EXTREME-EAPS-MIB
AI MIB Summary
The EXTREME-EAPS-MIB monitors Ethernet Automatic Protection Switching (EAPS) ring topology states, master/slave node roles, and protection switching counters on Extreme Networks switches to facilitate rapid failover detection and recovery.
Ethernet Automatic Protection Switching information.
Main OID:
extremeEaps.1.3.6.1.4.1.1916.1.18
72
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
72 total| Object Name |
|---|
extremeEapsEthernet Automatic Protection Switching information. MODULE-IDENTITY .1.3.6.1.4.1.1916.1.18 |
SNMPv2-SMIEthernet Automatic Protection Switching information. Unknown .1.3.6.1.4.1.1916.1.18 |
extremeEapsTableThis table contains EAPS information about all EAPS
domains on this device. SEQUENCE OF ExtremeEapsEntry .1.3.6.1.4.1.1916.1.18.1 |
extremeEapsEntryAn individual entry of this table contains EAPS
information related to that EAPS domain. ExtremeEapsEntry .1.3.6.1.4.1.1916.1.18.1.1 |
extremeEapsNameThe EAPS domain name.ro DisplayString .1.3.6.1.4.1.1916.1.18.1.1.1 |
extremeEapsModeThis indicates the mode of the EAPS domain.rw EapsDomainMode .1.3.6.1.4.1.1916.1.18.1.1.2 |
extremeEapsStateThis indicates the current EAPS state of this EAPS
domain.ro EapsDomainState .1.3.6.1.4.1.1916.1.18.1.1.3 |
extremeEapsFailedFlagThis indicates the status of the failed flag.
If the failed timer expires while its expiry action is
configured to sendAlert, this failed flag is set.
It is then cleared when the failed timer stops expiring, or
the expiry action is configured to openSecondaryPort.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.1.1.4 |
extremeEapsEnabledThis indicated if this domain has been enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.1.1.5 |
extremeEapsPrimaryPortThis indicates the EAPS domain's primary ring-port.
Value of 0 indicates the primary port is still not
configuredrw EapsRingPort .1.3.6.1.4.1.1916.1.18.1.1.6 |
extremeEapsSecondaryPortThis indicates the EAPS domain's secondary ring-port.
Value of 0 indicates the secondary port is still not
configuredrw EapsRingPort .1.3.6.1.4.1.1916.1.18.1.1.7 |
extremeEapsHelloTimerThis indicates the EAPS domain's hello timer's value
in seconds.rw INTEGER .1.3.6.1.4.1.1916.1.18.1.1.8 |
extremeEapsFailedTimerThis indicates the EAPS domain's failed timer's value
in seconds.rw INTEGER .1.3.6.1.4.1.1916.1.18.1.1.9 |
extremeEapsFailedTimerExpiryActionThis indicates the action taken by the domain when the
fail timer expires.
If the action is to sendAlert, then a SNMP trap -
extremeEapsFailTimerExpFlagSet - will be sent, and the
secondary port will continue to remain in blocking state.
If the action is to openSecondaryPort, then the secondary
port will open and be set to forwarding state.rw EapsFailTimerExpiryAction .1.3.6.1.4.1.1916.1.18.1.1.10 |
extremeEapsUnconfigRingPortThis specifies which EAPS domain port is being
unconfigured.
Value of 1, indicates unconfigure the primary port.
Value of 2, indicates unconfigure secondary port.rw EapsPortType .1.3.6.1.4.1.1916.1.18.1.1.11 |
extremeEapsPrimaryStatusThis indicates the status of the EAPS domain's primary
ring-port.ro EapsDomainPortStatus .1.3.6.1.4.1.1916.1.18.1.1.12 |
extremeEapsSecondaryStatusThis indicates the status of the EAPS domain's secondary
ring-port.ro EapsDomainPortStatus .1.3.6.1.4.1.1916.1.18.1.1.13 |
extremeEapsProtectedVlansCountThis gives the count of the number of vlans that are
being protected by this EAPS domain.ro INTEGER .1.3.6.1.4.1.1916.1.18.1.1.14 |
extremeEapsRowStatusThe status of this entry as per standard RowStatus
conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.1.1.15 |
extremeEapsHelloTimerMsThis indicates the milliseconds portion of the EAPS domain's hello timer value
in milliseconds.ro INTEGER .1.3.6.1.4.1.1916.1.18.1.1.16 |
extremeEapsPriorityThis gives the priority of the domain. Used along with spatial re-use to prioritize
handling of domains during a topology change.rw EapsDomainPriority .1.3.6.1.4.1.1916.1.18.1.1.17 |
extremeEapsPrevStateThis indicates the previous EAPS state of this EAPS
domain. Used in state change traps information.ro EapsDomainState .1.3.6.1.4.1.1916.1.18.2 |
extremeEapsGlobalInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.18.3 |
extremeEapsGlobalEnabledIndicates if EAPS is enabled globally on the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.3.1 |
extremeEapsGlobalFastConvergenceIndicates if Fast Convergence is enabled globally on the
switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.3.2 |
extremeEapsLastConfigurationChangeIndicates the last time there was any change in
EAPS configuration on the switch.ro Unsigned32 .1.3.6.1.4.1.1916.1.18.3.3 |
extremeEapsLastStatusChangeIndicates the last time there was any change in
EAPS domain, EAPS port, shared port, or segment status on
the switch. Time changes for extremeEapsState,
extremeEapsSharedPortState, extremeEapsSharedPortSegmentStatus,
extremeEapsFailedFlag, extremeEapsPrimaryStatus,
extremeEapsSecondaryStatus, extremeEapsSharedPortNbrStatus,
extremeEapsSharedPortRootBlockerStatus,
extremeEapsSharedPortSegmentFlagFailed.ro Unsigned32 .1.3.6.1.4.1.1916.1.18.3.4 |
extremeEapsStatusTrapCountIndicates the number of status traps sent out since the switch
booted. Status traps counted include
extremeEapsSharedPortStateChange
extremeEapsRootBlockerStatusChange
extremeEapsPortStatusChange
extremeEapsStateChange
extremeEapsFailTimerExpFlagSet
extremeEapsFailTimerExpFlagClear.ro Counter32 .1.3.6.1.4.1.1916.1.18.3.5 |
extremeEapsGlobalMulticastAddRingPortsRing ports are added to existing multicast groups for protected
vlans on a topology change event.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.3.6 |
extremeEapsGlobalMulticastSendIGMPQueryIGMP Query is sent out on all protected vlans on a topology change
event.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.3.7 |
extremeEapsGlobalMulticastTempFloodingTemporary Multicast flooding occurs on all protected vlans on a
topology change event.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.3.8 |
extremeEapsGlobalMulticastTempFloodingDurationThe duration at which temporary Multicast flooding will occur.rw Unsigned32 .1.3.6.1.4.1.1916.1.18.3.9 |
extremeEapsMbrVlanTableThis table contains the control and all protected vlans
added to each EAPS domain on this device.
There can be only 1 control vlan, while many
protected vlans added to a EAPS domain. SEQUENCE OF ExtremeEapsMbrVlanEntry .1.3.6.1.4.1.1916.1.18.4 |
extremeEapsMbrVlanEntryAn individual entry of this table correlates a EAPS
domain with a VLAN added to it and its type whether it is
control or protected. ExtremeEapsMbrVlanEntry .1.3.6.1.4.1.1916.1.18.4.1 |
extremeEapsMbrVlanNameThe member VLAN's name.ro DisplayString .1.3.6.1.4.1.1916.1.18.4.1.1 |
extremeEapsMbrVlanTypeThe member VLAN's type whether it is control or
protected.ro EapsMbrVlanType .1.3.6.1.4.1.1916.1.18.4.1.2 |
extremeEapsMbrVlanTagThe member VLAN's Vlan Id tag.ro INTEGER .1.3.6.1.4.1.1916.1.18.4.1.3 |
extremeEapsMbrVlanRowStatusThe status of this entry as per standard RowStatus
conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.4.1.4 |
extremeEapsSharedPortTableThis table contains all EAPS shared ports configured
on this device. SEQUENCE OF ExtremeEapsSharedPortEntry .1.3.6.1.4.1.1916.1.18.5 |
extremeEapsSharedPortEntryAn individual entry of this table describes the
configuration of an EAPS shared port. ExtremeEapsSharedPortEntry .1.3.6.1.4.1.1916.1.18.5.1 |
extremeEapsSharedPortIfIndexThe ifIndex of a port configured as an EAPS shared port.ro EapsRingPort .1.3.6.1.4.1.1916.1.18.5.1.1 |
extremeEapsSharedPortModeThe configured mode of the EAPS shared port.rw EapsSharedPortMode .1.3.6.1.4.1.1916.1.18.5.1.2 |
extremeEapsSharedPortLinkIdThe configured Link Id for the EAPS shared port.
Each common link in the entire network will be assigned a
unique link Id. Each shared-port instance on either end
of this common link will be configured with this
link Id.
Value of 0 indicates the link Id is still not configured.rw INTEGER .1.3.6.1.4.1.1916.1.18.5.1.3 |
extremeEapsSharedPortSegmentTimerExpiryActionThis indicates the action taken by the EAPS Shared port
instance when a segment timer expires.
If the action is sendAlert, then when the segment timer
expires, an SNMP trap will be sent, and the segment will
remain in Up state, with the failed flag set to True.
If the action is segmentDown, then when the timer expires,
the segment will be set to Down state.rw EapsSharedPortSegmentTimerExpiryAction .1.3.6.1.4.1.1916.1.18.5.1.4 |
extremeEapsSharedPortStateThis indicates the state of the EAPS Shared port instance.
The states can be idle(0), ready(1), blocking(2), and
preforwarding(3).ro EapsSharedPortState .1.3.6.1.4.1.1916.1.18.5.1.5 |
extremeEapsSharedPortNbrStatusThis indicates the status of reachabilty to the neighbor
on the other end of the Shared-segment.
If the neighbor on the other end is reachable with
matching link-id and different modes, then the status is
NeighborUp.
If the neighbor is not reachable, this status is
NeighborDown.
If the neighbor is reachable, but with the same mode,
then this status is set to Error.ro EapsSharedPortNeighborStatus .1.3.6.1.4.1.1916.1.18.5.1.6 |
extremeEapsSharedPortDomainsCountThis gives the count of the number of EAPS domains that
are sharing this shared-port.ro INTEGER .1.3.6.1.4.1.1916.1.18.5.1.7 |
extremeEapsSharedPortProtectedVlansCountThis gives the count of the number of vlans that are
being protected by this shared-port instance.ro INTEGER .1.3.6.1.4.1.1916.1.18.5.1.8 |
extremeEapsSharedPortRootBlockerStatusIf this shared port instance is not in Root blocker state,
the status is False.
If the shared port is in Root blocker state, and its
path detect message is being returned to it, it is in
Active state.
If the shared port is in Root blocker state, but its
path detect message is not making it back to itself, then
its root blocker status is Inactive.ro EapsSharedPortRootBlockerStatus .1.3.6.1.4.1.1916.1.18.5.1.9 |
extremeEapsSharedPortRootBlockerIdThis is the Link Id of the Root Blocker in the entire
network.
If there is no root blocker in the network, this value
is 65535.ro INTEGER .1.3.6.1.4.1.1916.1.18.5.1.10 |
extremeEapsSharedPortRowStatusThe status of this entry as per standard RowStatus
conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.5.1.11 |
extremeEapsSharedPortSegmentHealthIntervalInterval at which health check PDUs are sent out each segment port.ro INTEGER .1.3.6.1.4.1.1916.1.18.5.1.12 |
extremeEapsSharedPortSegmentTimeoutTime in seconds where segment fail timer expires, fail flag is set, and
expiry action is taken.ro INTEGER .1.3.6.1.4.1.1916.1.18.5.1.13 |
extremeEapsSharedPortCommonPathFailedFlagShared port link fail timer expired, but our shared port link is up.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.5.1.14 |
extremeEapsSharedPortCommonPathHealthIntervalInterval at which health check PDUs are sent out shared port.ro INTEGER .1.3.6.1.4.1.1916.1.18.5.1.15 |
extremeEapsSharedPortCommonPathTimeoutTime in seconds where shared link fail timer expires and fail flag is setro INTEGER .1.3.6.1.4.1.1916.1.18.5.1.16 |
extremeEapsSharedPortSegmentTableThis table contains the EAPS shared port's segments
information SEQUENCE OF ExtremeEapsSharedPortSegmentEntry .1.3.6.1.4.1.1916.1.18.6 |
extremeEapsSharedPortSegmentEntryAn individual entry of this table describes the EAPS
shared port's segment information. It will describe the
EAPS domain, the segment's status, and other information
related to neighboring node's blocking status. ExtremeEapsSharedPortSegmentEntry .1.3.6.1.4.1.1916.1.18.6.1 |
extremeEapsSharedPortSegmentPortThe segment port on a segment which is part of an EAPS
shared port.ro EapsRingPort .1.3.6.1.4.1.1916.1.18.6.1.1 |
extremeEapsSharedPortSegmentStatusThe status of a segment port which is part of an EAPS
shared port.ro EapsSharedPortSegmentStatus .1.3.6.1.4.1.1916.1.18.6.1.2 |
extremeEapsSharedPortSegmentFailedFlagThe status of the failed flag on a segment port which is
part of an EAPS shared port.
This flag will be set to TRUE if the segment's fail timer
expiry action is set to sendAlert, and this timer expiresro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1916.1.18.6.1.3 |
extremeEapsSharedPortSegmentVlanPortCountThe count of vlan ports being protected under this
segment's EAPS domain.ro INTEGER .1.3.6.1.4.1.1916.1.18.6.1.4 |
extremeEapsSharedPortSegmentAdjIdThe link Id of a neighboring node if the neighbor's
shared port instance was in blocking state.ro INTEGER .1.3.6.1.4.1.1916.1.18.6.1.5 |
extremeEapsSharedPortSegmentRBDThe Root Blocker Id as determined by the neighboring
node's shared port instance.ro INTEGER .1.3.6.1.4.1.1916.1.18.6.1.6 |
extremeEapsSharedPortVlanTableThis table contains all VLANs protected by the EAPS
Shared Port instance. SEQUENCE OF ExtremeEapsSharedPortVlanEntry .1.3.6.1.4.1.1916.1.18.7 |
extremeEapsSharedPortVlanEntryAn individual entry of this table correlates a EAPS
Shared port instance with a VLAN protected by it. ExtremeEapsSharedPortVlanEntry .1.3.6.1.4.1.1916.1.18.7.1 |
extremeEapsSharedPortVlanNameThe vlan being protected under this EAPS Shared port
instancero DisplayString .1.3.6.1.4.1.1916.1.18.7.1.1 |
extremeEapsSharedPortVlanPortCountThe count of vlan ports being protected under this
vlanro INTEGER .1.3.6.1.4.1.1916.1.18.7.1.2 |
extremeEapsSharedPortVlanActiveOpenPortSegment port that is Active Open.
If there is no Active open port, then this value is 0.ro EapsRingPort .1.3.6.1.4.1.1916.1.18.7.1.3 |
extremeEapsSharedPortVlanPortTableThis table contains the EAPS shared port's vlan-port's
information SEQUENCE OF ExtremeEapsSharedPortVlanPortEntry .1.3.6.1.4.1.1916.1.18.8 |
extremeEapsSharedPortVlanPortEntryAn individual entry of this table describes the EAPS
shared port's vlan port information. It will describe the
status of the vlan port under its protection. ExtremeEapsSharedPortVlanPortEntry .1.3.6.1.4.1.1916.1.18.8.1 |
extremeEapsSharedPortVlanPortStatusThe status of a vlan port which is getting protected
by an EAPS shared port.ro EapsSharedPortVlanPortStatus .1.3.6.1.4.1.1916.1.18.8.1.1 |