ANS-GS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ANS-GS-MIB.
260
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
260 total| Object Name |
|---|
connections OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4 |
IMPORTS Unknown .1.3.6.1.4.1.193.96.115.4 |
accessUserPort OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.1 |
ansAccessUserPortTableEntries in the ansAccessUserPortTable represents
the physical ATM interface towards the STU located in the
NIU and will be of type 'ATM'. SEQUENCE OF AnsAccessUserPortEntry .1.3.6.1.4.1.193.96.115.4.1.1 |
ansAccessUserPortEntry AnsAccessUserPortEntry .1.3.6.1.4.1.193.96.115.4.1.1.1 |
ansAccessUserPortSystemNodeReference to the system node the user port is
contained within.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.1 |
ansAccessUserPortSubrackReference to the subrack the user port belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.2 |
ansAccessUserPortPositionReference to the board the user port belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.3 |
ansAccessUserPortIndexReference to the interface within the board.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.4 |
ansAccessUserPortTypeIndicates the type of physical interface that
is connected to the port.ro AnsPortType .1.3.6.1.4.1.193.96.115.4.1.1.1.5 |
ansAccessUserPortMaxBwDsMaximum cell rate this port is capable of in the
downstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.6 |
ansAccessUserPortMaxBwUsMaximum cell rate this port is capable of in the
upstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.7 |
ansAccessUserPortAvailBwDsAvailable bandwidth in cells per second over the
port in the downstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.8 |
ansAccessUserPortAvailBwUsAvailable bandwidth in cells per second over the
port in the upstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.9 |
ansAccessUserPortMinVpiThe smallest VPI accepted in both directions through
this user port.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.10 |
ansAccessUserPortMaxVpiThe largest VPI accepted in both directions through
this user port.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.11 |
ansAccessUserPortMinVciThe smallest VCI accepted in both directions through
this user port.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.12 |
ansAccessUserPortMaxVciThe largest VCI accepted in both directions through
this user port.ro INTEGER .1.3.6.1.4.1.193.96.115.4.1.1.1.13 |
ansAccessUserPortLabelA settable name or description of this user port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.1.1.1.14 |
ansAccessUserPortOperStatusro Enumeration .1.3.6.1.4.1.193.96.115.4.1.1.1.15 |
ansAccessUserPortAdminStatusrw Enumeration .1.3.6.1.4.1.193.96.115.4.1.1.1.16 |
ansAccessUserPortUsageStatero Enumeration .1.3.6.1.4.1.193.96.115.4.1.1.1.17 |
ansAccessUserPortAtmFormatrw Enumeration .1.3.6.1.4.1.193.96.115.4.1.1.1.18 |
accessServicePort OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.2 |
ansAccessServicePortTableEntries in the ansAccessServicePortTable represents a
bidirectional STM1 port in the RF-shelf. SEQUENCE OF AnsAccessServicePortEntry .1.3.6.1.4.1.193.96.115.4.2.1 |
ansAccessServicePortEntry AnsAccessServicePortEntry .1.3.6.1.4.1.193.96.115.4.2.1.1 |
ansAccessServicePortSystemNodeIndicates wich system node the port is contained
within.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.1 |
ansAccessServicePortSubrackIndicates wich subrack the port is contained within.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.2 |
ansAccessServicePortPositionIndicates the slot position within the subrackro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.3 |
ansAccessServicePortIndexIndicates physical port index on the board.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.4 |
ansAccessServicePortLabelText string that may be used to name the port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.2.1.1.5 |
ansAccessServicePortMaxBwDsMaximum cell rate this port is capable of in the
downstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.6 |
ansAccessServicePortMaxBwUsMaximum cell rate this port is capable of in the
upstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.7 |
ansAccessServicePortAvailBwDsAvailable bandwidth in cells per second over the
port in the downstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.8 |
ansAccessServicePortAvailBwUsAvailable bandwidth in cells per second over the
port in the upstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.9 |
ansAccessServicePortMinVpiThe smallest VPI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.10 |
ansAccessServicePortMaxVpiThe largest VPI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.11 |
ansAccessServicePortMinVciThe smallest VCI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.12 |
ansAccessServicePortMaxVciThe largest VCI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.2.1.1.13 |
ansAccessServicePortOperStatusro Enumeration .1.3.6.1.4.1.193.96.115.4.2.1.1.14 |
ansAccessServicePortAdminStatusrw Enumeration .1.3.6.1.4.1.193.96.115.4.2.1.1.15 |
ansAccessServicePortUsageStatero Enumeration .1.3.6.1.4.1.193.96.115.4.2.1.1.16 |
ansAccessServicePortAtmFormatrw Enumeration .1.3.6.1.4.1.193.96.115.4.2.1.1.17 |
ansAccessServicePortTypeIndicates the type of physical interface that
is connected to the service port.ro AnsPortType .1.3.6.1.4.1.193.96.115.4.2.1.1.18 |
accessServiceUserPort OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.3 |
ansAccessServiceUserPortTableEntries in the ansAccessServiceUserPortTable represents a
bidirectional STM1 port in the RF-shelf. SEQUENCE OF AnsAccessServiceUserPortEntry .1.3.6.1.4.1.193.96.115.4.3.1 |
ansAccessServiceUserPortEntry AnsAccessServiceUserPortEntry .1.3.6.1.4.1.193.96.115.4.3.1.1 |
ansAccessServiceUserPortSystemNodeIndicates wich system node the port is contained
within.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.1 |
ansAccessServiceUserPortSubrackIndicates wich subrack the port is contained within.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.2 |
ansAccessServiceUserPortPositionIndicates the slot position within the subrackro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.3 |
ansAccessServiceUserPortIndexIndicates physical port index on the board.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.4 |
ansAccessServiceUserPortLabelText string that may be used to name the port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.3.1.1.5 |
ansAccessServiceUserPortMaxBwDsMaximum cell rate this port is capable of in the
downstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.6 |
ansAccessServiceUserPortMaxBwUsMaximum cell rate this port is capable of in the
upstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.7 |
ansAccessServiceUserPortAvailBwDsAvailable bandwidth in cells per second over the
port in the downstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.8 |
ansAccessServiceUserPortAvailBwUsAvailable bandwidth in cells per second over the
port in the upstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.9 |
ansAccessServiceUserPortMinVpiThe smallest VPI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.10 |
ansAccessServiceUserPortMaxVpiThe largest VPI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.11 |
ansAccessServiceUserPortMinVciThe smallest VCI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.12 |
ansAccessServiceUserPortMaxVciThe largest VCI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.3.1.1.13 |
ansAccessServiceUserPortOperStatusro Enumeration .1.3.6.1.4.1.193.96.115.4.3.1.1.14 |
ansAccessServiceUserPortAdminStatusrw Enumeration .1.3.6.1.4.1.193.96.115.4.3.1.1.15 |
ansAccessServiceUserPortUsageStatero Enumeration .1.3.6.1.4.1.193.96.115.4.3.1.1.16 |
ansAccessServiceUserPortAtmFormatrw Enumeration .1.3.6.1.4.1.193.96.115.4.3.1.1.17 |
ansAccessServiceUserPortTypeIndicates the type of physical interface that
is connected to the service-user port.ro AnsPortType .1.3.6.1.4.1.193.96.115.4.3.1.1.18 |
accessInternalPort OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.4 |
ansAccessInternalPortTableEntries in the ansAccessInternalPortTable represents a
bidirectional STM1 port SEQUENCE OF AnsAccessInternalPortEntry .1.3.6.1.4.1.193.96.115.4.4.1 |
ansAccessInternalPortEntry AnsAccessInternalPortEntry .1.3.6.1.4.1.193.96.115.4.4.1.1 |
ansAccessInternalPortSystemNodeIndicates wich system node the port is contained
within.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.1 |
ansAccessInternalPortSubrackIndicates wich subrack the port is contained within.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.2 |
ansAccessInternalPortPositionIndicates the slot position within the subrackro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.3 |
ansAccessInternalPortIndexIndicates physical port index on the board.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.4 |
ansAccessInternalPortLabelText string that may be used to name the port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.4.1.1.5 |
ansAccessInternalPortMaxBwDsMaximum cell rate this port is capable of in the
downstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.6 |
ansAccessInternalPortMaxBwUsMaximum cell rate this port is capable of in the
upstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.7 |
ansAccessInternalPortAvailBwDsAvailable bandwidth in cells per second over the
port in the downstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.8 |
ansAccessInternalPortAvailBwUsAvailable bandwidth in cells per second over the
port in the upstream direction.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.9 |
ansAccessInternalPortMinVpiThe smallest VPI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.10 |
ansAccessInternalPortMaxVpiThe largest VPI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.11 |
ansAccessInternalPortMinVciThe smallest VCI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.12 |
ansAccessInternalPortMaxVciThe largest VCI value possible over this port in
both directions.ro INTEGER .1.3.6.1.4.1.193.96.115.4.4.1.1.13 |
ansAccessInternalPortOperStatusro Enumeration .1.3.6.1.4.1.193.96.115.4.4.1.1.14 |
ansAccessInternalPortAdminStatusrw Enumeration .1.3.6.1.4.1.193.96.115.4.4.1.1.15 |
ansAccessInternalPortUsageStatero Enumeration .1.3.6.1.4.1.193.96.115.4.4.1.1.16 |
ansAccessInternalPortAtmFormatrw Enumeration .1.3.6.1.4.1.193.96.115.4.4.1.1.17 |
ansAccessInternalPortTypeIndicates the type of physical interface that
is connected to the internal port.ro AnsPortType .1.3.6.1.4.1.193.96.115.4.4.1.1.18 |
ansAtmCreateCC OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.5 |
ansAtmCreateCCTableEntries in the ansAtmCreateCCTable represents
ATM VP and VP cross-connections between access
user ports and access service ports. SEQUENCE OF AnsAtmCreateCCEntry .1.3.6.1.4.1.193.96.115.4.5.1 |
ansAtmCreateCCEntry AnsAtmCreateCCEntry .1.3.6.1.4.1.193.96.115.4.5.1.1 |
ansAtmCCAUPSystemNodeReference to the system node the access user port
belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.1 |
ansAtmCCAUPSubrackReference to the subrack the access user port
belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.2 |
ansAtmCCAUPPositionReference to user port's slot position within the subrack.ro INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.3 |
ansAtmCCAUPIndexReference to user port's physical interface on the board.ro INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.4 |
ansAtmCCAUPVPIVPI value at the user port.
(100001 = any) Assigned by system.ro INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.5 |
ansAtmCCAUPVCIVCI value at the user port.
(100000 = undefined) Not applicable.
(100001 = any) Assigned by system.ro INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.6 |
ansAtmCCASPSubrackReference to the subrack the access service port
belongs to.rw INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.7 |
ansAtmCCASPPositionReference to access service port port's slot
position within the subrack.rw INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.8 |
ansAtmCCASPIndexReference to access service port's physical
interface on the board.rw INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.9 |
ansAtmCCASPVPIVPI value at the access service port.
(100001 = any) Assigned by system.rw INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.10 |
ansAtmCCASPVCIVCI value at the access service port.
(100000 = undefined) Not applicable.
(100001 = any) Assigned by system.rw INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.11 |
ansAtmCCTypeIndicates if the entry is a VC or VP cross-connection.rw AnsCCType .1.3.6.1.4.1.193.96.115.4.5.1.1.12 |
ansAtmCCServiceClassIndicates ATM bearer service type.
cbr1:
Highest priority constant bit-rate
service, used for circuit emulated
POTS.
cbr2:
Lower priority constant bit-rate
service, used for video transmissions.
ubr:
Lowest priority service, used for
datacom.rw AnsCCServiceClass .1.3.6.1.4.1.193.96.115.4.5.1.1.13 |
ansAtmCCSourceTypeIndicates the type
of service that is transported
on top of the ATM layer.rw AnsCCSourceType .1.3.6.1.4.1.193.96.115.4.5.1.1.14 |
ansAtmCCServiceTypeIndicates the type
of connection ATM or ETHERNET.rw Enumeration .1.3.6.1.4.1.193.96.115.4.5.1.1.15 |
ansAtmCCPcrAtoBBandwidth in cells per second
for the cross-connection in the downstream
direction. UBR connections may be given
any positive cell rate. The -1 indicates
the unspecified value.rw INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.16 |
ansAtmCCPcrBtoABandwidth in cells per second
for the cross-connection in the upstream
direction. UBR connections may be given
any positive cell rate. The -1 indicates
the unspecified value.rw INTEGER .1.3.6.1.4.1.193.96.115.4.5.1.1.17 |
ansAtmCCMultiIndicates if the cross-
connection is part of a point-to-point
or a point-to-multi point connection.rw AnsCCMulti .1.3.6.1.4.1.193.96.115.4.5.1.1.18 |
ansAtmCCAdminStatusIndicetes the administrative
state of the cross-connection.rw AnsCCAdminStatus .1.3.6.1.4.1.193.96.115.4.5.1.1.19 |
ansAtmCCRowStatusUsed to create cross-connect.
To create a cross-connect ansCCRowStatus
must be set to 'createAndGo'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.5.1.1.20 |
ansCeAtmCreateCC OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.6 |
ansCeAtmCreateCCTableEntries in the ansCeAtmCreateCCTable represents
ATM VP and VP cross-connections between access
user ports and access service ports. SEQUENCE OF AnsCeAtmCreateCCEntry .1.3.6.1.4.1.193.96.115.4.6.1 |
ansCeAtmCreateCCEntry AnsCeAtmCreateCCEntry .1.3.6.1.4.1.193.96.115.4.6.1.1 |
ansCeAtmCCAUPSystemNodeReference to the system node the access user port
belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.1 |
ansCeAtmCCAUPSubrackReference to the subrack the access user port
belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.2 |
ansCeAtmCCAUPPositionReference to user port's slot position within the subrack.ro INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.3 |
ansCeAtmCCAUPIndexReference to user port's physical interface on the board.ro INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.4 |
ansCeAtmCCAUPVPIVPI value at the user port.
(100001 = any) Assigned by system.ro INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.5 |
ansCeAtmCCAUPVCIVCI value at the user port.
(100000 = undefined) Not applicable.
(100001 = any) Assigned by system.ro INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.6 |
ansCeAtmCCASPSubrackReference to the subrack the access service port
belongs to.rw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.7 |
ansCeAtmCCASPPositionReference to access service port port's slot
position within the subrack.rw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.8 |
ansCeAtmCCASPIndexReference to access service port's physical
interface on the board.rw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.9 |
ansCeAtmCCASPVPIVPI value at the access service port.
(100001 = any) Assigned by system.rw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.10 |
ansCeAtmCCASPVCIVCI value at the access service port.
(100000 = undefined) Not applicable.
(100001 = any) Assigned by system.rw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.11 |
ansCeAtmCCTypeIndicates if the entry is a VC or VP cross-connection.rw AnsCCType .1.3.6.1.4.1.193.96.115.4.6.1.1.12 |
ansCeAtmCCServiceClassIndicates ATM bearer service type.
cbr1:
Highest priority constant bit-rate
service, used for circuit emulated
POTS.
cbr2:
Lower priority constant bit-rate
service, used for video transmissions.
ubr:
Lowest priority service, used for
datacom.rw AnsCCServiceClass .1.3.6.1.4.1.193.96.115.4.6.1.1.13 |
ansCeAtmCCSourceTypeIndicates the type
of service that is transported
on top of the ATM layer.rw AnsCCSourceType .1.3.6.1.4.1.193.96.115.4.6.1.1.14 |
ansCeAtmCCPcrAtoBBandwidth in cells per second
for the cross-connection in the downstream
direction. UBR connections may be given
any positive cell rate. The -1 indicetes
the unspecified value.rw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.15 |
ansCeAtmCCPcrBtoABandwidth in cells per second
for the cross-connection in the upstream
direction. UBR connections may be given
any positive cell rate. The -1 indicates
the unspecified value.rw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.16 |
ansCeAtmCCMultiIndicates if the cross-
connection is part of a point-to-point
or a point-to-multi point connection.rw AnsCCMulti .1.3.6.1.4.1.193.96.115.4.6.1.1.17 |
ansCeAtmCCAdminStatusIndicetes the administrative
state of the cross-connection.rw AnsCCAdminStatus .1.3.6.1.4.1.193.96.115.4.6.1.1.18 |
ansCeAtmCCTimeSlotPaThe TS list must have the format:
[int1,int2,...].
not_used (unstructured)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.6.1.1.19 |
ansCeAtmCCTypeParw AnsAal1ParsType .1.3.6.1.4.1.193.96.115.4.6.1.1.20 |
ansCeAtmCCFillLevelParw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.21 |
ansCeAtmCCCdvtParw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.22 |
ansCeAtmCCMaxBuffSizePa(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.23 |
ansCeAtmCCTcModeParw AnsAal1ParsTcMode .1.3.6.1.4.1.193.96.115.4.6.1.1.24 |
ansCeAtmCCTcTypeParw AnsAal1ParsTcType .1.3.6.1.4.1.193.96.115.4.6.1.1.25 |
ansCeAtmCCTcBtoAPa(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.26 |
ansCeAtmCCTcAtoBPa(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.6.1.1.27 |
ansCeAtmCCRowStatusUsed to create cross-connect.
To create a cross-connect ansCCRowStatus
must be set to 'createAndGo'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.6.1.1.28 |
ansCeCeCreateCC OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.7 |
ansCeCeCreateCCTableEntries in the ansCeCeCreateCCTable represents
ATM VP and VP cross-connections between access
user ports and access service ports. SEQUENCE OF AnsCeCeCreateCCEntry .1.3.6.1.4.1.193.96.115.4.7.1 |
ansCeCeCreateCCEntry AnsCeCeCreateCCEntry .1.3.6.1.4.1.193.96.115.4.7.1.1 |
ansCeCeCCAUPSystemNodeReference to the system node the access user port
belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.1 |
ansCeCeCCAUPSubrackReference to the subrack the access user port
belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.2 |
ansCeCeCCAUPPositionReference to user port's slot position within the subrack.ro INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.3 |
ansCeCeCCAUPIndexReference to user port's physical interface on the board.ro INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.4 |
ansCeCeCCAUPVPIVPI value at the user port.
(100001 = any) Assigned by system.ro INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.5 |
ansCeCeCCAUPVCIVCI value at the user port.
(100000 = undefined) Not applicable.
(100001 = any) Assigned by system.ro INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.6 |
ansCeCeCCASPSubrackReference to the subrack the access service port
belongs to.rw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.7 |
ansCeCeCCASPPositionReference to access service port port's slot
position within the subrack.rw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.8 |
ansCeCeCCASPIndexReference to access service port's physical
interface on the board.rw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.9 |
ansCeCeCCASPVPIVPI value at the access service port.
(100001 = any) Assigned by system.rw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.10 |
ansCeCeCCASPVCIVCI value at the access service port.
(100000 = undefined) Not applicable.
(100001 = any) Assigned by system.rw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.11 |
ansCeCeCCTypeIndicates if the entry is a VC or VP cross-connection.rw AnsCCType .1.3.6.1.4.1.193.96.115.4.7.1.1.12 |
ansCeCeCCServiceClassIndicates ATM bearer service type.
cbr1:
Highest priority constant bit-rate
service, used for circuit emulated
POTS.
cbr2:
Lower priority constant bit-rate
service, used for video transmissions.
ubr:
Lowest priority service, used for
datacom.rw AnsCCServiceClass .1.3.6.1.4.1.193.96.115.4.7.1.1.13 |
ansCeCeCCSourceTypeIndicates the type
of service that is transported
on top of the ATM layer.rw AnsCCSourceType .1.3.6.1.4.1.193.96.115.4.7.1.1.14 |
ansCeCeCCPcrAtoBBandwidth in cells per second
for the cross-connection in the downstream
direction. UBR connections may be given
any positive cell rate. The -1 indicetes
the unspecified value.rw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.15 |
ansCeCeCCPcrBtoABandwidth in cells per second
for the cross-connection in the upstream
direction. UBR connections may be given
any positive cell rate. The -1 indicates
the unspecified value.rw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.16 |
ansCeCeCCMultiIndicates if the cross-
connection is part of a point-to-point
or a point-to-multi point connection.rw AnsCCMulti .1.3.6.1.4.1.193.96.115.4.7.1.1.17 |
ansCeCeCCAdminStatusrw AnsCCAdminStatus .1.3.6.1.4.1.193.96.115.4.7.1.1.18 |
ansCeCeCCTimeSlotPaThe TS list must have the format:
[int1,int2,...].
not_used (unstructured)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.7.1.1.19 |
ansCeCeCCTypeParw AnsAal1ParsType .1.3.6.1.4.1.193.96.115.4.7.1.1.20 |
ansCeCeCCFillLevelParw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.21 |
ansCeCeCCCdvtParw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.22 |
ansCeCeCCMaxBuffSizePa(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.23 |
ansCeCeCCTcModeParw AnsAal1ParsTcMode .1.3.6.1.4.1.193.96.115.4.7.1.1.24 |
ansCeCeCCTcTypeParw AnsAal1ParsTcType .1.3.6.1.4.1.193.96.115.4.7.1.1.25 |
ansCeCeCCTcBtoAPa(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.26 |
ansCeCeCCTcAtoBPa(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.27 |
ansCeCeCCTimeSlotPbThe TS list must have the format:
[int1,int2,...].
not_used (unstructured)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.7.1.1.28 |
ansCeCeCCTypePbrw AnsAal1ParsType .1.3.6.1.4.1.193.96.115.4.7.1.1.29 |
ansCeCeCCFillLevelPbrw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.30 |
ansCeCeCCCdvtPbrw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.31 |
ansCeCeCCMaxBuffSizePb(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.32 |
ansCeCeCCTcModePbrw AnsAal1ParsTcMode .1.3.6.1.4.1.193.96.115.4.7.1.1.33 |
ansCeCeCCTcTypePbrw AnsAal1ParsTcType .1.3.6.1.4.1.193.96.115.4.7.1.1.34 |
ansCeCeCCTcBtoAPb(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.35 |
ansCeCeCCTcAtoBPb(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.7.1.1.36 |
ansCeCeCCRowStatusUsed to create cross-connect.
To create a cross-connect ansCCRowStatus
must be set to 'createAndGo'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.7.1.1.37 |
ansCrossConnect OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.8 |
ansCrossConnectTableEntries in the ansCrossConnectTable represents
ATM VP and VP cross-connections between access
user ports and access service ports. SEQUENCE OF AnsCrossConnectEntry .1.3.6.1.4.1.193.96.115.4.8.1 |
ansCrossConnectEntry AnsCrossConnectEntry .1.3.6.1.4.1.193.96.115.4.8.1.1 |
ansCCAUPSystemNodeReference to the system node the access user port
belongs to. INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.1 |
ansCCAUPSubrackReference to the subrack the access user port
belongs to. INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.2 |
ansCCAUPPositionReference to user port's slot position within the subrack. INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.3 |
ansCCAUPIndexReference to user port's physical interface on the board. INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.4 |
ansCCAUPVPIVPI value at the user port. INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.5 |
ansCCAUPVCIVCI value at the user port.
(100000 = undefined) Not applicable. INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.6 |
ansCCASPSubrackReference to the subrack the access service port
belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.7 |
ansCCASPPositionReference to access service port port's slot
position within the subrack.ro INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.8 |
ansCCASPIndexReference to access service port's physical
interface on the board.ro INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.9 |
ansCCASPVPIVPI value at the access service port.ro INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.10 |
ansCCASPVCIVCI value at the access service port.
(100000 = undefined) Not applicable.ro INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.11 |
ansCCTypeIndicates if the entry is a VC or VP cross-connection.ro AnsCCType .1.3.6.1.4.1.193.96.115.4.8.1.1.12 |
ansCCServiceClassIndicates ATM bearer service type.
cbr1:
Highest priority constant bit-rate
service, used for circuit emulated
POTS.
cbr2:
Lower priority constant bit-rate
service, used for video transmissions.
ubr:
Lowest priority service, used for
datacom.ro AnsCCServiceClass .1.3.6.1.4.1.193.96.115.4.8.1.1.13 |
ansCCPcrAtoBBandwidth in cells per second
for the cross-connection in the downstream
direction. UBR connections may be given
any positive cell rate. The -1 indicates
unspecified value.ro INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.14 |
ansCCPcrBtoABandwidth in cells per second
for the cross-connection in the upstream
direction. UBR connections may be given
any positive cell rate. The -1 indicates
unspecified value.ro INTEGER .1.3.6.1.4.1.193.96.115.4.8.1.1.15 |
ansCCSourceTypeIndicates the type
of service that is transported
on top of the ATM layer.ro AnsCCSourceType .1.3.6.1.4.1.193.96.115.4.8.1.1.16 |
ansCCServiceTypeIndicates the type
of connection CE, ATM or ETHERNET.ro Enumeration .1.3.6.1.4.1.193.96.115.4.8.1.1.17 |
ansCCOperStatusro Enumeration .1.3.6.1.4.1.193.96.115.4.8.1.1.18 |
ansCCLastOperStatusChangeThe time this VP cross-connect
entered its current operational state.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.8.1.1.19 |
ansCCAdminStatusrw AnsCCAdminStatus .1.3.6.1.4.1.193.96.115.4.8.1.1.20 |
ansCCMultiIndicates if the cross-
connection is part of a point-to-point
or a point-to-multi point connection.ro AnsCCMulti .1.3.6.1.4.1.193.96.115.4.8.1.1.21 |
ansCCRowStatusUsed to delete cross-connect.
A cross-connection is removed by seting
the attribute to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.8.1.1.22 |
ansApplData OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.9 |
ansApplDataTable SEQUENCE OF AnsApplDataEntry .1.3.6.1.4.1.193.96.115.4.9.1 |
ansApplDataEntry AnsApplDataEntry .1.3.6.1.4.1.193.96.115.4.9.1.1 |
ansApplDataSystemNodeReference to the system node the access user port
belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.9.1.1.1 |
ansApplDataSubrackReference to the subrack the access user port
belongs to.ro INTEGER .1.3.6.1.4.1.193.96.115.4.9.1.1.2 |
ansApplDataPositionReference to user port's slot position within the subrack.ro INTEGER .1.3.6.1.4.1.193.96.115.4.9.1.1.3 |
ansApplDataIndexReference to user port's physical interface on the board.ro INTEGER .1.3.6.1.4.1.193.96.115.4.9.1.1.4 |
ansApplDataVPIVPI value at the user port.ro INTEGER .1.3.6.1.4.1.193.96.115.4.9.1.1.5 |
ansApplDataVCIVCI value at the user port.ro INTEGER .1.3.6.1.4.1.193.96.115.4.9.1.1.6 |
ansApplDataOpStatero Enumeration .1.3.6.1.4.1.193.96.115.4.9.1.1.7 |
ansApplDataAdminStaterw Enumeration .1.3.6.1.4.1.193.96.115.4.9.1.1.8 |
ansApplDataServiceParamsro Enumeration .1.3.6.1.4.1.193.96.115.4.9.1.1.9 |
ansAal1Pars OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.10 |
ansAal1ParsTable SEQUENCE OF AnsAal1ParsEntry .1.3.6.1.4.1.193.96.115.4.10.1 |
ansAal1ParsEntry AnsAal1ParsEntry .1.3.6.1.4.1.193.96.115.4.10.1.1 |
ansAal1ParsTimeSlotThe TS list has the format:
[int1,int2,...].
not_used (unstructured)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.10.1.1.1 |
ansAal1ParsTypero Enumeration .1.3.6.1.4.1.193.96.115.4.10.1.1.2 |
ansAal1ParsFillLevel(-1) undefinedro INTEGER .1.3.6.1.4.1.193.96.115.4.10.1.1.3 |
ansAal1ParsCdvt(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.10.1.1.4 |
ansAal1ParsMaxBuffSize(-1) undefinedrw INTEGER .1.3.6.1.4.1.193.96.115.4.10.1.1.5 |
ansAal1ParsTcModero Enumeration .1.3.6.1.4.1.193.96.115.4.10.1.1.6 |
ansAal1ParsTcTypero Enumeration .1.3.6.1.4.1.193.96.115.4.10.1.1.7 |
ansAal1ParsTcBtoA(-1) undefinedro INTEGER .1.3.6.1.4.1.193.96.115.4.10.1.1.8 |
ansAal1ParsTcAtoB(-1) undefinedro INTEGER .1.3.6.1.4.1.193.96.115.4.10.1.1.9 |
ansEthPars OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.11 |
ansEthParsTable SEQUENCE OF AnsEthParsEntry .1.3.6.1.4.1.193.96.115.4.11.1 |
ansEthParsEntry AnsEthParsEntry .1.3.6.1.4.1.193.96.115.4.11.1.1 |
ansEthParsPcrShaping(-1) unspecified.ro INTEGER .1.3.6.1.4.1.193.96.115.4.11.1.1.1 |
ethernetPort OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.12 |
ethernetPortTableEntries in the ethernetPortTable represents
extension records of the ethernet ports in the
ansAccessUserPortTable. SEQUENCE OF EthernetPortEntry .1.3.6.1.4.1.193.96.115.4.12.1 |
ethernetPortEntry EthernetPortEntry .1.3.6.1.4.1.193.96.115.4.12.1.1 |
ethernetPortFcsEncapsulationTurn the sending off FCS checksum on or off.rw Enumeration .1.3.6.1.4.1.193.96.115.4.12.1.1.1 |
ethernetPortMuxOrEncapsulationReference to transfer of ethernet frames.rw Enumeration .1.3.6.1.4.1.193.96.115.4.12.1.1.2 |
ethernetPortIpAddressIP adress of the NT when attribute
ethernetPortMuxOrEncapsulation is set to pppVc or pppLlcro IpAddress .1.3.6.1.4.1.193.96.115.4.12.1.1.3 |
ethernetPortTypeEthernet Typero Enumeration .1.3.6.1.4.1.193.96.115.4.12.1.1.4 |
ethernetPortOperatingModeEthernet Typerw Enumeration .1.3.6.1.4.1.193.96.115.4.12.1.1.5 |
pdhPort OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.13 |
pdhPortTablePDH Port Table SEQUENCE OF PDHPortEntry .1.3.6.1.4.1.193.96.115.4.13.1 |
pdhPortEntryThis entity represents a PDH port for circuit emulation. PDHPortEntry .1.3.6.1.4.1.193.96.115.4.13.1.1 |
pdhPortPortPort at AT and CE boardro INTEGER .1.3.6.1.4.1.193.96.115.4.13.1.1.1 |
pdhPortTsUsedTimeslot usedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.96.115.4.13.1.1.2 |
pdhPortClockMode...rw Enumeration .1.3.6.1.4.1.193.96.115.4.13.1.1.3 |
pdhPortHaulMode...rw Enumeration .1.3.6.1.4.1.193.96.115.4.13.1.1.4 |
pdhPortLineCodehdb3 valid for ansAccessUser/ServicePortType = e1
ami valid for ansAccessUser/ServicePortType = ds1
b8zs valid for ansAccessUser/ServicePortType = ds1rw Enumeration .1.3.6.1.4.1.193.96.115.4.13.1.1.5 |
pdhPortLoopback...rw Enumeration .1.3.6.1.4.1.193.96.115.4.13.1.1.6 |
pdhPortCas...rw Enumeration .1.3.6.1.4.1.193.96.115.4.13.1.1.7 |
pdhPortFrameFormat...rw Enumeration .1.3.6.1.4.1.193.96.115.4.13.1.1.8 |
pdhPortServiceType...rw Enumeration .1.3.6.1.4.1.193.96.115.4.13.1.1.9 |
terminalId OBJECT IDENTIFIER .1.3.6.1.4.1.193.96.115.4.14 |
ansTerminalIdTableEntries in the ansTerminalIdTable represent the system node,
subrack and position of ATs; These pieces of information
can be used as an index into terminal specific tables to obtain
complete information SEQUENCE OF AnsTerminalIdEntry .1.3.6.1.4.1.193.96.115.4.14.1 |
ansTerminalIdEntry AnsTerminalIdEntry .1.3.6.1.4.1.193.96.115.4.14.1.1 |
ansTerminalIdIdentAn index that uniquely identifies an ATro DisplayString .1.3.6.1.4.1.193.96.115.4.14.1.1.1 |
ansTerminalIdSystemNodeReference to the system node the AT belongs toro INTEGER .1.3.6.1.4.1.193.96.115.4.14.1.1.2 |
ansTerminalIdSubrackReference to the subrack the AT belongs toro INTEGER .1.3.6.1.4.1.193.96.115.4.14.1.1.3 |
ansTerminalIdPositionReference to the slot the AT belongs toro INTEGER .1.3.6.1.4.1.193.96.115.4.14.1.1.4 |
More MIBs from Put the right things here
Browse all Put the right things hereMIBs →XF-RADIOLINK-PTP-TERMINAL-MIB
The XF-RADIOLINK-PTP-TERMINAL-MIB enables SNMP-based monitoring and management of point-to-point Radiolink terminal hardware, specifically exposing operational metrics such as link status, signal quality parameters, and interface statistics for terminal-level devices.
463 objects→
XF-RADIOLINK-RLT-MIB
The XF-RADIOLINK-RLT-MIB provides SNMP management objects for monitoring Radio Link Terminals (RLT) and Carrier Terminations (CT) on Ericsson MINI-LINK TN radios, specifically enabling visibility into dual-carrier configuration states and operational parameters. This module facilitates the tracking of carrier-specific link metrics, including signal quality, error counters, and interface status for both primary and secondary carrier paths within the radio link application.
369 objects→
ERICSSON-ROUTER-PRODUCT-MIB
SNMP MIB module
364 objects→
ANS-MLBAS-MIB
Standard SNMP MIB module defining data structures for ANS-MLBAS-MIB.
232 objects→
XF-RADIOLINK-PTP-RADIO-MIB
The XF-RADIOLINK-PTP-RADIO-MIB provides SNMP management objects for monitoring and configuring Point-to-Point (PTP) Radio Access Units (RAUs), specifically exposing performance metrics such as link status, signal strength, error counters, and interface statistics for Xirrus wireless infrastructure.
217 objects→
ERICSSON-ROUTER-QOS-MIB
SNMP MIB module
217 objects→