EXTREME-MPLS-MIB
Extreme extensions to mplsTeStdMIB
Main OID:
extremeMplsMIB.1.3.6.1.4.1.1916.1.37
51
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
extremeMplsMIBExtreme extensions to mplsTeStdMIB MODULE-IDENTITY .1.3.6.1.4.1.1916.1.37 |
extremeMplsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.37.0 |
extremePwStatusChangeThis notification is generated when the pwOperStatus object for a pseudowire transitions from up(1) to down(2) or from down(2) to up(1). NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.37.0.1 |
extremePwDeletedThis notification is generated when a PW has been deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.37.0.2 |
extremeMplsTunnelStatusChangeThis notification is generated when the mplsTunnelOperStatus object for a te-lsp transitions from up(1) to down(2) or from down(2) to up(1). This new state is indicated by the included value of mplsTunnelOperStatus. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.37.0.3 |
extremeMplsLdpSessionStatusChangeThis notification is generated when the value of 'mplsLdpSessionState' (rfc3815) enters or leaves the 'operational(5)' state. NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.37.0.4 |
extremeVplsStatusChangeThis notification is generated to inform recepients of the state of the Vpls. When all pseudowires in this Vpls are up or ready and the attachment circuit is up, extremeVplsNotifStatusOperStatus is set to vplsOperStatusUp(1) in the notification. When at least one pseudowire in this Vpls is up or ready and the attachment circuit is up, extremeVplsNotifStatusOperStatus is set to vplsOperStatusDegraded(2) in the notification. When all pseudowires in this Vpls are down or the attachment circuit is down, extremeVplsNotifStatusOperStatus is set to vplsOperStatusDown(3) in the notification. Once a notification has been sent with vplsOperStatusDegraded(2), no further notification will be sent untill extremeVplsNotifStatusOperStatus transitions to vplsOperStatusUp(1) or vplsOperStatusDown(3). NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.37.0.5 |
extremeMplsScalars OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.37.1 |
extremePwUpDownNotificationEnableIf this object is set to true(1), then it enables the emission of pwUp and pwDown notifications; otherwise these notifications are not emitted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.37.1.5 |
extremePwDeletedNotificationEnableIf this object is set to true(1), then it enables the emission of pwDeleted notification; otherwise this notification is not emitted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.37.1.6 |
extremePwNotificationMaxRateThis variable indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these notifications during that period, or may queue them until an appropriate time. A value of 0 means no throttling is applied and events may be notified at the rate at which they occur.rw Unsigned32 .1.3.6.1.4.1.1916.1.37.1.7 |
extremePwNotificationPwIndexThis variable indicates the index of the pseudowire that either went up, down, or was deleted as reported by the corresponding notification. To obtain further information regarding the pseudowire, the network administrator should look up the corresponding pseudowire entry in pwTable (RFC 5601).ro PwIndexType (PW-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.1.8 |
extremePwNotificationPwOperStatusThis variable is used to report the value of pwOperStatus in pwTable (RFC 5601) associated with the pseudowire that went up or down.ro PwOperStatusTC (PW-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.1.9 |
extremePwNotificationPeerAddrTypeDenotes the address type of the peer node.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.37.1.10 |
extremePwNotificationPeerAddrThis object contains the value of the peer node address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1916.1.37.1.11 |
extremeMplsNotifTunnelIndexUniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Contains part of the index of a te tunnel that underwent state change. The same tunnel can also be looked up in the te mib.ro MplsTunnelIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.1.12 |
extremeMplsNotifTunnelInstanceUniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs.ro MplsTunnelInstanceIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.1.13 |
extremeMplsNotifTunnelIngressLSRIdIdentity of the ingress LSR associated with this tunnel instance.ro MplsExtendedTunnelId (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.1.14 |
extremeMplsNotifTunnelEgressLSRIdIdentity of the egress LSR associated with this tunnel instance.ro MplsExtendedTunnelId (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.1.15 |
extremeMplsNotifTunnelAdminStatusReports the desired operational status of this tunnel.ro Enumeration .1.3.6.1.4.1.1916.1.37.1.16 |
extremeMplsNotifTunnelOperStatusReports the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.ro Enumeration .1.3.6.1.4.1.1916.1.37.1.17 |
extremeMplsNotifLdpEntityLdpIdThe LDP identifier. This is the primary index to identify a row in the mplsLdpEntityTable (RFC 3815).ro MplsLdpIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.1.18 |
extremeMplsNotifLdpEntityIndexThis index is used as a secondary index to uniquely identify a row in the mplsLdpEntityTable (RFC 3815). This object is meaningful to some but not all, LDP implementations.ro IndexInteger .1.3.6.1.4.1.1916.1.37.1.19 |
extremeMplsNotifLdpPeerLdpIdThe LDP identifier of this LDP Peer.ro MplsLdpIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.1.20 |
extremeMplsNotifLdpSessionStateThe current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior.ro Enumeration .1.3.6.1.4.1.1916.1.37.1.21 |
extremeMplsNotifLdpSessionDiscontinuityTimeThe initial value of this object is the value of sysUpTime when the entry was created in this table. Subsequent notifications report the time when the session between a given Entity and Peer goes away or a new session is established.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1916.1.37.1.22 |
extremeVplsNotifConfigIndexUnique index for the conceptual row identifying a VPLS service in the vplsConfigTable.ro Unsigned32 (1.. 2147483647) .1.3.6.1.4.1.1916.1.37.1.23 |
extremeVplsNotifConfigVpnIdThis objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service. This object has the same value as vplsConfigVpnId in the vplsConfigTable for an index value equal to extremeVplsNotifConfigIndex sent in the notification.ro VPNIdOrZero (VPN-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.1.24 |
extremeVplsNotifConfigAdminStatusThe administrative state of the VPLS service. This object has the same value as vplsConfigAdminStatus in the vplsConfigTable for an index value equal to extremeVplsNotifConfigIndex sent in the notification.ro Enumeration .1.3.6.1.4.1.1916.1.37.1.25 |
extremeVplsNotifStatusOperStatusThe current operational state of this VPLS Service. A value of up(1) indicates that all pseudo-wires for this vpls are up and the attachment circuit is up. A value of degraded(2) indicates that at least one pseudo-wires for this vpls is up and the attachment circuit is up. A value of down(3) indicates that all pseudo-wires for this vpls are down or the attachment circuit is down.ro Enumeration .1.3.6.1.4.1.1916.1.37.1.26 |
extremeVplsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.37.3 |
extremeVplsConfigTableThis table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS). SEQUENCE OF ExtremeVplsConfigEntry .1.3.6.1.4.1.1916.1.37.3.1 |
extremeVplsConfigEntryA row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by extremeVplsConfigIndex, which uniquely identifies a single VPLS. ExtremeVplsConfigEntry .1.3.6.1.4.1.1916.1.37.3.1.1 |
extremeVplsConfigIndexUnique index for the conceptual row identifying a VPLS service. Unsigned32 (1.. 2147483647) .1.3.6.1.4.1.1916.1.37.3.1.1.1 |
extremeVplsConfigRedunTypeThis variable indicates the redundancy type for this vpls. Redundacy states can be None, EAPS, ESRP and STP.ro Enumeration .1.3.6.1.4.1.1916.1.37.3.1.1.2 |
extremeVplsConfigEAPSStatusThis variable indicates the EAPS redundancy status for this vpls. It displays Protected if the VLAN is protected, else Not Protected. EAPS Status displays the following values Waiting - if we are waiting on EAPS status Connected - if EAPS ring status is connected to VLAN. PW will not be installed in this state. Disconnected - if EAPS ring state is disconnected. PW will be installed in this state. Unknown - if EAPS is not foundro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.1916.1.37.3.1.1.3 |
extremeVplsConfigESRPStateThis variable indicates the ESRP redundancy state for this vpls. ESRP states can have two values : Master and Slave PW will only be installed when ESRP is in the Master state.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.1916.1.37.3.1.1.4 |
extremeVplsStatusTableThis table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS). SEQUENCE OF ExtremeVplsStatusEntry .1.3.6.1.4.1.1916.1.37.3.2 |
extremeVplsStatusEntryA row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by extremeVplsConfigIndex, which uniquely identifies a single VPLS. ExtremeVplsStatusEntry .1.3.6.1.4.1.1916.1.37.3.2.1 |
extremeVplsStatusIndexUnique index for the conceptual row identifying a VPLS service. Unsigned32 (1.. 2147483647) .1.3.6.1.4.1.1916.1.37.3.2.1.1 |
extremeVplsOperStatusThis variable indicates the vpls operation Status. This is a special status provided which has values up,down and degraded. This is different from the vpls pw status shown in the standard mib. Up - all PWs are in the Up or Ready state. Degraded - Atleast one PW is in the Up or Ready state. Down - None of the PWs are in Up or Ready state.ro Enumeration .1.3.6.1.4.1.1916.1.37.3.2.1.2 |
extremeVplsPeerTableThis table provides information for monitoring Virtual Private Lan Services(VPLS) Peer Entries. SEQUENCE OF ExtremeVplsPeerEntry .1.3.6.1.4.1.1916.1.37.3.3 |
extremeVplsPeerEntryThis entry contains information of all the peers belonging to a particular VPLS ExtremeVplsPeerEntry .1.3.6.1.4.1.1916.1.37.3.3.1 |
extremeVplsIndexUnique index for the conceptual row identifying a VPLS service. Unsigned32 (1.. 2147483647) .1.3.6.1.4.1.1916.1.37.3.3.1.1 |
extremeVplsPwBindIndexSecondary Index for the conceptual row identifying a pseudowire within the PwEntry which MUST match an entry from the PW-STD-MIB's PwTable which represents an already-provisioned pseuwowire that is then associated with this VPLS instance. PwIndexType (PW-TC-STD-MIB) .1.3.6.1.4.1.1916.1.37.3.3.1.2 |
extremePwInstalledBoolean true or false indicating if PW is installedro Enumeration .1.3.6.1.4.1.1916.1.37.3.3.1.3 |
extremePwModeThe peer mode of this pw. It indicates its current mode and the mode of the switch it is connected to. It can have the following values : Core-to-core, Core-to-Spoke and Spoke-to-Core.ro Enumeration .1.3.6.1.4.1.1916.1.37.3.3.1.4 |
extremePwConfiguredRoleThe configured role of this pw. It applies only in the case the PWMode is Core-to-core. In this case, the configured role can either be Primary or Secondary. For all the other PW modes, the configured role does not apply.ro Enumeration .1.3.6.1.4.1.1916.1.37.3.3.1.5 |
extremeL2VpnMplsNotificationHandler OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.37.4 |
extremeMPLSTrapsEnableMpls Trap status. If enabled then all the mpls related traps will be sent out.rw Enumeration .1.3.6.1.4.1.1916.1.37.4.1 |
extremeL2VpnTrapsEnableL2Vpn Trap status. If enabled then all the l2vpn related traps will be sent out.rw Enumeration .1.3.6.1.4.1.1916.1.37.4.2 |