ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB
AI MIB Summary
ERICSSON-ROUTER-OPTICAL-TRANSCEIVER-MIB enables SNMP-based monitoring of optical transceiver parameters, including optical power levels, temperature, bias current, and voltage, on Line Card ports within Ericsson SSR routers. This module facilitates the detection of hardware degradation and link failures by tracking real-time physical layer telemetry for installed SFP or XFP modules.
The MIB used to manage the Optical Transceivers in Line Card ports in SSR
Main OID:
eriRouterOpticalTransceiver.1.3.6.1.4.1.193.218.2.50
48
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
eriRouterOpticalTransceiverAlarmAn eriRouterOpticalTransceiverAlarm notification signifies that an alarm has been raised or cleared on a Optical Transceiver NOTIFICATION-TYPE .1.3.6.1.4.1.193.218.2.49.0.2 |
eriRouterOpticalTransceiverLaneAlarmAn eriRouterOpticalTransceiverLaneAlarm notification signifies that an alarm has been raised or cleared in a lane on a Optical Transceiver NOTIFICATION-TYPE .1.3.6.1.4.1.193.218.2.49.0.3 |
eriRouterOpticalTransceiverMonMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.193.218.2.49.2.3 |
eriRouterOpticalTransceiverMonMIBNotificationGroupA collection of notifications providing Optical Transceiver fault condition Unknown .1.3.6.1.4.1.193.218.2.49.2.3.2 |
eriRouterOpticalTransceiverMonMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.193.218.2.49.2.4 |
eriRouterOpticalTransceiverMonMIBComplianceThe compliance statement for the OpticalTransceiver MIB Unknown .1.3.6.1.4.1.193.218.2.49.2.4.1 |
eriRouterOpticalTransceiverThe MIB used to manage the Optical Transceivers in Line Card ports in SSR MODULE-IDENTITY .1.3.6.1.4.1.193.218.2.50 |
eriRouterOpticalTransceiverDetails OBJECT IDENTIFIER .1.3.6.1.4.1.193.218.2.50.1 |
eriRouterOpticalTransceiverPortTableThis table contains the ports with optical transceivers and corresponding parameters SEQUENCE OF EriRouterOpticalTransceiverPortEntry .1.3.6.1.4.1.193.218.2.50.1.1 |
eriRouterOpticalTransceiverPortEntryLine Card port optical transceiver parameter description. EriRouterOpticalTransceiverPortEntry .1.3.6.1.4.1.193.218.2.50.1.1.1 |
eriRouterOpticalTransceiverCardSlotThe chassis slot number in which the card is present where the Optical Transceiver plugged in.ro EriRouterSlot (ERICSSON-ROUTER-TC) .1.3.6.1.4.1.193.218.2.50.1.1.1.1 |
eriRouterOpticalTransceiverPortThe port number where the Optical Transceiver plugged in.ro EriRouterPort (ERICSSON-ROUTER-TC) .1.3.6.1.4.1.193.218.2.50.1.1.1.2 |
eriRouterOpticalTransceiverTypeType and category of Optical Transceiverro OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.3 |
eriRouterOpticalTransceiverMediaTypeOptical Transceiver Media Typero OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.4 |
eriRouterOpticalTransceiverEriRouterEricssonApprovedIs the Optical Transceiver n this port approved by Ericsson, Yes/No?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.193.218.2.50.1.1.1.5 |
eriRouterOpticalTransceiverDiagMonitoringIs Optical Transceiver Diag Monitoring On or Off?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.193.218.2.50.1.1.1.6 |
eriRouterOpticalTransceiverCLEIcodeOptical Transceiver Common Language Equipment Identifier (CLEI) code.ro OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.7 |
eriRouterOpticalTransceiverSerialNoOptical Transceiver serial numberro OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.8 |
eriRouterOpticalTransceiverFrequencyOptical Transceiver Frequencyro OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.9 |
eriRouterOpticalTransceiverWaveLengthOptical Transceiver Wave Lengthro EriRouterOpticalTransceiverParamWaveLength .1.3.6.1.4.1.193.218.2.50.1.1.1.10 |
eriRouterOpticalTransceiverAdditionalFeaturesOptical Transceiver Additional Features such as, Is Optical Transceiver OTN capable? and/or Is Optical Transceiver Tunable?ro OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.11 |
eriRouterOpticalTransceiverFrequencyStartFrequency Start for tunable optical transceiver. Not applicable if optical transceiver is not tunablero OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.12 |
eriRouterOpticalTransceiverFrequencyEndFrequency End for tunable optical transceiver. Not applicable if optical transceiver is not tunablero OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.13 |
eriRouterOpticalTransceiverFrequencySpacingFrequency Spacing for tunable optical transceiver. Not applicable if optical transceiver is not tunablero OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.14 |
eriRouterOpticalTransceiverOTNFramerFramer of OTN if optical transceiver is OTN capable. Not applicable if optical transceiver is not OTN capablero OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.15 |
eriRouterOpticalTransceiverOTNFECFEC of OTN if optical transceiver is OTN capable. Not applicable if optical transceiver is not OTN capablero OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.16 |
eriRouterOpticalTransceiverPowerLevelOptical Transceiver Power Levelro OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.1.1.17 |
eriRouterOpticalTransceiverActiveAlarmCountNumber of alarms active on the Optical Transceiverro INTEGER .1.3.6.1.4.1.193.218.2.50.1.1.1.18 |
eriRouterOpticalTransceiverParamBitMaskThis Bit Mask indicates which values are valid for EriRouterOpticalTransceiverParamType in eriRouterOpticalTransceiverParamTable: 0x0001 optical transceiver txpower valid 0x0002 optical transceiver rxpower valid 0x0004 optical transceiver temperature valid 0x0008 optical transceiver laserBiasCurrent valid 0x0010 optical transceiver soaBiasCurrent valid 0x0020 optical transceiver Vcc valid 0x0040 optical transceiver aux1 valid 0x0080 optical transceiver aux2 valid 0x0100 optical transceiver lane txpower valid 0x0200 optical transceiver lane rxpower valid 0x0400 optical transceiver lane temperature valid 0x0800 optical transceiver lane laserBiasCurrent validro Integer32 .1.3.6.1.4.1.193.218.2.50.1.1.1.19 |
eriRouterOpticalTransceiverLaneCountNumber of Lanes in optical transceiverro INTEGER .1.3.6.1.4.1.193.218.2.50.1.1.1.20 |
eriRouterOpticalTransceiverParamTableThis table provides objects to monitor optical transceiver parameters in a network element. It also provides objects for monitoring high and low warning and alarm threshold on these monitored parameters. SEQUENCE OF EriRouterOpticalTransceiverParamEntry .1.3.6.1.4.1.193.218.2.50.1.2 |
eriRouterOpticalTransceiverParamEntryOpticalTransceiver Parameter Entries in Table EriRouterOpticalTransceiverParamEntry .1.3.6.1.4.1.193.218.2.50.1.2.1 |
eriRouterOpticalTransceiverParamTypeThis object specifies the optical parameter type that is being monitored in this entry.ro EriRouterOpticalTransceiverParamType .1.3.6.1.4.1.193.218.2.50.1.2.1.1 |
eriRouterOpticalTransceiverParamDescriptionThis object specifies the optical parameter description including units that is being monitored in this entry.ro OCTET STRING .1.3.6.1.4.1.193.218.2.50.1.2.1.2 |
eriRouterOpticalTransceiverCurrentValueThe current value of tx power, rx power, temperature, bias current and Vccro EriRouterOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.2.1.3 |
eriRouterOpticalTransceiverMaxAlarmValueThe alarm high threshold value of tx power, rx power, temperature, bias current and Vccro EriRouterOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.2.1.4 |
eriRouterOpticalTransceiverMaxWarningValueThe warning high threshold value of tx power, rx power, temperature, bias current and Vccro EriRouterOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.2.1.5 |
eriRouterOpticalTransceiverMinAlarmValueThe alarm low threshold value of tx power, rx power, temperature, bias current and Vccro EriRouterOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.2.1.6 |
eriRouterOpticalTransceiverMinWarningValueThe warning low threshold value of tx power, rx power, temperature, bias current and Vccro EriRouterOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.2.1.7 |
eriRouterLaneInOpticalTransceiverParamTableThis table provides objects to monitor optical transceiver parameters in a network element. It also provides objects for monitoring high and low warning and alarm threshold on these monitored parameters. SEQUENCE OF EriRouterLaneInOpticalTransceiverParamEntry .1.3.6.1.4.1.193.218.2.50.1.3 |
eriRouterLaneInOpticalTransceiverParamEntryLaneInOpticalTransceiver Parameter Entries in Table EriRouterLaneInOpticalTransceiverParamEntry .1.3.6.1.4.1.193.218.2.50.1.3.1 |
eriRouterLaneInOpticalTransceiverThis object specifies the optical tranceiver lane that is being monitored in this entry.ro Integer32 .1.3.6.1.4.1.193.218.2.50.1.3.1.1 |
eriRouterLaneInOpticalTransceiverParamTypeThis object specifies the optical parameter type that is being monitored in this entry.ro EriRouterLaneInOpticalTransceiverParamType .1.3.6.1.4.1.193.218.2.50.1.3.1.2 |
eriRouterLaneInOpticalTransceiverCurrentValueThe current value of tx power, rx power, temperature, bias current and Vccro EriRouterLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.3.1.3 |
eriRouterLaneInOpticalTransceiverMaxAlarmValueThe alarm high threshold value of tx power, rx power, temperature, bias current and Vccro EriRouterLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.3.1.4 |
eriRouterLaneInOpticalTransceiverMaxWarningValueThe warning high threshold value of tx power, rx power, temperature, bias current and Vccro EriRouterLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.3.1.5 |
eriRouterLaneInOpticalTransceiverMinAlarmValueThe alarm low threshold value of tx power, rx power, temperature, bias current and Vccro EriRouterLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.3.1.6 |
eriRouterLaneInOpticalTransceiverMinWarningValueThe warning low threshold value of tx power, rx power, temperature, bias current and Vccro EriRouterLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.193.218.2.50.1.3.1.7 |