ERICSSON-ROUTER-ALARMIO-MIB
The ERICSSON-ROUTER-ALARMIO-MIB monitors physical external I/O connector states and alarm signal thresholds on Ericsson Spitfire series routers, tracking discrete input pin signals for trap generation and output pin status for critical or major alarm actuation.
Imported Objects
Objects
9 total| Object Name |
|---|
eriRouterAlarmioMibAlarmio is physical connector held external IOs. This module is product specific. It's only used in Spitfire series products. It holds some input pins(ports) and output pins(ports). The input ports are connected with other devices and used to accept signal from them. Alarms are trapped when signal detected. The output ports are connected with other devices and used to send out signal to them. When critical or major alarms are detected, signal will be sent out by these ports. Detailed usage is product specific. MODULE-IDENTITY .1.3.6.1.4.1.193.218.2.108 |
eriRouterAlarmioAlarmActiveTableA list of alarmio active alarm entries. SEQUENCE OF EriRouterAlarmioAlarmActiveEntry .1.3.6.1.4.1.193.218.2.108.1 |
eriRouterAlarmioAlarmActiveEntryA collection of alarmio active alarm info. EriRouterAlarmioAlarmActiveEntry .1.3.6.1.4.1.193.218.2.108.1.1 |
eriRouterAlarmioPortIdThe value of this object contains the alarmio's port id.ro Unsigned32 .1.3.6.1.4.1.193.218.2.108.1.1.1 |
eriRouterAlarmioAlarmActiveIndexThe value of this object uniquely identifies this alarmio entry.ro Unsigned32 .1.3.6.1.4.1.193.218.2.108.1.1.2 |
eriRouterAlarmioAlarmSeverityThe value of this object contains the alarmio alarm's severity.ro ItuPerceivedSeverity (ITU-ALARM-TC-MIB) .1.3.6.1.4.1.193.218.2.108.1.1.3 |
eriRouterAlarmioDescriptionThe value of this object contains the alarmio's description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.193.218.2.108.1.1.4 |
eriRouterAlarmioAlarmDateAndTimeThe value of this object contains the alarmio alarm's trigger time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.193.218.2.108.1.1.5 |
eriRouterAlarmioAlarmThis notification is triggered when a alarmio input alarm is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.193.218.2.108.2 |
More MIBs from Put the right things here
Browse all Put the right things hereMIBs →The XF-RADIOLINK-PTP-TERMINAL-MIB enables SNMP-based monitoring and management of point-to-point Radiolink terminal hardware, specifically exposing operational metrics such as link status, signal quality parameters, and interface statistics for terminal-level devices.
The XF-RADIOLINK-RLT-MIB provides SNMP management objects for monitoring Radio Link Terminals (RLT) and Carrier Terminations (CT) on Ericsson MINI-LINK TN radios, specifically enabling visibility into dual-carrier configuration states and operational parameters. This module facilitates the tracking of carrier-specific link metrics, including signal quality, error counters, and interface status for both primary and secondary carrier paths within the radio link application.
SNMP MIB module
Standard SNMP MIB module defining data structures for ANS-GS-MIB.
Standard SNMP MIB module defining data structures for ANS-MLBAS-MIB.
The XF-RADIOLINK-PTP-RADIO-MIB provides SNMP management objects for monitoring and configuring Point-to-Point (PTP) Radio Access Units (RAUs), specifically exposing performance metrics such as link status, signal strength, error counters, and interface statistics for Xirrus wireless infrastructure.