EXTREME-WIRELESS-MIB
Extreme Wireless Access Tables
Main OID:
extremeWireless.1.3.6.1.4.1.1916.1.25
825
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
825 total| Object Name |
|---|
extremeWirelessExtreme Wireless Access Tables MODULE-IDENTITY .1.3.6.1.4.1.1916.1.25 |
SNMPv2-SMIExtreme Wireless Access Tables NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.25 |
extremeWirelessPortStatusTableThis table contains one entry per detected AP. SEQUENCE OF ExtremeWirelessPortStatusEntry .1.3.6.1.4.1.1916.1.25.1.1 |
extremeWirelessPortStatusEntry ExtremeWirelessPortStatusEntry .1.3.6.1.4.1.1916.1.25.1.1.1 |
extremeWirelessPortIpAddressThis value is assigned to the port for external
management.rw IpAddress .1.3.6.1.4.1.1916.1.25.1.1.1.1 |
extremeWirelessPortNetmaskThis value is assigned to the AP for external
management.rw IpAddress .1.3.6.1.4.1.1916.1.25.1.1.1.2 |
extremeWirelessPortGatewayThis value is assigned to the AP for external
management.rw IpAddress .1.3.6.1.4.1.1916.1.25.1.1.1.3 |
extremeWirelessPortManagementIPThis value is used by the AP when sending out Management
packets to the external world. This IP is used as src-ip
address in Syslog messages, as NAS-Identifier in Radius requests,
and as Agent-Addr in SNMP trap pdu's.rw IpAddress .1.3.6.1.4.1.1916.1.25.1.1.1.4 |
extremeWirelessPortEnableWirelessTrapsIf set to TRUE the wireless port will send traps for
Authentication and association successful events.
If set to FALSE no traps will be generated.
Note: We always generate the wireless port status
traps.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.5 |
extremeWirelessPortLocationThis describes the physical location of the wireless
port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.6 |
extremeWirelessPortDetectedMaxAgeThis is the number of seconds a station can stay
in the detected station table without authenticating.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.1.1.7 |
extremeWirelessPortMgmtVLANThis value indicates the VLAN tag that should be
applied to all control traffic between the AP and
the platform.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.1.1.8 |
extremeWirelessPortBootromVersionThis is the current version of the bootrom on this AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.9 |
extremeWirelessPortSWVersionThis is the current software version of this AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.10 |
extremeWirelessPortSysDescrThis is the equivalent value of sysDescr from the AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.11 |
extremeWirelessPortManufacturerNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.12 |
extremeWirelessPortProductNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.13 |
extremeWirelessPortSerialNumberThis is the unique serial number for this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.14 |
extremeWirelessPortEdpNeighborIdEDP assigns a unique ID to each neighbor to
disambiguate references. This can be used to index
into the extremeEdpTable.ro ExtremeDeviceId (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.1.1.15 |
extremeWirelessPortClearCountersThis value can be set to true to force the device
to reset it's counters. A read will return false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.16 |
extremeWirelessPortClearLogThis value can be set to true to force the device
to clear its local log store. A read will return
false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.17 |
extremeWirelessPortWatchdogResetThis is to enable/disable watchdog timer reset on timeout.
Default is enable. If it is enabled, system should reset
when the watchdog kicks in. On next bootup, it should
send out an syslog message to syslog server. If it is
disabled, it should record the error and not reset the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.18 |
extremeWirelessPortNumPhysInterfacesEach wireless port has a set of physical interface which are
numbered 1-N. This variable gives the number of
physical interfaces on this AP.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.1.1.19 |
extremeWirelessPortHWVersionThis is the current hardware version of this AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.20 |
extremeWirelessPortMacAddressUnique MAC Address assigned to the ethernet interface on the AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.21 |
extremeWirelessPortRadiusPortIDA string value that should be sent by the AP to the radius
server as the Port-ID radius attribute in authentication requestsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.22 |
extremeWirelessPortBootUpTimeThe sysUpTime of the LAC when the port was booted up.
Should be set only during the AP boot up.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.1.1.23 |
extremeWirelessPortCountryCodeThe country code that the AP is programmed to operate in.rw ExtremeWirelessCountryCode .1.3.6.1.4.1.1916.1.25.1.1.1.24 |
extremeWirelessPortWallclockTimeThe wall clock time as known to the LAC.
Expressed in number of seconds since Jan 1, 1970rw INTEGER .1.3.6.1.4.1.1916.1.25.1.1.1.25 |
extremeWirelessPortPartNumberThis describes the part number of the AP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.26 |
extremeWirelessPortPartRevisionThis describes the revision of the AP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.27 |
extremeWirelessPortUpTimeThe number of seconds the port has been in the online state.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.1.1.28 |
extremeWirelessPortStatusAntennaTypeThis is the type of the Antenna for Detachable product.
For Altitude-2d series, further selection is available
through this variable.rw ExtremeWirelessAntennaType .1.3.6.1.4.1.1916.1.25.1.1.1.29 |
extremeWirelessPortStatusAntennaLocationThis specifies the location the detachable antenna.rw ExtremeWirelessAntennaLocation .1.3.6.1.4.1.1916.1.25.1.1.1.30 |
extremeWirelessPortStatusAntenna2point4GHZGainThis specifies 2.4GHz gain value for detachable antenna in dbirw INTEGER .1.3.6.1.4.1.1916.1.25.1.1.1.31 |
extremeWirelessPortStatusAntenna5GHZGainThis specifies 5GHz gain value for detachable antenna in dbirw INTEGER .1.3.6.1.4.1.1916.1.25.1.1.1.32 |
extremeWirelessPortPrimaryBootloaderVersionThis is the version of the primary bootloader on this AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.33 |
extremeWirelessPortSecondaryBootloaderVersionThis is the version of the Secondary bootloader on this AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.1.1.34 |
extremeWirelessPortCurrentBootloaderInUseThis specifies if the bootloader booted is primary or secondary one.ro Enumeration .1.3.6.1.4.1.1916.1.25.1.1.1.35 |
extremeWirelessPortLogStatusTableThis table contains one entry for each wireless port
which is configured via the configuration table. SEQUENCE OF ExtremeWirelessPortLogStatusEntry .1.3.6.1.4.1.1916.1.25.1.2 |
extremeWirelessPortLogStatusEntry ExtremeWirelessPortLogStatusEntry .1.3.6.1.4.1.1916.1.25.1.2.1 |
extremeWirelessPortLogStatusIndexThere are 9 entries in this table to correspond to
the 8 entries configured in the cfg table plus one
for the LAC. INTEGER .1.3.6.1.4.1.1916.1.25.1.2.1.1 |
extremeWirelessPortLogStatusDestIpThis is the IP address to which syslog messsages
will be sent. A value of 0.0.0.0 indicates that
this entry is disabled. The source IP for every syslog
message comes from the ManagementIP field in
extremeWirelessPortStatusTablerw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.1.2.1.2 |
extremeWirelessPortLogStatusDestIpTypeThe type of address specified in the object
'extremeWirelessPortLogStatusDestIp.
Currently, only 'ipv4' and 'dns' are supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.1.2.1.3 |
extremeWirelessPortLogStatusPortThis is the port to which syslog messages will be
sent.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.2.1.4 |
extremeWirelessPortLogStatusFacilityOptional value for syslog facility local0-7.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.2.1.5 |
extremeWirelessPortLogStatusSeverityThe syslog message severity. All syslog
messages that have a severity >= specified severity,
will be sent to this syslog server.rw Enumeration .1.3.6.1.4.1.1916.1.25.1.2.1.6 |
extremeWirelessPortLogStatusStatusSpecifies whether the log server is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.2.1.7 |
extremeWirelessPortLogTableThis table allows access to the syslog entries on
particular wireless ports. SEQUENCE OF ExtremeWirelessPortLogEntry .1.3.6.1.4.1.1916.1.25.1.3 |
extremeWirelessPortLogEntry ExtremeWirelessPortLogEntry .1.3.6.1.4.1.1916.1.25.1.3.1 |
extremeWirelessPortLogIndexThis is an arbitrary integer which is assinged to
entries in order of their insertion. INTEGER .1.3.6.1.4.1.1916.1.25.1.3.1.1 |
extremeWirelessPortLogMessageThis is the formatted syslog message which was sent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.3.1.2 |
extremeWirelessPhysInterfaceCtlTableThis table provides configuration of per-physical interface
values. SEQUENCE OF ExtremeWirelessPhysInterfaceCtlEntry .1.3.6.1.4.1.1916.1.25.1.4 |
extremeWirelessPhysInterfaceCtlEntryEach entry is indexed by the wirelessInterfaceIndex, and
represents a wireless interface. ExtremeWirelessPhysInterfaceCtlEntry .1.3.6.1.4.1.1916.1.25.1.4.1 |
extremeWirelessPhysInterfaceIndexThis is the ifIndex of an individual physical interface on an AP.
Each radio will have a unique value.ro ExtremeWirelessPhysInterfaceIndex .1.3.6.1.4.1.1916.1.25.1.4.1.1 |
extremeWirelessPhysInterfacePHYChannelThis is the RF channel which will be used by
this transmitter. Range should be established
by configuration of RegDomain and PHYType.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.4.1.2 |
extremeWirelessPhysInterfaceSpeedThis value indicates the current setting for
Tx speed for the interface. Only one of thebits of this bit set can be set.
If all bits are unset (ie a 0 is passed as a value) then
it means that the interface should choose a speed
based on some algorithm.rw Dot11Speed .1.3.6.1.4.1.1916.1.25.1.4.1.3 |
extremeWirelessPhysInterfaceNumVirtInterfacesEach physical interface has a number of virtual interfaces
This specifies the number of virt interfaces.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.4.1.4 |
extremeWirelessPhysInterfaceChannelAutoSelectStatusThis OID reflects the status of the channel auto selection process.ro ExtremeWirelessChannelAutoSelectStatus .1.3.6.1.4.1.1916.1.25.1.4.1.5 |
extremeWirelessPhysInterfaceRadarInterfaceChannelListThis OID reflects the list oc 802.11(a) channels on which
radar interference was detected.ro Dot11AChannel .1.3.6.1.4.1.1916.1.25.1.4.1.6 |
extremeWirelessInterfaceStatusTableThis table provides statistics and information on the
current condition of each wireless interace.
There is one entry per virtual and physical wireless
interface in this table. The values for the physical
interfaces represent the sum of the values for all sub
interfaces. SEQUENCE OF ExtremeWirelessInterfaceStatusEntry .1.3.6.1.4.1.1916.1.25.1.5 |
extremeWirelessInterfaceStatusEntryEach entry in this table is indexed by either a virtual or
a physical ifIndex. ExtremeWirelessInterfaceStatusEntry .1.3.6.1.4.1.1916.1.25.1.5.1 |
extremeWirelessIntfTotalDetectedThis gives the total number of stations which have entered
the detected state on this wireless interface since the last
time the counters were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.1 |
extremeWirelessIntfTotalAuthedThis gives the total number of stations which have entered
the authenticated state on this wireless interface since the
last time the counters were cleared. Note that this is equal
to the number of stations which have entered the forwarding
state. This is not necessaryly equivalent to the number of
stations which have succeeded in MAC-level authentication.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.2 |
extremeWirelessIntfTotalAuthFailedThis gives the total number of stations which have failed
to authenticate on this wireless interface. Note that no
distinction is made between a MAC-layer or higher-layer
authentication failure.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.3 |
extremeWirelessIntfTotalAssocThis gives the total number of stations which have entered
the associated state on this wireless interface since the
last time the counters were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.4 |
extremeWirelessIntfTotalAssocFailedThis gives the total number of stations which have failed
the association on this wireless interface since the
last time the counters were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.5 |
extremeWirelessIntfRateDetectedThis gives the rate of clients being detected on this
interface over a 5 second period using EMWA averaging.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.6 |
extremeWirelessIntfRateAuthedThis gives teh rate of clients being authenticated on this
interface over a 5 second period using EMWA averaging.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.7 |
extremeWirelessIntfRateAuthFailedThis gives the rate of clients failed authentication on this
interface over a 5 second period using EMWA averaging.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.8 |
extremeWirelessIntfRateAssocThis gives the rate of clients being associated on this
interface over a 5 second period using EMWA averaging.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.9 |
extremeWirelessIntfRateAssocFailedThis gives the rate of clients failing association on this
interface over a 5 second period using EMWA averaging.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.10 |
extremeWirelessIntfBlockTimeThis value specifies the number of ticks until traffic will be
allowed back on this interface. A non-zero value indicates that
traffic has been blocked, most likely due to countermeasures.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.11 |
extremeWirelessIntfCurrentDetectedThis gives the current number of stations which are in
the detected state on this wireless interface.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.12 |
extremeWirelessIntfCurrentAuthedThis gives the current number of stations which are in
the authenticated state on this wireless interface.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.13 |
extremeWirelessIntfCurrentAssocThis gives the current number of stations which are in
the associated state on this wireless interface.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.14 |
extremeWirelessIntfCurrentForwardingThis gives the current number of stations which are in
the forwarding state on this wireless interface.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.5.1.15 |
extremeWirelessVirtInterfaceCtlTableThis table provides configuration of per-physical-interface
values. SEQUENCE OF ExtremeWirelessVirtInterfaceCtlEntry .1.3.6.1.4.1.1916.1.25.1.6 |
extremeWirelessVirtInterfaceCtlEntryEach entry is indexed by the wirelessInterfaceIndex, and
represents a virtual wireless interface. ExtremeWirelessVirtInterfaceCtlEntry .1.3.6.1.4.1.1916.1.25.1.6.1 |
extremeWirelessVirtInterfaceIndexThis is the ifIndex of an individual interface on an AP.
Each virtual interface will have a unique value.ro ExtremeWirelessVirtInterfaceIndex .1.3.6.1.4.1.1916.1.25.1.6.1.1 |
extremeWirelessVirtInterfaceMacAddressThe maximum number of clients that can associate with this virtual interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.6.1.2 |
extremeWirelessVirtInterfaceMaxClientsThe maximum number of clients that can associate with this virtual interface.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.6.1.3 |
extremeWirelessVirtInterfaceWirelessBridgingThis specifies whether wireless bridging is enabled on this interface.
If wireless bridging is enabled then traffic originating from a client on this
interface will be bridged to clients on the same VLAN on this or other
virtual interfaces that have wireless bridging enabled. So basically
wireless bridging should be enabled on both the source and the destination
virtual interface for traffic to be bridged.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.6.1.4 |
extremeWirelessVirtInterfaceLastStateChangeThe value of sysUpTime when the virtual interface entered its current statero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.6.1.5 |
extremeWirelessVirtInterfaceStateThis value specifies whether the virtual interface is active or notrw Enumeration .1.3.6.1.4.1.1916.1.25.1.6.1.6 |
extremeWirelessVirtInterfaceIappEnabledIAPP status. A value of TRUE indicates IAPP is enabled on the
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.6.1.7 |
extremeWirelessVirtInterfaceSvpEnabledSVP status. A value of TRUE indicates SVP is enabled on the
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.6.1.8 |
extremeWirelessVirtInterfaceSecurityCtlTableThis table provides configuration of per-interface
values. SEQUENCE OF ExtremeWirelessVirtInterfaceSecurityCtlEntry .1.3.6.1.4.1.1916.1.25.1.7 |
extremeWirelessVirtInterfaceSecurityCtlEntryEach entry is indexed by the wirelessInterfaceIndex, and
represents a wireless interface. ExtremeWirelessVirtInterfaceSecurityCtlEntry .1.3.6.1.4.1.1916.1.25.1.7.1 |
extremeWirelessVirtInterfaceESSNameThe ESS ID of this interface.rw OCTET STRING .1.3.6.1.4.1.1916.1.25.1.7.1.1 |
extremeWirelessVirtInterfaceSSIDInBeaconDoes this interface generate a beacon with the
SSID in it?rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.7.1.2 |
extremeWirelessVirtInterfaceDot11AuthModeSetting this to true indicates whether to use open or shared authenticationrw Dot11AuthMode .1.3.6.1.4.1.1916.1.25.1.7.1.3 |
extremeWirelessVirtInterfaceNetworkAuthModeThis specifies the authentication mode to use on top of dot11 MAC authenticationrw NetworkAuthMode .1.3.6.1.4.1.1916.1.25.1.7.1.4 |
extremeWirelessVirtInterfaceDataVlanThis is the VLAN to use for client data in case of the VLAN is not received as a VSA.
This VLAN is also used for authentication types like PSK, WEP, etcrw INTEGER .1.3.6.1.4.1.1916.1.25.1.7.1.5 |
extremeWirelessVirtInterfaceIgnoreVSAVlanIf this is set then the VLAN returned as a VSA will be ignored and the Data Vlan specified above
will be used insteadrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.7.1.6 |
extremeWirelessVirtInterfaceWEPDefaultKeyThis value indicates the index in dot11WEPDefaultKeyTable that
identifies the key this interface will use to decrypt packets.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.7.1.7 |
extremeWirelessVirtInterfaceEncryptionLengthThis is the length of the encryption key to use in case
of dot1x legacy mode and WEP. If this length is 0 then no WEP encryption.rw Enumeration .1.3.6.1.4.1.1916.1.25.1.7.1.8 |
extremeWirelessVirtInterfaceDot1xCtlTableThere is one entry in this table for each virtual interface
It reflects the dot1x security config SEQUENCE OF ExtremeWirelessVirtInterfaceDot1xCtlEntry .1.3.6.1.4.1.1916.1.25.1.8 |
extremeWirelessVirtInterfaceDot1xCtlEntry ExtremeWirelessVirtInterfaceDot1xCtlEntry .1.3.6.1.4.1.1916.1.25.1.8.1 |
extremeWirelessVirtInterfaceKeyMgmtSuiteThis bitmask configures the authentication suites to be used.rw WPAKeyMgmtSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.8.1.1 |
extremeWirelessVirtInterfaceMcastCipherSuiteThis configures the cipher suite to use for mcast traffic. The cipher suite to use for unicast traffic
is derived from this using the following algorithm:
Mcast cipher = WEP (64/128), Unicast cipher = TKIP
Mcast cipher = TKIP, Unicast cipher = TKIP
Mcast cipher = AES, Unicast cipher = AES.
This therefore determines the max unicast cipher suite the client can use to associate with
this interface.rw WPACipherSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.8.1.2 |
extremeWirelessVirtInterfaceDot1xPSKValueThe Pre-Shared Key (PSK) for when WPA in PSK mode is
the selected authentication suite.rw OCTET STRING .1.3.6.1.4.1.1916.1.25.1.8.1.3 |
extremeWirelessVirtInterfaceDot1xPSKPassPhraseThe PSK, for when WPA in PSK mode is the selected authentication
suite, is configured by extremeWirelessVirtInterfaceKeyMgmtSuite.
An alternative manner of setting the PSK uses the password-to-key
algorithm defined in section XXX. This variable provides a means
to enter a pass phrase. When this object is written, the RSN
entity shall use the password-to-key algorithm specified in
section XXX to derive a pre-shared and populate
extremeWirelessVirtInerfaceDot1xPSKValue with this key.
This object is logically write-only. Reading this variable shall
return unsuccessful status or null or zero.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.8.1.4 |
extremeWirelessVirtInterfaceDot1xReAuthPeriodNumber of seconds a clients authentication will last before
the AP automatically issues a reauthentication request.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.8.1.5 |
extremeWirelessVirtInterfaceGroupUpdateTimeOutThe time in minutes after which the RSN group
update handshake will be retried. The timer shall
start at the moment the group update message is
sent.rw Unsigned32 .1.3.6.1.4.1.1916.1.25.1.8.1.6 |
extremeWirelessVirtInterfacePairwiseUpdateTimeOutThe time in minutes after which the RSN 4-way
handshake will be retried. The timer shall start at
the moment a 4-way message is sent.rw Unsigned32 .1.3.6.1.4.1.1916.1.25.1.8.1.7 |
extremeWirelessVirtInterfaceWEPKeyTableThis table contains per-profile WEP keys.
Reference ieee802dot11.1.2.3. SEQUENCE OF ExtremeWirelessVirtInterfaceWEPKeyEntry .1.3.6.1.4.1.1916.1.25.1.9 |
extremeWirelessVirtInterfaceWEPKeyEntry ExtremeWirelessVirtInterfaceWEPKeyEntry .1.3.6.1.4.1.1916.1.25.1.9.1 |
extremeWirelessVirtInterfaceWEPKeyIndexThere can be upto 4 wep keys for any wireless
interface. Four of the keys are to be used with
WEP Authentication, and the other four with MAC Auth. INTEGER .1.3.6.1.4.1.1916.1.25.1.9.1.1 |
extremeWirelessVirtInterfaceWEPKeyThis is a write-only wep key.rw OCTET STRING .1.3.6.1.4.1.1916.1.25.1.9.1.2 |
extremeWirelessVirtInterfaceWEPKeyStatusSpecifies whether the key is present or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.9.1.3 |
extremeWirelessPhysInterfaceRFCtlTableThis table provides configuration of per-interface
values. SEQUENCE OF ExtremeWirelessPhysInterfaceRFCtlEntry .1.3.6.1.4.1.1916.1.25.1.10 |
extremeWirelessPhysInterfaceRFCtlEntryEach entry is indexed by the wirelessInterfaceIndex, and
represents a wireless interface. ExtremeWirelessPhysInterfaceRFCtlEntry .1.3.6.1.4.1.1916.1.25.1.10.1 |
extremeWirelessPhysInterfaceBeaconPeriodThis is the beacon interval to userw INTEGER .1.3.6.1.4.1.1916.1.25.1.10.1.1 |
extremeWirelessPhysInterfaceTxPowerLevelThis is the % of max power to transmit at.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.10.1.2 |
extremeWirelessPhysInterfaceDTIMPeriodThis is the DTIM period.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.10.1.3 |
extremeWirelessPhysInterfaceFragLengthrw INTEGER .1.3.6.1.4.1.1916.1.25.1.10.1.4 |
extremeWirelessPhysInterfaceLongRetryAttribute indicates the maximum number of transmission
attempts of a frame whose size is > RTS.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.10.1.5 |
extremeWirelessPhysInterfaceShortRetryAttribute indicates the maximum number of transmission
attempts of a frame whose size is <= RTS.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.10.1.6 |
extremeWirelessPhysInterfaceRTSThresholdrw INTEGER .1.3.6.1.4.1.1916.1.25.1.10.1.7 |
extremeWirelessPhysInterfaceSupportedDataRatesRxValueA bitmask of all supported datarates for Rx.ro Dot11Speed .1.3.6.1.4.1.1916.1.25.1.10.1.8 |
extremeWirelessPhysInterfaceSupportedDataRatesTxValueA bitmask of all supported datarates for Tx.ro Dot11Speed .1.3.6.1.4.1.1916.1.25.1.10.1.9 |
extremeWirelessPhysInterfacePHYTypeThis variable selects between 802.11 a/b/g
for this transmitter. It should be used by
ap to range check frequency, etc.rw Dot11Type .1.3.6.1.4.1.1916.1.25.1.10.1.10 |
extremeWirelessPhysInterfacePHYSupportedTypesThis is the 802.11 standard supported by this
interface as a bitmaskro Bits .1.3.6.1.4.1.1916.1.25.1.10.1.11 |
extremeWirelessPhysInterfacePreambleThis changes the 802 preamble expected by the
interface.rw Enumeration .1.3.6.1.4.1.1916.1.25.1.10.1.12 |
extremeWirelessPhysInterfaceAbsTxPowerLevelThis is the absolute value of max power to transmit level in dBm.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.10.1.13 |
extremeWirelessClientTableThis table augments the Dot11AccessPointAddressTableEntry
to add a per-client VLAN entry. SEQUENCE OF ExtremeWirelessClientEntry .1.3.6.1.4.1.1916.1.25.1.11 |
extremeWirelessClientEntryAn entry in the extremeWirelessClientTable. It is possible
for there to be multiple IEEE 802.11 interfaces on one agent,
each with its unique MAC address. The relationship between an
IEEE 802.11 interface and an interface in the context of the
Internet-standard MIB is one-to-one. As such, the value of an
ifIndex object instance can be directly used to identify
corresponding instances of the objects defined herein. by
ifIndex. ExtremeWirelessClientEntry .1.3.6.1.4.1.1916.1.25.1.11.1 |
extremeWirelessClientIDThe Unique MAC Address of the station for which this address
table entry pertains.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.11.1.1 |
extremeWirelessClientStateThis attribute shall indicate the current state of the connection
between a wireless station and the AP. The attribute is
enumerated as follows:
1 - Detected - station has been detected, but not is communicating with AP
2 - Authenticated - station is authenticated but not currently
associated.
3 - Associated - station is authenticated and associated
4 - Data-forwarding - station is on the network
It is assumed that if an station is deauthenticated, or disassociated
then it no longer has an entry the AP's Address Table.ro Enumeration .1.3.6.1.4.1.1916.1.25.1.11.1.2 |
extremeWirelessClientEncryptionThis attribute is contains the encryption mechanism being used
by the station in an AP that allows mixed encryption modes.ro WPACipherSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.11.1.3 |
extremeWirelessClientSignalStrengthThis attribute shall specify the signal strength of the last
frame received from the station in - dBm. e.g. a value of 50
implies -50 dBm.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.11.1.4 |
extremeWirelessClientLinkQualityThis attribute shall contain an indication of the quality
of the signal as measured in the last frame received from the
station. TBD format of this attributero INTEGER .1.3.6.1.4.1.1916.1.25.1.11.1.5 |
extremeWirelessClientVLANThis is the per-client VLAN which was pushed over
by a RADIUS server or other mechanism.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.11.1.6 |
extremeWirelessClientPriorityThis is a per-client 802.1p value which was either
configured by the RADIUS server or statically through
the port configuration table.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.11.1.7 |
extremeWirelessClientAuthTypeThis is an indication of what access method was
used to authenticated the client. The strongest
mechanism used should be listed here, in case more
than one was used. For example, if a combination of
mac-based shared-key and dot1x were used, this value
should indicated dot1x.ro ClientAuthType (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.11.1.8 |
extremeWirelessClientLastStateChangeTimeThis is the sysUpTime of the switch when the clients state changed lastro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.11.1.9 |
extremeWirelessClientTxFramesThis is the number of packets transmitted to the clientro Counter32 .1.3.6.1.4.1.1916.1.25.1.11.1.10 |
extremeWirelessClientRxFramesThis is the number of packets transmitted by the clientro Counter32 .1.3.6.1.4.1.1916.1.25.1.11.1.11 |
extremeWirelessClientTxBytesThis is the number of bytes transmitted to the clientro Counter64 .1.3.6.1.4.1.1916.1.25.1.11.1.12 |
extremeWirelessClientRxBytesThis is the number of bytes transmitted by the clientro Counter64 .1.3.6.1.4.1.1916.1.25.1.11.1.13 |
extremeWirelessClientLastPacketTypeThis the the last packet type seen from the specific clientro Enumeration .1.3.6.1.4.1.1916.1.25.1.11.1.14 |
extremeWirelessClientSSIDThe SSID that this client was usingro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.11.1.15 |
extremeWirelessClientStatusThis variable is used to delete an entry from the table.
The only value this can be set to, is delete (6).
If an entry is deleted, that is already in Associated or
data-forwarding state, then the AP should dis-associate the
particular client by sending a disassociate message.
If an entry is in Authenticated state, and is deleted, then
the AP should 'deAuthenticate' that client.
If an entry is in 'detected' state and is deleted, then the
entry should just be removed from the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.11.1.16 |
extremeWirelessClientIPIP Address of the wireless client.ro IpAddress .1.3.6.1.4.1.1916.1.25.1.11.1.17 |
extremeWirelessClientUsernameUsername (if any) of the wireless client.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.11.1.18 |
extremeWirelessClientDecryptionFailuresThis is the number of failures during decrypting packets from this client.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.11.1.19 |
extremeWirelessClientMICFailuresThis is the number of MIC failures for this client.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.11.1.20 |
extremeAPAuthServerTableThis table is proxied by the wireless APs. It
allows the wireless concentrator to configure the
APs security settings. SEQUENCE OF ExtremeAPAuthServerEntry .1.3.6.1.4.1.1916.1.25.1.12 |
extremeAPAuthServerEntry ExtremeAPAuthServerEntry .1.3.6.1.4.1.1916.1.25.1.12.1 |
extremeAPAuthServerIndexInteger representing either primary (1) or backup
(2) server. INTEGER .1.3.6.1.4.1.1916.1.25.1.12.1.1 |
extremeAPAuthServerAddressTypeThe type of address specified in the object
'extremeAuthServerAddress'.
Currently, only 'ipv4' and 'dns' are supported.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.1.12.1.2 |
extremeAPAuthServerAddressIP address of the radius server. The act of
assigning an IP address enables the client to use
the server. Setting this value to 0.0.0.0 disables
this entry.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.1.12.1.3 |
extremeAPAuthServerPortThe UDP port number of the remote syslog server
to which syslog messages will be sent.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.12.1.4 |
extremeAPAuthServerSecretThis is the shared secret between the Authenticator
and radius server. This is logically write-only.rw OCTET STRING .1.3.6.1.4.1.1916.1.25.1.12.1.5 |
extremeAPAuthServerReTransmitThis is the timeout in seconds after which the
Authenticator will re transmit requests to the
radius server.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.12.1.6 |
extremeAPAuthServerStatusSpecifies whether the DNS entry is in use or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.12.1.7 |
extremeWirelessScanCfgTableThis table contains one entry per wireless interface. It
allows for configuration of active and passive scan
parameters. SEQUENCE OF ExtremeWirelessScanCfgEntry .1.3.6.1.4.1.1916.1.25.1.24 |
extremeWirelessScanCfgEntry ExtremeWirelessScanCfgEntry .1.3.6.1.4.1.1916.1.25.1.24.1 |
extremeWirelessScanEnableBy setting this to true the wireless interface will collect
information from beacons and (possible) probe responses. If
this value is set to false this information will not be
collected.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.24.1.1 |
extremeWirelessScanSendProbeIf this value is set to TRUE the wireless interface will send
probe requests to the broadcast SSID every ProbeInterval. The
results of these probes will be recorded in the scan results
table. If this is false, the AP will only collect information
from beacon frames.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.24.1.2 |
extremeWirelessScanProbeIntervalThis allows for the configuration of the interval over which
probe requests will be sent.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.1916.1.25.1.24.1.3 |
extremeWirelessScanResultTableSizeThis parameter permits the configuration of the result table
size. If there are more entries discovered than there are
room for the new entry will replace the oldest entry in the
table. In this case a new entry trap will be sent with the
OverFlow value set to TRUE.rw Unsigned32 .1.3.6.1.4.1.1916.1.25.1.24.1.4 |
extremeWirelessScanResultTimeoutBy default the scan result table will age out entries which
haven't been updated for some time. When an entry is aged
out of the table a scanResultAgeOut trap is generated.
Setting this value to 0 will disable the aging out of entries.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.1916.1.25.1.24.1.5 |
extremeWirelessScanResetStatsSetting this to TRUE will cause the scan module to reset its
internal statistics, as well as the packet counts for each
entry in the scan results table. It will *not* remove any
entries in the scan table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.24.1.6 |
extremeWirelessScanClearTableSetting this to TRUE will cause the scan module to reset its
internal table. All currently detected stations will be
removed. Scan statistics (i.e. watermark) will not be reset.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.24.1.7 |
extremeWirelessScanSendAPAddedTrapSetting this to TRUE will cause the scan module to send a trap
whenever a new entry is added to the scan results table. If
this value is false the scan module will suppress the trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.24.1.8 |
extremeWirelessScanSendAPRemovedTrapSetting this to TRUE will cause the scan module to send a trap
whenever an entry is removed from the scan results table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.24.1.9 |
extremeWirelessScanSendAPUpdatedTrapSetting this to TRUE will cause the scan module to send a trap
whenever an entry is updated in the scan results table. This
will happen if the list of IEs sent from a particular MAC address
changes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.24.1.10 |
extremeWirelessOffChannelScanCfgTableThis table contains one entry per wireless interface. It
allows for configuration of off-channel scan. To start an
off-channel scan the management station should write values
for channel list, min and max wait. Toggling the start
value at this point will start an off-channel scan, unless
one is already running.
Results of the off-channel scan are reported to the scan
results table together with the results of passive scan. SEQUENCE OF ExtremeWirelessOffChannelScanCfgEntry .1.3.6.1.4.1.1916.1.25.1.25 |
extremeWirelessOffChannelScanCfgEntry ExtremeWirelessOffChannelScanCfgEntry .1.3.6.1.4.1.1916.1.25.1.25.1 |
extremeWirelessOffChannelScanStartSetting this to TRUE will cause the scan module to start an
off-channel scan. The radio will be disabled for the
duration of the scan. The scan module will change to each
of the specified channels in order. It will then conduct
passive (and perhaps active) scans on that channel for the
configured intervals. When the scan is finished the radio
will be re-enabled.
The scan will wait on each channel for at least MinWait
milliseconds even if it sees no traffic on the channel. It
will wait for at most MaxWait msecs even if it sees traffic.
As a result the best case time for the scan is given by:
# Of Channels * extremeWirelessOffChannelScanMinWait
The worst case completion time is given by:
# Of Channels * extremeWirelessOffChannelScanMaxWait
Results of the off-channnel scan a reported to the scan
results table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.25.1.1 |
extremeWirelessOffChannelScanListThis value controls the channels which will be scanned during
the off-channel scan. Two special values should be noted:
all - causes the radio to scan all channels supported by
the configured country code. While on each channel
the radio will send out probe requests if the value
of extremeWirelessScanSendProbeRequest is true.
every - causes the radio to scan all channels, even those
which are restricted by the country code. The
radio will only send probe request on channels that
are legal for that country code.rw Bits .1.3.6.1.4.1.1916.1.25.1.25.1.2 |
extremeWirelessOffChannelScanMinWaitThis value controls the minimum time the off-channel scan
will wait on a particular channel if it doesn't see any
traffic.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.1916.1.25.1.25.1.3 |
extremeWirelessOffChannelScanMaxWaitThis value controls the maximum time the off-channel scan will
wait on a particular channel even if it is receiving beacons
etc.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.1916.1.25.1.25.1.4 |
extremeWirelessOffChannelContinuousSetting this value to true results in the off-channel scan
looping on the configured values until the channel scan is
disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.25.1.5 |
extremeWirelessScanStatusTableThis table contains one entry per wireless interface. It
provides status and statistics information for the scan
feature operating on that wireless interface. SEQUENCE OF ExtremeWirelessScanStatusEntry .1.3.6.1.4.1.1916.1.25.1.26 |
extremeWirelessScanStatusEntry ExtremeWirelessScanStatusEntry .1.3.6.1.4.1.1916.1.25.1.26.1 |
extremeWirelessScanCurrentTableSizeThis indicates the current number of entries in the scan results
table.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.26.1.1 |
extremeWirelessScanTableWatermarkThis indicates the largest size the results table has reached
since the status values have been reset, or the system has
booted.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.26.1.2 |
extremeWirelessScanTotalOverflowsThis gives the total number of entries which have been removed
to make room for a newer entry. This should be equal to the
number of AP added traps the system has generated with the
overflow value set to true.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.26.1.3 |
extremeWirelessScanTotalTimeoutsThis gives the total number of entries which have been removed
because they have become stale. This should be equal to the
number of AP removed traps sent by the system.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.26.1.4 |
extremeWirelessScanOffChannelRunningIf this value is true it indicates that an off-channel scan is
currently running. This implies that the radio is current
disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.26.1.5 |
extremeWirelessScanCurrentChannelIf the value of extremeWirelessScanOffChannelRunning is true
this variable give the value of the current channel the AP is
scanning on. If a scan is not running, the value of this variable
is undefined.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.26.1.6 |
extremeWirelessScanLastElementThis gives the sysUpTime when the last new station was inserted
in the results table.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.26.1.7 |
extremeWirelessScanNumProbesThis gives the number of probe requests sent by this wireless
interface.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.26.1.8 |
extremeWirelessScanResultsTableThis table contains one entry per wireless interface. It
provides status and statistics information for the scan
feature operating on that wireless interface. SEQUENCE OF ExtremeWirelessScanResultsEntry .1.3.6.1.4.1.1916.1.25.1.27 |
extremeWirelessScanResultsEntry ExtremeWirelessScanResultsEntry .1.3.6.1.4.1.1916.1.25.1.27.1 |
extremeWirelessScanResultsStationIdThis is the MAC address of the detected station.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.1 |
extremeWirelessScanResultsFirstSeenThis gives the sysUpTime when this station entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.27.1.2 |
extremeWirelessScanResultsLastChangeThis gives the sysUpTime of the station entry the last time it was
updated (i.e. a beacon etc was received).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.27.1.3 |
extremeWirelessScanResultsPacketTimeThis gives the timestamp field from the last beacon/probe response
received from this station.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.27.1.4 |
extremeWirelessScanResultsPacketRateThis gives the rate at which the last packet was sent by the
station.
TODO: What are the units here on rate?ro INTEGER .1.3.6.1.4.1.1916.1.25.1.27.1.5 |
extremeWirelessScanResultsChannelThis gives the channel the last packet received by this station
was recieved on.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.27.1.6 |
extremeWirelessScanResultsMinRSSThis is the smallest RSS value of any packet recieved from this
station.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.27.1.7 |
extremeWirelessScanResultsMaxRSSThis is the largest RSS value of any packet recieved from this
station.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.27.1.8 |
extremeWirelessScanResultsAvgRSSThis is a running average of RSS values of all the packets
received from this station.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.27.1.9 |
extremeWirelessScanResultsTotalBeaconsThis counter gives the total number of beacons received from this
station.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.27.1.10 |
extremeWirelessScanResultsTotalProbesThis counter gives the total number of probe responses
received from this station.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.27.1.11 |
extremeWirelessScanResultsDiscoveredByThis gives the type of packet which cause this results entry to be
created.ro Enumeration .1.3.6.1.4.1.1916.1.25.1.27.1.12 |
extremeWirelessScanResultsDSSOFDMTODO : What is this?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.13 |
extremeWirelessScanResultsRSNEnabledIndicates if RSN capabilities are enabled on the sending station.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.14 |
extremeWirelessScanResultsGShortSlotTODO : What is this?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.15 |
extremeWirelessScanResultsChannelAgilityTODO : What is this?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.16 |
extremeWirelessScanResultsPBCCTODO : What is this?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.17 |
extremeWirelessScanResultsPreambleTODO : What is this?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.18 |
extremeWirelessScanResultsPrivacyThis is true if MAC-based privacy is invoked on the sending
station.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.19 |
extremeWirelessScanResultsCFPollReqTODO: What is this?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.20 |
extremeWirelessScanResultsCFPollableTODO: What is this?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.21 |
extremeWirelessScanResultsNetworkTypeThis indicates what type of network it is. If this value is IBSS
the last beacon/probe response was sent by a host operating in
ad-hoc mode.ro Enumeration .1.3.6.1.4.1.1916.1.25.1.27.1.22 |
extremeWirelessScanResultsSSIDThis provides the value of the SSID value as is was recieved in
the beacon or probe response. If no SSID was sent in the probe
this value is NULL.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.27.1.23 |
extremeWirelessScanResultsRateSetThis provides the value of the rate set IE as it was received in
the beacon or probe response. If no rate set was recieved then
this value is NULL.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.27.1.24 |
extremeWirelessScanResultsExtRateSetThis provides the value of the extended rate set IE as it was
received in the beacon or probe response. If no rate set was
recieved then this value is NULL.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.27.1.25 |
extremeWirelessScanResultsDSSParameterProvides the value of the DSS parameter IE, which is the channel.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.27.1.26 |
extremeWirelessScanResultsTIMCountTODO: What is this?ro INTEGER .1.3.6.1.4.1.1916.1.25.1.27.1.27 |
extremeWirelessScanResultsTIMPeriodTODO: What is this?ro INTEGER .1.3.6.1.4.1.1916.1.25.1.27.1.28 |
extremeWirelessScanResultsTIMTrafficIndTODO: What is this?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.29 |
extremeWirelessScanResultsCountryCodeValue of country code supplied by the IEro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.27.1.30 |
extremeWirelessScanWPAIEPresentIf this value is true it indicates that WPA information was
gathered from this AP in the last beacon. It implies that
the WPA variables below are valid.
If this value is false it indicates that this AP did not
send a WPA IE in its last beacon, and the values below are
meaningless.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.27.1.31 |
extremeWirelessScanWPAVersionThis value gives the version of WPA supported by this AP.
See IEEE 802.11i Draft 3.0 section 7 for meaning of various
values.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.27.1.32 |
extremeWirelessScanWPAIEMcastCipherThis value gives the single multicast cipher supported by this
AP.ro WPACipherSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.27.1.33 |
extremeWirelessScanWPAUcastCipherCountThis value gives the total number of unicast ciphers supported
by this AP. It corresponds to the number of bits set in the
extremeWirelessScanWPAUcastCipher variable.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.27.1.34 |
extremeWirelessScanWPAUcastCipherThis gives the list of cipher suites which are supported by
this AP.ro WPACipherSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.27.1.35 |
extremeWirelessScanWPAKeyMgmtCountThis gives the number of key-management schemes supported by
this AP. It corresponds to the number of bits set in the
extremeWirelessScanWPAKeyMgmtSuite variable.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.27.1.36 |
extremeWirelessScanWPAKeyMgmtSuiteThis indicates the supported key-management suites supported
by this AP.ro WPAKeyMgmtSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.27.1.37 |
extremeWirelessScanResultsIEBlobAll the IEs received in the last packet encoded as a blob of
Type, Length, Value tuples.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.27.1.38 |
extremeWirelessProbeInfoCfgTableThis table contains one entry per physical and virtual interface.
It controls the collection of client information via PROBE REQ
packets. SEQUENCE OF ExtremeWirelessProbeInfoCfgEntry .1.3.6.1.4.1.1916.1.25.1.28 |
extremeWirelessProbeInfoCfgEntryNote that the ifIndex here can be either a physical or virtual
wireless interface index. ExtremeWirelessProbeInfoCfgEntry .1.3.6.1.4.1.1916.1.25.1.28.1 |
extremeWirelessProbeInfoEnableIf this is set to TRUE then this virtual or physical
interface will register with the MAC layer to receive
notification of PROBE REQ packets. In the case of
a virtual interface this implies the receipt of directed
PROBE REQ packets. If set to FALSE no PROBE REQ packets
will be received, and current entries will eventually
timeout.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.28.1.1 |
extremeWirelessProbeInfoKeepIEsIf this value is set to TRUE then the rate IE which
is carried in the PROBE REQ packet will be recorded.
If FALSE, no rate information will be kept.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.28.1.2 |
extremeWirelessProbeInfoTableSizeThis value sets the maximum size of the probe info
results table, which limits the number of clients this
AP can record PROBE REQ information from.rw Unsigned32 .1.3.6.1.4.1.1916.1.25.1.28.1.3 |
extremeWirelessProbeInfoTimeoutThis is the timeout, in seconds, for an entry in the
probe info table. Once a PROBE REQ has not been heard
from a client in this time period, it's entry is removed.
The value 0 is a sentinel, indicating no timeout.rw Unsigned32 .1.3.6.1.4.1.1916.1.25.1.28.1.4 |
extremeWirelessProbeInfoTableClearSetting this value to TRUE causes all entries in the
probe info table to be removed. Reading this value
has no meaning.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.28.1.5 |
extremeWirelessProbeInfoSourceClearSetting this to the value of some MAC address results in
any matching MAC address in the probe info table being
removed. Reading this value has no meaning.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.28.1.6 |
extremeWirelessProbeInfoTableStatsClearSetting this to TRUE results in all historical statistics
in the probe info table being set to 0. No entries will
be removed. Reading this has no meaning.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.28.1.7 |
extremeWirelessProbeInfoSourceStatsClearSetting this to a MAC address will clear the historical
stats associated with the matching MAC address in the
probe info table. Reading this has no meaning.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.28.1.8 |
extremeWirelessProbeInfoSendAddedTrapSetting this to TRUE will cause the management module to
send a trap whenever a new PROBE REQ source is added to
the probe info table. Setting this to FALSE will
suppress the trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.28.1.9 |
extremeWirelessProbeInfoSendRemovedTrapSetting this to TRUE will cause the management module to
send a trap whenever a PROBE REQ source is removed from
the probe info table. Setting this to false will
suppress the trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.28.1.10 |
extremeWirelessProbeInfoStatusTableThis table contains one entry per physical and virtual interface.
It gives debugging and status information for the operation of the
probe info feature on that interface. SEQUENCE OF ExtremeWirelessProbeInfoStatusEntry .1.3.6.1.4.1.1916.1.25.1.29 |
extremeWirelessProbeInfoStatusEntryNote that the ifIndex here can be either a physical or virtual
wireless interface index. ExtremeWirelessProbeInfoStatusEntry .1.3.6.1.4.1.1916.1.25.1.29.1 |
extremeWirelessProbeInfoStatusCurrentTableSizeThis gives the current number of entries in the probe
info table for this interface.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.29.1.1 |
extremeWirelessProbeInfoStatusWatermarkThis is the maximum size the probe info table has been
since the statistics have been reset.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.29.1.2 |
extremeWirelessProbeInfoStatusTotalOverflowsThis gives the number of times an entry in the probe info
table was overwritten because the table was full.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.29.1.3 |
extremeWirelessProbeInfoStatusTotalTimeoutsThis gives the number of times an entry in the probe info
table was timed out.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.29.1.4 |
extremeWirelessProbeInfoStatusLastElementThis gives the sysUpTime the last time an entry was added
to the probe info table (or modified).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.29.1.5 |
extremeWirelessProbeInfoStatusTotalProbesThis gives the total number of PROBE REQ packets that
this interface has gotten.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.29.1.6 |
extremeWirelessProbeInfoTableThis table contains one entry for each source MAC from which
a PROBE REQ packet has been received. Entries are added when
a packet is recieved from a new source mac. Entries are
removed via management action, or by timeout or overflow. SEQUENCE OF ExtremeWirelessProbeInfoEntry .1.3.6.1.4.1.1916.1.25.1.30 |
extremeWirelessProbeInfoEntryNote that the ifIndex here can be either a physical or virtual
wireless interface index. In addition, this table is indexed
by the MAC address of the PROBE REQ source. ExtremeWirelessProbeInfoEntry .1.3.6.1.4.1.1916.1.25.1.30.1 |
extremeWirelessProbeInfoSourceThis is the MAC address of the source which sent us the
PROBE REQ packets described by this entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.30.1.1 |
extremeWirelessProbeInfoTotalProbesThis gives the total number of PROBE REQ packets we have
received from this source since the last time the stats
were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.30.1.2 |
extremeWirelessProbeInfoTotalProbeRespThis gives the total number of PROBE RESP packets we have
sent to this source. This may not be equal to PROBE REQ
based on rxmit, misses, etc.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.30.1.3 |
extremeWirelessProbeInfoRateIESizeThis gives the size of the rate-ie field in bytes. This
may be 0, at which point there is no rate-ie.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.30.1.4 |
extremeWirelessProbeInfoRateIEThis gives the rate IE as recieved in the last PROBE REQ
packet. It is encoded as a TLV exactly as it was in the
frame. This field may return NULL if storing of rate IE
fields is disabled.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.30.1.5 |
extremeWirelessProbeInfoFirstSeenThis gives the sysUpTime the first time a PROBE REQ was
seen from this source.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.30.1.6 |
extremeWirelessProbeInfoLastChangeThis gives the sysUpTime the last time a PROBE REQ was
seen from this source.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.30.1.7 |
extremeWirelessProbeInfoLastRSSThis gives the RSSI from the last PROBE REQ packet received
from this station.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.30.1.8 |
extremeWirelessProbeInfoLastRateThis gives the rate at which the last packet was received
from this station.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.30.1.9 |
extremeWirelessProbeInfoLastChannelThis gives the channel on which the last PROBE REQ from
this station was heard. PROBE REQs may be heard during
an off-channel scan, at which point this may not be
equal to the current channel.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.30.1.10 |
extremeWirelessClientDiagCfgTableThis table contains one row per wireless interface. Each row
contains configuration values for collection of per-client
diagnostic information. SEQUENCE OF ExtremeWirelessClientDiagCfgEntry .1.3.6.1.4.1.1916.1.25.1.31 |
extremeWirelessClientDiagCfgEntryThere is one entry in this table per virtual interface
(SSID). ExtremeWirelessClientDiagCfgEntry .1.3.6.1.4.1.1916.1.25.1.31.1 |
extremeWirelessClientDiagCfgEnableSetting this to TRUE enables the collection of historical
information on this virtual interface. This implies that
stations which send ASSOC or AUTH packets will have new
entries created in the table for this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.31.1.1 |
extremeWirelessClientDiagCfgClearClientSetting this to the MAC address of a client in the diag
tables will clear the counters for that client. The entry
will not be removed from the table, but all summation
counters will be cleared.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.31.1.2 |
extremeWirelessClientDiagCfgTableSizeThis value will configure the maximum size of the diag table.
The value is specified in number of entries. A value of 0
implies no upper limit.rw Unsigned32 .1.3.6.1.4.1.1916.1.25.1.31.1.3 |
extremeWirelessClientDiagCfgTimeoutThis value will configure the timeout of an entry from the
diagnostics tables. The value is given in seconds. A value
of 0 implies no timeout.rw Unsigned32 .1.3.6.1.4.1.1916.1.25.1.31.1.4 |
extremeWirelessClientDiagStatusTableThis table contains one entry per virtual interface. Values
stored here give current status of the historical client diag
feature. SEQUENCE OF ExtremeWirelessClientDiagStatusEntry .1.3.6.1.4.1.1916.1.25.1.32 |
extremeWirelessClientDiagStatusEntryNote that ifIndex here is virtual ifIndex (SSID). ExtremeWirelessClientDiagStatusEntry .1.3.6.1.4.1.1916.1.25.1.32.1 |
extremeWirelessClientDiagCurrentTableSizeThis is the current size, in entries of the client diag
tables.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.32.1.1 |
extremeWirelessClientDiagTableWatermarkThis is the maximum size the client diag table has been
since the last time the statistics were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.32.1.2 |
extremeWirelessClientDiagTotalOverflowsThis is the total number of times an entry has been
replaced by a newer entry because there was no room
left in the table.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.32.1.3 |
extremeWirelessClientDiagTotalTimeoutsThis is the total number of times an entry has been
aged-out of the table.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.32.1.4 |
extremeWirelessClientDiagLastElementThis is sysUpTime when the last entry was added to
the table.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.32.1.5 |
extremeWirelessClientDiagSupportsSpeedCountersThis value indicates if this AP supports the speed-based
counters from the extremeWirelessClientSpeedCountersTable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.32.1.6 |
extremeWirelessClientDiagSupportsSizeCountersThis value indicates if this AP supports the size-based
counters from the extremeWirelessClientMACSizeCounterTable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.32.1.7 |
extremeWirelessClientDiagSupportsPacketCountersThis value indicates if this AP supports the packet-based
counters from the extremeWirelessClientPacketCountersTable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.32.1.8 |
extremeWirelessClientDiagTableThis table contains information on a per-client basis. Rows are
indexed first by virtual interface, then by client MAC. SEQUENCE OF ExtremeWirelessClientDiagEntry .1.3.6.1.4.1.1916.1.25.1.33 |
extremeWirelessClientDiagEntryNote that ifIndex here is virtual ifIndex (SSID). ExtremeWirelessClientDiagEntry .1.3.6.1.4.1.1916.1.25.1.33.1 |
extremeWirelessClientDiagMacThis is the MAC address of the station this entry
describes.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.33.1.1 |
extremeWirelessClientDiagStateWatermarkThis is the highest state this client has been in.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.33.1.2 |
extremeWirelessClientDiagEntersInDetectedThis is the total number of times the client has entered
the detected state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.3 |
extremeWirelessClientDiagErrorsInDetectedThis is the total number of errors this client has
experienced since the counters were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.4 |
extremeWirelessClientDiagAuthReqInDetectedThis is the total number of AUTH REQ packets received
from this client while it was in the detected state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.5 |
extremeWirelessClientDiagOtherReqInDetectedThis is the total number of REQ packets received from
this client while it was in detected state that were
not AUTH REQ packets.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.6 |
extremeWirelessClientDiagMgmtActionInDetectedThis is the total number of times management initiated
action (i.e. force-disassociate) was received for this
client in the detected state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.7 |
extremeWirelessClientDiagTimeOutInDetectedThis is the total number of timeouts which happened to
this client in the detected state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.8 |
extremeWirelessClientDiagEntersInAuthThis is the total number of times the client has entered
the AUTHED state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.9 |
extremeWirelessClientDiagErrorsInAuthThis is the total number of times the client has had
errors in the AUTHED state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.10 |
extremeWirelessClientDiagAssocReqInAuthThis is the total number of ASSOC REQ or REASSOC REQ
packets received from this client while in the AUTHED
state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.11 |
extremeWirelessClientDiagOtherReqInAuthThis is the total number of non-ASSOC/REASSOC packets
received from this client while in the AUTHED state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.12 |
extremeWirelessClientDiagMgmtActionInAuthThis is the total number of management initiated action
which this client experienced while in the AUTHED state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.13 |
extremeWirelessClientDiagTimeOutInAuthThis is the total number of times this client timed out
while in the authed state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.14 |
extremeWirelessClientDiagEntersInAssocThis is the total number of times this client has entered
the associated state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.15 |
extremeWirelessClientDiagErrorsInAssocThis is the total number of errors this client has had
in the associated state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.16 |
extremeWirelessClientDiagMgmtActionInAssocThis is the total number of management actions which have
happened to this client in the associated state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.17 |
extremeWirelessClientDiagTimeOutInAssocThis is the total number of times this station has been
timed-out in the associated state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.18 |
extremeWirelessClientDiagEntersInForwardThis is the total number of times this client has entered
the forwarding state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.19 |
extremeWirelessClientDiagMgmtActionInForwardThis is the total number of times this client has
experience a management action while in forwarding.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.20 |
extremeWirelessClientDiagTimeOutInForwardThis is the total number of timeouts this client has
experienced while in forwarding.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.21 |
extremeWirelessClientDiagTotal802AuthsThis is the total number of times this client has tried
to authenticate using 802.1x.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.22 |
extremeWirelessClientDiagTotalNetLoginAuthsThis is the total number of times this client has tried
to authenticate using NetLogin.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.33.1.23 |
extremeWirelessClientAssocInfoTableThis table contains one row per client on a wireless interface.
It gives information about the association history and parameters
of that client. SEQUENCE OF ExtremeWirelessClientAssocInfoEntry .1.3.6.1.4.1.1916.1.25.1.34 |
extremeWirelessClientAssocInfoEntryNote that ifIndex here is virtual ifIndex (SSID). ExtremeWirelessClientAssocInfoEntry .1.3.6.1.4.1.1916.1.25.1.34.1 |
extremeWirelessClientAssocInfoAssociatedThis gives the current MAC-layer association status of
this client.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.34.1.1 |
extremeWirelessClientAssocInfoTotalAssocReqThis gives the total number of ASSOC REQ pdus recieved
from this client since the last time the counters were
cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.2 |
extremeWirelessClientAssocInfoTotalReAssocReqThis gives the total number of REASSOC REQ PDUs received
from this client since the last time the counters were
cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.3 |
extremeWirelessClientAssocInfoTotalAssocRespThis gives the total number of ASSOC RESP pdus sent to
this client since the last time the counters were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.4 |
extremeWirelessClientAssocInfoTotalAssocOKThis gives the total number of ASSOC RESP PDUs which
carried a status = ok response.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.5 |
extremeWirelessClientAssocInfoTotalAssocFailThis gives the total number of ASSOC RESP PDUs which
carried a status = failed response.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.6 |
extremeWirelessClientAssocInfoTotalDisassocReqThis gives the total number of ASSOC RESP PDUs which
carried a status = failed response.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.7 |
extremeWirelessClientAssocInfoTotalDisassocRespThis gives the total number of ASSOC RESP PDUs which
carried a status = failed response.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.8 |
extremeWirelessClientAssocInfoRateIEThis is the value of the rate IE carried in the last
ASSOC REQ packet if this wireless interface is configured
to keep IEs. If it's not, this will be NULL. The IE
is encoded as a series of bytes exactly as the value
portion of the IE in the PDU.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.34.1.9 |
extremeWirelessClientAssocInfoLastAssocThis is sysUpTime when the last ASSOC REQ was received
from this client.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.34.1.10 |
extremeWirelessClientAssocInfoLastErrorThis is sysUpTime when the last ASSOC RESP was sent to
this client with a failure status.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.34.1.11 |
extremeWirelessClientAssocInfoLastErrorTypeThis is an enumerated type which indicates which was the
last error this client experienced during association.ro Enumeration .1.3.6.1.4.1.1916.1.25.1.34.1.12 |
extremeWirelessClientAssocInfoErrorRateMismatchThis is the total number of failed associations due to
a mismatch of the rate IEs.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.13 |
extremeWirelessClientAssocInfoErrorBadStateThis is the total number of failed associations due to
the client being in the wrong state.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.14 |
extremeWirelessClientAssocInfoErrorBadCapabilityThis is the total number of failed associations due to
the client having a capability mismatch with the AP.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.15 |
extremeWirelessClientAssocInfoErrorCounterMeasureThis is the total number of failed associations due to
the client being subject to a counter measure.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.16 |
extremeWirelessClientAssocInfoErrorMcastCipherThis is the total number of failed associations due to
the client not supporting the current multicast cipher.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.17 |
extremeWirelessClientAssocInfoErrorMaxAssocThis is the total number of failed associations due to
the AP having too many associations already.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.18 |
extremeWirelessClientAssocInfoErrorRSNRequiredThis is the total number of failed associations due to
the client not supplying the (required) RSN IE.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.19 |
extremeWirelessClientAssocInfoErrorRSNMismatchThis is the total number of failed associations due to
the client's RSN IE not matching supported features on
the AP.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.20 |
extremeWirelessClientAssocInfoErrorOtherThis is the total number of failed associations due to
the client's RSN IE not matching supported features on
the AP.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.21 |
extremeWirelessClientAssocInfoWPAIEPresentIf this value is true it indicates that WPA information was
gathered from this station in the last association request.
If true, it implies the values of the WPA variables below
are valid. If false, it indicates that this station did not
send a WPA IE in its last association.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.34.1.22 |
extremeWirelessClientAssocInfoWPAVersionThis value gives the version of WPA supported by this station.
See IEEE 802.11i Draft 3.0 section 7 for meaning of various
values.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.23 |
extremeWirelessClientAssocInfoWPAIEMcastCipherThis value gives the single multicast cipher supported by this
client.ro WPACipherSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.34.1.24 |
extremeWirelessClientAssocInfoWPAUcastCipherCountThis gives the number of set bits in the ucast cipher
variable below. In this case this number should always
be 1.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.25 |
extremeWirelessClientAssocInfoWPAUcastCipherThis gives the cipher suites which was requested by
this client during its last assoc req.ro WPACipherSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.34.1.26 |
extremeWirelessClientAssocInfoWPAKeyMgmtCountThis value gives the number of key management suites
requested by this client in the last assoc. req message.
It indicates the number of set bits in the mgmt suite
variable below.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.34.1.27 |
extremeWirelessClientAssocInfoWPAKeyMgmtSuiteGives the key management suite requested by this client
during its last association request.ro WPAKeyMgmtSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.1.34.1.28 |
extremeWirelessClientAssocIEBlobThis is the IE list sent in the association frame encoded as
a series of TLVs.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.34.1.29 |
extremeWirelessClientAuthInfoTableThis table contains one row per client on a wireless interface.
It gives information about the authentication history and params
of that client. SEQUENCE OF ExtremeWirelessClientAuthInfoEntry .1.3.6.1.4.1.1916.1.25.1.35 |
extremeWirelessClientAuthInfoEntryNote that ifIndex here is virtual ifIndex (SSID). ExtremeWirelessClientAuthInfoEntry .1.3.6.1.4.1.1916.1.25.1.35.1 |
extremeWirelessClientAuthInfoCurrentAuthThis gives the current MAC-layer authentication status of the
client.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.35.1.1 |
extremeWirelessClientAuthInfoTotalAuthsThis is the total number of AUTH REQ packets received from
this client since the last time the counters were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.2 |
extremeWirelessClientAuthInfoTotalAuthRespThis is the total number of AUTH RESP packets sent to
this client since the last time the counters were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.3 |
extremeWirelessClientAuthInfoTotalAuthsOKThis is the total number of AUTH RESP packets sent to
this client which carried a STATUS = OK message.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.4 |
extremeWirelessClientAuthInfoTotalAuthsFailedThis is the total number of AUTH RESP packets sent to
this client which carried a STATUS = Failed message.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.5 |
extremeWirelessClientAuthInfoTotalDeauthReqThis is the total number of DEAUTH REQ packets sent from
this client.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.6 |
extremeWirelessClientAuthInfoTotalDeauthRespThis is the total number of DEAUTH RESP packets sent to
this client.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.7 |
extremeWirelessClientAuthInfoTotalOpenThis is the total number of AUTH REQ packets which
requested open authentication from the AP.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.8 |
extremeWirelessClientAuthInfoTotalSharedThis is the total number of AUTH REQ packets which
requested shared authentication from the AP.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.9 |
extremeWirelessClientAuthInfoLastAuthThis is the sysUpTime the last time this client sent
a request for authentication.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.35.1.10 |
extremeWirelessClientAuthInfoLastAuthTypeThis is the last type of authentication requested by
this client.ro Enumeration .1.3.6.1.4.1.1916.1.25.1.35.1.11 |
extremeWirelessClientAuthInfoLastErrorThis is the sysUpTime of the last authentication failure
for this client.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.1.35.1.12 |
extremeWirelessClientAuthInfoLastErrorTypeThis is the OID of the last error counter that was
incremented for this client.ro Enumeration .1.3.6.1.4.1.1916.1.25.1.35.1.13 |
extremeWirelessClientAuthInfoErrorResourceFailureThis is the total number of authentication failures
which have resulted from resource failures.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.14 |
extremeWirelessClientAuthInfoErrorSequenceNumThis is the total number of authentication failures
which have resulted from bad packet sequence numbers.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.15 |
extremeWirelessClientAuthInfoErrorChallengeTextThis is the total number of authentication failures
which have resutled from challenge text mismatch.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.16 |
extremeWirelessClientAuthInfoErrorTypeMismatchThis is the total number of authentication failures
which have resutled from the requested authentication
type (i.e. open/shared) not matching what this virutal
interface is configured for.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.17 |
extremeWirelessClientAuthInfoErrorKeyIndexThis is the total number of authentication failures
which have resulted from key index mismatches.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.18 |
extremeWirelessClientAuthInfoErrorOtherThis is the total number of authentication failures
which have resulted from unspecified errors.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.35.1.19 |
extremeWirelessClientMACInfoTableThis table contains one entry per source MAC which has tried to
authenticate with this virtual interface (SSID). Entries
are created when AUTH or REATH REQ packets are received from
new clients. Entries can be aged out, removed by management
action, or overwritten by an overflow. SEQUENCE OF ExtremeWirelessClientMACInfoEntry .1.3.6.1.4.1.1916.1.25.1.36 |
extremeWirelessClientMACInfoEntry ExtremeWirelessClientMACInfoEntry .1.3.6.1.4.1.1916.1.25.1.36.1 |
extremeWirelessClientMACInfoMinRSSThis gives the minimum RSS indication of any packet we have
seen from this client. A value of 0 indicates that RSSI has
been unavailable.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.36.1.1 |
extremeWirelessClientMACInfoMaxRSSThis gives the maximum RSS indication of any packet we have
seen from this client. A value of 0 indicates that RSSI has
been unavailable.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.36.1.2 |
extremeWirelessClientMACInfoAvgRSSThis gives the average RSS indication of any packet we have
seen from this client. A value of 0 indicates that RSSI has
been unavailable.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.36.1.3 |
extremeWirelessClientMACInfoTotalProbeReqThis gives the total number of PROBE REQ packets recieved from
this client since the counters have been cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.36.1.4 |
extremeWirelessClientMACInfoTotalAuthReqThis gives the total number of AUTH REQ packets recieved from
this client since the counters have been cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.36.1.5 |
extremeWirelessClientMACInfoTotalAssocReqThis gives the total number of ASSOC REQ packets recieved from
this client since the counters have been cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.36.1.6 |
extremeWirelessClientMACInfoTotalReAssocReqThis gives the total number of REASSOC REQ packets recieved from
this client since the counters have been cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.36.1.7 |
extremeWirelessClientMACInfoTotalDeAssocReqThis gives the total number of DEASSOC REQ packets recieved from
this client since the counters have been cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.36.1.8 |
extremeWirelessClientMACInfoTotalDeAuthReqThis gives the total number of DEAUTH REQ packets recieved from
this client since the counters have been cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.36.1.9 |
extremeWirelessClientMACInfoTotalPsPollThis gives the total number of PS POLL packets recieved from
this client since the counters have been cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.36.1.10 |
extremeWirelessClientMACInfoTotalDataThis gives the total number of data frames received from this
client since the counters have been cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.36.1.11 |
extremeWirelessClientMACInfoNavValueTODO: Is this an average, total, what?ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.36.1.12 |
extremeWirelessClientSizeCounterTableThere is one entry in this table for each client which has
tried to authenticate with this virtual interface. A new
entry is created when an AUTH or REATH REQ packet is received
from a new station. Entries are removed by management action,
timeout or overwritten due to overflow.
Entries in this table are also indexed by virtual interface.
A client which has tried to authenticate to multiple virtual
interfaces may have more than one entry in this table. SEQUENCE OF ExtremeWirelessClientSizeCounterEntry .1.3.6.1.4.1.1916.1.25.1.37 |
extremeWirelessClientSizeCounterEntry ExtremeWirelessClientSizeCounterEntry .1.3.6.1.4.1.1916.1.25.1.37.1 |
extremeWirelessClientFrameSizeReXmit64This gives the number of frags retransmitted to this
client which were less than or equal to 64 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.1 |
extremeWirelessClientFrameSizeReXmit128This gives the number of frags retransmitted to this
client which were between 64 and 128 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.2 |
extremeWirelessClientFrameSizeReXmit256This gives the number of frags retransmitted to this
client which were between 128 and 256 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.3 |
extremeWirelessClientFrameSizeReXmit512This gives the number of frags retransmitted to this
client which were between 256 and 512 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.4 |
extremeWirelessClientFrameSizeReXmit1024This gives the number of frags retransmitted to this
client which were between 512 and 1024 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.5 |
extremeWirelessClientFrameSizeReXmit2048This gives the number of frags retransmitted to this
client which were between 1024 and 2048 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.6 |
extremeWirelessClientFrameSizeTX64This gives the number of frags transmitted to this
client which were less than or equal to 64 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.7 |
extremeWirelessClientFrameSizeTX128This gives the number of frags transmitted to this
client which were between 64 and 128 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.8 |
extremeWirelessClientFrameSizeTX256This gives the number of frags transmitted to this
client which were between 128 and 256 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.9 |
extremeWirelessClientFrameSizeTX512This gives the number of frags transmitted to this
client which were between 256 and 512 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.10 |
extremeWirelessClientFrameSizeTX1024This gives the number of frags transmitted to this
client which were between 512 and 1024 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.11 |
extremeWirelessClientFrameSizeTX2048This gives the number of frags transmitted to this
client which were between 1024 and 2048 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.12 |
extremeWirelessClientFrameSizeRX64This gives the number of frags received from this
client which were less than or equal to 64 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.13 |
extremeWirelessClientFrameSizeRX128This gives the number of frags received from this
client which were between 64 and 128 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.14 |
extremeWirelessClientFrameSizeRX256This gives the number of frags received from this
client which were between 128 and 256 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.15 |
extremeWirelessClientFrameSizeRX512This gives the number of frags received from this
client which were between 256 and 512 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.16 |
extremeWirelessClientFrameSizeRX1024This gives the number of frags received from this
client which were between 512 and 1024 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.17 |
extremeWirelessClientFrameSizeRX2048This gives the number of frags received from this
client which were between 1024 and 2048 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.18 |
extremeWirelessClientFrameSizeErrorTX64This gives the number of frags which failed to be sent from
this client with a length between 0 and 64 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.19 |
extremeWirelessClientFrameSizeErrorTX128This gives the number of frags which failed to be sent from
this client with a length between 65 and 128 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.20 |
extremeWirelessClientFrameSizeErrorTX256This gives the number of frags which failed to be sent from
this client with a length between 129 and 256 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.21 |
extremeWirelessClientFrameSizeErrorTX512This gives the number of frags which failed to be sent from
this client with a length between 257 and 512 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.22 |
extremeWirelessClientFrameSizeErrorTX1024This gives the number of frags which failed to be sent from
this client with a length between 513 and 1024 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.23 |
extremeWirelessClientFrameSizeErrorTX2048This gives the number of frags which failed to be sent from
this client with a length between 1025 and 2048 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.24 |
extremeWirelessClientFrameSizeErrorRX64This gives the number of frags which were received with
an FCS or other error and a length between 0 and 64 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.25 |
extremeWirelessClientFrameSizeErrorRX128This gives the number of frags which were received with
an FCS or other error and a length between 65 and 128 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.26 |
extremeWirelessClientFrameSizeErrorRX256This gives the number of frags which were received with
an FCS or other error and a length between 129 and 256 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.27 |
extremeWirelessClientFrameSizeErrorRX512This gives the number of frags which were received with
an FCS or other error and a length between 257 and 512 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.28 |
extremeWirelessClientFrameSizeErrorRX1024This gives the number of frags which were received with
an FCS or other error and a length between 513 and 1024 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.29 |
extremeWirelessClientFrameSizeErrorRX2048This gives the number of frags which were received with
an FCS or other error and a length between 1025 and 2048 bytes.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.30 |
extremeWirelessClientPacketSizeTX64This gives the number of packets transmitted to this
client which were less than or equal to 64 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.31 |
extremeWirelessClientPacketSizeTX128This gives the number of packets transmitted to this
client which were between 64 and 128 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.32 |
extremeWirelessClientPacketSizeTX256This gives the number of packets transmitted to this
client which were between 128 and 256 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.33 |
extremeWirelessClientPacketSizeTX512This gives the number of packets transmitted to this
client which were between 256 and 512 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.34 |
extremeWirelessClientPacketSizeTX1024This gives the number of packets transmitted to this
client which were between 512 and 1024 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.35 |
extremeWirelessClientPacketSizeTX2048This gives the number of packets transmitted to this
client which were between 1024 and 2048 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.36 |
extremeWirelessClientPacketSizeRX64This gives the number of packets received from this
client which were less than or equal to 64 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.37 |
extremeWirelessClientPacketSizeRX128This gives the number of packets received from this
client which were between 64 and 128 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.38 |
extremeWirelessClientPacketSizeRX256This gives the number of packets received from this
client which were between 128 and 256 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.39 |
extremeWirelessClientPacketSizeRX512This gives the number of packets received from this
client which were between 256 and 512 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.40 |
extremeWirelessClientPacketSizeRX1024This gives the number of packets received from this
client which were between 512 and 1024 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.41 |
extremeWirelessClientPacketSizeRX2048This gives the number of packets received from this
client which were between 1024 and 2048 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.37.1.42 |
extremeWirelessClientSpeedCounterTableThis table is indexed by wireless interface index. These
are the virtual interfaces corresponding to the SSID. Support
for this table is optional, indicated by the value of the variable
extremeWirelessClientDiagSupportsSpeedCounters in the status table. SEQUENCE OF ExtremeWirelessClientSpeedCounterEntry .1.3.6.1.4.1.1916.1.25.1.38 |
extremeWirelessClientSpeedCounterEntryThe ifIndex here is the wireless interface (SSID). It is expected
that an entry will be created in this table only after a client
sends a AUTH or REATH packet to the SSID. ExtremeWirelessClientSpeedCounterEntry .1.3.6.1.4.1.1916.1.25.1.38.1 |
extremeWirelessClientSpeedReXmit1This gives the number of frags which were retransmitted to
the given client at 1 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.1 |
extremeWirelessClientSpeedReXmit2This gives the number of frags which were retransmitted to
the given client at 2 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.2 |
extremeWirelessClientSpeedReXmit5p5This gives the number of frags which were retransmitted to
the given client at 5 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.3 |
extremeWirelessClientSpeedReXmit6This gives the number of frags which were retransmitted to
the given client at 6 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.4 |
extremeWirelessClientSpeedReXmit9This gives the number of frags which were retransmitted to
the given client at 9 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.5 |
extremeWirelessClientSpeedReXmit12This gives the number of frags which were retransmitted to
the given client at 12 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.6 |
extremeWirelessClientSpeedReXmit18This gives the number of frags which were retransmitted to
the given client at 18 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.7 |
extremeWirelessClientSpeedReXmit24This gives the number of frags which were retransmitted to
the given client at 24 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.8 |
extremeWirelessClientSpeedReXmit36This gives the number of frags which were retransmitted to
the given client at 36 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.9 |
extremeWirelessClientSpeedReXmit48This gives the number of frags which were retransmitted to
the given client at 48 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.10 |
extremeWirelessClientSpeedReXmit54This gives the number of frags which were retransmitted to
the given client at 54 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.11 |
extremeWirelessClientSpeedTX1This gives the number of frags which were transmitted to
the given client at 1 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.12 |
extremeWirelessClientSpeedTX2This gives the number of frags which were transmitted to
the given client at 2 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.13 |
extremeWirelessClientSpeedTX5p5This gives the number of frags which were transmitted to
the given client at 5 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.14 |
extremeWirelessClientSpeedTX6This gives the number of frags which were transmitted to
the given client at 6 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.15 |
extremeWirelessClientSpeedTX9This gives the number of frags which were transmitted to
the given client at 9 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.16 |
extremeWirelessClientSpeedTX12This gives the number of frags which were transmitted to
the given client at 12 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.17 |
extremeWirelessClientSpeedTX18This gives the number of frags which were transmitted to
the given client at 18 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.18 |
extremeWirelessClientSpeedTX24This gives the number of frags which were transmitted to
the given client at 24 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.19 |
extremeWirelessClientSpeedTX36This gives the number of frags which were transmitted to
the given client at 36 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.20 |
extremeWirelessClientSpeedTX48This gives the number of frags which were transmitted to
the given client at 48 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.21 |
extremeWirelessClientSpeedTX54This gives the number of frags which were transmitted to
the given client at 54 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.22 |
extremeWirelessClientSpeedRX1This gives the number of frags which were received from
the given client at 1 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.23 |
extremeWirelessClientSpeedRX2This gives the number of frags which were received from
the given client at 2 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.24 |
extremeWirelessClientSpeedRX5p5This gives the number of frags which were received from
the given client at 5 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.25 |
extremeWirelessClientSpeedRX6This gives the number of frags which were received from
the given client at 6 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.26 |
extremeWirelessClientSpeedRX9This gives the number of frags which were received from
the given client at 9 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.27 |
extremeWirelessClientSpeedRX12This gives the number of frags which were received from
the given client at 12 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.28 |
extremeWirelessClientSpeedRX18This gives the number of frags which were received from
the given client at 18 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.29 |
extremeWirelessClientSpeedRX24This gives the number of frags which were received from
the given client at 24 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.30 |
extremeWirelessClientSpeedRX36This gives the number of frags which were received from
the given client at 36 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.31 |
extremeWirelessClientSpeedRX48This gives the number of frags which were received from
the given client at 48 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.32 |
extremeWirelessClientSpeedRX54This gives the number of frags which were received from
the given client at 54 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.38.1.33 |
extremeWirelessIntfFrameSizeTableThere is one entry in this table for each virtual and
physical interface. Values for physical interfaces are
summations of the values for the constituent virtual
interfaces. SEQUENCE OF ExtremeWirelessIntfFrameSizeEntry .1.3.6.1.4.1.1916.1.25.1.39 |
extremeWirelessIntfFrameSizeEntry ExtremeWirelessIntfFrameSizeEntry .1.3.6.1.4.1.1916.1.25.1.39.1 |
extremeWirelessIntfFrameSizeMgmtTX64This gives the number of management-type frames transmitted
on this interface which were less than or equal to 64 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.1 |
extremeWirelessIntfFrameSizeMgmtTX128This gives the number of management-type frames transmitted
on this interface which were between 65 and 128 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.2 |
extremeWirelessIntfFrameSizeMgmtTX256This gives the number of management-type frames transmitted
on this interface which were between 129 and 256 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.3 |
extremeWirelessIntfFrameSizeMgmtTX512This gives the number of management-type frames transmitted
on this interface which were between 257 and 512 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.4 |
extremeWirelessIntfFrameSizeMgmtTX1024This gives the number of management-type frames transmitted
on this interface which were between 513 and 1024 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.5 |
extremeWirelessIntfFrameSizeMgmtTX2048This gives the number of management-type frames transmitted
on this interface which were between 1025 and 2048 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.6 |
extremeWirelessIntfFrameSizeMgmtRX64This gives the number of management-type frames received
on this interface which were less than or equal to 64 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.7 |
extremeWirelessIntfFrameSizeMgmtRX128This gives the number of management-type frames received
on this interface which were between 65 and 128 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.8 |
extremeWirelessIntfFrameSizeMgmtRX256This gives the number of management-type frames received
on this interface which were between 129 and 256 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.9 |
extremeWirelessIntfFrameSizeMgmtRX512This gives the number of management-type frames received
on this interface which were between 257 and 512 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.10 |
extremeWirelessIntfFrameSizeMgmtRX1024This gives the number of management-type frames received
on this interface which were between 513 and 1024 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.11 |
extremeWirelessIntfFrameSizeMgmtRX2048This gives the number of management-type frames received
on this interface which were between 1025 and 2048 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.12 |
extremeWirelessIntfFrameSizeCtlTX64This gives the number of control-type frames transmitted
on this interface which were less than or equal to 64 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.13 |
extremeWirelessIntfFrameSizeCtlTX128This gives the number of control-type frames transmitted
on this interface which were between 65 and 128 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.14 |
extremeWirelessIntfFrameSizeCtlTX256This gives the number of control-type frames transmitted
on this interface which were between 129 and 256 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.15 |
extremeWirelessIntfFrameSizeCtlTX512This gives the number of control-type frames transmitted
on this interface which were between 257 and 512 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.16 |
extremeWirelessIntfFrameSizeCtlTX1024This gives the number of control-type frames transmitted
on this interface which were between 513 and 1024 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.17 |
extremeWirelessIntfFrameSizeCtlTX2048This gives the number of control-type frames transmitted
on this interface which were between 1025 and 2048 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.18 |
extremeWirelessIntfFrameSizeCtlRX64This gives the number of control-type frames received
on this interface which were less than or equal to 64 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.19 |
extremeWirelessIntfFrameSizeCtlRX128This gives the number of control-type frames received
on this interface which were between 65 and 128 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.20 |
extremeWirelessIntfFrameSizeCtlRX256This gives the number of control-type frames received
on this interface which were between 129 and 256 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.21 |
extremeWirelessIntfFrameSizeCtlRX512This gives the number of control-type frames received
on this interface which were between 257 and 512 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.22 |
extremeWirelessIntfFrameSizeCtlRX1024This gives the number of control-type frames received
on this interface which were between 513 and 1024 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.23 |
extremeWirelessIntfFrameSizeCtlRX2048This gives the number of control-type frames received
on this interface which were between 1025 and 2048 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.24 |
extremeWirelessIntfFrameSizeDataTX64This gives the number of data-type frames transmitted
on this interface which were less than or equal to 64 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.25 |
extremeWirelessIntfFrameSizeDataTX128This gives the number of data-type frames transmitted
on this interface which were between 65 and 128 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.26 |
extremeWirelessIntfFrameSizeDataTX256This gives the number of data-type frames transmitted
on this interface which were between 129 and 256 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.27 |
extremeWirelessIntfFrameSizeDataTX512This gives the number of data-type frames transmitted
on this interface which were between 257 and 512 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.28 |
extremeWirelessIntfFrameSizeDataTX1024This gives the number of data-type frames transmitted
on this interface which were between 513 and 1024 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.29 |
extremeWirelessIntfFrameSizeDataTX2048This gives the number of data-type frames transmitted
on this interface which were between 1025 and 2048 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.30 |
extremeWirelessIntfFrameSizeDataRX64This gives the number of data-type frames received
on this interface which were less than or equal to 64 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.31 |
extremeWirelessIntfFrameSizeDataRX128This gives the number of data-type frames received
on this interface which were between 65 and 128 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.32 |
extremeWirelessIntfFrameSizeDataRX256This gives the number of data-type frames received
on this interface which were between 129 and 256 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.33 |
extremeWirelessIntfFrameSizeDataRX512This gives the number of data-type frames received
on this interface which were between 257 and 512 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.34 |
extremeWirelessIntfFrameSizeDataRX1024This gives the number of data-type frames received
on this interface which were between 513 and 1024 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.35 |
extremeWirelessIntfFrameSizeDataRX2048This gives the number of data-type frames received
on this interface which were between 1025 and 2048 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.39.1.36 |
extremeWirelessIntfFrameSizeErrorTableThere is one entry in this table for each virtual and
physical interface. Values for physical interfaces are
summations of the values for the constituent virtual
interfaces. SEQUENCE OF ExtremeWirelessIntfFrameSizeErrorEntry .1.3.6.1.4.1.1916.1.25.1.40 |
extremeWirelessIntfFrameSizeErrorEntry ExtremeWirelessIntfFrameSizeErrorEntry .1.3.6.1.4.1.1916.1.25.1.40.1 |
extremeWirelessIntfFrameSizeReXmit64This gives the number of frames retransmitted on this
interface which were less than or equal to 64 bytes
in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.1 |
extremeWirelessIntfFrameSizeReXmit128This gives the number of frames retransmitted on this
interface which were between 65 and 128 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.2 |
extremeWirelessIntfFrameSizeReXmit256This gives the number of frames retransmitted on this
interface which were between 129 and 256 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.3 |
extremeWirelessIntfFrameSizeReXmit512This gives the number of frames retransmitted on this
interface which were between 257 and 512 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.4 |
extremeWirelessIntfFrameSizeReXmit1024This gives the number of frames retransmitted on this
interface which were between 513 and 1024 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.5 |
extremeWirelessIntfFrameSizeReXmit2048This gives the number of frames retransmitted on this
interface which were between 1025 and 2048 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.6 |
extremeWirelessIntfFrameSizeErrorTX64This gives the number of frames which failed to be
transmitted interface which were less than or equal
to 64 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.7 |
extremeWirelessIntfFrameSizeErrorTX128This gives the number of frames which failed to be
transmitted interface which were between 65 and 128
bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.8 |
extremeWirelessIntfFrameSizeErrorTX256This gives the number of frames which failed to be
transmitted interface which were between 129 and 256
bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.9 |
extremeWirelessIntfFrameSizeErrorTX512This gives the number of frames which failed to be
transmitted interface which were between 257 and 512
bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.10 |
extremeWirelessIntfFrameSizeErrorTX1024This gives the number of frames which failed to be
transmitted interface which were between 513 and 1024
bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.11 |
extremeWirelessIntfFrameSizeErrorTX2048This gives the number of frames which failed to be
transmitted interface which were between 1025 and 2048
bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.12 |
extremeWirelessIntfFrameSizeErrorRX64This gives the number of frames which had errors on
receive on this interface which were less than or equal
to 64 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.13 |
extremeWirelessIntfFrameSizeErrorRX128This gives the number of frames which had errors on
receive on this interface which were between 65 and
128 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.14 |
extremeWirelessIntfFrameSizeErrorRX256This gives the number of frames which had errors on
receive on this interface which were between 129 and
256 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.15 |
extremeWirelessIntfFrameSizeErrorRX512This gives the number of frames which had errors on
receive on this interface which were between 257 and
512 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.16 |
extremeWirelessIntfFrameSizeErrorRX1024This gives the number of frames which had errors on
receive on this interface which were between 513 and
1024 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.17 |
extremeWirelessIntfFrameSizeErrorRX2048This gives the number of frames which had errors on
receive on this interface which were between 1025 and
2048 bytes in length.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.40.1.18 |
extremeWirelessIntfFrameSpeedTableThere is one entry in this table for each virtual and
physical interface. Values for physical interfaces are
summations of the values for the constituent virtual
interfaces. SEQUENCE OF ExtremeWirelessIntfFrameSpeedEntry .1.3.6.1.4.1.1916.1.25.1.41 |
extremeWirelessIntfFrameSpeedEntry ExtremeWirelessIntfFrameSpeedEntry .1.3.6.1.4.1.1916.1.25.1.41.1 |
extremeWirelessIntfSpeedMgmtTX1This gives the number of management-type frames transmitted
on this interface at 1Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.1 |
extremeWirelessIntfSpeedMgmtTX2This gives the number of management-type frames transmitted
on this interface at 2Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.2 |
extremeWirelessIntfSpeedMgmtTX5p5This gives the number of management-type frames transmitted
on this interface at 5.5Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.3 |
extremeWirelessIntfSpeedMgmtTX6This gives the number of management-type frames transmitted
on this interface at 6Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.4 |
extremeWirelessIntfSpeedMgmtTX9This gives the number of management-type frames transmitted
on this interface at 9Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.5 |
extremeWirelessIntfSpeedMgmtTX11This gives the number of management-type frames transmitted
on this interface at 11Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.6 |
extremeWirelessIntfSpeedMgmtTX12This gives the number of management-type frames transmitted
on this interface at 12Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.7 |
extremeWirelessIntfSpeedMgmtTX18This gives the number of management-type frames transmitted
on this interface at 18Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.8 |
extremeWirelessIntfSpeedMgmtTX24This gives the number of management-type frames transmitted
on this interface at 24Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.9 |
extremeWirelessIntfSpeedMgmtTX36This gives the number of management-type frames transmitted
on this interface at 36Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.10 |
extremeWirelessIntfSpeedMgmtTX48This gives the number of management-type frames transmitted
on this interface at 48Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.11 |
extremeWirelessIntfSpeedMgmtTX54This gives the number of management-type frames transmitted
on this interface at 54Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.12 |
extremeWirelessIntfSpeedMgmtRX1This gives the number of management-type frames recieved
on this interface at 1Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.13 |
extremeWirelessIntfSpeedMgmtRX2This gives the number of management-type frames recieved
on this interface at 2Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.14 |
extremeWirelessIntfSpeedMgmtRX5p5This gives the number of management-type frames recieved
on this interface at 5.5Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.15 |
extremeWirelessIntfSpeedMgmtRX6This gives the number of management-type frames recieved
on this interface at 6Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.16 |
extremeWirelessIntfSpeedMgmtRX9This gives the number of management-type frames recieved
on this interface at 9Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.17 |
extremeWirelessIntfSpeedMgmtRX11This gives the number of management-type frames recieved
on this interface at 11Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.18 |
extremeWirelessIntfSpeedMgmtRX12This gives the number of management-type frames recieved
on this interface at 12Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.19 |
extremeWirelessIntfSpeedMgmtRX18This gives the number of management-type frames recieved
on this interface at 18Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.20 |
extremeWirelessIntfSpeedMgmtRX24This gives the number of management-type frames recieved
on this interface at 24Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.21 |
extremeWirelessIntfSpeedMgmtRX36This gives the number of management-type frames recieved
on this interface at 36Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.22 |
extremeWirelessIntfSpeedMgmtRX48This gives the number of management-type frames recieved
on this interface at 48Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.23 |
extremeWirelessIntfSpeedMgmtRX54This gives the number of management-type frames recieved
on this interface at 54Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.24 |
extremeWirelessIntfSpeedCtlTX1This gives the number of control-type frames transmitted
on this interface at 1Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.25 |
extremeWirelessIntfSpeedCtlTX2This gives the number of control-type frames transmitted
on this interface at 2Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.26 |
extremeWirelessIntfSpeedCtlTX5p5This gives the number of control-type frames transmitted
on this interface at 5.5Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.27 |
extremeWirelessIntfSpeedCtlTX6This gives the number of control-type frames transmitted
on this interface at 6Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.28 |
extremeWirelessIntfSpeedCtlTX9This gives the number of control-type frames transmitted
on this interface at 9Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.29 |
extremeWirelessIntfSpeedCtlTX11This gives the number of control-type frames transmitted
on this interface at 11Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.30 |
extremeWirelessIntfSpeedCtlTX12This gives the number of control-type frames transmitted
on this interface at 12Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.31 |
extremeWirelessIntfSpeedCtlTX18This gives the number of control-type frames transmitted
on this interface at 18Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.32 |
extremeWirelessIntfSpeedCtlTX24This gives the number of control-type frames transmitted
on this interface at 24Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.33 |
extremeWirelessIntfSpeedCtlTX36This gives the number of control-type frames transmitted
on this interface at 36Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.34 |
extremeWirelessIntfSpeedCtlTX48This gives the number of control-type frames transmitted
on this interface at 48Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.35 |
extremeWirelessIntfSpeedCtlTX54This gives the number of control-type frames transmitted
on this interface at 54Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.36 |
extremeWirelessIntfSpeedCtlRX1This gives the number of control-type frames recieved
on this interface at 1Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.37 |
extremeWirelessIntfSpeedCtlRX2This gives the number of control-type frames recieved
on this interface at 2Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.38 |
extremeWirelessIntfSpeedCtlRX5p5This gives the number of control-type frames recieved
on this interface at 5.5Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.39 |
extremeWirelessIntfSpeedCtlRX6This gives the number of control-type frames recieved
on this interface at 6Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.40 |
extremeWirelessIntfSpeedCtlRX9This gives the number of control-type frames recieved
on this interface at 9Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.41 |
extremeWirelessIntfSpeedCtlRX11This gives the number of control-type frames recieved
on this interface at 11Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.42 |
extremeWirelessIntfSpeedCtlRX12This gives the number of control-type frames recieved
on this interface at 12Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.43 |
extremeWirelessIntfSpeedCtlRX18This gives the number of control-type frames recieved
on this interface at 18Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.44 |
extremeWirelessIntfSpeedCtlRX24This gives the number of control-type frames recieved
on this interface at 24Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.45 |
extremeWirelessIntfSpeedCtlRX36This gives the number of control-type frames recieved
on this interface at 36Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.46 |
extremeWirelessIntfSpeedCtlRX48This gives the number of control-type frames recieved
on this interface at 48Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.47 |
extremeWirelessIntfSpeedCtlRX54This gives the number of control-type frames recieved
on this interface at 54Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.48 |
extremeWirelessIntfSpeedDataTX1This gives the number of data-type frames transmitted
on this interface at 1Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.49 |
extremeWirelessIntfSpeedDataTX2This gives the number of data-type frames transmitted
on this interface at 2Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.50 |
extremeWirelessIntfSpeedDataTX5p5This gives the number of data-type frames transmitted
on this interface at 5.5Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.51 |
extremeWirelessIntfSpeedDataTX6This gives the number of data-type frames transmitted
on this interface at 6Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.52 |
extremeWirelessIntfSpeedDataTX9This gives the number of data-type frames transmitted
on this interface at 9Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.53 |
extremeWirelessIntfSpeedDataTX11This gives the number of data-type frames transmitted
on this interface at 11Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.54 |
extremeWirelessIntfSpeedDataTX12This gives the number of data-type frames transmitted
on this interface at 12Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.55 |
extremeWirelessIntfSpeedDataTX18This gives the number of data-type frames transmitted
on this interface at 18Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.56 |
extremeWirelessIntfSpeedDataTX24This gives the number of data-type frames transmitted
on this interface at 24Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.57 |
extremeWirelessIntfSpeedDataTX36This gives the number of data-type frames transmitted
on this interface at 36Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.58 |
extremeWirelessIntfSpeedDataTX48This gives the number of data-type frames transmitted
on this interface at 48Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.59 |
extremeWirelessIntfSpeedDataTX54This gives the number of data-type frames transmitted
on this interface at 54Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.60 |
extremeWirelessIntfSpeedDataRX1This gives the number of data-type frames recieved
on this interface at 1Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.61 |
extremeWirelessIntfSpeedDataRX2This gives the number of data-type frames recieved
on this interface at 2Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.62 |
extremeWirelessIntfSpeedDataRX5p5This gives the number of data-type frames recieved
on this interface at 5.5Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.63 |
extremeWirelessIntfSpeedDataRX6This gives the number of data-type frames recieved
on this interface at 6Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.64 |
extremeWirelessIntfSpeedDataRX9This gives the number of data-type frames recieved
on this interface at 9Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.65 |
extremeWirelessIntfSpeedDataRX11This gives the number of data-type frames recieved
on this interface at 11Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.66 |
extremeWirelessIntfSpeedDataRX12This gives the number of data-type frames recieved
on this interface at 12Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.67 |
extremeWirelessIntfSpeedDataRX18This gives the number of data-type frames recieved
on this interface at 18Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.68 |
extremeWirelessIntfSpeedDataRX24This gives the number of data-type frames recieved
on this interface at 24Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.69 |
extremeWirelessIntfSpeedDataRX36This gives the number of data-type frames recieved
on this interface at 36Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.70 |
extremeWirelessIntfSpeedDataRX48This gives the number of data-type frames recieved
on this interface at 48Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.71 |
extremeWirelessIntfSpeedDataRX54This gives the number of data-type frames recieved
on this interface at 54Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.41.1.72 |
extremeWirelessIntfFrameSpeedErrorTableThere is one entry in this table for each virtual and
physical interface. Values for physical interfaces are
summations of the values for the constituent virtual
interfaces. SEQUENCE OF ExtremeWirelessIntfFrameSpeedErrorEntry .1.3.6.1.4.1.1916.1.25.1.42 |
extremeWirelessIntfFrameSpeedErrorEntry ExtremeWirelessIntfFrameSpeedErrorEntry .1.3.6.1.4.1.1916.1.25.1.42.1 |
extremeWirelessIntfSpeedReXmit1This gives the number of frames which were retransmitted on
this interface at 1 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.1 |
extremeWirelessIntfSpeedReXmit2This gives the number of frames which were retransmitted on
this interface at 2 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.2 |
extremeWirelessIntfSpeedReXmit5p5This gives the number of frames which were retransmitted on
this interface at 5 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.3 |
extremeWirelessIntfSpeedReXmit6This gives the number of frames which were retransmitted on
this interface at 6 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.4 |
extremeWirelessIntfSpeedReXmit9This gives the number of frames which were retransmitted on
this interface at 9 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.5 |
extremeWirelessIntfSpeedReXmit11This gives the number of frames which were retransmitted on
this interface at 11 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.6 |
extremeWirelessIntfSpeedReXmit12This gives the number of frames which were retransmitted on
this interface at 12 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.7 |
extremeWirelessIntfSpeedReXmit18This gives the number of frames which were retransmitted on
this interface at 18 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.8 |
extremeWirelessIntfSpeedReXmit24This gives the number of frames which were retransmitted on
this interface at 24 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.9 |
extremeWirelessIntfSpeedReXmit36This gives the number of frames which were retransmitted on
this interface at 36 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.10 |
extremeWirelessIntfSpeedReXmit48This gives the number of frames which were retransmitted on
this interface at 48 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.11 |
extremeWirelessIntfSpeedReXmit54This gives the number of frames which were retransmitted on
this interface at 54 Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.12 |
extremeWirelessIntfSpeedErrorTX1This gives the number of frames which were transmited with errors
on this interface at 1Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.13 |
extremeWirelessIntfSpeedErrorTX2This gives the number of frames which were transmited with errors
on this interface at 2Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.14 |
extremeWirelessIntfSpeedErrorTX5p5This gives the number of frames which were transmited with errors
on this interface at 5.5Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.15 |
extremeWirelessIntfSpeedErrorTX6This gives the number of frames which were transmited with errors
on this interface at 6Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.16 |
extremeWirelessIntfSpeedErrorTX9This gives the number of frames which were transmited with errors
on this interface at 9Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.17 |
extremeWirelessIntfSpeedErrorTX11This gives the number of frames which were transmited with errors
on this interface at 11Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.18 |
extremeWirelessIntfSpeedErrorTX12This gives the number of frames which were transmited with errors
on this interface at 12Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.19 |
extremeWirelessIntfSpeedErrorTX18This gives the number of frames which were transmited with errors
on this interface at 18Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.20 |
extremeWirelessIntfSpeedErrorTX24This gives the number of frames which were transmited with errors
on this interface at 24Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.21 |
extremeWirelessIntfSpeedErrorTX36This gives the number of frames which were transmited with errors
on this interface at 36Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.22 |
extremeWirelessIntfSpeedErrorTX48This gives the number of frames which were transmited with errors
on this interface at 48Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.23 |
extremeWirelessIntfSpeedErrorTX54This gives the number of frames which were transmited with errors
on this interface at 54Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.24 |
extremeWirelessIntfSpeedErrorRX1This gives the number of frames which were received with errors
on this interface at 1Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.25 |
extremeWirelessIntfSpeedErrorRX2This gives the number of frames which were received with errors
on this interface at 2Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.26 |
extremeWirelessIntfSpeedErrorRX5p5This gives the number of frames which were received with errors
on this interface at 5.5Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.27 |
extremeWirelessIntfSpeedErrorRX6This gives the number of frames which were received with errors
on this interface at 6Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.28 |
extremeWirelessIntfSpeedErrorRX9This gives the number of frames which were received with errors
on this interface at 9Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.29 |
extremeWirelessIntfSpeedErrorRX11This gives the number of frames which were received with errors
on this interface at 11Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.30 |
extremeWirelessIntfSpeedErrorRX12This gives the number of frames which were received with errors
on this interface at 12Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.31 |
extremeWirelessIntfSpeedErrorRX18This gives the number of frames which were received with errors
on this interface at 18Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.32 |
extremeWirelessIntfSpeedErrorRX24This gives the number of frames which were received with errors
on this interface at 24Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.33 |
extremeWirelessIntfSpeedErrorRX36This gives the number of frames which were received with errors
on this interface at 36Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.34 |
extremeWirelessIntfSpeedErrorRX48This gives the number of frames which were received with errors
on this interface at 48Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.35 |
extremeWirelessIntfSpeedErrorRX54This gives the number of frames which were received with errors
on this interface at 54Mbps.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.42.1.36 |
extremeWirelessIntfUtilizationTableThere is one entry in this table for each virtual and
physical interface. Values for physical interfaces are
summations of the values for the constituent virtual
interfaces. SEQUENCE OF ExtremeWirelessIntfUtilizationEntry .1.3.6.1.4.1.1916.1.25.1.43 |
extremeWirelessIntfUtilizationEntry ExtremeWirelessIntfUtilizationEntry .1.3.6.1.4.1.1916.1.25.1.43.1 |
extremeWirelessIntfUtilizationNavThis gives the instantaneous NAV value on this interface, or
some increasing-metric of utilization.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.43.1.1 |
extremeWirelessIntfUtilizationNoiseFloorThis gives the noise floor in dBm for this interface.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.43.1.2 |
extremeWirelessCounterMeasureSourceThis value is used in the counter measure traps to indicate the
reason that counter measures have been invoked.ro Enumeration .1.3.6.1.4.1.1916.1.25.1.44 |
extremeWirelessClientWPAStatsTableThis table contains information of the WPA state transitions
on a per-client basis. Rows are indexed first by virtual
interface, then by client MAC. SEQUENCE OF ExtremeWirelessClientWPAStatsEntry .1.3.6.1.4.1.1916.1.25.1.47 |
extremeWirelessClientWPAStatsEntryNote that ifIndex here is virtual ifIndex (SSID). ExtremeWirelessClientWPAStatsEntry .1.3.6.1.4.1.1916.1.25.1.47.1 |
extremeWirelessClientWPAStatsStartsNumber of starts of the WPA key exchange processro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.1 |
extremeWirelessClientWPAStatsPairwiseKeySuccessesNumber of successes in the pairwise key handshakero Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.2 |
extremeWirelessClientWPAStatsPairwiseKeyFailuresNumber of failures the pairwise key handshakero Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.3 |
extremeWirelessClientWPAStatsGroupKeySuccessesNumber of successes of the group key exchangero Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.4 |
extremeWirelessClientWPAStatsGroupKeyFailuresNumber of failures of the group key handshakero Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.5 |
extremeWirelessClientWPAStatsPairwiseKey1SendsNumber of times the first packet of the pairwise key exchange was sent.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.6 |
extremeWirelessClientWPAStatsPairwiseKey3SendsNumber of times the third packet of the pairwise key exchange was sent.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.7 |
extremeWirelessClientWPAStatsGroupKeySendsNumber of times the group key packet was sent.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.8 |
extremeWirelessClientWPAStatsEAPOLKeyReceivedInPairwise1KeyNumber of times an EAPOL Key packet was recieved after
sending the 1st pairwise key exchange packetro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.9 |
extremeWirelessClientWPAStatsEAPOLKeyReceivedInPairwise3KeyNumber of times an EAPOL Key packet was recieved after
sending the 3rd pairwise key exchange packetro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.10 |
extremeWirelessClientWPAStatsEAPOLKeyReceivedInGroupKeyNumber of times an EAPOL Key packet was recieved after
sending the group key packetro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.11 |
extremeWirelessClientWPAStatsDoubleEAPOLKeyReceivedNumber of times an EAPOL Key packet was recieved when already
processing a previous key packet.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.12 |
extremeWirelessClientWPAStatsEAPOLKeyIgnoresNumber of times an EAPOL Key packet was ignored.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.13 |
extremeWirelessClientWPAStatsEAPOLKeyErrorsNumber of times an EAPOL Key packet was errored.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.14 |
extremeWirelessClientWPAStatsEAPOLKeyAbortsNumber of times an EAPOL Key packet caused the WPA state machine to abort.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.15 |
extremeWirelessClientWPAStatsEAPOLKeyVerificationSuccessesNumber of times an EAPOL Key packet was verified correctly.ro Counter32 .1.3.6.1.4.1.1916.1.25.1.47.1.16 |
extremeWirelessOpaqueTable SEQUENCE OF ExtremeWirelessOpaqueEntry .1.3.6.1.4.1.1916.1.25.1.99 |
extremeWirelessOpaqueEntry ExtremeWirelessOpaqueEntry .1.3.6.1.4.1.1916.1.25.1.99.1 |
extremeWirelessClientDataro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.1 |
extremeWirelessPAEStatsDataro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.2 |
extremeWirelessPAEDiagDataro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.3 |
extremeWirelessScanResultsDataThis is the contents of the scan results table encoded
as a series of TLVs.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.4 |
extremeWirelessProbeInfoDataThis is the contents of the probe info table encoded
as a series of TLVs. Each item is encoded as the
entry above.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.5 |
extremeWirelessClientDiagDataThis is the contents of the client diag table encoded
as a series of TLVs. Each item is encoded as the
entry above.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.6 |
extremeWirelessClientAssocDataThis is the contents of the client assoc table encoded
as a series of TLVs. Each item is encoded as the
entry above. Note that since the MAC address is not a
member of the table (it is an index) it will be encoded
as type = 0.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.7 |
extremeWirelessClientAuthDataThis is the contents of the client auth table encoded
as a series of TLVs. Each item is encoded as the
entry above. Note that since the MAC address is not a
member of the table (it is an index) it will be encoded
as type = 0.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.8 |
extremeWirelessClientMACInfoDataThis is the contents of the client MAC info table
encoded as a series of TLVs. Each item is encoded
as the entry above. Note that since the MAC address
is not a member of the table (it is an index) it will
be encoded as type = 0.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.9 |
extremeWirelessSizeCounterDataThis is the contents of the client size counter table
encoded as a series of TLVs. Each item is encoded
as the entry above. Note that since the MAC address
is not a member of the table (it is an index) it will
be encoded as type = 0.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.10 |
extremeWirelessSpeedCounterDataThis is the contents of the client speed counter table
encoded as a series of TLVs. Each item is encoded
as the entry above. Note that since the MAC address
is not a member of the table (it is an index) it will
be encoded as type = 0.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.99.1.11 |
extremeWirelessTraceTableThis table contains one entry per wireless port. This
allows access to various stastics about the tracing mod
ule on that wireless port. SEQUENCE OF ExtremeWirelessTraceTableEntry .1.3.6.1.4.1.1916.1.25.1.100 |
extremeWirelessTraceEntry ExtremeWirelessTraceTableEntry .1.3.6.1.4.1.1916.1.25.1.100.1 |
extremeWirelessTraceMsgsOutThis gives the number of trace messages the system has
sent out to the syslog server. Suppressed messages are
not counted toward this total.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.100.1.1 |
extremeWirelessTraceBytesOutThis give the number of bytes total sent out by the
trace system. This is a simple sum of the string
lengths of all messages sent out.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.100.1.2 |
extremeWirelessTraceSuppressedThis variable is incremented whenever a message is
not sent out because the trace level of that system
is lower than the message level.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.100.1.3 |
extremeWirelessTraceOtherErrThis variable is incremented when a message is not
sent out due to internal errors (i.e. out of memory).ro INTEGER .1.3.6.1.4.1.1916.1.25.1.100.1.4 |
extremeWirelessTraceOpaqueThis is the opaque representation of the module table
to optimize retreival.ro OCTET STRING .1.3.6.1.4.1.1916.1.25.1.100.1.5 |
extremeWirelessTraceModuleTableThis table contains one entry per trace module. Each entry
is indexed by an arbitrary integer value. SEQUENCE OF ExtremeWirelessTraceModuleEntry .1.3.6.1.4.1.1916.1.25.1.101 |
extremeWirelessTraceModuleEntry ExtremeWirelessTraceModuleEntry .1.3.6.1.4.1.1916.1.25.1.101.1 |
extremeWirelessTraceModuleIdThis is an arbitrary integer index which is assigned to each
trace module. INTEGER .1.3.6.1.4.1.1916.1.25.1.101.1.1 |
extremeWirelessTraceModuleDescThis is a string which briefly describes the purpose of this
debug trace. It may include whitespace. An example is:
802.1x State Machinero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.101.1.2 |
extremeWirelessTraceModuleHeaderThis is a string which is prepended to the syslog messages
sent out by this debug level. It is short (5-6 characters)
and does not contain white space. (i.e. DOT1X)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.101.1.3 |
extremeWirelessTraceModuleLevelThis value is the current debug level for this module. A
lower value indicates that fewer messages will be generated
by the component. A write on this value will update the
current debug level.rw INTEGER .1.3.6.1.4.1.1916.1.25.1.101.1.4 |
extremeWirelessTraceModuleSuppressedThis value indicates the number of messages logged by
this module which have not been sent out because the
current log level is less than the level at which the
message should be logged.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.101.1.5 |
extremeWirelessTraceModuleMsgsOutThis value indicates the number messages which have
been logged by this component.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.101.1.6 |
extremeWirelessTraceModuleBytesOutThis value indicates the number of bytes which have
been logged by this component. This count includes
the header specified in extremeWirelessTraceModuleHeader.ro INTEGER .1.3.6.1.4.1.1916.1.25.1.101.1.7 |
extremeWirelessLogDiagTableThis table contains counters per-log level for the event log,
syslog and NVRAM subsystems for logging. SEQUENCE OF ExtremeWirelessLogDiagEntry .1.3.6.1.4.1.1916.1.25.1.102 |
extremeWirelessLogDiagEntryThere is one entry in this table per physical port. ExtremeWirelessLogDiagEntry .1.3.6.1.4.1.1916.1.25.1.102.1 |
extremeWirelessLogDiagEventLogTotalCountThis gives the total number of messages logged since the
last time the statistics were cleared.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.1 |
extremeWirelessLogDiagEventLogTotalEmergCountThis gives the total number of messages logged at the EMERG
level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.2 |
extremeWirelessLogDiagEventLogTotalAlertCountThis gives the total number of messages logged at the ALERT
level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.3 |
extremeWirelessLogDiagEventLogTotalCritCountThis gives the total number of messages logged at the CRIT
level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.4 |
extremeWirelessLogDiagEventLogTotalErrorCountThis gives the total number of messages logged at the ERROR
level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.5 |
extremeWirelessLogDiagEventLogTotalWarnCountThis gives the total number of messages logged at the WARN
level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.6 |
extremeWirelessLogDiagEventLogTotalNoticeCountThis gives the total number of messages logged at the NOTICE
level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.7 |
extremeWirelessLogDiagEventLogTotalInfoCountThis gives the total number of messages logged at the INFO
level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.8 |
extremeWirelessLogDiagEventLogTotalDebugCountThis gives the total number of messages logged at the DEBUG
level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.9 |
extremeWirelessLogDiagEventLogTotalSuppressedCountThis gives the total number of messages which were suppressed
due to log level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.10 |
extremeWirelessLogDiagEventLogTotalByteCountThis gives the total number of bytes logged by the logging
subsystem.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.11 |
extremeWirelessLogDiagSyslogTotalEventCountThis gives the total number of messages which have been sent
out to remote syslog servers.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.12 |
extremeWirelessLogDiagSyslogTotalSuppressedCountThis gives the total number of syslog messages which have been
suppressed due to log level.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.13 |
extremeWirelessLogDiagSyslogTotalByteCountThis gives the total number of bytes of syslog messages which have
been logged.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.14 |
extremeWirelessLogDiagNVRAMTotalEventCountTotal number of messages which have been logged to NVRAM.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.15 |
extremeWirelessLogDiagNVRAMTotalSuppressedCountTotal number of messages which have been suppressed by NVRAM
due to NVRAM threashold.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.16 |
extremeWirelessLogDiagNVRAMTotalDroppedCountTotal number of messages which have been dropped by the
NVRAM.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.17 |
extremeWirelessLogDiagNVRAMTotalByteCountTotal number of bytes which have been written to the NVRAM.ro Unsigned32 .1.3.6.1.4.1.1916.1.25.1.102.1.18 |
extremeWirelessLogDiagClearStatsSetting this value to TRUE causes the statistics to be reset to
0. Reading this value has no meaning.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.1.102.1.19 |
extremeLACGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.25.2.1 |
extremeAPTotalAuthFailuresThis variable gives the total number of
Authentication failures that have been seen by all
the wireless ports.ro INTEGER .1.3.6.1.4.1.1916.1.25.2.1.1 |
extremeAPTotalDetectedStationsThis variable gives the total number of detected
stations on all the wireless ports.ro INTEGER .1.3.6.1.4.1.1916.1.25.2.1.2 |
extremeAPTotalAssociatedStationsThis variable gives the total number of associated
stations on all the wireless ports.ro INTEGER .1.3.6.1.4.1.1916.1.25.2.1.3 |
extremeAPTotalAuthenticatedStationsThis variable gives the total number of authenticated
stations on all the wireless ports.ro INTEGER .1.3.6.1.4.1.1916.1.25.2.1.4 |
extremeWirelessCfgMgmtVLANThis value indicates the VLAN tag that should be
applied to all control traffic between the AP and
the platform.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.1.5 |
extremeWirelessCfgNetmaskThis value is the subnet of the Mgmt Vlanrw IpAddress .1.3.6.1.4.1.1916.1.25.2.1.6 |
extremeWirelessCfgGatewayThis value is assigned to the APs as the gateway
for the management vlan.rw IpAddress .1.3.6.1.4.1.1916.1.25.2.1.7 |
extremeWirelessCfgEnableWirelessTrapsIf set to TRUE the wireless port will send traps for
Authentication and association events.
If set to FALSE no traps will be generated.
Note: We always generate the wireless port status
traps.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.1.8 |
extremeWirelessCfgCountryCodeThis variable allows configuration of the
country code in which the AP will operate.
Setting this value will enable the AP to range
check frequency and other regulatory settings.rw ExtremeWirelessCountryCode .1.3.6.1.4.1.1916.1.25.2.1.10 |
extremeProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.25.2.2 |
extremeRFProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.25.2.2.1 |
extremeRFProfileTableThere is one entry in this table for each RF profile
defined on the LAC. Configuration for wireless intf.
should only be done by manipulating these variables.
Changes here will be reflected in the corresponding
802dot11 MIB variables (see references below).
On bootup this table should be populated with one
default entry for each supported type (A, G, etc). SEQUENCE OF ExtremeRFProfileEntry .1.3.6.1.4.1.1916.1.25.2.2.1.1 |
extremeRFProfileEntry ExtremeRFProfileEntry .1.3.6.1.4.1.1916.1.25.2.2.1.1.1 |
extremeRFProfileIndexInteger index for this table. This is here to avoid
having to index into the table via the string name. INTEGER .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.1 |
extremeRFProfileNameString name of this profile. The value |default| is
a special token and should not be allowed.rw DisplayString .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.2 |
extremeRFProfileTypeThis is the type of this RF profile. This
will decide the ranges of some of the values
(i.e. channel).rw Dot11Type .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.3 |
extremeRFProfileBeaconIntervalThis is the number of TU between beacon frames.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.5 |
extremeRFProfileDTIMrw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.6 |
extremeRFProfileFragLengthrw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.7 |
extremeRFProfileRTSThreshrw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.8 |
extremeRFProfilePreambleThis changes the 802 preamble expected by the
interface.rw Enumeration .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.9 |
extremeRFProfileShortRetryAttribute indicates the maximum number of transmission
attempts of a frame whose size is <= RTS.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.11 |
extremeRFProfileLongRetryAttribute indicates the maximum number of transmission
attempts of a frame whose size is > RTS.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.12 |
extremeRFProfileStatusStandard row-status semantics.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.1.1.1.13 |
extremeSecurityProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.25.2.2.2 |
extremeSecurityProfileTableThere is one entry in this table per security
profile on the LAC. Each profile is identified by a
string name. SEQUENCE OF ExtremeSecurityProfileEntry .1.3.6.1.4.1.1916.1.25.2.2.2.1 |
extremeSecurityProfileEntry ExtremeSecurityProfileEntry .1.3.6.1.4.1.1916.1.25.2.2.2.1.1 |
extremeSecurityProfileIndexThis is an integer index used instead of string
name. INTEGER .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.1 |
extremeSecurityProfileNameThis is a unique string name which identifies this
profile. The token |default| is special and should
not be allowed.rw DisplayString .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.2 |
extremeSecurityProfileESSNameThis is the desired ESS name.rw OCTET STRING .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.3 |
extremeSecurityProfileSSIDInBeaconSetting this value to true will have the channel
place the ssid in the beacon frame.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.4 |
extremeSecurityProfileDot11AuthModeSpecified whether to use open or shared authentication Dot11AuthMode .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.5 |
extremeSecurityProfileNetworkAuthModeThis specifies the authentication to use on top of dot11 mac authentication NetworkAuthMode .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.6 |
extremeSecurityProfileDataVlanThis specifies the VLAN to use in case it does not come back as a VSA or in case the IgnoreVSAVlan is set
to true INTEGER .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.7 |
extremeSecurityProfileIgnoreVSAVlanThis specifies if Vlan associations in VSAs from the radius server has to be ignored or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.8 |
extremeSecurityWEPDefaultKeyThis value indicates the index in extremeWEPKeyTable that
identifies the key this interface will use to decrypt packets.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.9 |
extremeSecurityProfileEncryptionLengthThis gives the size in bits of the key.
This variable defines the length of all WEP keys and also
the encryption to use in case of legacy dot1x.
If the encryption is set to none then no WEP encryption is set.rw Enumeration .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.10 |
extremeSecurityProfileStatusStandard row-creation semantics.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.2.1.1.11 |
extremeSecurityDot1xConfigTableThere is one entry in this table per security
profile on the LAC. It reflects the dot1x security config SEQUENCE OF ExtremeSecurityDot1xConfigEntry .1.3.6.1.4.1.1916.1.25.2.2.2.2 |
extremeSecurityDot1xConfigEntry ExtremeSecurityDot1xConfigEntry .1.3.6.1.4.1.1916.1.25.2.2.2.2.1 |
extremeSecurityKeyMgmtSuiteThis bitmask configures the authentication suites to be used.rw WPAKeyMgmtSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.2.2.2.2.1.1 |
extremeSecurityMcastCipherSuiteThis configures the cipher suite to use for mcast traffic. The cipher suite to use for unicast traffic
is derived from this using the following algorithm:
Mcast cipher = WEP (64/128), Unicast cipher = TKIP
Mcast cipher = TKIP, Unicast cipher = TKIP
Mcast cipher = AES, Unicast cipher = AES.
This therefore determines the max unicast cipher suite the client can use to associate with
this interface.rw WPACipherSet (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.2.2.2.2.1.2 |
extremeSecurityDot1xPSKValueThe Pre-Shared Key (PSK) for when RSN in PSK mode is
the selected authentication suite.rw OCTET STRING .1.3.6.1.4.1.1916.1.25.2.2.2.2.1.3 |
extremeSecurityDot1xPSKPassPhraseThe PSK, for when WPA in PSK mode is the selected authentication
suite, is configured by extremeSecurityKeyMgmtSuite.
An alternative manner of setting the PSK uses the password-to-key
algorithm defined in section XXX. This variable provides a means
to enter a pass phrase. When this object is written, the RSN entity
shall use the password-to-key algorithm specified in section XXX to
derive a pre-shared and populate extremeSecurityDot1xPSKValue with this key.
This object is logically write-only. Reading this variable shall
return unsuccessful status or null or zero.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.2.2.1.4 |
extremeSecurityDot1xReAuthPeriodNumber of seconds a clients authentication will last before
the AP automatically issues a reauthentication request.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.2.2.1.5 |
extremeSecurityGroupUpdateTimeOutThe time in minutes after which the RSN group
update handshake will be retried. The timer shall
start at the moment the group update message is
sent.rw Unsigned32 .1.3.6.1.4.1.1916.1.25.2.2.2.2.1.6 |
extremeSecurityPairwiseUpdateTimeOutThe time in minutes after which the RSN 4-way
handshake will be retried. The timer shall start at
the moment a 4-way message is sent.rw Unsigned32 .1.3.6.1.4.1.1916.1.25.2.2.2.2.1.7 |
extremeWEPKeyTableThis table contains per-profile WEP keys.
Reference ieee802dot11.1.2.3. SEQUENCE OF ExtremeWEPKeyEntry .1.3.6.1.4.1.1916.1.25.2.2.2.4 |
extremeWEPKeyEntry ExtremeWEPKeyEntry .1.3.6.1.4.1.1916.1.25.2.2.2.4.1 |
extremeWEPKeyIndexThere can be upto 8 wep keys for any wireless
interface. Four of the keys are to be used with
WEP Authentication, and the other four with MAC Auth. INTEGER .1.3.6.1.4.1.1916.1.25.2.2.2.4.1.1 |
extremeWEPKeyThis is a write-only wep key.rw OCTET STRING .1.3.6.1.4.1.1916.1.25.2.2.2.4.1.2 |
extremeWEPKeyStatusStandard row-creation semantics.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.2.4.1.3 |
extremeWirelessPhysInterfaceConfigTableThis table contains the configured bindings between
physical wireless interfaces and RF profiles and other
RF properties. There is one instance of a physical wireless
interface per radio on the AP.
Entries in this table have a duration that exceeds
the lifetime of entries in the wirelessPhysInterfaceCtlTable.
A configured binding spans the reset or removal of
a wireless interface.
Entries can be removed from this table by the user.
If there is a mismatch between a new wireless port
and a previously configured profile, the default
profile will be applied and this table will be
updated. SEQUENCE OF ExtremeWirelessPhysInterfaceConfigEntry .1.3.6.1.4.1.1916.1.25.2.2.3 |
extremeWirelessPhysInterfaceConfigEntry ExtremeWirelessPhysInterfaceConfigEntry .1.3.6.1.4.1.1916.1.25.2.2.3.1 |
extremeWirelessPhysInterfaceConfigRFProfileThis is the index into the extremeRFProfileTable for
the RF profile that this wireless interface is bound
to.
The default value is equivalent to the profile index for
the interface-appropriate default in the table.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.3.1.1 |
extremeWirelessPhysInterfaceConfigRFChannelThis is the RF channel which has been selected for this
wireless interface. It should be one of the supported
channels as given by the phy tables in the dot11 mib.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.3.1.2 |
extremeWirelessPhysInterfaceConfigSpeedThis is the speed to configure the interface at. A value of 0 indicates
automatic speed detection.rw Dot11Speed .1.3.6.1.4.1.1916.1.25.2.2.3.1.3 |
extremeWirelessPhysInterfaceConfigPowerLevelThis value specifies the tx power (in % of max power) to use.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.3.1.4 |
extremeWirelessVirtInterfaceConfigTableThis table contains the configured bindings between
virtual wireless interfaces and security profiles and other
security properties. There are upto 8 virtual interface for
each physical interface.
Entries in this table have a duration that exceeds
the lifetime of entries in the wirelessVirtInterfaceCtlTable.
A configured binding spans the reset or removal of
a wireless interface.
Entries can be removed from this table by the user. SEQUENCE OF ExtremeWirelessVirtInterfaceConfigEntry .1.3.6.1.4.1.1916.1.25.2.2.4 |
extremeWirelessVirtInterfaceConfigEntry ExtremeWirelessVirtInterfaceConfigEntry .1.3.6.1.4.1.1916.1.25.2.2.4.1 |
extremeWirelessVirtInterfaceConfigSecurityProfileThis is the index into the extremeSecurityProfileTable for
the security profile that this wireless interface is bound
to.
The default value is equivalent to the profile index for
the interface-appropriate default in the table.rw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.4.1.1 |
extremeWirelessVirtInterfaceConfigMaxClientsThe maximum number of clients that can associate with this virtual interface.ro INTEGER .1.3.6.1.4.1.1916.1.25.2.2.4.1.2 |
extremeWirelessVirtInterfaceConfigWirelessBridgingThis specifies whether wireless bridging is enabled on this interface.
If wireless bridging is enabled then traffic originating from a client on this
interface will be bridged to clients on the same VLAN on this or other
virtual interfaces that have wireless bridging enabled. So basically
wireless bridging should be enabled on both the source and the destination
virtual interface for traffic to be bridged.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.4.1.3 |
extremeWirelessVirtInterfaceConfigStateThis value specifies whether the virtual interface is active or notrw Enumeration .1.3.6.1.4.1.1916.1.25.2.2.4.1.4 |
extremeAntennaProfile OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.25.2.2.5 |
extremeAntennaProfileTableThere is one entry in this table per antenna
profile on the LAC. Each profile is identified by a
string name. SEQUENCE OF ExtremeAntennaProfileEntry .1.3.6.1.4.1.1916.1.25.2.2.5.1 |
extremeAntennaProfileEntry ExtremeAntennaProfileEntry .1.3.6.1.4.1.1916.1.25.2.2.5.1.1 |
extremeAntennaProfileIndexThis is an integer index used instead of string name. INTEGER .1.3.6.1.4.1.1916.1.25.2.2.5.1.1.1 |
extremeAntennaProfileNameThis is a unique string name which identifies this
profile. The token |default| is special and should
not be allowed.rw DisplayString .1.3.6.1.4.1.1916.1.25.2.2.5.1.1.2 |
extremeAntennaProfile2point4GHZGainThis specifies 2.4GHz gain value for detachable antenna in dbirw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.5.1.1.3 |
extremeAntennaProfile5GHZGainThis specifies 5GHz gain value for detachable antenna in dbirw INTEGER .1.3.6.1.4.1.1916.1.25.2.2.5.1.1.4 |
extremeAntennaProfileStatusStandard row-creation semantics.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.5.1.1.5 |
extremeWirelessRemoteConnectGlobalCfgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.25.2.2.6 |
extremeWirelessRemoteConnectGlobalBindingTypeGlobal Binding Tyerw WirelessRemoteConnectBindingType (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.2.2.6.1 |
extremeWirelessRemoteConnectBindingTableThis table specifies the RemoteConnect binding configuration for various ports. SEQUENCE OF ExtremeWirelessRemoteConnectBindingEntry .1.3.6.1.4.1.1916.1.25.2.2.7 |
extremeWirelessRemoteConnectBindingEntry ExtremeWirelessRemoteConnectBindingEntry .1.3.6.1.4.1.1916.1.25.2.2.7.1 |
extremeWirelessRemoteConnectBindingPortIndexThe index of this binding. This maps one-to-one with the value
specified in the CLI. For example, if you say v:1 in the CLI, then
this value should be 1. INTEGER .1.3.6.1.4.1.1916.1.25.2.2.7.1.1 |
extremeWirelessRemoteConnectBindingIfIndexThis is the IF index that is used in the extremeWirelessPortConfigTable
etc to refer to this RemoteConnect port.ro Integer32 .1.3.6.1.4.1.1916.1.25.2.2.7.1.2 |
extremeWirelessRemoteConnectBindingTypeThis is the type of binding. Based on this, one of the following columns will be valid.rw WirelessRemoteConnectBindingType (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.2.2.7.1.3 |
extremeWirelessRemoteConnectBindingMACThe MAC address of the AP that is bound to this virtual port.
This is valid only if the extremeWirelessRemoteConnectBindingType is set to
mac-addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.7.1.4 |
extremeWirelessRemoteConnectBindingSerialThe serial number of the AP that is bound to this virtual port.
This is valid only if the extremeWirelessRemoteConnectBindingType is set to
serial-numberrw OCTET STRING .1.3.6.1.4.1.1916.1.25.2.2.7.1.5 |
extremeWirelessRemoteConnectBindingIPAddressTypeThe IP address type of the AP that is bound to this virtual port.
This is valid only if the extremeWirelessRemoteConnectBindingType is set to
ip-addressrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.2.2.7.1.6 |
extremeWirelessRemoteConnectBindingIPAddressThe IP address of the AP that is bound to this virtual port.
This is valid only if the extremeWirelessRemoteConnectBindingType is set to
ip-addressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.2.2.7.1.7 |
extremeWirelessRemoteConnectBindingEnabledAn entry in this table can be created but left as disabled. If you
set this variable to True then the RemoteConnect controller will consider
this binding when trying to map APs to RemoteConnect ports. Else, it will
ignore it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.7.1.8 |
extremeWirelessRemoteConnectBindingBoundSpecifies if an AP has come up and has been matched to this binding.
If this is true, then the extremeWirelessPortStatus table will have
an entry for this RemoteConnect port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.7.1.9 |
extremeWirelessRemoteConnectBindingRowStatusRowStatus attribute. When this row is deleted, the binding goes awayrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.7.1.10 |
extremeWirelessRemoteConnectRedirectBindingTableThis table specifies the RemoteConnect redirection configuration for various ports. SEQUENCE OF ExtremeWirelessRemoteConnectRedirectBindingEntry .1.3.6.1.4.1.1916.1.25.2.2.8 |
extremeWirelessRemoteConnectRedirectBindingEntry ExtremeWirelessRemoteConnectRedirectBindingEntry .1.3.6.1.4.1.1916.1.25.2.2.8.1 |
extremeWirelessRemoteConnectRedirectBindingIndexThe index of this RedirectBinding. INTEGER .1.3.6.1.4.1.1916.1.25.2.2.8.1.1 |
extremeWirelessRemoteConnectRedirectBindingTypeThis is the type of RedirectBinding. Based on this, one of the following columns will be valid.rw WirelessRemoteConnectBindingType (EXTREME-BASE-MIB) .1.3.6.1.4.1.1916.1.25.2.2.8.1.2 |
extremeWirelessRemoteConnectRedirectBindingMACThe MAC address of the AP that will be redirected.
This is valid only if the extremeWirelessRemoteConnectRedirectBindingType is set to
mac-addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.8.1.3 |
extremeWirelessRemoteConnectRedirectBindingSerialThe serial number of the AP that is bound to this virtual port.
This is valid only if the extremeWirelessRemoteConnectRedirectBindingType
is set to serial-numberrw OCTET STRING .1.3.6.1.4.1.1916.1.25.2.2.8.1.4 |
extremeWirelessRemoteConnectRedirectBindingIPAddressTypeThe IP address type of the AP that will be redirected.
This is valid only if the extremeWirelessRemoteConnectRedirectBindingType
is set to ip-addressrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.2.2.8.1.5 |
extremeWirelessRemoteConnectRedirectBindingIPAddressThe IP address of the AP that will be redirected.
This is valid only if the extremeWirelessRemoteConnectRedirectBindingType
is set to ip-addressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.2.2.8.1.6 |
extremeWirelessRemoteConnectRedirectBindAttachSwitchIPAddrTypeThe IP address type of the slaverw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.2.2.8.1.7 |
extremeWirelessRemoteConnectRedirectBindAttachSwitchIPAddrThe IP address of the slaverw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.2.2.8.1.8 |
extremeWirelessRemoteConnectRedirectBindingEnabledAn entry in this table can be created but left as disabled. If you
set this variable to True then the RemoteConnect controller will consider
this RedirectBinding when trying to redirect APs. Else, it will
ignore it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.8.1.9 |
extremeWirelessRemoteConnectRedirectBindingNumRedirectsThe number of times this redirect has been invoked.ro Counter32 .1.3.6.1.4.1.1916.1.25.2.2.8.1.10 |
extremeWirelessRemoteConnectRedirectBindingRowStatusStandard row status semantics.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.8.1.11 |
extremeWirelessRemoteConnectDeviceDBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.25.2.2.9 |
extremeWirelessRemoteConnectDeviceDBTimeOutTimeout value for unbound APs entry in seconds. 0 for disablerw INTEGER (0 | 30..3600) .1.3.6.1.4.1.1916.1.25.2.2.9.1 |
extremeWirelessRemoteConnectUnboundAPsTableThis table contains the list of APs that could not be bound or redirected. SEQUENCE OF ExtremeWirelessRemoteConnectUnboundAPsEntry .1.3.6.1.4.1.1916.1.25.2.2.10 |
extremeWirelessRemoteConnectUnboundAPsEntry ExtremeWirelessRemoteConnectUnboundAPsEntry .1.3.6.1.4.1.1916.1.25.2.2.10.1 |
extremeWirelessRemoteConnectUnboundAPsIndexThe index of this table. INTEGER .1.3.6.1.4.1.1916.1.25.2.2.10.1.1 |
extremeWirelessRemoteConnectUnboundAPsMACThe MAC address of the unbound AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.10.1.2 |
extremeWirelessRemoteConnectUnboundAPsSerialThe serial number of the unbound APro OCTET STRING .1.3.6.1.4.1.1916.1.25.2.2.10.1.3 |
extremeWirelessRemoteConnectUnboundAPsIPAddressTypeThe IP address type of the unbound APro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.2.2.10.1.4 |
extremeWirelessRemoteConnectUnboundAPsIPAddressThe IP address of the unbound APro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.25.2.2.10.1.5 |
extremeWirelessRemoteConnectUnboundAPsNumAttemptsThe number of times this AP contacted this controller.ro Counter32 .1.3.6.1.4.1.1916.1.25.2.2.10.1.6 |
extremeWirelessRemoteConnectUnboundAPsRowStatusStandard row status semantics. Only valid value to set is destroy (6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.2.10.1.7 |
extremeWirelessPortCfgTableThis table contains one entry per wireless port that
the user has configured. The AP does not have to be
plugged in for the user to configure it via this
table. SEQUENCE OF ExtremeWirelessPortCfgEntry .1.3.6.1.4.1.1916.1.25.2.3 |
extremeWirelessPortCfgEntry ExtremeWirelessPortCfgEntry .1.3.6.1.4.1.1916.1.25.2.3.1 |
extremeWirelessPortIfIndexThis is the MIB-II ifIndex of the port this entry
describes.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1916.1.25.2.3.1.1 |
extremeWirelessPortCfgIpAddressThis value is assigned to the port for external
management.rw IpAddress .1.3.6.1.4.1.1916.1.25.2.3.1.2 |
extremeWirelessPortCfgLocationThis describes the physical location of the wireless
port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.3.1.3 |
extremeWirelessPortCfgDetectedTimeoutThis is the number of seconds a station can stay
in the detected station table without authenticating.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.2.3.1.4 |
extremeWirelessPortCfgClientWatchdogSetting this value to true will force the AP to
run a watch-dog process for system health.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.25.2.3.1.5 |
extremeWirelessPortLastChangeThe value of sysUpTime when the port entered its last statero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1916.1.25.2.3.1.6 |
extremeWirelessPortStateThe current state of the wireless part of this port.
enabled : Port is actively looking for wireless
interfaces.
disabled : Port is administratively unable to detect
new interfaces.
reset : Interfaces have been detected and are
being brought up (access point is booting).
addressing : IP Address is being assigned.
register : Interfaces are registering for service
syncing : Interfaces are retrieving their
configuration and updating their state.
online : Interfaces are operational.
If an error occurs the wireless port will
transistion to the error state.ro Enumeration .1.3.6.1.4.1.1916.1.25.2.3.1.7 |
extremeWirelessPortAntennaTypeThis is the type of the Antenna for Detachable product.
For Altitude-2d series, further selection is available
through this variable.rw ExtremeWirelessAntennaType .1.3.6.1.4.1.1916.1.25.2.3.1.8 |
extremeWirelessPortAntennaLocationThis specifies the location the detachable antenna.rw ExtremeWirelessAntennaLocation .1.3.6.1.4.1.1916.1.25.2.3.1.9 |
extremeAPTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1916.4.5 |
extremeAPTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1916.4.5.0 |
extremeWirelessPortStateChangeThis trap is generated when a wireless port moves
into enabled, disabled or online. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.1 |
extremeWirelessPortBootFailureThis trap is sent by the platform if a wireless
port fails to boot too many times. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.2 |
extremeWirelessClientStationAgedOutThis trap is generated when a client is aged out
of the table. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.3 |
extremeWirelessNetloginClientAssociatedThis trap is generated when a client has associated
to an interface that is web based network login
enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.4 |
extremeWirelessAPAddedThis is generated when a new AP is added to the
scan results table. It will ony be generated if
the value of extremeWirelessScanSendAPAddedTrap
is true. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.5 |
extremeWirelessAPRemovedThis is generated when an AP is removed from the
scan results table. It will ony be generated if
the value of extremeWirelessScanSendAPRemovedTrap
is true. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.6 |
extremeWirelessAPUpdatedThis is generated when the IEs recorded for an AP
in the scan results table change. It will only be
generated if the value of SendAPUpdatedTrap is true. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.7 |
extremeWirelessProbeInfoAddedThis is generated when a new station is added to the
probe info table. It will only be generated if the
value of extremeWirelessProbeInfoSendAddedTrap is true. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.8 |
extremeWirelessProbeInfoRemovedThis is generated when a station is removed from the
probe info table. It will only be generated if the
value of extremeWirelessProbeInfoSendRemovedTrap is
true. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.9 |
extremeWirelessOffChannelScanStartedThis is generated when an off-channel scan starts
running. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.10 |
extremeWirelessOffChannelScanFinishedThis is generated when an off-channel scan finishes
running. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.11 |
extremeWirelessCounterMeasureStartedThis trap is generated when counter measures are started
on a wireless interface. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.12 |
extremeWirelessCounterMeasureStoppedThis trap is generated when counter measures are stopped
on a wireless interface. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.13 |
extremeWirelessInterfaceChannelRescanThis trap is generated when a wireless interface tries to
autoselect a channel. It indicates whether a particular channel scan was
successful, or if it failed then the reason for the failure. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.5.0.14 |