SENAO-EOR7550-MIB
AI MIB Summary
The SENAO-EOR7550-MIB module extends IEEE 802.11 management capabilities to monitor vendor-specific performance metrics and operational states on Senao EOR7550 wireless access points. This implementation-specific supplement enables granular visibility into proprietary device behaviors and 802.11 parameters not covered by standard MIBs.
The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.11 MIB proposed by IEEE.
Main OID:
senao.1.3.6.1.4.1.14125
107
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
107 total| Object Name |
|---|
senaoThe MIB module defines Senao implementation-specific metrics useful in managing
IEEE 802.11 on Senao devices.
This is used as a supplement to the standard 802.11 MIB proposed by IEEE. MODULE-IDENTITY .1.3.6.1.4.1.14125 |
eor7550 OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101 |
entSystem OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.1 |
entPasswordAdministration passwordrw DisplayString .1.3.6.1.4.1.14125.101.1.2 |
entSysModelSystem modelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.101.1.3 |
entSysModeSystem mode, 0:AP router, 1:Repeater, 2: AP bridge,
3: Client bridge, 4: Client router, 5: WDS bridge,
6: AP router repeater, 7: WDS repeater, 8: WDS router repeaterro Enumeration .1.3.6.1.4.1.14125.101.1.4 |
entSysUpTimeSystem uptimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14125.101.1.5 |
entHwVersionThe version of the hardwarero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.101.1.6 |
entSNSerial Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.101.1.7 |
entKenelVersionThe version of the kernelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.101.1.8 |
entAppVersionThe version of the system applicationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.101.1.9 |
entResetSetting this attribute TRUE causes the AP rebootedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.1.10 |
entResetToDefaultSetting this attribute TRUE will Reboot the system and change settings to factory defaultrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.1.11 |
entApplyModulesSetting this attribute TRUE will apply the changed modules to reloadrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.1.12 |
entLAN OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.2 |
entLANIPLAN IP addressrw IpAddress .1.3.6.1.4.1.14125.101.2.1 |
entLANSubnetMaskLAN subnet maskrw IpAddress .1.3.6.1.4.1.14125.101.2.2 |
entSTPEnableSet this attribute TUUE will enable 802.1d Spanning Tree.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.2.3 |
entDHCPEnableWhen system mode is not 1(Repeater) and 5(WDS bridge),
set this attribute TUUE will enable the DHCP server function of devicerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.2.4 |
entIPPoolStartTWhen system mode is not 1(Repeater) and 5(WDS bridge),
set the start address of DHCP IP poolrw IpAddress .1.3.6.1.4.1.14125.101.2.5 |
entIPPoolEndWhen system mode is not 1(Repeater) and 5(WDS bridge),
set the end address of DHCP IP poolrw IpAddress .1.3.6.1.4.1.14125.101.2.6 |
entIPLeaseTimeWhen system mode is not 1(Repeater) and 5(WDS bridge),
the time period client can have the IP address assigned by DHCP server
0(half hour),
1(one hour)
2(two hours),
3(half day),
4(one day),
5(two days),
6(one week),
7(two weeks),
8(forever)rw Enumeration .1.3.6.1.4.1.14125.101.2.7 |
entWAN OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.3 |
entRouterEnableOnly When op mode is 0(AP) or (Client bridge),
can set this attribute. Set TUUE will enable the router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.3.1 |
entMacFilter OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.4 |
entLanMacFilteringEnableSet this attribute TUUE will enable the LAN MAC filteringrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.4.1 |
entLanMacFilteringModeThe mode of LAN MAC filtering can be 0(white list), 1(black list)rw Enumeration .1.3.6.1.4.1.14125.101.4.2 |
entLanMacFilterTableThis table provides one row for each LAN MAC filtering.
Each row contains the enterprise LAN MAC filtering table
for that LAN MAC filtering. SEQUENCE OF EntLanMacFilterEntry .1.3.6.1.4.1.14125.101.4.3 |
entLanMacFilterEntryAn entry in the entLanMacFilterTable. EntLanMacFilterEntry .1.3.6.1.4.1.14125.101.4.3.1 |
entMacAddressIndexThe auxiliary variable used to identify instances of
columnar objects in the LAN MAC Filtering Tablero INTEGER .1.3.6.1.4.1.14125.101.4.3.1.1 |
entMacAddressMAC address list in the LAN MAC filtering tablero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.101.4.3.1.2 |
entMacFilteringValidThe validity status of each corresponding MAC address in LAN MAC filtering tablero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.4.3.1.3 |
entRalinkWlan OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.5 |
entWlanCommonInfo OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.5.1 |
entRadioSet this attribute TUUE will enable the radiorw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.5.1.2 |
entNDataRateThis attribute specifies the 11n data raterw Enumeration .1.3.6.1.4.1.14125.101.5.1.8 |
entChannelBandwidthThis attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ)rw INTEGER .1.3.6.1.4.1.14125.101.5.1.14 |
entWlanESSIDInfoTableThis table provides one row for each ESSID information.
Each row contains the enterprise ESSID information Table
for that ESSID information. SEQUENCE OF EntWlanESSIDInfoEntry .1.3.6.1.4.1.14125.101.5.2 |
entWlanESSIDInfoEntryAn entry in the entWlanESSIDInfoTable. EntWlanESSIDInfoEntry .1.3.6.1.4.1.14125.101.5.2.1 |
entWlanWepInfoTableThis table provides one row for each WEP information.
Each row contains the enterprise WEP information Table
for that WEP information. SEQUENCE OF EntWlanWepInfoEntry .1.3.6.1.4.1.14125.101.5.3 |
entWlanWepInfoEntryAn entry in the entWlanWepInfoTable. EntWlanWepInfoEntry .1.3.6.1.4.1.14125.101.5.3.1 |
entWlanWPAInfoTableThis table provides one row for each WPA information.
Each row contains the enterprise WPA information Table
for that WPA information. SEQUENCE OF EntWlanWPAInfoEntry .1.3.6.1.4.1.14125.101.5.4 |
entWlanWPAInfoEntryAn entry in the entWlanWPAInfoTable. EntWlanWPAInfoEntry .1.3.6.1.4.1.14125.101.5.4.1 |
ent802dot1xInfoTableThis table provides one row for each 802.1x information.
Each row contains the enterprise 802.1x information Table
for that 802.1x information. SEQUENCE OF Ent802dot1xInfoEntry .1.3.6.1.4.1.14125.101.5.5 |
ent802dot1xInfoEntryAn entry in the ent802dot1xInfoTable. Ent802dot1xInfoEntry .1.3.6.1.4.1.14125.101.5.5.1 |
entSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.6 |
entSNMPStatusThe status of current SNMP agent.0:disable, 1:Enablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.6.1 |
entSNMPVerTypeThe version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3rw Enumeration .1.3.6.1.4.1.14125.101.6.2 |
entSNMPCommunityTableThis table provides one row for each SNMP community.
Each row contains the enterprise SNMP community table
for that SNMP community. SEQUENCE OF EntSNMPCommunityEntry .1.3.6.1.4.1.14125.101.6.3 |
entSNMPCommunityEntryAn entry in the entSNMPCommunityTable. EntSNMPCommunityEntry .1.3.6.1.4.1.14125.101.6.3.1 |
entSNMPCommunityIndexThe auxiliary variable used to identify instances of
columnar objects in the SNMP Community Tablero INTEGER .1.3.6.1.4.1.14125.101.6.3.1.1 |
entSNMPCommunityNameThe community name used to access SNMP device.rw DisplayString .1.3.6.1.4.1.14125.101.6.3.1.2 |
entSNMPCommunityTypeThe auxiliary variable used to identify instances of
columnar objects in the SNMP Community Tablero Enumeration .1.3.6.1.4.1.14125.101.6.3.1.3 |
entSNMPCommunityValidDisplay the validity information of corresponding community indexro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.6.3.1.4 |
entSNMPTrap OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.6.4 |
entTrapStatusThe trap status of current SNMP agent.0:disable, 1:Enablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.6.4.1 |
entTrapVerThe trap version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3rw Enumeration .1.3.6.1.4.1.14125.101.6.4.2 |
entTrapReceiverIPAddressSpecify the IP address(host) to receive the trap reportrw IpAddress .1.3.6.1.4.1.14125.101.6.4.3 |
entTrapReceiverCommunityNameSpecify the community name for SNMP manager to receive the trap reportrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.101.6.4.4 |
entAthWlan OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.7 |
entAthWlanCommonInfo OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.7.1 |
entOpModeGet op mode: 0(AP), 1(Client bridge), 2(Client router),
3(WDS bridge), 4(WDS repeater), 5(Repeater ap), 6(Repeater station),
7(Disable)ro Enumeration .1.3.6.1.4.1.14125.101.7.1.1 |
entBandThe wireless mode:
0(802.11 b/g),
1(802.11 b),
2(802.11 a),
4(802.11 g)rw Enumeration .1.3.6.1.4.1.14125.101.7.1.4 |
entESSIDNumOnly when op mode for Atheros is 0(AP),
set the Number of multiple ESSIDrw INTEGER .1.3.6.1.4.1.14125.101.7.1.5 |
entChannelOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The current operating frequency channelrw INTEGER .1.3.6.1.4.1.14125.101.7.1.6 |
entDataRateThis attribute specifies the data rate at which the station may transmit data in Mbps
0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps),
18(18Mbps), 24(24Mbps), 36(36Mbps), 48(48Mbps), 54(54Mbps)rw Enumeration .1.3.6.1.4.1.14125.101.7.1.7 |
entTxPowerOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%)rw INTEGER .1.3.6.1.4.1.14125.101.7.1.9 |
entBeaconIntervalOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute specifies the number of TU that a station shall use
for scheduling Beacon transmissionsrw INTEGER .1.3.6.1.4.1.14125.101.7.1.10 |
entDTIMPeriodOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute specifies the number of beacon intervalsrw INTEGER .1.3.6.1.4.1.14125.101.7.1.11 |
entFragmentationThresholdThis attribute shall specify the current maximum size, in octets,
of the MPDU that may be delivered to the PHYrw INTEGER .1.3.6.1.4.1.14125.101.7.1.12 |
entRTSThresholdThis attribute shall indicate the number of octets in an MPDU,
below which an RTS/CTS handshake shall not be performed.rw INTEGER .1.3.6.1.4.1.14125.101.7.1.13 |
entPreambleTypeThis attribute specifies the preamble type: 1(Short), 2(Long)rw Enumeration .1.3.6.1.4.1.14125.101.7.1.15 |
entCTSProtectionOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None)rw Enumeration .1.3.6.1.4.1.14125.101.7.1.16 |
entDistanceACK timeoutrw INTEGER .1.3.6.1.4.1.14125.101.7.1.17 |
entAthWlanESSIDInfoTableThis table provides one row for each ESSID information.
Each row contains the enterprise ESSID information Table
for that ESSID information. SEQUENCE OF EntAthWlanESSIDInfoEntry .1.3.6.1.4.1.14125.101.7.2 |
entAthWlanESSIDInfoEntryAn entry in the entWlanESSIDInfoTable. EntAthWlanESSIDInfoEntry .1.3.6.1.4.1.14125.101.7.2.1 |
entWlanESSIDInfoIndexOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The auxiliary variable used to identify instances of columnar
objects in the ESSID information Tablero INTEGER .1.3.6.1.4.1.14125.101.7.2.1.1 |
entESSIDOnly when op mode for Atheros is 0(AP),
This attribute reflects the Service Set ID used in
the Desired- SSID parameter of the most recent MLME_Scan.requestrw OCTET STRING .1.3.6.1.4.1.14125.101.7.2.1.2 |
entBroadcastESSIDOnly when op mode for Atheros is 0(AP),
Set this attribute TUUE will enable the hidden SSIDrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.7.2.1.3 |
entWMMOnly when op mode for Atheros is 0(AP),
Set this attribute TUUE will enable WMMrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.7.2.1.4 |
entEncryptionOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The WLAN encryption: 0(none), 1(WEP), 2(TKIP), 3(AES), 4(TKIPAES)rw INTEGER .1.3.6.1.4.1.14125.101.7.2.1.5 |
entWlanAuthenticationTypeOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The current authentication algorithms: 0 (openSystem), 1(wepAuto),
2(sharedKey), 3(WPAPSK), 4(WPA), 5(WPA2PSK), 6(WPA2), 7(WPA1WPA2),
8(WPA1PSKWPA2PSK)rw INTEGER .1.3.6.1.4.1.14125.101.7.2.1.6 |
entAthWlanWepInfoTableThis table provides one row for each WEP information.
Each row contains the enterprise WEP information Table
for that WEP information. SEQUENCE OF EntAthWlanWepInfoEntry .1.3.6.1.4.1.14125.101.7.3 |
entAthWlanWepInfoEntryAn entry in the entWlanWepInfoTable. EntAthWlanWepInfoEntry .1.3.6.1.4.1.14125.101.7.3.1 |
entWlanWepKeyIDOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute shall indicate the use of the first, second, third, or fourth
element of the WEPDefaultKeys arrayrw INTEGER .1.3.6.1.4.1.14125.101.7.3.1.2 |
entWlanWepKey1ValueOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
Set key1 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)rw OCTET STRING .1.3.6.1.4.1.14125.101.7.3.1.3 |
entWlanWepKey2ValueOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
Set key2 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)rw OCTET STRING .1.3.6.1.4.1.14125.101.7.3.1.4 |
entWlanWepKey3ValueOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
Set key3 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)rw OCTET STRING .1.3.6.1.4.1.14125.101.7.3.1.5 |
entWlanWepKey4ValueOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
Set key4 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers)rw OCTET STRING .1.3.6.1.4.1.14125.101.7.3.1.6 |
entAthWlanWPAInfoTableThis table provides one row for each WPA information.
Each row contains the enterprise WPA information Table
for that WPA information. SEQUENCE OF EntAthWlanWPAInfoEntry .1.3.6.1.4.1.14125.101.7.4 |
entAthWlanWPAInfoEntryAn entry in the entWlanWPAInfoTable. EntAthWlanWPAInfoEntry .1.3.6.1.4.1.14125.101.7.4.1 |
entPresharedKeyOnly when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The WPA Pre-Shared key. (8~63 ASCII or 64 HEX)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.101.7.4.1.2 |
entAth802dot1xInfoTableThis table provides one row for each 802.1x information.
Each row contains the enterprise 802.1x information Table
for that 802.1x information. SEQUENCE OF EntAth802dot1xInfoEntry .1.3.6.1.4.1.14125.101.7.5 |
entAth802dot1xInfoEntryAn entry in the ent802dot1xInfoTable. EntAth802dot1xInfoEntry .1.3.6.1.4.1.14125.101.7.5.1 |
entWlanESSIDIndexOnly when op mode for Atheros is 0(AP),
The auxiliary variable used to identify instances of columnar
objects in the 802.1x information Tablero INTEGER .1.3.6.1.4.1.14125.101.7.5.1.1 |
entRADIUSServerIPAddressOnly when op mode for Atheros is 0(AP),
The address of RADIUS Serverrw IpAddress .1.3.6.1.4.1.14125.101.7.5.1.2 |
entRADIUSServerPortOnly when op mode for Atheros is 0(AP),
The port of RADIUS Serverrw INTEGER .1.3.6.1.4.1.14125.101.7.5.1.3 |
entRADIUSServerPasswordOnly when op mode for Atheros is 0(AP),
The password of RADIUS Serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.101.7.5.1.4 |
entWlan802dot1xEnableOnly when op mode for Atheros is 0(AP),
Set this attribute TUUE will enable 802.1xrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14125.101.7.5.1.5 |
entTraps OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.20 |
entSystemTraps OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.20.1 |
entSystemTrapsRebootThe trap is generated when the system is rebooted. NOTIFICATION-TYPE .1.3.6.1.4.1.14125.101.20.1.1 |
entSystemTrapsRestoreToDefaultThe trap is generated when the default configuration of the system
is restored. NOTIFICATION-TYPE .1.3.6.1.4.1.14125.101.20.1.2 |
entSystemTrapsReloadModulesThe trap is generated when the system modules are reloaded. NOTIFICATION-TYPE .1.3.6.1.4.1.14125.101.20.1.3 |
entWanTraps OBJECT IDENTIFIER .1.3.6.1.4.1.14125.101.20.2 |
entWanTrapsLinkDisconnectThe trap is generated when the PHY of WAN is disconnected and
it was connected. NOTIFICATION-TYPE .1.3.6.1.4.1.14125.101.20.2.1 |
entWanTrapsLinkRecoverThe trap is generated when the PHY of WAN is connected and
it was disconnected NOTIFICATION-TYPE .1.3.6.1.4.1.14125.101.20.2.2 |