Home/Catalog/XF-RADIOLINK-PTP-TERMINAL-MIB

XF-RADIOLINK-PTP-TERMINAL-MIB

AI MIB Summary

The XF-RADIOLINK-PTP-TERMINAL-MIB enables SNMP-based monitoring and management of point-to-point Radiolink terminal hardware, specifically exposing operational metrics such as link status, signal quality parameters, and interface statistics for terminal-level devices.

This MIB defines objects on terminal level for point-to-point Radiolink terminals.
Main OID:
xfRadioLinkPtpTerminalMIB.1.3.6.1.4.1.193.81.3.4.1
457
Objects
Active
Status
9
Dependencies

Imported Objects

ENTITY-MIB
IF-MIB
PerfHist-TC-MIB
HC-PerfHist-TC-MIB
SNMPv2-CONF
SNMPv2-TC
SNMPv2-SMI
SNMP-FRAMEWORK-MIB
XF-TOP-MIB

Objects

457 total
Object Name
xfRadioLinkPtpTerminalMIBThis MIB defines objects on terminal level for point-to-point Radiolink terminals.
MODULE-IDENTITY
.1.3.6.1.4.1.193.81.3.4.1
xfRadioLinkPtpTerminalObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.193.81.3.4.1.1
xfRLPtpTerminalTableTable for Radiolink point-to-point terminal managed objects. The table is indexed with entLogicalIndex.
SEQUENCE OF XfRLPtpTerminalEntry
.1.3.6.1.4.1.193.81.3.4.1.1.1
xfRLPtpTerminalEntryAn entry in the xfRLPtpTerminalTable
XfRLPtpTerminalEntry
.1.3.6.1.4.1.193.81.3.4.1.1.1.1
xfTermIdNetwork identity for terminal. Same as GNM id. Note! Id TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set. Default = .TRMA. (also for Far End) Near end access: read-write Far end access: read-write (Traffic Node), read-only (other)rw
SnmpAdminString
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.1
xfTermTypeTerminal type - other - Unknown - rlMLE - MLE classic - rlXfMLE - MMU2 - rlXfMLTN - MMU2B - rlXfMLStandalone(5) - MMU2 CS - rlXfMLTNPT(6) - Pt1ro
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.2
xfTermProtectionThis object sets the protection mode of the terminal. - other - Unknown - unprotected - 1+0 - protectedHotStandby - 1+1 Hot - protectedWorkingStandby - 1+1 Working - UnProtectedSDC - 1+0 with Space Diversity - enhancedRLB - Enhanced Radio Link Bonding (1+1 PDH and 1+1/2+0 Ethernet) Default value: unprotected(2) Near end access: read-write Far end access: read-write (Traffic Node), read-only (other)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.3
xfTermCapacityThis object sets the capacity on the terminal * other - Unknown * twoE1 - 2x2 Mbps * fourE1 - 4*2 Mbps (only rlMLE) * oneE2 - 8 Mbps * twoE2 - 2x8 Mbps * oneE3oneE1 - 34+2 Mbps * twoE3 - 2x34 Mbps * fourE3 - 4*34 Mbps * fourDS1 - 4xDS1 * eightDS1 - 8xDS1 * sixteenDS1 - 16*DS1 * seventeenDS1 - 16DS1+DS1 * oneStm0 - STM-0 * oneStm1oneE1 - STM-1+2 * thirtytwoDS1 - 32xDS1 * oneStm1oneDS1 - STM-1+DS1 * oneStm1oneE1at50MHz - STM-1+2 Mpbs @ 50 MHz * twentytwoE1 - 22xE1 * thirtyfiveE1 - 35xE1 * fortysixE1 - 46xE1 * seventyfiveE1 - 75xE1 * oneStm1OneJ1 - 1xSTM-1 + 1xJ1 * sixtynineDS1 - 69xDS1 * eightyDS1 - 80xDS1 * oneStm1OneE1LH - STM-1+2 for LH * oneStm1OneDS1LH - STM-1+DS1 for LH Default value PDH CQPSK ETSI: twoE1(2) MMU2, MMU2 B, MMU2 C Default value PDH CQPSK ANSI: fourDS1(9) MMU2 BA, MMU2 CA Default value PDH QAM ETSI: twentytwoE1(18) MMU2 D Default value PDH QAM ANSI: sixtynineDS1(23) MMU2 DA Default value SDH ETSI: oneStm1oneE1(14) MMU2 E, MMU2 F Default value SDH ANSI: oneStm1oneDS1(16) MMU2 E, MMU2 F Near end access: read-write Far end access: read-write (Traffic Node), read-only (MLE) Note that setting far end xfTermCapacity will remove far end traffic cross connects. oneStm1oneE1(14) and oneStm1oneE1at50MHz(17) has the same capacity and modulation but at different bandwidth, hence the two values. Capacities above 2xE1 for MMU2 B OFH, MMU2 C OFH, ATU and ATU B OFH are under license control.rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.4
xfTermCapacityCapabilityThis object shows the capacity capability on the terminal. Binary AND on contained modems units capabilities.ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.5
xfTermModulationThis object sets the modulation method on the terminal. Legal settable values are: - cqpsk(2) CQPSK - qam16(3) 16-QAM - qam128(4) 128-QAM - qam32(5) 32-QAM - qam64(6) 64-QAM Default value PDH CQPSK ETSI: cqpsk(2) MMU2, MMU2 B, MMU2 C Default value PDH CQPSK ANSI: cqpsk(2) MMU2 BA, MMU2 CA Default value PDH QAM ETSI: qam16(3) MMU2 D Default value PDH QAM ANSI: qam128(4) MMU2 DA Default value SDH ETSI: qam128(4) MMU2 E, MMU2 F Default value SDH ANSI: qam128(4) MMU2 E, MMU2 F Near end access: read-write Far end access: read-write (Traffic Node), read-only (other) Note that setting far end xfTermModulation might remove far end traffic connections. Modulation other than CQPSK for MMU2 C OFH are under license control.rw
TermModulation
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.6
xfTermModulationCapabilityThis object shows the modulation capability on the terminal. Binary AND on contained modems and radio units capabilities.ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.7
xfTermRestorerlXfMLTN: Restore command is clearing RF, IF and RxLoop, enable xfTermTrapEnable, turn transmitter on and set protection switch mode to Auto. In case of MMU2 E and MMU2 F it also clears the STM-1 Line Loop and Local Loop. Far end rlMLE and rlXfMLE: Restore command sets P-mark to off, all loops are set to off, all Test Port connections are removed, Transmitter is set to On and Switch Mode is set to Auto.rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.8
xfTermAlarmSeverityThis object shows the highest alarm severity for contained units and interfaces in the terminal including E1, E2 and E3 interfaces. Terminal alarm severity is indicated by 3 bits: bits 012 000 clear 001 undetermined 010 warning 011 minor 100 major 101 critical 110 not defined 111 not applicablero
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.9
xfTermTrapEnableDisables/enables trap sending from this terminal. Note, terminals with termType = rlXfMLE will not include E1, E2 and E3 interfaces. Default value: enable(2)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.10
xfTermAsPortrlXfMLTN: Access server port used to reach far end terminals of type rlMLE or rlXfMLE, else notAvailable (1). rlXfMLE: Access server port used to reach a near end terminal of type rlXfMLE. aspX002 - Port 3002/4002 .. - .. aspX021 - Port 3021/4021 Note, Last available port differs between different AMMs. AMM 2p: aspX003 AMM 6p: aspX006 AMM 20p: aspX021 Near end access: read-only Far end access: no accessro
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.11
xfTermRemoteIdCheckThis object sets if check of identity of remote terminal shall be performed or not. Legal values are: - enable(2): radio id check enabled - disable(3): radio id check disabled Default value: disable(3)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.12
xfTermRemoteIdNetwork identity for remote terminal. Same as GNM id. Note: TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set. A change of the far end value might disconnect IP DCN, but internal GNM connection will not be disconnected. Default value: TRMB (initial)rw
SnmpAdminString
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.13
xfTermPresetFor terminals with termType = rlXfMLE or rlMLE: - Terminal is restored with factory settings. - Protected terminals will be set to unprotected. For terminals with termType = rlXfMLTN: - Terminal is restored with default configuration. Near end access: read-write Far end access: no accessrw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.14
xfTermBerAlarmThresholdThreshold for BER alarm. Legal values: - ber1e3(2): BER=1e-3 (default) - ber1e4(3): BER=1e-4 - ber1e5(4): BER=1e-5 - ber1e6(5): BER=1e-6rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.15
xfTermFadeNotificationTimerNotification suppression timer for protection alarms. Unit: 1 sec Value range: 0-1000 Default value: 200 Near end access: read-write Far end access: read-only (Traffic Node)rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.16
xfTermEquipmentProtectionIndexUnprotected: 0 Protected: EntPhysicalindex of MMU in lowest slotro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.17
xfTermSysNameThe system name of the TN hosting the terminal. Near end terminal: a zero-length string is returned as MIB-II/system/sysName should be used instead. Far end terminal: the system name is returned.ro
DisplayString
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.18
xfTermChannelModeChannel mode for the terminal (administrative status). This is only settable according to xfTermChannelModeCapability. Legal values are: - ccdp(2): Co-Channel Dual Polarization (XPIC) - accp(3): Adjacent Channels Co-Polarization (non-XPIC) - acap(4): Adjacent Channels Alternate Polarization (non-XPIC) Default value: acap(4) Near end access: read-write Far end access: read-write (Traffic Node only)rw
ChannelMode
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.19
xfTermChannelModeCapabilityChannel mode capability. Legal values are: - ccdp(0) ........ Co-Channel Dual Polarization (XPIC) - accp(1) ........ Adjacent Channels Co-Polarization (non-XPIC) - acap(2) ........ Adjacent Channels Alternate Polarization (non-XPIC) - ccdp16QAM(3).... Co-Channel Dual Polarization (XPIC) for 16QAM only on MMU2 F - ccdp64QAM(4).... Co-Channel Dual Polarization (XPIC) for 64QAM only on MMU2 F - ccdp128QAM(5)... Co-Channel Dual Polarization (XPIC) for 128QAM only on MMU2 F Default value: acap(2) Near end access: read-write Far end access: read-write (Traffic Node only)ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.20
xfTermTrafficAndDCNEnable or disable traffic. AIS is generated on all traffic interfaces when traffic is disabled, i.e. xfTermTrafficAndDCN = DCNOnly. The hop and DCN is working, though (primarily used for license handling). Default value: trafficAndDCN(1) Near end access: read-write Far end access: read-write (Traffic Node only)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.21
xfTermFrameFormatThe frame format version used by the modem. Legal values are: - version0(2) only valid for MMU2 C modems - version1(3) only valid for MMU2 C modem. Default value: other(1) Near end access: read-write Far end access: read-write (Traffic Node only)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.22
xfTermFrameFormatCapabilityFrame format versions supported by the modem. Bit 0: modem MMU2 C supports frame format Version 0 Bit 1: modem MMU2 C supports frame format Version 1 (for QAM 2xE2, E3+E1 and 2xE3)ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.23
xfTermDCNRadioConfigurationDCN radio capacity for terminal. Legal values are: - dcnRadio128kbps(2) RFCOH channel only: all RSOH bytes pass transparently over the hop - dcnRadio320kbpsDCCr(3) 128 kbps + DCCr (default) - dcnRadio320kbpsMSB (4) 128 kbps + MSB Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)] are used when 320kbpsMSB value is selected. Near end access: read-write Far end access: read-write (Traffic Node only)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.24
xfTermDCNRadioCapabilityBinary AND on contained MMUs DCN radio configuration capability. bits 210 000 undetermined 001 128kbps 010 320kbpsDCCr 100 320kbpsMSB ... 111 128kbps & 320kbpsDCCr & 320kbpsMSBro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.25
xfTermDCNLineConfigurationDCN line capacity for terminal. Legal values are: transparent(2) All RSOH bytes pass transparently over the hop. dcnLine192kbpsDCCr(3) (default) DCCr dcnLine192kbpsMSB(4) MSB Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)] are used when 192kbpsMSB value is selected. Default value: dcnLine192kbpsDCCr(3) Near end access: read-write Far end access: read-write (Traffic Node only)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.26
xfTermDCNLineCapabilityBinary AND on contained MMUs DCN line configuration. bits 210 000 undetermined 001 transparent 010 192kbpsDCCr 100 192kbpsMSB ... 111 transparent & 192kbpsDCCr & 192kbpsMSBro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.27
xfTermFadeNotificationConfigurationThis object enables or disables the notification suppress timer for Protection alarm. Default value: enabled(3), Near end access: read-write Far end access: read-write (Traffic Node only)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.28
xfTermLineProtectionAdministrative status of the line protection for a terminal physical line interface, e.g. MMU2 E and MMU2 F. Operational status is xfRLLineProtectionMode. Legal values are: other(1) (Not settable) unProtected(2) singleInterfaceLowSlot(3) SI low slot singleInterfaceHighSlot(4) SI high slot opticalSplitter(5) EEP equipmentAndLineProtection(6). ELP Default value: unProtected(2) Near end access: read-write Far end access: read-write (Traffic Node only)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.1.1.29
xfRLPtpTerminalOutputPowerTableTable for Radiolink point-to-points terminal output power managed objects. The tabled is indexed with entLogicalIndex.
SEQUENCE OF XfRLPtpTerminalOutputPowerEntry
.1.3.6.1.4.1.193.81.3.4.1.1.2
xfRLPtpTerminalOutputPowerEntryAn entry in the xfRLPtpTerminalOutputPowerTable
XfRLPtpTerminalOutputPowerEntry
.1.3.6.1.4.1.193.81.3.4.1.1.2.1
xfTermOutputPowerOperStatusThis object shows the output power mode that is running. It is necessarily not equal to configured mode.ro
TermOutputPowerStatus
.1.3.6.1.4.1.193.81.3.4.1.1.2.1.1
xfTermOutputPowerAdminStatusThis object sets the output mode of the terminal. Legal values are: - other(1) - rtpc(2) - atpc(3) - localControl(4) - ra1LocalControlRa2Rtpc(5) - ra1RtpcRa2LocalControl(6) Note, It is only possible to select atpc if xfTermAtpcCapability = supportsAtpc for both near end and far end terminal. Value other(1) not settable. Default value: rtpc(2)rw
TermOutputPowerStatus
.1.3.6.1.4.1.193.81.3.4.1.1.2.1.2
xfTermAtpcCapabilityThis object shows the ATPC capability for the terminal, calculated as worst case capability for all units contained in the terminal.ro
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.2.1.3
xfRLPtpTerminalPerformanceTableTable for performance data. For 1+0 systems performance data is calculated according to ITU-T Rec. G.826. For 1+1 systems - calculated as the combined performance of the protected terminal. 1+0 terminals uses ifindex for RAU IF 1+1 terminals uses ifindex for SWITCH IF
SEQUENCE OF XfRLPtpTerminalPerformanceEntry
.1.3.6.1.4.1.193.81.3.4.1.1.4
xfRLPtpTerminalPerformanceEntryAn entry in the xfRLPtpTerminalPerformanceTable
XfRLPtpTerminalPerformanceEntry
.1.3.6.1.4.1.193.81.3.4.1.1.4.1
xfTermTimeElapsedThe number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.4.1.1
xfTermCurrentESThis object shows the error seconds.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.4.1.2
xfTermCurrentSESThis object shows the severely error seconds.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.4.1.3
xfTermCurrentBBEThis object shows the background block errors.ro
Counter64
.1.3.6.1.4.1.193.81.3.4.1.1.4.1.4
xfTermCurrentUASThis object shows the unavailable seconds (or unavailable time).ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.4.1.5
xfTermCurrentBBThis object shows the background blocks.ro
Counter64
.1.3.6.1.4.1.193.81.3.4.1.1.4.1.6
xfTermPerfResetThis object is used to reset the performance counters. It is settable also when the radio unit isn't present. Near end access: read-write Far end access: read-write (Traffic Node only)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.4.1.7
xfTermTimeElapsedEnRLBExtThe number of seconds that have elapsed in Enhanced RLB Extended capacity mode since RLB was enabled and the beginning of the current measurement period.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.4.1.8
xfRLProtectionTableTable for control and supervision of the protection mechanism
SEQUENCE OF XfRLProtectionEntry
.1.3.6.1.4.1.193.81.3.4.1.1.5
xfRLProtectionEntryAn entry in the xfRLProtectionTable
XfRLProtectionEntry
.1.3.6.1.4.1.193.81.3.4.1.1.5.1
xfRLProtectionModeThis is the operational status of the protection mode. Default: unprotected(2)ro
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.5.1.1
xfRLProtectionRau1entPhysicalIndex for RAU 1.ro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.5.1.2
xfRLProtectionRau2entPhysicalIndex for RAU 2.ro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.5.1.3
xfRLActiveTxRadioActive radio setting. Default value: txRadio1(1)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.5.1.4
xfRLSwitchOverResetReset of the activated external alarms Tx Switch Over and Remote Tx Switch Over by resetting internal alarms.rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.5.1.5
xfRLSwitchRevertiveTxPreferred Tx Radio. Default value: off(3) Near end access: read-write Far end access: read-only (Traffic Node only)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.5.1.6
xfRLProtectionCapabilityThis object shows the protection capabilities of the traffic node. Near end access: read-only Far end access: read-onlyro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.5.1.7
xfRLTxSwitchOverConfigurationIndicates whether the remote Tx switching function and Tx switchover alarm are enabled. When disabled, the remote Tx switching function is disabled and Tx switchover alarm is never raised and xfRLSwitchOverReset is never needed to reset these alarms. - Other (1) - Disabled (2) (default) - Enabled (3) Near end access: read-write Far end access: read-writerw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.5.1.8
xfRLLineProtectionTableTable for line protection status.
SEQUENCE OF XfRLLineProtectionEntry
.1.3.6.1.4.1.193.81.3.4.1.1.6
xfRLLineProtectionEntryAn entry in the xfRLLineProtectionTable
XfRLLineProtectionEntry
.1.3.6.1.4.1.193.81.3.4.1.1.6.1
xfRLLineProtectionStatusExtension to xfLineProtectionStatus.ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.6.1.1
xfRLLineProtectionModeOperational status of the line protection for a terminal physical line interface, e.g. MMU2 E and MMU2 F. Administrative status is xfTermLineProtection.ro
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.6.1.2
xfRADIORSTableTraffic node extension of ifTable. The tabled is indexed with ifIndex.
SEQUENCE OF XfRADIORSEntry
.1.3.6.1.4.1.193.81.3.4.1.1.7
xfRADIORSEntryAn entry in the xfRADIORSTable
XfRADIORSEntry
.1.3.6.1.4.1.193.81.3.4.1.1.7.1
xfRADIORSAlarmsThis object shows rau rs related alarms.ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.7.1.1
xfRADIORSPerformanceTableTraffic node extension of ifTable. The tabled is indexed with ifIndex.
SEQUENCE OF XfRADIORSPerformanceEntry
.1.3.6.1.4.1.193.81.3.4.1.1.8
xfRADIORSPerformanceEntryAn entry in the xfRADIORSPerformanceTable
XfRADIORSPerformanceEntry
.1.3.6.1.4.1.193.81.3.4.1.1.8.1
xfRADIORSPerformanceAlarmsThis object shows RAU RS related alarms.ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.8.1.1
xfRLPMConfigTableThis table contains the alarm threshold values for RL PM
SEQUENCE OF XfRLPMConfigEntry
.1.3.6.1.4.1.193.81.3.4.1.1.9
xfRLPMConfigEntryEntry in the xfRLPMConfigTable.
XfRLPMConfigEntry
.1.3.6.1.4.1.193.81.3.4.1.1.9.1
xfPMSetThreshold15mESsThe 15 minute set threshold for ES. Default value is 180. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.1
xfPMSetThreshold15mSESsThe 15 minute set threshold for SES. Default value is 15. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.2
xfPMSetThreshold15mBBEsThe 15 minute set threshold for BBE. Default value is 9900. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.3
xfPMResetThreshold15mESsThe 15 minute reset threshold for ES. Default value is 20. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.4
xfPMResetThreshold15mSESsThe 15 minute reset threshold for SES. Default value is 1. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.5
xfPMResetThreshold15mBBEsThe 15 minute reset threshold for BBE. Default value is 200. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.6
xfPMSetThreshold24hESsThe 24 hours set threshold for ES. Default value is 1500. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.7
xfPMSetThreshold24hSESsThe 24 hours set threshold for SES. Default value is 20. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.8
xfPMSetThreshold24hBBEsThe 24 hours set threshold for BBE. Default value is 48000. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.9
xfPMViewEnable/disable visibility of PM tables. Default value: pmEnable(1) Near end access: read-write Far end access: No accessrw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.10
xfPMStatusThreshold alarm status. Values from rlts1Counter15m0(21) to tltmCounter24h2(50) are related to obsoleted MOs.ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.11
xfPMRLTS1ThresholdRLTS1 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.9 ... -20.1 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always less than RLTS2, xfPMRLTS2Threshold.rw
Integer32 (-999..-201)
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.12
xfPMSetThreshold15mRLTS1Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater than alarm Reset, xfPMResetThreshold15mRLTS1.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.13
xfPMResetThreshold15mRLTS1Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less than alarm Set, xfPMSetThreshold15mRLTS1.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.14
xfPMRLTS2ThresholdRLTS2 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.8 ... -20.0 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always greater than RLTS1, xfPMRLTS1Threshold.rw
Integer32 (-998..-200)
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.15
xfPMSetThreshold15mRLTS2Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTS2.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.16
xfPMResetThreshold15mRLTS2Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less or equal to alarm Set, xfPMSetThreshold15mRLTS2.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.17
xfPMSetThreshold15mRLTMReceive Level Tide Mark (RLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Input Power in current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTM.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.18
xfPMResetThreshold15mRLTMReceive Level Tide Mark (RLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Input Power for entire current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always less or equal to alarm Set, xfPMSetThreshold15mRLTM.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.19
xfPMTLTS1ThresholdTLTS1 Alarm Threshold for Maximum RF Output Power. RF output level = value dBm. Domain: [-100 ... 45 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset.rw
Integer32 (-100..45)
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.20
xfPMSetThreshold15mTLTS1Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 15 minute interval. Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTS1.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.21
xfPMResetThreshold15mTLTS1Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power for entire current 15 minute interval. Always less or equal to alarm Set, xfPMSetThreshold15mTLTS1.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.22
xfPMSetThreshold15mTLTMTransmitted Level Tide Mark (TLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Output Power in current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTM.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.23
xfPMResetThreshold15mTLTMTransmitted Level Tide Mark (TLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Output Power for entire current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always less or equal to alarm Set, xfPMSetThreshold15mTLTM.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.24
xfPMSetThreshold24hRLTS1Received Level 1 Threshold Second (RLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 24 hour interval.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.25
xfPMSetThreshold24hRLTS2Received Level 2 Threshold Second (RLTS2) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 24 hour interval.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.26
xfPMSetThreshold24hRLTMReceive Level Tide Mark (RLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Input Power in current 24 hour interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB]rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.27
xfPMSetThreshold24hTLTS1Transmitted Levels 1 Threshold Second (TLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 24 hour interval.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.28
xfPMSetThreshold24hTLTMTransmitted Level Tide Mark (TLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Output Power in current 24 hour interval. RF output level = value dB. Domain: [1 ... 145 dB]rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.9.1.29
xfRLPMCurrent24hTableTBD
SEQUENCE OF XfRLPMCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.10
xfRLPMCurrent24hEntryEntry in the xfRLPMCurrent24hTable.
XfRLPMCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.10.1
xfPMCurrent24hTimeElapsedThe number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.1
xfPMCurrent24hESsErrored Seconds in the current 24-hour interval.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.2
xfPMCurrent24hSESsSeverely Errored Seconds in the current 24-hour interval.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.3
xfPMCurrent24hBBEsBackground Block Errors in the current 24 hour intervalro
HCPerfCurrentCount (HC-PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.4
xfPMCurrent24hUASsUnavailable seconds (or Unavailable Time) in the current 24 hour interval.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.5
xfPMCurrent24hBBsThe number of Background Blocks in the current 24 hour interval.ro
HCPerfCurrentCount (HC-PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.6
xfPMCurrent24hRLTS1Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..86400|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.7
xfPMCurrent24hRLTS2Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..86400|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.8
xfPMCurrent24hRLMinIndicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.9
xfPMCurrent24hRLMaxIndicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.10
xfPMCurrent24hTLTS1Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..86400|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.11
xfPMCurrent24hTLMinIndicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.12
xfPMCurrent24hTLMaxIndicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.13
xfPMCurrent24hMSEMinIndicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.14
xfPMCurrent24hMSEMaxIndicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.15
xfPMCurrent24hXPIMinIndicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.16
xfPMCurrent24hXPIMaxIndicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.17
xfPMCurrent24hESRError Seconds Ratio in the current 24-hour intervalro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.18
xfPMCurrent24hSESRSeverely Error Seconds Ratio in the current 24-hour intervalro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.19
xfPMCurrent24hBBERBackground Block Errors Ratio in the current 24-hour intervalro
HCPerfCurrentCount (HC-PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.10.1.20
xfRLPMInterval24hTableTBD
SEQUENCE OF XfRLPMInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.11
xfRLPMInterval24hEntryEntry in the xfRLPMInterval24hTable.
XfRLPMInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.11.1
xfPMInterval24hESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the previous 24-hour interval.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.1
xfPMInterval24hSESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the previous 24-hour interval.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.2
xfPMInterval24hBBEsThe counter associated with the number of Coding Violations (Errored Blocks) encountered by a SONET/SDH Section in the previous 24-hour interval.ro
HCPerfCurrentCount (HC-PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.3
xfPMInterval24hUASsThe number of UnAvailable Seconds encountered by a SONET/SDH Section in the previous 24 hour interval.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.4
xfPMInterval24hBBsThe number of Background Blocks in a SONET/SDH Section in the previous 24 hour interval.ro
HCPerfCurrentCount (HC-PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.5
xfPMInterval24hValidDataThis variable indicates whether the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.6
xfPMInterval24hRLTS1Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the previous 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..86400|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.7
xfPMInterval24hRLTS2Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the previous 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..86400|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.8
xfPMInterval24hRLMinIndicate Min RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.9
xfPMInterval24hRLMaxIndicate Max RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.10
xfPMInterval24hTLTS1Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the previous 24 hour interval -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..86400|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.11
xfPMInterval24hTLMinIndicate Min RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.12
xfPMInterval24hTLMaxIndicate Max RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.13
xfPMInterval24hMSEMinIndicate Min MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.14
xfPMInterval24hMSEMaxIndicate Max MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.15
xfPMInterval24hXPIMinIndicate Min Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.16
xfPMInterval24hXPIMaxIndicate Max Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.11.1.17
xfRLPMCurrent15mTableTBD
SEQUENCE OF XfRLPMCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.12
xfRLPMCurrent15mEntryEntry in the table.
XfRLPMCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.12.1
xfPMCurrent15mElapsedTimeThe number of seconds that have elapsed since the beginning of the current error-measurement period.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.1
xfPMCurrent15mESsError seconds in the current 15 minute interval.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.2
xfPMCurrent15mSESsSeverely error seconds in the current 15 minute interval.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.3
xfPMCurrent15mBBEsBackground Block Errors in the current 15 minute interval.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.4
xfPMCurrent15mUASsUnavailable seconds (or Unavailable Time) in the current 15 minute interval.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.5
xfPMCurrent15mBBsThe number of Background Blocks encountered by a SONET/SDH Section in the current 15 minute interval.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.6
xfPMCurrent15mRLTS1Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..900|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.7
xfPMCurrent15mRLTS2Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..900|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.8
xfPMCurrent15mRLMinIndicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.9
xfPMCurrent15mRLMaxIndicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.10
xfPMCurrent15mTLTS1Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..900|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.11
xfPMCurrent15mTLMinIndicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.12
xfPMCurrent15mTLMaxIndicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.13
xfPMCurrent15mMSEMinIndicate Min MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.14
xfPMCurrent15mMSEMaxIndicate Max MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.15
xfPMCurrent15mXPIMinIndicate Min Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.16
xfPMCurrent15mXPIMaxIndicate Max Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.17
xfPMCurrent15mESRError Seconds Ratio in the current 15 minute intervalro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.18
xfPMCurrent15mSESRSeverely Error Seconds Ratio in the current 15 minute intervalro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.19
xfPMCurrent15mBBERBackground Block Errors Ratio in the current 15 minute intervalro
HCPerfCurrentCount (HC-PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.12.1.20
xfRLPMInterval15mTableTBD
SEQUENCE OF XfRLPMInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.13
xfRLPMInterval15mEntryEntry in the table.
XfRLPMInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.13.1
xfPMInterval15mIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.ro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.1
xfPMInterval15mESsError seconds in the xfPMInterval15mIntervalNumber 15 minute intervalro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.2
xfPMInterval15mSESsSeverely error seconds in the xfPDHCompInterval15mIntervalNumber 15 minute interval.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.3
xfPMInterval15mBBEsBackground Block Errors in the xfPDHCompInterval15mIntervalNumber 15 minute intervall.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.4
xfPMInterval15mUASsUnAvailable Seconds in the xfPDHCompInterval15mIntervalNumber 15 minute interval.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.5
xfPMInterval15mBBsBackground blocks in the xfPDHCompInterval15mIntervalNumber 15 minute interval.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.6
xfPMInterval15mValidDataThis variable indicates if the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.7
xfPMInterval15mRLTS1Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the previous 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..900|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.8
xfPMInterval15mRLTS2Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the previous 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..900|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.9
xfPMInterval15mRLMinIndicate Min RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.10
xfPMInterval15mRLMaxIndicate Max RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.11
xfPMInterval15mTLTS1Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the previous 15 minute interval -1 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (0..900|-1)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.12
xfPMInterval15mTLMinIndicate Min RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.13
xfPMInterval15mTLMaxIndicate Max RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.14
xfPMInterval15mMSEMinIndicate Min MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.15
xfPMInterval15mMSEMaxIndicate Max MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.16
xfPMInterval15mXPIMinIndicate Min Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.17
xfPMInterval15mXPIMaxIndicate Max Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.13.1.18
xfRLPtpTerminalXTableExtension table to xfRLPtpTerminalTable. The table is indexed with entLogicalIndex.
SEQUENCE OF XfRLPtpTerminalXEntry
.1.3.6.1.4.1.193.81.3.4.1.1.14
xfRLPtpTerminalXEntryEntry in the table
XfRLPtpTerminalXEntry
.1.3.6.1.4.1.193.81.3.4.1.1.14.1
xfTermInterfacesInterface constellation for the terminalrw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.1
xfTermInterfacesCapabilityInterface constellation capability for the terminalro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.2
xfTermChannelModeOperStatusChannel mode for the terminal (operational status). - ccdp(2): Co-Channel Dual Polarization (XPIC) - accp(3): Adjacent Channels Co-Polarization (non-XPIC) - acap(4): Adjacent Channels Alternate Polarization (non-XPIC)ro
ChannelMode
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.3
xfTermXPICRestoreRestore XPICrw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.4
xfTermTribCapacityActualActual tributary capacityro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.5
xfTermTribCapacityDesiredDesired tributary capacityrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.6
xfTermBitPipeCapacityBit pipe capacity, Kbpsro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.7
xfTermRowIndexPoints to a row in xfRlPtpTerminalCapabilityTablerw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.8
xfTermCapabilitiesLastChangeThe value of sysUpTime at the time of the last creation or deletion of an entry in the xfRLPtpTerminalCapabilityTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.9
xfTermActualRowIndexThe actual row that is pointed out in xfRlPtpTerminalCapabilityTablero
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.10
xfTermMaxRowIndexPoints to a row in xfRlPtpTerminalCapabilityTable where the maximum capacity is, including licenserw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.11
xfTermAdaptiveManualRowIndexManual row indexrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.12
xfTermAdaptiveManualModeAdaptive manual mode - other(1) - disable(2)(default) - enable(3) - enabledAsRequest(4)rw
TermAdaptiveManualMode
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.13
xfTermSpectrumEfficiencyClassSpectrum Efficiency Class: - other(1): unknown - sec2(2): spectrum eff. Class 2 - sec3(3): spectrum eff. Class 3 - sec4L(4): spectrum eff. Class 4L - sec4H(5): specturm eff. Class 4H - sec5A(6): spectrum eff. Class 5A - sec5B(7): spectrum eff. Class 5B - sec6A(8): spectrum eff. Class 6A - sec6B(9): spectrum eff. Class 6B Near end access: read-write Far end access: read-write (Traffic Node), read-only (other)rw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.14
xfTermSpectrumEfficiencyClassCapabilitySpectrum Efficiency Class Capability - 0 Sec2 Spectrum eff. Class 2 - 1 Sec3 Specturm eff. Class 3 - 2 Sec4L Specturm eff. Class 4L - 3 Sec4H Spectrum eff. Class 4H - 4 Sec5A Spectrum eff. Class 5A - 5 Sec5B Spectrum eff. Class 5B - 6 Sec6A Spectrum eff. Class 6A - 7 Sec6B Spectrum eff. Class 6Bro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.15
xfTermIpAddressLAN ip addressro
IpAddress
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.16
xfTermProtectionCapabilityTerminal protection capability - 0 Unprotected ............... The terminal supports 1+0 - 1 protectedHotStandby ....... The terminal supports 1+1 Hot Standby - 2 protectedWorkingStandby ... The terminal supports 1+1 Working Standby - 3 unprotectedSD ............. The terminal supports 1+0 with Space diversity - 4 nplus1 .................... The terminal supports N+1 protection (through RPS board) - 5 enhancedRLB ............... The terminal supports Enhanced Radio Link Bondingro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.17
xfTermLineProtectionCapabilityTerminal Line protection capability - 0 unprotected ................. - 1 singleInterfaceLowSlot ...... - 2 singleInterfaceHighSlot ..... - 3 opticalSplitter ............. - 4 equipmentAndLineProtection ..ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.18
xfTermTribAllocationActualActual tributary allocation in a MMU2 D or MMU2 H, the rest is packet linkro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.19
xfTermTribAllocationDesiredDesired tibutary allocation in a MMU2 D or MMU2 H, the rest is packet linkrw
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.20
xfTermAutoRemoveLoopEnableAuto Remove Loops - other(1) - enable(2) (default) - disable(3)rw
TermAutoRemoveLoopEnable
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.21
xfTermCapabilityTerminal capabilityro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.22
xfTermCapacityLicenseLicensetablerw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.23
xfTermFadingRatesFading rates - other(1): unknown - fr50(2): 50dB/s HighTroughputMode (default) - fr150(3): 100dB/s HighFadingResistanceModerw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.24
xfTermFadingRatesCapabilityFading rate capability - fr50(0): HighTroughputMode - fr100(1): HighFadingResistanceModero
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.25
xfTermConfiguredBitPipeCapacityConfigured bit pipe capacity, Kbpsro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.26
xfTermTribCapacityConfiguredConfigured tributary capacityro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.27
xfTermPacketMaxCapacityPacket Max Capacityro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.28
xfTermPacketMinCapacityPacket Min Capacityro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.14.1.29
xfRlPtpTerminalCapabilityTableTable for misc. capability informatio.
SEQUENCE OF XfRlPtpTerminalCapabilityEntry
.1.3.6.1.4.1.193.81.3.4.1.1.15
xfRlPtpTerminalCapabilityEntryEntry in the table
XfRlPtpTerminalCapabilityEntry
.1.3.6.1.4.1.193.81.3.4.1.1.15.1
xfTermChannelSpacingChannel spacing - ETSI: 3.5, 7, 14, 28, 40, 56 MHz - ANSI: 10, 20, 30, 40, 50, 60 MHzro
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.1
xfTermChannelModulationChannel modulation - cqpsk(2) CQPSK - qam16(3) 16-QAM - qam128(4) 128-QAM - qam32(5) 32-QAM - qam64(6) 64-QAM - qam4(7) 4-QAM - qam8(8) 8-QAM - qam256(9) 256-QAM - qam512(10) 512-QAM - qam1024(11) 1024-QAMro
TermModulation
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.2
xfTermMaxTribCapacityMax number of tributariesro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.3
xfTermDCNCapacityDCN hop capacityro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.4
xfTermValidRowMax capacity license - vr0(0) = invalid row - vr10(1) = 10 Mbps, no license - vr25(2) = 25 Mbps - vr50(3) = 50 Mbps - vr100(4) = 100 Mbps - vr15(5) = 15 Mbps - vr30(6) = 30 Mbps - vr60(7) = 60 Mbps - vr125(8) = 125 Mbps - vr200(9) = 200 Mbps - vr350(10) = 350 Mbps - vr4(11) = 4 Mbps, no license - vr500(12) = 500 Mbps - vr150(13) = 150 Mbps - vr250(14) = 250 Mbps - vr300(15) = 300 Mbps - vr400(16) = 400 Mbps - vr450(17) = 450 Mbpsro
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.5
xfTermMaxCapacityMax capacityro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.6
xfTermSpectrumEfficiencyClassObsoletexfTermSpectrumEfficiencyClassObsoleteroobsolete
TermRauSec
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.7
xfTermFrameFormatTypeFrame format type - fftOther(0) - fftStatic(1) - fftAdmod(2) - fftXpic(3) - fftXpicAdmod(4) - fftLegacy(5) - fftStaticLH(6) - fftAdmodLH(7) - fftXpicLH(8) - fftXpicAdmodLH(9) - fftAdmodStatic(10) - fftXpicAdmodStatic(11) - fftAdmodStaticLH(12) - fftXpicAdmodStaticLH(13)ro
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.8
xfTermFrameFormatRevFrame format revisionro
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.9
xfTermBerAlarmThresholdCapabilityList of the allowed BER thresholdsro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.15.1.10
xfRLPMAMConfigTableAlarm threshold values for RL PM
SEQUENCE OF XfRLPMAMConfigEntry
.1.3.6.1.4.1.193.81.3.4.1.1.16
xfRLPMAMConfigEntryEntry in the xfRLPMAMConfigTable
XfRLPMAMConfigEntry
.1.3.6.1.4.1.193.81.3.4.1.1.16.1
xfPMAMSetThreshold15mThe 15 minute set threshold for AdMod. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.16.1.1
xfPMAMSetThreshold24hThe 24 hour set threshold for AdMod. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.16.1.2
xfPMAMResetThreshold15mThe 15 minute reset threshold for AdMod. Near end access: read-write Far end access: No accessrw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.16.1.3
xfPMAMStatusThreshold alarm statusro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.16.1.4
xfPMAMValidDataIt reports which modulation's PM data that are valid.ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.16.1.5
xfRLPMAMCurrent24hTableTBD
SEQUENCE OF XfRLPMAMCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.17
xfRLPMAMCurrent24hEntryEntry in the xfRLPMAMCurrent24hTable.
XfRLPMAMCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.17.1
xfPMAMCurrent24h4QAMValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.1
xfPMAMCurrent24h8QAMValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.2
xfPMAMCurrent24h16QAMValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.3
xfPMAMCurrent24h32QAMValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.4
xfPMAMCurrent24h64QAMValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.5
xfPMAMCurrent24h128QAMValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.6
xfPMAMCurrent24h256QAMValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.7
xfPMAMCurrent24h512QAMValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.8
xfPMAMCurrent24h1024QAMValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.9
xfPMAMCurrent24h4QAMEnRLBValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.10
xfPMAMCurrent24h8QAMEnRLBValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.11
xfPMAMCurrent24h16QAMEnRLBValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.12
xfPMAMCurrent24h32QAMEnRLBValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.13
xfPMAMCurrent24h64QAMEnRLBValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.14
xfPMAMCurrent24h128QAMEnRLBValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.15
xfPMAMCurrent24h256QAMEnRLBValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.16
xfPMAMCurrent24h512QAMEnRLBValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.17
xfPMAMCurrent24h1024QAMEnRLBValid time since resetro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.17.1.18
xfRLPMAMInterval24hTableTBD
SEQUENCE OF XfRLPMAMInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.18
xfRLPMAMInterval24hEntryEntry in the xfRLPMAMInterval24hTable.
XfRLPMAMInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.18.1
xfPMAMInterval24h4QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.1
xfPMAMInterval24h8QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.2
xfPMAMInterval24h16QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.3
xfPMAMInterval24h32QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.4
xfPMAMInterval24h64QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.5
xfPMAMInterval24h128QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.6
xfPMAMInterval24h256QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.7
xfPMAMInterval24h512QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.8
xfPMAMInterval24hValidDataThis variable indicates whether the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.9
xfPMAMInterval24h1024QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.10
xfPMAMInterval24h4QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.11
xfPMAMInterval24h8QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.12
xfPMAMInterval24h16QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.13
xfPMAMInterval24h32QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.14
xfPMAMInterval24h64QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.15
xfPMAMInterval24h128QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.16
xfPMAMInterval24h256QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.17
xfPMAMInterval24h512QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.18
xfPMAMInterval24h1024QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.18.1.19
xfRLPMAMCurrent15mTableTBD
SEQUENCE OF XfRLPMAMCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.19
xfRLPMAMCurrent15mEntryEntry in the table.
XfRLPMAMCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.19.1
xfPMAMCurrent15m4QAMValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.1
xfPMAMCurrent15m8QAMValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.2
xfPMAMCurrent15m16QAMValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.3
xfPMAMCurrent15m32QAMValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.4
xfPMAMCurrent15m64QAMValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.5
xfPMAMCurrent15m128QAMValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.6
xfPMAMCurrent15m256QAMValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.7
xfPMAMCurrent15m512QAMValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.8
xfPMAMCurrent15m1024QAMValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.9
xfPMAMCurrent15m4QAMEnRLBValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.10
xfPMAMCurrent15m8QAMEnRLBValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.11
xfPMAMCurrent15m16QAMEnRLBValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.12
xfPMAMCurrent15m32QAMEnRLBValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.13
xfPMAMCurrent15m64QAMEnRLBValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.14
xfPMAMCurrent15m128QAMEnRLBValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.15
xfPMAMCurrent15m256QAMEnRLBValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.16
xfPMAMCurrent15m512QAMEnRLBValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.17
xfPMAMCurrent15m1024QAMEnRLBValid interval time since reset.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.19.1.18
xfRLPMAMInterval15mTableTBD
SEQUENCE OF XfRLPMAMInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.20
xfRLPMAMInterval15mEntryEntry in the table.
XfRLPMAMInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.20.1
xfPMAMInterval15mIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.ro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.1
xfPMAMInterval15m4QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.2
xfPMAMInterval15m8QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.3
xfPMAMInterval15m16QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.4
xfPMAMInterval15m32QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.5
xfPMAMInterval15m64QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.6
xfPMAMInterval15m128QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.7
xfPMAMInterval15m256QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.8
xfPMAMInterval15m512QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.9
xfPMAMInterval15mValidDataThis variable indicates whether the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.10
xfPMAMInterval15m1024QAMInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.11
xfPMAMInterval15m4QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.12
xfPMAMInterval15m8QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.13
xfPMAMInterval15m16QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.14
xfPMAMInterval15m32QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.15
xfPMAMInterval15m64QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.16
xfPMAMInterval15m128QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.17
xfPMAMInterval15m256QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.18
xfPMAMInterval15m512QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.19
xfPMAMInterval15m1024QAMEnRLBInterval count.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.20.1.20
xfRLPtpTerminalCapacityLicenseTableTBD
SEQUENCE OF XfRLPtpTerminalCapacityLicenseEntry
.1.3.6.1.4.1.193.81.3.4.1.1.21
xfRLPtpTerminalCapacityLicenseEntryEntry in the table.
XfRLPtpTerminalCapacityLicenseEntry
.1.3.6.1.4.1.193.81.3.4.1.1.21.1
xfTermCapacityLicenseRangexfTermCapacityLicenseRangero
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.21.1.1
xfTermMaxCapacityRangeTermMaxCapacityRangero
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.21.1.2
xfTermMaxTribCapacityRangexfTermMaxTribCapacityRangero
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.21.1.3
xfRLPMSDCGainCurrent15mTableThis table monitors the time spent in each SDC gain value in the current 15 minute period.
SEQUENCE OF XfRLPMSDCGainCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.22
xfRLPMSDCGainCurrent15mEntryEntry in xfRLPMSDCGainCurrent15mTable.
XfRLPMSDCGainCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.22.1
xfPMSDCGainCurrent15m0005dBThe number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.22.1.1
xfPMSDCGainCurrent15m0510dBThe number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.22.1.2
xfPMSDCGainCurrent15m1015dBThe number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.22.1.3
xfPMSDCGainCurrent15m1520dBThe number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.22.1.4
xfPMSDCGainCurrent15m2025dBThe number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.22.1.5
xfPMSDCGainCurrent15m2530dBThe number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.22.1.6
xfRLPMSDCGainInterval15mTableThis table collects the time spent in each SDC gain value for the 15 minute intervals.
SEQUENCE OF XfRLPMSDCGainInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.23
xfRLPMSDCGainInterval15mEntryEntry in xfRLPMSDCGainInterval15mTable.
XfRLPMSDCGainInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.23.1
xfPMSDCGainInterval15mIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.ro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.23.1.1
xfPMSDCGainInterval15m0005dBThe number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.23.1.2
xfPMSDCGainInterval15m0510dBThe number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.23.1.3
xfPMSDCGainInterval15m1015dBThe number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.23.1.4
xfPMSDCGainInterval15m1520dBThe number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.23.1.5
xfPMSDCGainInterval15m2025dBThe number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.23.1.6
xfPMSDCGainInterval15m2530dBThe number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.23.1.7
xfRLPMSDCGainCurrent24hTableThis table monitors the time spent in each SDC gain value in the current 24 hours period.
SEQUENCE OF XfRLPMSDCGainCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.24
xfRLPMSDCGainCurrent24hEntryEntry in xfRLPMSDCGainCurrent24hTable.
XfRLPMSDCGainCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.24.1
xfPMSDCGainCurrent24h0005dBThe number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.24.1.1
xfPMSDCGainCurrent24h0510dBThe number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.24.1.2
xfPMSDCGainCurrent24h1015dBThe number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.24.1.3
xfPMSDCGainCurrent24h1520dBThe number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.24.1.4
xfPMSDCGainCurrent24h2025dBThe number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.24.1.5
xfPMSDCGainCurrent24h2530dBThe number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.ro
PerfCurrentCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.24.1.6
xfRLPMSDCGainInterval24hTableThis table collects the time spent in each SDC gain value for the 24 hours interval.
SEQUENCE OF XfRLPMSDCGainInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.25
xfRLPMSDCGainInterval24hEntryEntry in xfRLPMSDCGainInterval24hTable.
XfRLPMSDCGainInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.25.1
xfPMSDCGainInterval24h0005dBThe number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.25.1.1
xfPMSDCGainInterval24h0510dBThe number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.25.1.2
xfPMSDCGainInterval24h1015dBThe number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.25.1.3
xfPMSDCGainInterval24h1520dBThe number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.25.1.4
xfPMSDCGainInterval24h2025dBThe number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.25.1.5
xfPMSDCGainInterval24h2530dBThe number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.ro
PerfIntervalCount (PerfHist-TC-MIB)
.1.3.6.1.4.1.193.81.3.4.1.1.25.1.6
xfRLPMSDCGainConfigTablexfRLPMSDCGainConfigTable contains thresholds for setting and resetting alarms for SDC Gain PM data in SDC current and interval tables.
SEQUENCE OF XfRLPMSDCGainConfigEntry
.1.3.6.1.4.1.193.81.3.4.1.1.26
xfRLPMSDCGainConfigEntryEntry in xfRLPMSDCGainConfigTable.
XfRLPMSDCGainConfigEntry
.1.3.6.1.4.1.193.81.3.4.1.1.26.1
xfPMSDCGainSetThreshold15mThe 15 minute set threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 180.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.26.1.1
xfPMSDCGainSetThreshold24hThe 24 hour set threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 1500.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.26.1.2
xfPMSDCGainResetThreshold15mThe 15 minute reset threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 20.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.26.1.3
xfPMSDCGainStatusThreshold crossing SDC alarm status.ro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.26.1.4
xfRLExtRFPMConfigTableThis table contains the alarm threshold values for RL Extended RF PM. Its index id the RF IF ifIndex.
SEQUENCE OF XfRLExtRFPMConfigEntry
.1.3.6.1.4.1.193.81.3.4.1.1.27
xfRLExtRFPMConfigEntryEntry in the xfRLExtRFPMConfigTable.
XfRLExtRFPMConfigEntry
.1.3.6.1.4.1.193.81.3.4.1.1.27.1
xfExtRFPMRLTS1ThresholdRLTS1 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.9 ... -20.1 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always less than RLTS2, xfExtRFPMRLTS2Threshold.rw
Integer32 (-999..-201)
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.1
xfExtRFPMSetThreshold15mRLTS1Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater than alarm Reset, xfExtRFPMResetThreshold15mRLTS1.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.2
xfExtRFPMResetThreshold15mRLTS1Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less than alarm Set, xfPMSetThreshold15mRLTS1.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.3
xfExtRFPMRLTS2ThresholdRLTS2 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.8 ... -20.0 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always greater than RLTS1, xfExtRFPMRLTS1Threshold.rw
Integer32 (-998..-200)
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.4
xfExtRFPMSetThreshold15mRLTS2Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTS2.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.5
xfExtRFPMResetThreshold15mRLTS2Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTS2.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.6
xfExtRFPMSetThreshold15mRLTMReceive Level Tide Mark (RLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Input Power in current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTM.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.7
xfExtRFPMResetThreshold15mRLTMReceive Level Tide Mark (RLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Input Power for entire current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTM.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.8
xfExtRFPMTLTS1ThresholdTLTS1 Alarm Threshold for Maximum RF Output Power. RF output level = value dBm. Domain: [-100 ... 45 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset.rw
Integer32 (-100..45)
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.9
xfExtRFPMSetThreshold15mTLTS1Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 15 minute interval. Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTS1.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.10
xfExtRFPMResetThreshold15mTLTS1Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power for entire current 15 minute interval. Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTS1.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.11
xfExtRFPMSetThreshold15mTLTMTransmitted Level Tide Mark (TLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Output Power in current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTM.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.12
xfExtRFPMResetThreshold15mTLTMTransmitted Level Tide Mark (TLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Output Power for entire current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTM.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.13
xfExtRFPMSetThreshold24hRLTS1Received Level 1 Threshold Second (RLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 24 hour interval.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.14
xfExtRFPMSetThreshold24hRLTS2Received Level 2 Threshold Second (RLTS2) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 24 hour interval.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.15
xfExtRFPMSetThreshold24hRLTMReceive Level Tide Mark (RLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Input Power in current 24 hour interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB]rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.16
xfExtRFPMSetThreshold24hTLTS1Transmitted Levels 1 Threshold Second (TLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 24 hour interval.rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.17
xfExtRFPMSetThreshold24hTLTMTransmitted Level Tide Mark (TLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Output Power in current 24 hour interval. RF output level = value dB. Domain: [1 ... 145 dB]rw
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.18
xfExtRFPMStatusThreshold alarm statusro
Bits
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.19
xfExtRFPMViewEnable/disable visibility of PM tables. Default value: extPmEnable(1) Near end access: read-write Far end access: No accessrw
Enumeration
.1.3.6.1.4.1.193.81.3.4.1.1.27.1.20
xfRLExtRFPMCurrent24hTableCurrent 24h Extended RF PM table. Its index is RF IF ifIndex
SEQUENCE OF XfRLExtRFPMCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.28
xfRLExtRFPMCurrent24hEntryEntry in the xfRLExtRFPMCurrent24hTable.
XfRLExtRFPMCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.28.1
xfExtRFPMCurrent24hElapsedTimeThe number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.28.1.1
xfExtRFPMCurrent24hRLTS1Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..86400)
.1.3.6.1.4.1.193.81.3.4.1.1.28.1.2
xfExtRFPMCurrent24hRLTS2Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..86400)
.1.3.6.1.4.1.193.81.3.4.1.1.28.1.3
xfExtRFPMCurrent24hRLMinIndicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.28.1.4
xfExtRFPMCurrent24hRLMaxIndicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.28.1.5
xfExtRFPMCurrent24hTLTS1Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..86400)
.1.3.6.1.4.1.193.81.3.4.1.1.28.1.6
xfExtRFPMCurrent24hTLMinIndicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.28.1.7
xfExtRFPMCurrent24hTLMaxIndicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.28.1.8
xfRLExtRFPMInterval24hTableInterval 24h Extended RF PM table. Its index is RF IF ifIndex
SEQUENCE OF XfRLExtRFPMInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.29
xfRLExtRFPMInterval24hEntryEntry in the xfRLExtRFPMInterval24hTable.
XfRLExtRFPMInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.29.1
xfExtRFPMInterval24hRLTS1Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the previous 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..86400)
.1.3.6.1.4.1.193.81.3.4.1.1.29.1.1
xfExtRFPMInterval24hRLTS2Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the previous 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..86400)
.1.3.6.1.4.1.193.81.3.4.1.1.29.1.2
xfExtRFPMInterval24hRLMinIndicate Min RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.29.1.3
xfExtRFPMInterval24hRLMaxIndicate Max RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.29.1.4
xfExtRFPMInterval24hTLTS1Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the previous 24 hour interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..86400)
.1.3.6.1.4.1.193.81.3.4.1.1.29.1.5
xfExtRFPMInterval24hTLMinIndicate Min RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.29.1.6
xfExtRFPMInterval24hTLMaxIndicate Max RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.29.1.7
xfExtRFPMInterval24hValidDataThis variable indicates whether the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.193.81.3.4.1.1.29.1.8
xfRLExtRFPMCurrent15mTableCurrent 15m Extended RF PM table. Its index is RF IF ifIndex
SEQUENCE OF XfRLExtRFPMCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.30
xfRLExtRFPMCurrent15mEntryEntry in the table.
XfRLExtRFPMCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.30.1
xfExtRFPMCurrent15mElapsedTimeThe number of seconds that have elapsed since the beginning of the current error-measurement period.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.30.1.1
xfExtRFPMCurrent15mRLTS1Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..900)
.1.3.6.1.4.1.193.81.3.4.1.1.30.1.2
xfExtRFPMCurrent15mRLTS2Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..900)
.1.3.6.1.4.1.193.81.3.4.1.1.30.1.3
xfExtRFPMCurrent15mRLMinIndicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.30.1.4
xfExtRFPMCurrent15mRLMaxIndicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.30.1.5
xfExtRFPMCurrent15mTLTS1Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..900)
.1.3.6.1.4.1.193.81.3.4.1.1.30.1.6
xfExtRFPMCurrent15mTLMinIndicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.30.1.7
xfExtRFPMCurrent15mTLMaxIndicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.30.1.8
xfRLExtRFPMInterval15mTableInterval 15m Extended RF PM table. Its index is RF IF ifIndex
SEQUENCE OF XfRLExtRFPMInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.31
xfRLExtRFPMInterval15mEntryEntry in the table.
XfRLExtRFPMInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.31.1
xfExtRFPMInterval15mIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.ro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.31.1.1
xfExtRFPMInterval15mRLTS1Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the previous 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..900)
.1.3.6.1.4.1.193.81.3.4.1.1.31.1.2
xfExtRFPMInterval15mRLTS2Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the previous 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..900)
.1.3.6.1.4.1.193.81.3.4.1.1.31.1.3
xfExtRFPMInterval15mRLMinIndicate Min RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.31.1.4
xfExtRFPMInterval15mRLMaxIndicate Max RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-999..-200|0)
.1.3.6.1.4.1.193.81.3.4.1.1.31.1.5
xfExtRFPMInterval15mTLTS1Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the previous 15 minute interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1 | 0..900)
.1.3.6.1.4.1.193.81.3.4.1.1.31.1.6
xfExtRFPMInterval15mTLMinIndicate Min RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.31.1.7
xfExtRFPMInterval15mTLMaxIndicate Max RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-100..45|255)
.1.3.6.1.4.1.193.81.3.4.1.1.31.1.8
xfExtRFPMInterval15mValidDataThis variable indicates if the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.193.81.3.4.1.1.31.1.9
xfRLExtRAUPMCurrent24hTableCurrent 24h Extended RAU PM table. Its index is RAU IF ifIndex
SEQUENCE OF XfRLExtRAUPMCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.32
xfRLExtRAUPMCurrent24hEntryEntry in the xfRLExtRAUPMCurrent24hTable.
XfRLExtRAUPMCurrent24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.32.1
xfExtRAUPMCurrent24hElapsedTimeThe number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.32.1.1
xfExtRAUPMCurrent24hMSEMinIndicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.32.1.2
xfExtRAUPMCurrent24hMSEMaxIndicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.32.1.3
xfExtRAUPMCurrent24hXPIMinIndicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.32.1.4
xfExtRAUPMCurrent24hXPIMaxIndicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.32.1.5
xfRLExtRAUPMInterval24hTableInterval 24h Extended RAU PM table. Its index is RAU IF ifIndex
SEQUENCE OF XfRLExtRAUPMInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.33
xfRLExtRAUPMInterval24hEntryEntry in the xfRLExtRAUPMInterval24hTable.
XfRLExtRAUPMInterval24hEntry
.1.3.6.1.4.1.193.81.3.4.1.1.33.1
xfExtRAUPMInterval24hMSEMinIndicate Min MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.33.1.1
xfExtRAUPMInterval24hMSEMaxIndicate Max MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.33.1.2
xfExtRAUPMInterval24hXPIMinIndicate Min Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.33.1.3
xfExtRAUPMInterval24hXPIMaxIndicate Max Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.33.1.4
xfExtRAUPMInterval24hValidDataThis variable indicates whether the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.193.81.3.4.1.1.33.1.5
xfRLExtRAUPMCurrent15mTableCurrent 15m Extended RAU PM table. Its index is RF IF ifIndex
SEQUENCE OF XfRLExtRAUPMCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.34
xfRLExtRAUPMCurrent15mEntryEntry in the xfRLExtRAUPMCurrent15mTable.
XfRLExtRAUPMCurrent15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.34.1
xfExtRAUPMCurrent15mElapsedTimeThe number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value.ro
Counter32
.1.3.6.1.4.1.193.81.3.4.1.1.34.1.1
xfExtRAUPMCurrent15mMSEMinIndicate Min MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.34.1.2
xfExtRAUPMCurrent15mMSEMaxIndicate Max MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.34.1.3
xfExtRAUPMCurrent15mXPIMinIndicate Min Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.34.1.4
xfExtRAUPMCurrent15mXPIMaxIndicate Max Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.34.1.5
xfRLExtRAUPMInterval15mTableInterval 15 Extended RAU PM table. Its index is RAU IF ifIndex
SEQUENCE OF XfRLExtRAUPMInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.35
xfRLExtRAUPMInterval15mEntryEntry in the xfRLExtRAUPMInterval15mTable.
XfRLExtRAUPMInterval15mEntry
.1.3.6.1.4.1.193.81.3.4.1.1.35.1
xfExtRAUPMInterval15mIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.ro
Integer32
.1.3.6.1.4.1.193.81.3.4.1.1.35.1.1
xfExtRAUPMInterval15mMSEMinIndicate Min MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.35.1.2
xfExtRAUPMInterval15mMSEMaxIndicate Max MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.35.1.3
xfExtRAUPMInterval15mXPIMinIndicate Min Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.35.1.4
xfExtRAUPMInterval15mXPIMaxIndicate Max Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002ro
Integer32 (-1000..1000|2000)
.1.3.6.1.4.1.193.81.3.4.1.1.35.1.5
xfExtRAUPMInterval15mValidDataThis variable indicates whether the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.193.81.3.4.1.1.35.1.6
xfRadioLinkPtpTerminalConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.193.81.3.4.1.2
xfRadioLinkPtpTerminalCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.193.81.3.4.1.2.1
xfRadioLinkPtpTerminalFullComplianceThe compliance statement for SNMP entities which implement everything.
Unknown
.1.3.6.1.4.1.193.81.3.4.1.2.1.1
xfRadioLinkPtpTerminalGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.193.81.3.4.1.2.2
xfRadioLinkPtpTerminalCompleteGroupA collection of all current objects in this MIB module.
Unknown
.1.3.6.1.4.1.193.81.3.4.1.2.2.1
xfRadioLinkPtpTerminalObsoleteGroupA collection of all obsolete objects in this MIB module.obsolete
Unknown
.1.3.6.1.4.1.193.81.3.4.1.2.2.2
XF-RADIOLINK-PTP-TERMINAL-MIB - SNMP MIB Reference | MIBs Explorer