SENAO-ENTERPRISE-INDOOR-AP-CB-MIB
AI MIB Summary
The SENAO-ENTERPRISE-INDOOR-AP-CB-MIB module provides vendor-specific extensions to standard IEEE 802.11 management for Senao indoor access points, enabling the monitoring of proprietary operational metrics and performance counters not covered by the base 802.11 MIB. This implementation-specific data facilitates granular troubleshooting and capacity planning for Senao's indoor wireless infrastructure by exposing device-level telemetry beyond standard protocol definitions.
The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.11 MIB proposed by IEEE.
Main OID:
senao.1.3.6.1.4.1.14125
109
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
109 total| Object Name |
|---|
senaoThe MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.11 MIB proposed by IEEE. MODULE-IDENTITY .1.3.6.1.4.1.14125 |
indoorWirelessDevice OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100 |
entSystem OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.1 |
entPasswordAdministration passwordrw DisplayString .1.3.6.1.4.1.14125.100.1.2 |
entSysModelSystem modelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.100.1.3 |
entSysModeSystem mode, 0:AP router, 1:Repeater, 2: AP bridge, 3: Client bridge, 4: Client router, 5: WDS bridgero Enumeration .1.3.6.1.4.1.14125.100.1.4 |
entSysUpTimeSystem uptimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14125.100.1.5 |
entHwVersionThe version of the hardwarero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.100.1.6 |
entSNSerial Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.100.1.7 |
entKenelVersionThe version of the kernelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.100.1.8 |
entAppVersionThe version of the system applicationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.100.1.9 |
entResetSetting this attribute TRUE causes the AP rebootedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.1.10 |
entResetToDefaultSetting this attribute TRUE will Reboot the system and change settings to factory defaultrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.1.11 |
entApplyModulesSetting this attribute TRUE will apply the changed modules to reloadrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.1.12 |
entLAN OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.2 |
entLANIPLAN IP addressrw IpAddress .1.3.6.1.4.1.14125.100.2.1 |
entLANSubnetMaskLAN subnet maskrw IpAddress .1.3.6.1.4.1.14125.100.2.2 |
entSTPEnableSet this attribute TRUE will enable 802.1d Spanning Tree.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.2.3 |
entDHCPEnableWhen system mode is not 1(Repeater) and 5(WDS bridge), set this attribute TRUE will enable the DHCP server function of devicerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.2.4 |
entIPPoolStartTWhen system mode is not 1(Repeater) and 5(WDS bridge), set the start address of DHCP IP poolrw IpAddress .1.3.6.1.4.1.14125.100.2.5 |
entIPPoolEndWhen system mode is not 1(Repeater) and 5(WDS bridge), set the end address of DHCP IP poolrw IpAddress .1.3.6.1.4.1.14125.100.2.6 |
entIPLeaseTimeWhen system mode is not 1(Repeater) and 5(WDS bridge), the time period client can have the IP address assigned by DHCP server 0(half hour), 1(one hour) 2(two hours), 3(half day), 4(one day), 5(two days), 6(one week), 7(two weeks), 8(forever)rw Enumeration .1.3.6.1.4.1.14125.100.2.7 |
entWAN OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.3 |
entRouterEnableOnly When op mode is 0(AP) or (Client bridge), can set this attribute. Set TRUE will enable the router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.3.1 |
entMacFilter OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.4 |
entLanMacFilteringEnableSet this attribute TRUE will enable the LAN MAC filteringrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.4.1 |
entLanMacFilteringModeThe mode of LAN MAC filtering can be 0(white list), 1(black list)rw Enumeration .1.3.6.1.4.1.14125.100.4.2 |
entLanMacFilterTableThis table provides one row for each LAN MAC filtering. Each row contains the enterprise LAN MAC filtering table for that LAN MAC filtering. SEQUENCE OF EntLanMacFilterEntry .1.3.6.1.4.1.14125.100.4.3 |
entLanMacFilterEntryAn entry in the entLanMacFilterTable. EntLanMacFilterEntry .1.3.6.1.4.1.14125.100.4.3.1 |
entMacAddressIndexThe auxiliary variable used to identify instances of columnar objects in the LAN MAC Filtering Tablero INTEGER .1.3.6.1.4.1.14125.100.4.3.1.1 |
entMacAddressMAC address list in the LAN MAC filtering tablero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.100.4.3.1.2 |
entMacFilteringValidThe validity status of each corresponding MAC address in LAN MAC filtering tablero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.4.3.1.3 |
entWlan OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.5 |
entWlanCommonInfo OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.5.1 |
entOpModeSet op mode: 0(AP), 1(Client bridge), 2(WDS bridge), 3(Repeater)rw Enumeration .1.3.6.1.4.1.14125.100.5.1.1 |
entRadioSet this attribute TRUE will enable the radiorw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.5.1.2 |
entAPModeOnly when op mode is 0(AP), we can set AP mode: 0(AP), 1(WDS)rw Enumeration .1.3.6.1.4.1.14125.100.5.1.3 |
entBandThe wireless mode: 0(802.11 b/g), 1(802.11 b), 2(802.11 a), 4(802.11 g), 6(802.11 n), 7(802.11 g/n), 8(802.11 a/n), 9(802.11 b/g/n)rw Enumeration .1.3.6.1.4.1.14125.100.5.1.4 |
entESSIDNumSet the Number of multiple ESSIDrw INTEGER .1.3.6.1.4.1.14125.100.5.1.5 |
entChannelThe current operating frequency channelrw INTEGER .1.3.6.1.4.1.14125.100.5.1.6 |
entDataRateThis attribute specifies the data rate at which the station may transmit data in Mbps 0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps), 18(18Mbps), 24(24Mbps), 36(36Mbps), 48(48Mbps), 54(54Mbps)rw Enumeration .1.3.6.1.4.1.14125.100.5.1.7 |
entNDataRateThis attribute specifies the 11n data raterw INTEGER .1.3.6.1.4.1.14125.100.5.1.8 |
entTxPowerThe transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%)rw INTEGER .1.3.6.1.4.1.14125.100.5.1.9 |
entBeaconIntervalThis attribute specifies the number of TU that a station shall use for scheduling Beacon transmissionsrw INTEGER .1.3.6.1.4.1.14125.100.5.1.10 |
entDTIMPeriodThis attribute specifies the number of beacon intervalsrw INTEGER .1.3.6.1.4.1.14125.100.5.1.11 |
entFragmentationThresholdThis attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHYrw INTEGER .1.3.6.1.4.1.14125.100.5.1.12 |
entRTSThresholdThis attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed.rw INTEGER .1.3.6.1.4.1.14125.100.5.1.13 |
entChannelBandwidthThis attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ)rw INTEGER .1.3.6.1.4.1.14125.100.5.1.14 |
entPreambleTypeThis attribute specifies the preamble type: 1(Short), 2(Long)rw Enumeration .1.3.6.1.4.1.14125.100.5.1.15 |
entCTSProtectionThis attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None)rw Enumeration .1.3.6.1.4.1.14125.100.5.1.16 |
entWlanESSIDInfoTableThis table provides one row for each ESSID information. Each row contains the enterprise ESSID information Table for that ESSID information. SEQUENCE OF EntWlanESSIDInfoEntry .1.3.6.1.4.1.14125.100.5.2 |
entWlanESSIDInfoEntryAn entry in the entWlanESSIDInfoTable. EntWlanESSIDInfoEntry .1.3.6.1.4.1.14125.100.5.2.1 |
entWlanESSIDInfoIndexThe auxiliary variable used to identify instances of columnar objects in the ESSID information Tablero INTEGER .1.3.6.1.4.1.14125.100.5.2.1.1 |
entESSIDThis attribute reflects the Service Set ID used in the Desired- SSID parameter of the most recent MLME_Scan.requestrw OCTET STRING .1.3.6.1.4.1.14125.100.5.2.1.2 |
entBroadcastESSIDSet this attribute TRUE will enable the hidden SSIDrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.5.2.1.3 |
entWMMSet this attribute TRUE will enable WMMrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.5.2.1.4 |
entEncryptionThe WLAN encryption: 0(none), 1(WEP), 2(TKIP), 3(AES), 4(TKIPAES)rw INTEGER .1.3.6.1.4.1.14125.100.5.2.1.5 |
entWlanAuthenticationTypeThe current authentication algorithms: 0 (openSystem), 1(wepAuto), 2(sharedKey), 3(WPAPSK), 4(WPA), 5(WPA2PSK), 6(WPA2), 7(WPA1WPA2), 8(WPA1PSKWPA2PSK)rw INTEGER .1.3.6.1.4.1.14125.100.5.2.1.6 |
entWlanWepInfoTableThis table provides one row for each WEP information. Each row contains the enterprise WEP information Table for that WEP information. SEQUENCE OF EntWlanWepInfoEntry .1.3.6.1.4.1.14125.100.5.3 |
entWlanWepInfoEntryAn entry in the entWlanWepInfoTable. EntWlanWepInfoEntry .1.3.6.1.4.1.14125.100.5.3.1 |
entWlanESSIDIndexThe auxiliary variable used to identify instances of columnar objects in the WEP information Tablero INTEGER .1.3.6.1.4.1.14125.100.5.3.1.1 |
entWlanWepKeyIDThis attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys arrayrw INTEGER .1.3.6.1.4.1.14125.100.5.3.1.2 |
entWlanWepKey1ValueSet key1 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)rw OCTET STRING .1.3.6.1.4.1.14125.100.5.3.1.3 |
entWlanWepKey2ValueSet key2 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)rw OCTET STRING .1.3.6.1.4.1.14125.100.5.3.1.4 |
entWlanWepKey3ValueSet key3 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)rw OCTET STRING .1.3.6.1.4.1.14125.100.5.3.1.5 |
entWlanWepKey4ValueSet key4 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)rw OCTET STRING .1.3.6.1.4.1.14125.100.5.3.1.6 |
entWlanWPAInfoTableThis table provides one row for each WPA information. Each row contains the enterprise WPA information Table for that WPA information. SEQUENCE OF EntWlanWPAInfoEntry .1.3.6.1.4.1.14125.100.5.4 |
entWlanWPAInfoEntryAn entry in the entWlanWPAInfoTable. EntWlanWPAInfoEntry .1.3.6.1.4.1.14125.100.5.4.1 |
entWlanWPAESSIDIndexThe auxiliary variable used to identify instances of columnar objects in the WPA information Tablero INTEGER .1.3.6.1.4.1.14125.100.5.4.1.1 |
entPresharedKeyThe WPA Pre-Shared key. (8~63 ASCII or 64 HEX)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.100.5.4.1.2 |
ent802dot1xInfoTableThis table provides one row for each 802.1x information. Each row contains the enterprise 802.1x information Table for that 802.1x information. SEQUENCE OF Ent802dot1xInfoEntry .1.3.6.1.4.1.14125.100.5.5 |
ent802dot1xInfoEntryAn entry in the ent802dot1xInfoTable. Ent802dot1xInfoEntry .1.3.6.1.4.1.14125.100.5.5.1 |
entWlan802dot1xESSIDIndexThe auxiliary variable used to identify instances of columnar objects in the 802.1x information Tablero INTEGER .1.3.6.1.4.1.14125.100.5.5.1.1 |
entRADIUSServerIPAddressThe address of RADIUS Serverrw IpAddress .1.3.6.1.4.1.14125.100.5.5.1.2 |
entRADIUSServerPortThe port of RADIUS Serverrw INTEGER .1.3.6.1.4.1.14125.100.5.5.1.3 |
entRADIUSServerPasswordThe password of RADIUS Serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.100.5.5.1.4 |
entWlan802dot1xEnableSet this attribute TRUE will enable 802.1xrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.5.5.1.5 |
entWlanClientListInfoTableThis table provides one row for Wlan client list information. SEQUENCE OF EntWlanClientListInfoEntry .1.3.6.1.4.1.14125.100.5.6 |
entWlanClientListInfoEntryAn entry in the entWlanClientListInfoTable. EntWlanClientListInfoEntry .1.3.6.1.4.1.14125.100.5.6.1 |
entCLInfoIndexThe auxiliary variable used to identify instances of columnar objects in the ClientList information Tablero INTEGER .1.3.6.1.4.1.14125.100.5.6.1.1 |
entCLInterfaceThe Client connected SSIDrw OCTET STRING .1.3.6.1.4.1.14125.100.5.6.1.2 |
entCLMACThe Client MACrw OCTET STRING .1.3.6.1.4.1.14125.100.5.6.1.3 |
entCLRxThe Rx valuerw OCTET STRING .1.3.6.1.4.1.14125.100.5.6.1.4 |
entCLTxThe Tx valuerw OCTET STRING .1.3.6.1.4.1.14125.100.5.6.1.5 |
entCLSignalThe Client Wlan Signalrw INTEGER .1.3.6.1.4.1.14125.100.5.6.1.6 |
entCLConnectedTimeThe Client connected timerw OCTET STRING .1.3.6.1.4.1.14125.100.5.6.1.7 |
entCLIdleTimeThe Client idle timerw OCTET STRING .1.3.6.1.4.1.14125.100.5.6.1.8 |
entSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.6 |
entSNMPStatusThe status of current SNMP agent.0:disable, 1:Enablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.6.1 |
entSNMPVerTypeThe version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3rw Enumeration .1.3.6.1.4.1.14125.100.6.2 |
entSNMPCommunityTableThis table provides one row for each SNMP community. Each row contains the enterprise SNMP community table for that SNMP community. SEQUENCE OF EntSNMPCommunityEntry .1.3.6.1.4.1.14125.100.6.3 |
entSNMPCommunityEntryAn entry in the entSNMPCommunityTable. EntSNMPCommunityEntry .1.3.6.1.4.1.14125.100.6.3.1 |
entSNMPCommunityIndexThe auxiliary variable used to identify instances of columnar objects in the SNMP Community Tablero INTEGER .1.3.6.1.4.1.14125.100.6.3.1.1 |
entSNMPCommunityNameThe community name used to access SNMP device.rw DisplayString .1.3.6.1.4.1.14125.100.6.3.1.2 |
entSNMPCommunityTypeThe auxiliary variable used to identify instances of columnar objects in the SNMP Community Tablero Enumeration .1.3.6.1.4.1.14125.100.6.3.1.3 |
entSNMPCommunityValidDisplay the validity information of corresponding community indexro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.6.3.1.4 |
entSNMPTrap OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.6.4 |
entTrapStatusThe trap status of current SNMP agent.0:disable, 1:Enablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.100.6.4.1 |
entTrapVerThe trap version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3rw Enumeration .1.3.6.1.4.1.14125.100.6.4.2 |
entTrapReceiverIPAddressSpecify the IP address(host) to receive the trap reportrw IpAddress .1.3.6.1.4.1.14125.100.6.4.3 |
entTrapReceiverCommunityNameSpecify the community name for SNMP manager to receive the trap reportrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.100.6.4.4 |
entTraps OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.20 |
entSystemTraps OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.20.1 |
entSystemTrapsRebootThe trap is generated when the system is rebooted. NOTIFICATION-TYPE .1.3.6.1.4.1.14125.100.20.1.1 |
entSystemTrapsRestoreToDefaultThe trap is generated when the default configuration of the system is restored. NOTIFICATION-TYPE .1.3.6.1.4.1.14125.100.20.1.2 |
entSystemTrapsReloadModulesThe trap is generated when the system modules are reloaded. NOTIFICATION-TYPE .1.3.6.1.4.1.14125.100.20.1.3 |
entWanTraps OBJECT IDENTIFIER .1.3.6.1.4.1.14125.100.20.2 |
entWanTrapsLinkDisconnectThe trap is generated when the PHY of WAN is disconnected and it was connected. NOTIFICATION-TYPE .1.3.6.1.4.1.14125.100.20.2.1 |
entWanTrapsLinkRecoverThe trap is generated when the PHY of WAN is connected and it was disconnected NOTIFICATION-TYPE .1.3.6.1.4.1.14125.100.20.2.2 |