ENGENIUS-CLIENT-MIB
Imported Objects
Objects
20 total| Object Name |
|---|
engenius OBJECT IDENTIFIER .1.3.6.1.4.1.14125 |
engeniusmeshMIB Definition used in the EnGenius Mesh Product Line:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
engenius(14125).engeniusmesh(1) MODULE-IDENTITY .1.3.6.1.4.1.14125.1 |
nodeConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.14125.1.2 |
nodeConfigurationSignallevel OBJECT IDENTIFIER .1.3.6.1.4.1.14125.1.2.30 |
signallevelExecuteA command to execute the RSSI updatero Integer32 .1.3.6.1.4.1.14125.1.2.30.1 |
signallevelTableThis table contains the list of signal level between the node and its neighbour nodes. SEQUENCE OF SignallevelTableEntry .1.3.6.1.4.1.14125.1.2.30.2 |
signallevelTableEntryRepresent the entry in the Signal Level table. SignallevelTableEntry .1.3.6.1.4.1.14125.1.2.30.2.1 |
signallevelTableIndexSpecify the index of the node Signal Level table. Integer32 .1.3.6.1.4.1.14125.1.2.30.2.1.1 |
signallevelTableSourceThe source node's IP Addressro OCTET STRING .1.3.6.1.4.1.14125.1.2.30.2.1.2 |
signallevelTableDestinationThe destination node's IP Addressro OCTET STRING .1.3.6.1.4.1.14125.1.2.30.2.1.3 |
signallevelTableRssiThe singal level between the source node and destination node in RSSI.ro OCTET STRING .1.3.6.1.4.1.14125.1.2.30.2.1.4 |
clientInfoTableThis table contains the list of clients info of the nodes. SEQUENCE OF ClientInfoTableEntry .1.3.6.1.4.1.14125.1.2.30.3 |
clientInfoTableEntryRepresent the entry in the Client Info table. ClientInfoTableEntry .1.3.6.1.4.1.14125.1.2.30.3.1 |
clientInfoTableIndexSpecify the index of the node Client Info table. Integer32 .1.3.6.1.4.1.14125.1.2.30.3.1.1 |
clientInfoTableEssidThe ESSID of the APro OCTET STRING .1.3.6.1.4.1.14125.1.2.30.3.1.2 |
clientInfoTableMacThe MAC Address of the clientro OCTET STRING .1.3.6.1.4.1.14125.1.2.30.3.1.3 |
clientInfoTableChannelThe channel of the Clientro OCTET STRING .1.3.6.1.4.1.14125.1.2.30.3.1.4 |
clientInfoTableRateThe speed rate of the client in kbpsro OCTET STRING .1.3.6.1.4.1.14125.1.2.30.3.1.5 |
clientInfoTableRssiThe singal level between the client and node in RSSI.ro OCTET STRING .1.3.6.1.4.1.14125.1.2.30.3.1.6 |
clientInfoTableIdletimeThe idle timeout in second of the client.ro OCTET STRING .1.3.6.1.4.1.14125.1.2.30.3.1.7 |
More MIBs from Senao R&D Dept., S/W Division
Browse all Senao R&D Dept., S/W DivisionMIBs →SNMP MIB module
The ENGENIUS-STATUS-MIB provides Senao-specific metrics for monitoring IEEE 802.11 wireless interface states and operational parameters on Senao hardware, supplementing standard IEEE 802.11 MIB data with vendor-defined implementation details.
The ENGENIUS-PRIVATE-MIB extends standard IEEE 802.11 management capabilities on Senao (Engenius) wireless access points and bridges by exposing vendor-specific metrics for proprietary hardware states, radio parameters, and extended operational counters not covered in the standard MIB.
The SENAO-ENTERPRISE-INDOOR-AP-CB-MIB module provides vendor-specific extensions to standard IEEE 802.11 management for Senao indoor access points, enabling the monitoring of proprietary operational metrics and performance counters not covered by the base 802.11 MIB. This implementation-specific data facilitates granular troubleshooting and capacity planning for Senao's indoor wireless infrastructure by exposing device-level telemetry beyond standard protocol definitions.
The SENAO-EOR7550-MIB module extends IEEE 802.11 management capabilities to monitor vendor-specific performance metrics and operational states on Senao EOR7550 wireless access points. This implementation-specific supplement enables granular visibility into proprietary device behaviors and 802.11 parameters not covered by standard MIBs.
Standard SNMP MIB module defining data structures for SENAO-WLAN-AP-MIB.