Home/Catalog/EXPERTV2-MIB

EXPERTV2-MIB

AI MIB Summary

Standard SNMP MIB module defining data structures for EXPERTV2-MIB.

286
Objects
Active
Status
3
Dependencies

Imported Objects

RFC1155-SMI
RFC-1215
SNMPv2-TC

Objects

286 total
Object Name
huawei
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011
products
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2
access_server
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3
expert_v2
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4
device
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1
devBaseInfoGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1.1
deviceSystemInfomation
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1.1.1
sysDateAndTimeThe date and time of this device can be set.DateAndTime is in octet mode which does not include time-zone information.rw
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.2.3.4.1.1.1.1
sysIPAddrThe device lacks of IP addressro
IpAddress
.1.3.6.1.4.1.2011.2.3.4.1.1.1.2
sysVersionExpert V2 device versionro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.1.3
slotBoardTableThe board information table describes the information of the type, the status and the software version etc. of the boards in various slot of the EXPERT.
SEQUENCE OF SlotBoardEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.2
slotBoardEntryThe object defined by this line describes the information of the board in the slot.
SlotBoardEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1
slotBoardSlotNoSlot number, it forms the index for this table. The EXPERT includes 16 slots. The value range of which is from 0 to 15.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.1
slotBoardTypeThe type of slot board, it describes the type of board to be inserted in the slot among which null (100) indicates null slot. When the variable value is null (100), the variable values of subsequent rows of this row has no meaning, all of which are 0 or null.ro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.2
slotBoardNoBoard number, ranging from 0 to 11. When the slot is null, the returned value is 65535 indicating invalidation.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.3
slotBoardStatusBoard status not-install(0) Not-installed normal(1) Normal fault(2) Fault active-normal(3) The active one is normal active-error(4) The active one is faulty back-normal(5) The backup one is normal back-error(6) The backup one is faulty When the board type is null (100), the board status returns not-install (0) to indicate invalidation.ro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.4
slotBoardTimesystem timero
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.5
slotBoardPCBVersionDescription of Board PCB version. When the board type is null (100), the returned value is \0 indicating invalidation.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.6
slotBoardBIOSVersionDescription of Board BIOS version, when the board type is null (100), the returned value is \0 indicating invalidation.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.7
slotBoardSoftwareVersionBoard system version number. When the board type is null (100), the returned value is \0 indicating invalidation.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.8
slotBoardLogicVersionDescription of Board logic version. When the board type is null (100), the returned value is \0 indicating invalidation.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.9
slotBoardDSPVersionDescription of Board DSP version. When the board type is null (100), the returned value is \0 indicating invalidation.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.10
slotBoardOtherVersionDescription of other versions. When the board type is null (100), the returned value is \0 indicating invalidation.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.11
slotBoardCPURatioBoard CPU seizure ratio. When the board type is null (100), the returned value is \0 indicating invalidation.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.12
slotBoardCPUStatusBoard CPU status normal(1) indicating CPU is normal overload1(2) indicating CPU is in the status of level 1 overload overload2(3) indicating CPU is in the status of level 2 overload overload3(4) indicating CPU is in the status of level 3 overload overload4(5) indicating CPU is in the status of level 4 overload When the board type is null (100), the returned value is no-meaning (0) indicating invalidation.ro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.13
slotBoardMemorySizeBoard memory size, including used part and unused part. When the board type is null (100), the returned value is \0 indicating invalidation.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.14
slotBoardUsableMemoryBoard usable memory size. It means the unused memory of the board. When the board type is null (100), the returned value is \0 indicating invalidation.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.2.1.15
boardResetInfoTableBoard reset information table. It describes the causes and time of the previous reset of the EXPERT board.
SEQUENCE OF BoardResetInfoEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.3
boardResetInfoEntryThe object defined by this line describes the causes and time of the previous reset of the board.
BoardResetInfoEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.3.1
boardResetInfoSlotNoSlot number. This object forms the index for this table. EXPERT includes 16 slots with the value range from 0 to 15.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.3.1.1
boardResetInfoReasonBoard reset causes. The meaning of various enumeration values are as follows: slot-err(0), he input slot number is wrong. slot-nouse(1), The slot has not been configured with board. no-reset-record(2), This board has no reset record. lost-connect(3), The active SMB lost connection with this board. user-cmd(4), User delivers reset command. smb-snd-msg(5), SMD delivers reset message. abnormal(6), Reset is caused by abnormal error board-fault(7), It is unable to query due to board fault failed(8), Query failure /*SMB reset cause 20 ~ 49 */ swap-smb(20), Switching SMB board mt-reboot(21), User delivers the command of reset board all. /* VSP reset cause 50 ~ 79 */ /* HRB reset cause 80 ~ 109 */ /* MSTU reset cause 80 ~ 109 */ cfg-failed(110), Configuration failure failed-531(111), 531 failure failed-528(112), 528 failure failed-525(113) 525 failurero
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.3.1.2
boardResetInfoTimeThe time of previous board reset. If the board has not reset before, the returned date and time are not defined.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.2.3.4.1.1.3.1.3
e1InfoTableE1 information table. It describes the information of various E1 port on the VSP board and MSTU board.
SEQUENCE OF E1InfoEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.5
e1InfoEntryThe object defined by this line describes the information of the E1 port.
E1InfoEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.5.1
e1InfoSlotNoSlot number. This object and e1InfoE1NoInBoard form the index for this table which is used as the only one flag indicating a E1 in certain board. The value range of slot number is from 0 to 15.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.5.1.1
e1InfoE1NoInBoardThe E1 number inside the board. This object and e1InfoSlotNo form the index for this table with the value range from 0 to 62. Actually, the VSP board contains four E1 ports but additional space for 12 ports is reserved. Thus for the VSP board, the value range of this object is from 0 to 15. The MSTU board contains 63 E1 ports. Thus for the MSTU board, the value range of this object is from 0 to 62.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.5.1.2
e1InfoE1NoThe global E1 number in the EXPERT. When the device include 2 MSTU boards and 10 VSP boards, the number of E1s is the most which is up to 286; thus the value range of this object is from 0 to 285.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.5.1.3
e1InfoE1TypeE1 type, the meaning of various enumeration valuesis as follows: no1(0) China No. 1 or R2 tup(1) SS7 TUP isup(2) SS7 ISUP pra(3) ISDN DSS1ro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.5.1.4
e1InfoE1StatusThe status of E1 port, the meaning of various enumeration values is as follows: uninstall(0) Not-installed fault(1) Fault normal(2) Normal alarm(3) Alarmro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.5.1.5
e1InfoE1LoopBackStatusThe loop status of E1 port, the meaning of various enumeration valuesis as follows: remote-loop(2), in the status of remote loop local-loop(4), in the status of local loop rmt-lcl-loop(6), in remote and local loop status simultaneously payload-loop(8), in the status of payload loop rmt-payload-loop(10), in remote and payload loop status simultaneously lcl-payload-loop(12), in local and payload loop status simultaneously rmt-lcl-payload-loop(14), in local, remote and payload loop status simultaneously no-loop(16) not in loop status There are three types of loop: local loop, remote loop and payload loop which are not exclusive to one another, and can exist simultaneously.ro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.5.1.6
e1InfoE1PCMParaPCM alarm parameter. This value is an 8-digit integer and each digit indicates one type of alarm as below: D7 D6 D5 D4 D3 D2 D1 D0 | | | | | | | |__ meaningless, fixed to 1 | | | | | | | | | | | | | |__Remote multiframe alarm, RMF | | | | | | | | | | | |__ TS16 all 1 | | | | | | | | | |__Slide code | | | | | | | |__Disconnection | | | | | |__Remote frame alarm, RFA | | | |___ Multiframe out-of-sync, MFA | |___Frame out-of-sync, FAS Note: Dx = 0 Alarm 1 = normalro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.5.1.7
mfcInfoTableMFC information table. It describes the status information of the MFC chip on the VSP boards.
SEQUENCE OF MfcInfoEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.6
mfcInfoEntryThe object defined by this line describes the status information of the MFC chip.
MfcInfoEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.6.1
mfcInfoMfcNoGlobal MFC number. This variable value equals to the logic board number of the MFC-located VSP board with the range from 0 to 11.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.6.1.1
mfcInfoMfcStatusThe status of the MFC chip, the meaning of various enumeration values is as follows: normal(0), The MFC is in normal status. error(1), MFC fault num-err(2), The input MFC number is wrong. num-nouse(3) The MFC with this number is not configured.ro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.6.1.2
userStatisticsGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1.1.15
userStatisticsDevTableThe user statistics device table. It describes the number of various types of users within the device.
SEQUENCE OF UserStatisticsDevEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1
userStatisticsDevEntryThis line contains the object describing the user statistics information.
UserStatisticsDevEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1
userStatisticsDevIndexTable index. It is meaningless and is fixed to 1. It is just for facilitating Agent to deliver multiple variable request.
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.1
userStatisticsDevISDNThe number of ISDN ports (without identifying 1B or 2B, due to repetition with MP)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.2
userStatisticsDevMODEMThe number MODEM portsro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.3
userStatisticsDevNormalThe number of Normal users (General ppp users)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.4
userStatisticsDevVPNThe number of VPN usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.5
userStatisticsDevMPThe number of MP users (including Modem bundling, ISDN2B and ISDN+Modem)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.6
userStatisticsDevRLoginThe number of RLoging users (including Rlogin, TCP and TCP clear)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.7
userStatisticsDevCallbackThe number of Callback users (not supported by R100)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.8
userStatisticsDevV110The number of V.110 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.9
userStatisticsDevV120The number of V.120 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.10
userStatisticsBoardTableBoard user statistics table. It describes the statistics of various types of users through certain board.
SEQUENCE OF UserStatisticsBoardEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2
userStatisticsBoardEntryThis line contains the object describing the board user statistics information.
UserStatisticsBoardEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1
userStatisticsBoardSlotNoSlot number
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.1
userStatisticsBoardISDNThe number of ISDN ports (without identifying 1B or 2B due to repetition with MP)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.2
userStatisticsBoardMODEMThe number of MODEM portsro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.3
userStatisticsBoardNormalThe number of Normal users(general ppp users)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.4
userStatisticsBoardVPNThe number of VPN usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.5
userStatisticsBoardMPThe number of MP users (including Modem bundling, ISDN2B and ISDN+Modem)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.6
userStatisticsBoardRLoginThe number of Rlogin users (including Rlogin, TCP and TCP clear)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.7
userStatisticsBoardCallbackThe number of Callback users (not supported by R100)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.8
userStatisticsBoardV110The number of V.110 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.9
userStatisticsBoardV120The number of V.120 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.10
userStatisticsE1TableE1-port user statistics table. It describes the statistics information of varied types of users through a certain E1 port.
SEQUENCE OF UserStatisticsE1Entry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3
userStatisticsE1EntryThis line contains the object describing E1-port user statistics information.
UserStatisticsE1Entry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1
userStatisticsE1SlotNoSlot number
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.1
userStatisticsE1PortNoE1 port number in board
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.2
userStatisticsE1ISDNthe number of ISDN ports(without identifying 1B or 2B due to repetition with MP)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.3
userStatisticsE1MODEMThe number of MODEM portsro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.4
userStatisticsE1NormalThe number of Normal users(general ppp users)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.5
userStatisticsE1VPNThe number of VPN usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.6
userStatisticsE1MPThe number of MP users (including Modem bundling, ISDN2B and ISDN+Modem)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.7
userStatisticsE1RLoginThe number of Rlogin users (including Rlogin, TCP and TCP clear)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.8
userStatisticsE1CallbackThe number of Callback users (not supported by R100)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.9
userStatisticsE1V110The number of V.110 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.10
userStatisticsE1V120The number of V1.20 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.11
userStatisticsAccCodeTableThe table of user statistics according to access code. It describes the statistics of various types of users with the same access code.
SEQUENCE OF UserStatisticsAccCodeEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4
userStatisticsAccCodeEntryThis line contains the object describing the user statistics according to access code.
UserStatisticsAccCodeEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1
userStatisticsAccCodeIndexAccess code
OCTET STRING
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.1
userStatisticsAccCodeISDNThe number of ISDN ports (without identifying 1B or 2B due to repetition with MP)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.2
userStatisticsAccCodeMODEMThe number of MODEM portsro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.3
userStatisticsAccCodeNormalThe number of Normal users (general ppp users)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.4
userStatisticsAccCodeVPNThe number of VPN usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.5
userStatisticsAccCodeMPThe number of MP users (including Modem bundling, ISDN and ISDN+Modem)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.6
userStatisticsAccCodeRLoginThe number of RLoging users (including Rlogin, TCP and TCP clear)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.7
userStatisticsAccCodeCallbackThe number of Callback users (not supported by R100)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.8
userStatisticsAccCodeV110The number of V.110 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.9
userStatisticsAccCodeV120The number of V1.20 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.10
userStatisticsAccCode2TableBoth this and the previous tables of user statistics are according to access code and the only difference is that the index of this table is group number and intra-group ID in stead of access code. Thus, it is available to go through all configured access code and perform the statistics of port seizure and the statistics of variious types of users according to each access code.
SEQUENCE OF UserStatisticsAccCode2Entry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5
userStatisticsAccCode2EntryThis line contains the object describing the user statistics according to access code.
UserStatisticsAccCode2Entry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1
userStatisticsAccCode2GrpNoGroup number
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.1
userStatisticsAccCode2IndexIntra-group ID
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.2
userStatisticsAccCode2ValueAccess codero
OCTET STRING
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.3
userStatisticsAccCode2ISDNThe number of ISDN ports (without identifying 1B or 2B due to repetition with MP)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.4
userStatisticsAccCode2MODEMThe number of MODEM portsro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.5
userStatisticsAccCode2NormalThe number of Normal users (general ppp users)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.6
userStatisticsAccCode2VPNThe number of VPN usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.7
userStatisticsAccCode2MPThe number of MP users (including Modem binding, ISDN2B and ISDN+Modem)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.8
userStatisticsAccCode2RLoginThe number of RLoging users (including Rlogin, TCP and TCP clear)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.9
userStatisticsAccCode2CallbackThe number of Call back users ( not supported by R001)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.10
userStatisticsAccCode2V110The number of V.110 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.11
userStatisticsAccCode2V120The number of V1.20 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.12
userStatisticsAccDomainTableThe table of user statistics based on access field. It describes the statistics of various types of users with the same access domain.
SEQUENCE OF UserStatisticsAccDomainEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6
userStatisticsAccDomainEntryThis line contains the object describing the user statistics accroding to access domain.
UserStatisticsAccDomainEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1
userStatisticsAccDomainIndexDomain
OCTET STRING
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.1
userStatisticsAccDomainISDNThe number of ISDN ports (without identifying 1B or 2B due to repetition with MP)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.2
userStatisticsAccDomainMODEMThe number of MODEM portsro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.3
userStatisticsAccDomainNormalThe number of Normal users (general ppp users)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.4
userStatisticsAccDomainVPNThe number of VPN usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.5
userStatisticsAccDomainMPThe number of MP users (including Modem binding, ISDN2B and ISDN+Modem)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.6
userStatisticsAccDomainRLoginThe number of RLoging users (including Rlogin, TCP and TCP clear)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.7
userStatisticsAccDomainCallbackThe number of Call back users (not supported by R001)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.8
userStatisticsAccDomainV110The number of V.110 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.9
userStatisticsAccDomainV120The number of V1.20 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.10
userStatisticsAccDomain2TableThe user statistics in both this and the previous tables are performed according to access domain. The only difference is that the index of this table is group number and intra-group ID in stead of access code. Thus, it is able to go through all configured access domain and perform the statistics of port seizure and the statistics of varied types of users according to each access domain.
SEQUENCE OF UserStatisticsAccDomain2Entry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7
userStatisticsAccDomain2EntryThis line contains the object describing the user statistics according access domain.
UserStatisticsAccDomain2Entry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1
userStatisticsAccDomain2GrpNoGroup number
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.1
userStatisticsAccDomain2IndexIntra-group ID
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.2
userStatisticsAccDomain2ValueDomainro
OCTET STRING
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.3
userStatisticsAccDomain2ISDNThe number of ISDN ports (without identifying 1B or 2B due to repetition with MP)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.4
userStatisticsAccDomain2MODEMThe number of MODEM portsro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.5
userStatisticsAccDomain2NormalThe number of Normal users (general ppp users)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.6
userStatisticsAccDomain2VPNThe number of VPN usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.7
userStatisticsAccDomain2MPThe number of MP users (including Modem binding, ISDN2B and ISDN+Modem)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.8
userStatisticsAccDomain2RLoginThe number of RLoging users (including Rlogin, TCP and TCP clear)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.9
userStatisticsAccDomain2CallbackThe number of Callback users (not supported by R001)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.10
userStatisticsAccDomain2V110The number of V.110 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.11
userStatisticsAccDomain2V120The number of V1.20 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.12
userStatisticsOdnTableThe table of user statistics based on office direction. It describes the statistics of varied types of users with the same office direction.
SEQUENCE OF UserStatisticsOdnEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8
userStatisticsOdnEntryThis line contains the object describing the user statistics according to office direction.
UserStatisticsOdnEntry
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1
userStatisticsOdnIndexOffice direction number
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.1
userStatisticsOdnISDNThe number of ISDN ports (without identifying 1B or 2B due to repetition with MP)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.2
userStatisticsOdnMODEMThe number of MODEM portsro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.3
userStatisticsOdnNormalThe number of Normal users (general ppp users)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.4
userStatisticsOdnVPNThe number of VPN usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.5
userStatisticsOdnMPThe number of MP users (including Modem binding, ISDN2B and ISDN+Modem)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.6
userStatisticsOdnRLoginThe number of RLoging users (including Rlogin, TCP and TCP clear)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.7
userStatisticsOdnCallbackThe number of Callback users (not supported by R001)ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.8
userStatisticsOdnV110The number of V.110 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.9
userStatisticsOdnV120The number of V1.20 usersro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.10
devMaintainGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1.2
seekUserTablenas board user query table
SEQUENCE OF SeekUserEntry
.1.3.6.1.4.1.2011.2.3.4.1.2.27
seekUserEntryThis table contains operation objects for nas board user query.
SeekUserEntry
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1
seekUserTypeUser query operation types: ByIP(0): Query on the basis of IP addresses. ByUserName(1): Query on the basis of user names. ByCallingNumber(2): Query on the basis of calling numbers.
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.1
seekUserIPUser IP address (network byte sequence)rw
IpAddress
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.2
seekUserNameUser namerw
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.3
seekUserCallingNumberCalling numberrw
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.4
seekUserRstQuery results: success(0):The query succeeds. fail(1): The query fails. end(2): The query ends.
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.5
seekUserBoardVSP board number
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.6
seekUserPortUser port number 0-119 (MODEM), 0-123(ISDN)
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.7
seekUserGroupNoGroup number
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.8
seekUserServiceTypePrimitive port type
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.9
seekUserAccessTypeUser access type
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.10
seekUserSessionTimeSession duration (second)
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.11
seekUserRxRateReceiving speed rate
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.12
seekUserTxRateSending speed rate
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.13
seekUserCalledNumberCalled number
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.2.27.1.14
kickUserTablenas-board forced user disconnection table
SEQUENCE OF KickUserEntry
.1.3.6.1.4.1.2011.2.3.4.1.2.28
kickUserEntryThis table contains operation objects for nas-board forced user disconnection.
KickUserEntry
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1
kickUserTypeUser disconnection operation types: byip(0): Disconnection users are determined on the basis of IP addresses. byusername(1): Disconnection users are determined on the basis of user names. bycallingnumber(2): Disconnection users are determined on the basis of calling numbers.
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.1
kickUserIPUser IP address (network byte sequence)rw
IpAddress
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.2
kickUserNameUser namerw
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.3
kickUserCallingNumberCalling numberrw
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.4
kickUserRstOperation results: success(0): The query succeeds. fail(1): The query fails. end(2): The query ends.
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.5
kickUserBoardVSP board number
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.6
kickUserPortUser port number 0-119(MODEM), 0-123(ISDN)
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.7
kickUserGroupNoGroup number
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.8
kickUserServiceTypePrimitive port type
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.9
kickUserAccessTypeUser access type
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.10
kickUserSessionTimeSession duration (second)
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.11
kickUserRxRateReceiving rate
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.12
kickUserTxRateSending speed rate
INTEGER
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.13
kickUserCalledNumberCalled number
DisplayString
.1.3.6.1.4.1.2011.2.3.4.1.2.28.1.14
devConfigGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1.3
devTrapGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1.4
devAlarmMibGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1.4.1
alarmLevelAlarm level: emergencyAlarm(1): emergency Alarm importantAlarm(2): important Alarm generalAlarm(3): eneral Alarm promptAlarm(4): prompt Alarm Please refer Regulations of C&C08 Switch Network Management Alarm Report for the specific definitions.
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.4.1.1
alarmNMCategoryClassification of network management alarm: powerSupply: Power Supply Alarm environment: Environment Alarm signaling: Signaling Alarm trunk: Trunk Alarm hardware: Hardware Alarm software: Software Alarm operation: Operation Alarm communicationFault: Communication Fault Alarm serviceQuality: Service Quality Alarm handlingError: HandlingError Alarm Please refer to Regulations of C&C08 Switch Network Management Alarm Report for the specific definitions.
Enumeration
.1.3.6.1.4.1.2011.2.3.4.1.4.1.2
alarmContentsThe content of MML alarm is a string of a certain format. Please refer to Regulations of C&C08 Switch Network Management Alarm Report for the specific formats.
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.2011.2.3.4.1.4.1.3
devMainTainTrapGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1.4.2
seekUserTrapThe result of querying user of NAS board
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.2.3.4.1.4.2.0.27
kickUserTrapThe result of NAS board kicking user offline
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.2.3.4.1.4.2.0.28
devAlarmTrapGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.1.4.3
alarmMMLThe MMl alarm is transmitted in Trap mode. Alarm level indicates the alarm level and Alarm NM Category indicates the alarm category. Alarm contents indicate the string contents of MML alarm and the string is accordant with the Regulations of cc08 Network Management Alarm Report.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.2.3.4.1.4.3.0.1
alarmSlotBoardChangeBoard position changes TRAP. When the status of an equipment board or board type changes, it will be sent out by the equipment.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.2.3.4.1.4.3.0.2
alarmBoardLedBoard alarm indicator changes TRAP. When the status of an equipment board alarm indicator changes, it will be sent out by the equipment.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.2.3.4.1.4.3.0.10001
smb_board
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.2
smbBaseInfoGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.2.1
vsp_board
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.3
vspBaseInfoGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.3.1
vspPortStatusTablePort status table of VSP board and HSP board. It indicates the statuses of DSP ports and ISDN ports of VSP board or HSP board.
SEQUENCE OF VspPortStatusEntry
.1.3.6.1.4.1.2011.2.3.4.3.1.1
vspPortStatusEntryIt contains objects describing statuses of DSP ports and ISDN ports of VSP board or HSP board.
VspPortStatusEntry
.1.3.6.1.4.1.2011.2.3.4.3.1.1.1
vspPortStatusSlotNoSlot number of VSP board or HSP board, forming the index of this table. The value range is 0-15.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.1.1.1
vspPortStatusISDNPortStatusISDN port statuses. There are 62 bytes totally. Every byte indicates the statuses of two ports. That is, every 4 bits indicate status of one port. This object can totally indicate statuses of 124 ISDN ports. The following is the corresponding relations between port statuses and 4-bit values indicating corresponding port status. 0 NOINSTALL Uninstalled 1 IDLE Idle 2 BUSY Busy 3 FAULT Fault 4 TESTING Test 5 BLOCK Blocked 6 OTHER Other 15 NO-MEANING No meaning If VSP contains less than 124 ports, those exceeding the number of ISDN ports of this board are indicated with 15 NO-MEANING. For HSP board, this object has its meaning. For VSP board, only DSP ports are provided and NOINSTALL is used for all ports of this object.ro
OCTET STRING
.1.3.6.1.4.1.2011.2.3.4.3.1.1.1.2
vspPortStatusDSPPortStatusDSP port statuses. There are 60 bytes totally. Every byte indicates statuses of two ports. That is, every 4 bits indicate status of one port. This object can totally indicate statuses of 120 DSP ports. The following is the corresponding relations between port statuses and 4-bit values indicating corresponding port status. 0 NOINSTALL Uninstalled 1 IDLE Idle 2 BUSY Busy 3 FAULT Fault 4 TESTING Test 5 BLOCK Blocked 6 OTHER Other 15 NO-MEANING No meaning If VSP contains less than 120 ports, those exceeding the number of DSP ports of this board are indicated with 15 NO-MEANING. For VSP board, this object has its meaning. For HSP board, only ISDN ports are provided and NOINSTALL is used for all ports of this object.ro
OCTET STRING
.1.3.6.1.4.1.2011.2.3.4.3.1.1.1.3
vspPortStatisticsTablePort statistics table of VSP board and HSP board. It contains the numbers of DSP ports and IDSN ports in various statuses of VSP board or HSP board.
SEQUENCE OF VspPortStatisticsEntry
.1.3.6.1.4.1.2011.2.3.4.3.1.3
vspPortStatisticsEntryIt contains objects describing numbers of DSP ports and IDSN ports in various statuses of VSP board or HSP board.
VspPortStatisticsEntry
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1
vspPortStatisticsSlotNoSlot number of VSP board or HSP board. It forms the index of this table.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.1
vspPortStatisticsISDNTotalPortsNumber of total ISDN ports of this HSP board. For VSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.2
vspPortStatisticsISDNNoInstallPortsNumber of uninstalled ISDN ports of this HSP board. For VSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.3
vspPortStatisticsISDNIdelPortsNumber of idle ISDN ports of this HSP board. For VSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.4
vspPortStatisticsISDNBusyPortsNumber of busy ISDN ports of this HSP board. For VSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.5
vspPortStatisticsISDNFaultPortsNumber of fault ISDN ports of this HSP board. For VSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.6
vspPortStatisticsISDNTestPortsNumber of test ISDN ports of this HSP board. For VSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.7
vspPortStatisticsISDNBlockPortsNumber of blocked ISDN ports of this HSP board. For VSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.8
vspPortStatisticsISDNOtherPortsNumber of ISDN ports in other statuses of this HSP board. For VSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.9
vspPortStatisticsDSPTotalPortsNumber of total DSP ports of this VSP board. For HSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.10
vspPortStatisticsDSPNoInstallPortsNumber of uninstalled DSP ports of this VSP board. For HSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.11
vspPortStatisticsDSPIdelPortsNumber of idle DSP ports of this VSP board. For HSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.12
vspPortStatisticsDSPBusyPortsNumber of busy DSP ports of this VSP board. For HSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.13
vspPortStatisticsDSPFaultPortsNumber of fault DSP ports of this VSP board. For HSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.14
vspPortStatisticsDSPTestPortsNumber of test DSP ports of this VSP board. For HSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.15
vspPortStatisticsDSPBlockPortsNumber of blocked DSP ports of this VSP board. For HSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.16
vspPortStatisticsDSPOtherPortsNumber of DSP ports in other statuses of this VSP board. For HSP board, this object is 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.1.3.1.17
vspServiceInfoGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.3.2
vspNASCallTableAccess service call status table of VSP board and HSP board. It describes the information of various statuses of calls through ports of VSP board and HSP board.
SEQUENCE OF VspNASCallEntry
.1.3.6.1.4.1.2011.2.3.4.3.2.1
vspNASCallEntryIt contains objects describing call status information of VSP board and HSP board.
VspNASCallEntry
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1
vspNASCallSlotNoSlot number of VSP board or HSP board. It forms the index of this table.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.1
vspNASCallPortNoPort number of VSP board or HSP board. For VSP board, it is DSP port number and the range is 0-199. For HSP board, it is ISDN port and the range is 0-123.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.2
vspNASCallPortTypePort type. It indicates the port is an MODEM port or an ISDN port. MODEM port is DSP port that we usually say.ro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.3
vspNASCallValidFlagCall validity flag. It indicates whether there is any call through this port currently. invalid(1) indicates that there is no call through the port currently and the data has no meaning. valid(2) indicates that there is a call through this port.ro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.4
vspNASCallStartingTimeStart time of this call. If vspNASCallValidFlag is invalid, this object returns 0000 year 0 moth 0 date 0 hour 0 minute 0 second.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.5
vspNASCallCallingNumberCalling number of this call. If vspNASCallValidFlag is invalid, this object will return NULL.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.6
vspNASCallCalledNumberCalled number of this call. If vspNASCallValidFlag is invalid, this object will return NULL.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.7
vspNASCallDataRateReceiving speed rate. The receive rate for ISDN calls or the baud rate for modem calls. A value of 0 is returned if entry is invalid.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.8
vspNASCallXmitRateSending speed rate. The transmit rate for ISDN calls or the baud rate for modem calls. A value of 0 is returned if entry is invalid.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.9
vspNASCallDirectionCall direction. A value of no-meaning(3) is returned if entry is invalidro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.3.2.1.1.10
vspNASSessionTableAccess service session information table of VSP board and HSP board. It describes the information of various statuses of connection users through ports of VSP board.
SEQUENCE OF VspNASSessionEntry
.1.3.6.1.4.1.2011.2.3.4.3.2.2
vspNASSessionEntryIt contains objects describing connection user information of VSP board and HSP board.
VspNASSessionEntry
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1
vspNASSessionSlotNoSlot number of VSP board or HSP board. It forms the index of this table
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.1
vspNASSessionPortNoPort number of VSP board or HSP board. For VSP board, it is a DSP port and the range is 0-119. For HSP board, it is an ISDN port and the range is 0-123.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.2
vspNASSessionValidFlagSession validity flag. invalid(1) indicates that there is no user connected through this port currently and the data has no meaning. valid(2) indicates that there is an user connected through this port currently. If this object is valid(2), setting this object to be invalid(1) via NM station will break user connection through this port.rw
Enumeration
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.3
vspNASSessionUserGroupUser group. This device supports virtual ISP and there is user group concept. The user group range is 1-300. If the validity flag is invalid(1), this object returns 0.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.4
vspNASSessionUserNameUser name. If the validity flag is invalid(1), this object will return NULL.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.5
vspNASSessionUserIPAddressUser IP address. If the validity flag is invalid(1), this object will return 0.0.0.0.ro
IpAddress
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.6
vspNASSessionUserSubNetMaskUser IP address subnet mask. If the validity flag is invalid(1), this object will return 0.0.0.0.ro
IpAddress
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.7
vspNASSessionServiceTypeUser service type. If the validity flag is invalid(1), this object will return none(1).ro
Enumeration
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.8
vspNASSessionUserCallingNumberCalling number. If the validity flag is invalid(1), this object will return NULL.ro
DisplayString
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.9
vspNASSessionUserOnlineTimeConnection duration. The unit is second. If the validity flag is invalid(1), this object will return NULL.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.2.1.10
vspNASCallStatisticsTableAccess service call statistics table of VSP board and HSP board. It contains the connection information statistics of various calls since board reset.
SEQUENCE OF VspNASCallStatisticsEntry
.1.3.6.1.4.1.2011.2.3.4.3.2.5
vspNASCallStatisticsEntryIt contains objects describing call connection statistics information of VSP board and HSP board.
VspNASCallStatisticsEntry
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1
vspNASCallStatisticsSlotNoSlot number of VSP board or HSP board. It forms the index of this table.
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.1
vspNASCallStatisticsCurrentAnalogIncomingNumber of current analog incoming calls. The number of current analog incoming calls on this VSP board is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.2
vspNASCallStatisticsCurrentAnalogOutgoingNumber of current analog outgoing calls. The number of current analog outgoing calls on this board is returnedro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.3
vspNASCallStatisticsCurrentDigitalIncomingNumber of current digital incoming calls. The number of current analog incoming calls on this VSP board is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.4
vspNASCallStatisticsCurrentDigitalOutgoingNumber of current digital outgoing calls. The number of current digital outgoing calls on this board is returnedro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.5
vspNASCallStatisticsCurrentV110IncomingNumber of current V110 incoming calls. The current number of V.110 incoming calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.6
vspNASCallStatisticsCurrentV110OutgoingNumber of current V110 outgoing calls. The current number of V.110 outgoing calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.7
vspNASCallStatisticsCurrentV120IncomingNumber of current V120 incoming calls. The current number of V.120 incoming calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.8
vspNASCallStatisticsCurrentV120OutgoingNumber of current V120 outgoing calls. The current number of V.120 outgoing calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.9
vspNASCallStatisticsCurrentAnalogLogonSucNumber of current analog connection successes. Connection success means that an user gets online normally.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.10
vspNASCallStatisticsCurrentDigitalLogonSucNumber of current digital connection successesro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.11
vspNASCallStatisticsCurrentV110LogonSucNumber of current V110 connection successesro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.12
vspNASCallStatisticsCurrentV120LogonSucNumber of current V120 connection successesro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.13
vspNASCallStatisticsTotalAnalogIncomingNumber of total analog incoming calls since the last board restart or the last variable clear. The total number of analog incoming calls since system bootup or last clear of the variable is returned. sro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.14
vspNASCallStatisticsTotalAnalogOutgoingNumber of total analog outgoing calls since the last board restart or the last variable clear. The total number of analog outgoing calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.15
vspNASCallStatisticsTotalDigitalIncomingNumber of total digital incoming calls since the last board restart or the last variable clear. The total number of digital incoming calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.16
vspNASCallStatisticsTotalDigitalOutgoingNumber of total digital outgoing calls since the last board restart or the last variable clear. The total number of digital outgoing calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.17
vspNASCallStatisticsTotalV110IncomingNumber of total V110 incoming calls since the last board restart or the last variable clear. The total number of V.110 incoming calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.18
vspNASCallStatisticsTotalV110OutgoingNumber of total V110 outgoing calls since the last board restart or the last variable clear. The total number of V.110 outgoing calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.19
vspNASCallStatisticsTotalV120IncomingNumber of total V120 incoming calls since the last board restart or the last variable clear. The total number of V.120 incoming calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.20
vspNASCallStatisticsTotalV120OutgoingNumber of total V120 outgoing calls since the last board restart or the last variable clear. The total number of V.120 outgoing calls since system bootup or last clear of the variable is returned.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.21
vspNASCallStatisticsTotalAnalogLogonSucNumber of total analog connection successes since the last board restart or the last variable clear.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.22
vspNASCallStatisticsTotalDigitalLogonSucNumber of total digital connection successes since the last board restart or the last variable clear.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.23
vspNASCallStatisticsTotalV110LogonSucNumber of total V110 connection successes since the last board restart or the last variable clear.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.24
vspNASCallStatisticsTotalV120LogonSucNumber of total V120 connection successes since the last board restart or the last variable clear.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.25
vspNASCallStatisticsTotalAnalogLogoutSucNumber of total normal analog disconnections since the last board restart or the last variable clear. Normal disconnection means that an user, after he succeeds in connection, makes an active hangup and then is disconnected instead of being disconnected due to other abnormal causes.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.26
vspNASCallStatisticsTotalDigitalLogoutSucNumber of total normal digital disconnections since the last board restart or the last variable clear.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.27
vspNASCallStatisticsTotalV110LogoutSucNumber of total normal V110 disconnections since the last board restart or the last variable clear.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.28
vspNASCallStatisticsTotalV120LogoutSucNumber of total normal V120 disconnections since the last board restart or the last variable clear.ro
INTEGER
.1.3.6.1.4.1.2011.2.3.4.3.2.5.1.29
hrb_board
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.4
hrbBaseInfoGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.4.1
mstu_board
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.5
mstuPerfomConfigGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.5.1
mstuPerfomInfoGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.5.2
mstuPerfomResetGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.5.3
mstuPerfomSpendingGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.5.4
mstuSDHLoopGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.5.5
mstuTributaryNumGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.2.3.4.5.6
EXPERTV2-MIB - SNMP MIB Reference | MIBs Explorer