EXTREME-CABLE-MIB
AI MIB Summary
The EXTREME-CABLE-MIB module enables monitoring of physical layer cable attributes, including status, type, and link integrity, on Extreme Networks switching and routing hardware. It provides specific counters and gauges for diagnosing copper and fiber connectivity issues within the device's internal cabling infrastructure.
Extreme-specific Cable objects
Main OID:
extremeCable.1.3.6.1.4.1.1916.1.24
50
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
extremeCableExtreme-specific Cable objects MODULE-IDENTITY .1.3.6.1.4.1.1916.1.24 |
SNMPv2-SMIExtreme-specific Cable objects Unknown .1.3.6.1.4.1.1916.1.24 |
RFC1213-MIBExtreme-specific Cable objects NOTIFICATION-TYPE .1.3.6.1.4.1.1916.1.24 |
extremeDiagConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1916.1.24.1 |
extremeDiagConfigTimeIndicates the time at which the Diagnostics information
will be collected for the ports which have
Auto-Diagnostics configured. Time must be given in hh:mm:ss format
where hh, mm and ss are in decimalsrw DisplayString .1.3.6.1.4.1.1916.1.24.1.1 |
extremeDiagConfigRoFIndicates whether a port should return to INIT state on
Diagnostics Failure. If TRUE the port will be restarted
even if the Diagnostics indicate a Failure. If FALSE the
port will be moved to DIAG_FAIL staterw Enumeration .1.3.6.1.4.1.1916.1.24.1.2 |
extremeDiagPortConfigTableTable, which contains the diagnostic configuration
information for the ports SEQUENCE OF ExtremeDiagPortCfgEntry .1.3.6.1.4.1.1916.1.24.2 |
extremeDiagPortConfigEntryEach row represents port related diagnostics
configuration ExtremeDiagPortCfgEntry .1.3.6.1.4.1.1916.1.24.2.1 |
extremeDiagPortCfgPortIfIndexIfIndex of the Port for which the information in this row appliesro INTEGER .1.3.6.1.4.1.1916.1.24.2.1.1 |
extremeDiagPortCfgModeThe mode of operation. The port can be configured to have
either manual diagnostics or auto-diagnostics collected.ro Enumeration .1.3.6.1.4.1.1916.1.24.2.1.2 |
extremeDiagPortCfgStatusSpecifies whether Diagnostics are enabled or disabled for
the port. In the manual mode, enable and disable will disable the
corresponding bit in the manual Diag portmask. Once the run command is
given the Manual Diagnostics starts running. <diagfail> indicates the
diagnostics for the port has failed. <diagfail> is a read-only value and
cannot be used for setting the status of the portrw Enumeration .1.3.6.1.4.1.1916.1.24.2.1.3 |
extremeDiagPortDiagTableTable contains the diagnostic information for the ports SEQUENCE OF ExtremeDiagPortDiagEntry .1.3.6.1.4.1.1916.1.24.3 |
extremeDiagPortDiagEntryEach row represents port related diagnostics information ExtremeDiagPortDiagEntry .1.3.6.1.4.1.1916.1.24.3.1 |
extremeDiagPortDiagPortIfIndexIfIndex of the Port for which the information in this row appliesro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.1 |
extremeDiagPortDiagModeThe mode of operation. The port can be configured to have
either manual diagnostics or auto-diagnostics collected.ro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.2 |
extremeDiagPortSpeedSpecifies the speed of the portro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.3 |
extremeDiagPortSwapABSpecifies whether pairA pairB cables are swappedro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.4 |
extremeDiagPortSwapCDSpecifies whether pairC and pairD cables are swappedro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.5 |
extremeDiagPortPairAPolSpecifies the polarity of pairA cablesro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.6 |
extremeDiagPortPairAFlenSpecifies the distance of Fault in the pairA cablesro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.7 |
extremeDiagPortPairALenSpecifies the length of the pairA cablesro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.8 |
extremeDiagPortPairASkewSkew of pairA cables with respect to the fastest pairro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.9 |
extremeDiagPortPairAStatusIndicates whether pairA cables are properly terminated,
short or openro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.10 |
extremeDiagPortPairBPolSpecifies the polarity of pairB cablesro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.11 |
extremeDiagPortPairBFlenSpecifies the distance of Fault in the pairB cablesro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.12 |
extremeDiagPortPairBLenSpecifies the length of the pairB cablesro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.13 |
extremeDiagPortPairBSkewSkew of pairB cables with respect to the fastest pairro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.14 |
extremeDiagPortPairBStatusIndicates whether pairB cables are properly terminated,
short or openro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.15 |
extremeDiagPortPairCPolSpecifies the polarity of pairC cablesro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.16 |
extremeDiagPortPairCFlenSpecifies the distance of Fault in the pairC cablesro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.17 |
extremeDiagPortPairCLenSpecifies the length of the pairC cablesro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.18 |
extremeDiagPortPairCSkewSkew of pairC cables with respect to the fastest pairro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.19 |
extremeDiagPortPairCStatusIndicates whether pairC cables are properly terminated,
short or openro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.20 |
extremeDiagPortPairDPolSpecifies the polarity of pairD cablesro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.21 |
extremeDiagPortPairDFlenSpecifies the distance of Fault in the pairD cablesro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.22 |
extremeDiagPortPairDLenSpecifies the length of the pairD cablesro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.23 |
extremeDiagPortPairDSkewSkew of pairD cables with respect to the fastest pairro INTEGER .1.3.6.1.4.1.1916.1.24.3.1.24 |
extremeDiagPortPairDStatusIndicates whether pairD cables are properly terminated,
short or openro Enumeration .1.3.6.1.4.1.1916.1.24.3.1.25 |
extremeDiagPortDateTimeDate and time at which the Diagnostic information was
collectedro DisplayString .1.3.6.1.4.1.1916.1.24.3.1.26 |
extremeDiagPortStatsTableTable, which contains the diagnostic statistic information
for the ports SEQUENCE OF ExtremeDiagPortStatsEntry .1.3.6.1.4.1.1916.1.24.4 |
extremeDiagPortStatsEntryEach row represents port related diagnostics statistics
information ExtremeDiagPortStatsEntry .1.3.6.1.4.1.1916.1.24.4.1 |
extremeDiagPortStatsPortIfIndexIfIndex of the Port for which the information in this row appliesro INTEGER .1.3.6.1.4.1.1916.1.24.4.1.1 |
extremeDiagPortStatsNumDiagNumber of times Diagnostics information collected for this
portro INTEGER .1.3.6.1.4.1.1916.1.24.4.1.2 |
extremeDiagPortStatsNumSuccessNumber of times Diagnostics for this port completed
successfully without any errorsro INTEGER .1.3.6.1.4.1.1916.1.24.4.1.3 |
extremeDiagPortStatsNumFailNumber of times Diagnostics for this port Failed due to
errors in the cable pairsro INTEGER .1.3.6.1.4.1.1916.1.24.4.1.4 |
extremeDiagPortStatsNumChangeNumber of times Diagnostics Changed for this portro INTEGER .1.3.6.1.4.1.1916.1.24.4.1.5 |
extremeDiagPortStatsNumAbortNumber of times Diagnostics was aborted by the user for this portro INTEGER .1.3.6.1.4.1.1916.1.24.4.1.6 |
extremeCableTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1916.4.13 |
extremeCableTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1916.4.13.0 |
extremeTrapDiagPortDiagnosticsIndicates the status of Diagnostics for a port. The status indicates
whether Diagnostics for a particular port failed NOTIFICATION-TYPE .1.3.6.1.4.1.1916.4.13.0.1 |