3.6.1.4.1.1916.1.1.7.3 |