SENAO-WLAN-AP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SENAO-WLAN-AP-MIB.
57
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
senaoMIB OBJECT IDENTIFIER .1.3.6.1.4.1.14125 |
RFC1213-MIB Unknown .1.3.6.1.4.1.14125 |
senaoRFC1213Group OBJECT IDENTIFIER .1.3.6.1.4.1.14125.1 |
ip OBJECT IDENTIFIER .1.3.6.1.4.1.14125.1.1 |
ipInReceivesThe total number of input datagrams received from
interfaces, including those received in error.
@GET-FUNC=get_ip_rowro Counter .1.3.6.1.4.1.14125.1.1.1 |
ipForwDatagramsThe number of input datagrams for which this
entity was not their final IP destination, as a
result of which an attempt was made to find a
route to forward them to that final destination.
In entities which do not act as IP Gateways, this
counter will include only those packets which were
Source-Routed via this entity, and the Source-
Route option processing was successful.
@GET-FUNC=get_ip_rowro Counter .1.3.6.1.4.1.14125.1.1.2 |
icmp OBJECT IDENTIFIER .1.3.6.1.4.1.14125.1.2 |
icmpInMsgsThe total number of ICMP messages which the
entity received. Note that this counter includes
all those counted by icmpInErrors.
@GET-FUNC=get_icmp_rowro Counter .1.3.6.1.4.1.14125.1.2.1 |
icmpOutMsgsThe total number of ICMP messages which this
entity attempted to send. Note that this counter
includes all those counted by icmpOutErrors.
@GET-FUNC=get_icmp_rowro Counter .1.3.6.1.4.1.14125.1.2.2 |
tcp OBJECT IDENTIFIER .1.3.6.1.4.1.14125.1.3 |
tcpInSegsThe total number of segments received, including
those received in error. This count includes
segments received on currently established
connections.
@GET-FUNC=get_tcp_rowro Counter .1.3.6.1.4.1.14125.1.3.1 |
tcpOutSegsThe total number of segments sent, including
those on current connections but excluding those
containing only retransmitted octets.
@GET-FUNC=get_tcp_rowro Counter .1.3.6.1.4.1.14125.1.3.2 |
udp OBJECT IDENTIFIER .1.3.6.1.4.1.14125.1.4 |
udpInDatagramsThe total number of UDP datagrams delivered to
UDP users.
@GET-FUNC=get_udp_rowro Counter .1.3.6.1.4.1.14125.1.4.1 |
udpOutDatagramsThe total number of UDP datagrams sent from this
entity.
@GET-FUNC=get_udp_rowro Counter .1.3.6.1.4.1.14125.1.4.2 |
statusInformationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14125.2 |
connectedToSSIDThis attribute reflects the Service Set ID.
This value may be modified by an external management
entity and used by the local SME to make decisions
about the Scanning process. The connectedToSSID
length is limit between 1~ 32 characters.
@GET-FUNC=get_statusInfo_group
@SET-FUNC=set_statusInfo_grouprw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.2.1 |
usingChannelThe operating frequency channel. Valid numbers
are as defind in ISO/IEC 8802-11:1999, 15.4.6.2.
@GET-FUNC=get_statusInfo_groupro Enumeration .1.3.6.1.4.1.14125.2.2 |
accessPointMACAddressThe MAC address of the Access Point (BSS identifier)
with which the radio should Connected or Associated.
@GET-FUNC=get_statusInfo_groupro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.14125.2.3 |
currentTransmissionRateThe transmit bit rates operated, corresponding to data rates
from 1 Mb/s to 54 Mb/s.
@GET-FUNC=get_statusInfo_groupro INTEGER .1.3.6.1.4.1.14125.2.4 |
currentIPAddressThe IP address of this device used over its Ethernet
interface in Routing mode or Bridge interface in Bridgeing mode.
@GET-FUNC=get_statusInfo_groupro IpAddress .1.3.6.1.4.1.14125.2.5 |
currentTXPowerThe Transmit Power of this device used.
@GET-FUNC=get_statusInfo_group
@SET-FUNC=set_statusInfo_grouprw Enumeration .1.3.6.1.4.1.14125.2.6 |
countersGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14125.3 |
receivedPacketsGoodCountThe number of good packets received on the radio interface,
including unicast, broadcast and multicast packets.
@GET-FUNC=get_counters_groupro Counter .1.3.6.1.4.1.14125.3.1 |
receivedPacketsBadCountThe number of inbound bad packets of the radio interface
were chosen to be discarded even though no errors had been
detected to prevent their being received. One possible reason
for discarding such a packet could be to free up buffer space.
Another reason would be exceeding their maximum time-to-live.
@GET-FUNC=get_counters_groupro Counter .1.3.6.1.4.1.14125.3.2 |
sendPacketsGoodCountThe number of good packets transmitted on the radio interface,
including unicast, broadcast and multicast packets.
@GET-FUNC=get_counters_groupro Counter .1.3.6.1.4.1.14125.3.3 |
sendPacketsBadCountThe number of outbound bad packets of the radio interface
were chosen to be discarded even though no errors had been
detected to prevent their being transmitted. One possible reason
for discarding such a packet could be to free up buffer space.
Another reason would be exceeding their maximum time-to-live.
@GET-FUNC=get_counters_groupro Counter .1.3.6.1.4.1.14125.3.4 |
privacySettingsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14125.4 |
wepEnabledWhen this attribute is enable, it shall indicate that the IEEE
802.11 WEP mechanism is used for transmitting frames of type
Data. The default value of this attribute shall be disable.
@GET-FUNC=get_privacy_group
@SET-FUNC=set_privacy_grouprw Enumeration .1.3.6.1.4.1.14125.4.1 |
wepKeyLengthThe length of WEP key that is used for transmitting and received
frames of type Data. The value of 0 denotes WEP64bit Hex. Key;
1 stands for WEP128bit Hex. Key
@GET-FUNC=get_privacy_group
@SET-FUNC=set_privacy_grouprw Enumeration .1.3.6.1.4.1.14125.4.2 |
wepKeyNumberThis attribute shall indicate the use of the first,
second, third, or fourth element of the WEPDefaultKeys
array when set to values of 1, 2, 3, or 4. The
default value of this attribute shall be 0.
@GET-FUNC=get_privacy_group
@SET-FUNC=set_privacy_grouprw Enumeration .1.3.6.1.4.1.14125.4.3 |
wepKeyA WEP secret key value. 10 Hex. Keys for WEP 64Bits/26 Hex. Keys for WEP128Bits.
@GET-FUNC=get_privacy_group
@SET-FUNC=set_privacy_grouprw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.4.4 |
systemSettingsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14125.5 |
operationModeThis defines the type of role of a wireless device.
The device types are:
Bridge(1)
AP+WDS(2)
@GET-FUNC=get_system_groupro Enumeration .1.3.6.1.4.1.14125.5.1 |
ipAddressThe IP address of this device used over its Ethernet
interface in AP mode. The IP address must NOT to set
[x.x.x.0] or [x,x.x.255].
@GET-FUNC=get_system_group
@SET-FUNC=set_system_grouprw IpAddress .1.3.6.1.4.1.14125.5.2 |
subnetMaskThe IP Network mask used by the IP entity when accessing
devices through any of its Ethernet interface in Routing mode
or Bridge interface in Bridgeing mode.
The value of subnet mask must set to 0, 128, 192, 224, 240, 248, 252, 254, 255.
@GET-FUNC=get_system_group
@SET-FUNC=set_system_grouprw IpAddress .1.3.6.1.4.1.14125.5.3 |
ipGatewayThe IP address of this device's Gateway.
The value of IP Gateway must NOT set to 0 or 255
@GET-FUNC=get_system_group
@SET-FUNC=set_system_grouprw IpAddress .1.3.6.1.4.1.14125.5.4 |
deviceNameThe description name of this device.
The deviceName length is limit between
1~32 characters.
@GET-FUNC=get_system_group
@SET-FUNC=set_system_grouprw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.5.5 |
saveRebootSave and Reboot System.
The save Reboot value must set to 1 when you enable this function.
@GET-FUNC=get_system_group
@SET-FUNC=set_system_grouprw INTEGER .1.3.6.1.4.1.14125.5.6 |
webAdministratorSettingsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14125.6 |
userNameUser Name assigned to the system for use when
authenticating with Web browser. The username length
limit is 15 characters.
@GET-FUNC=get_webAdmin_group
@SET-FUNC=set_webAdmin_grouprw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.6.1 |
passwordUser Password assigned to the system
for use when authenticating with Web browser. The
password length limit is 15 characters.
@GET-FUNC=get_webAdmin_group
@SET-FUNC=set_webAdmin_grouprw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14125.6.2 |
dhcpSettingsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14125.7 |
dhcpEnabledWhen this attribute is enable, it shall indicate
that the DHCP mechanism is used. The default value
of this attribute shall be disable.
@GET-FUNC=get_dhcp_group
@SET-FUNC=set_dhcp_grouprw Enumeration .1.3.6.1.4.1.14125.7.1 |
dhcpLeaseTimesThe value indicates how many minutes for DHCP
lease time. The value should be set between 1
and 65535.
@GET-FUNC=get_dhcp_group
@SET-FUNC=set_dhcp_grouprw INTEGER .1.3.6.1.4.1.14125.7.2 |
dhcpIPAddressFromTo set DHCP IP address range between dhcpIPAddressFrom
and dhcpIPAddressTo. The IP address must NOT to set
[x.x.x.0] or [x,x.x.255].And the DHCP address range
must be in the LAN subnet.
@GET-FUNC=get_dhcp_group
@SET-FUNC=set_dhcp_grouprw IpAddress .1.3.6.1.4.1.14125.7.3 |
dhcpIPAddressToTo set DHCP IP address range between dhcpIPAddressFrom
and dhcpIPAddressTo. The IP address must NOT to set
[x.x.x.0] or [x,x.x.255].And the DHCP address range
must be in the LAN subnet.
@GET-FUNC=get_dhcp_group
@SET-FUNC=set_dhcp_grouprw IpAddress .1.3.6.1.4.1.14125.7.4 |
wdsSettingsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14125.8 |
wdsEnabledWhen this attribute is enable, it shall indicate
that the WDS mechanism is used. The default value
of this attribute shall be disable.
@GET-FUNC=get_wds_group
@SET-FUNC=set_wds_grouprw Enumeration .1.3.6.1.4.1.14125.8.1 |
wdsAPMACAddress1To set the MAC address of the Access Point for WDS.
The format to set as 'ABCDEF123456'.
And Leave blank to disable WDS for that slot.
@GET-FUNC=get_wds_group
@SET-FUNC=set_wds_grouprw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.14125.8.2 |
wdsAPMACAddress2To set the MAC address of the Access Point for WDS.
The format to set as 'ABCDEF123456'.
And Leave blank to disable WDS for that slot.
@GET-FUNC=get_wds_group
@SET-FUNC=set_wds_grouprw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.14125.8.3 |
wdsAPMACAddress3To set the MAC address of the Access Point for WDS.
The format to set as 'ABCDEF123456'.
And Leave blank to disable WDS for that slot.
@GET-FUNC=get_wds_group
@SET-FUNC=set_wds_grouprw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.14125.8.4 |
wdsAPMACAddress4To set the MAC address of the Access Point for WDS.
The format to set as 'ABCDEF123456'.
And Leave blank to disable WDS for that slot.
@GET-FUNC=get_wds_group
@SET-FUNC=set_wds_grouprw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.14125.8.5 |
wdsAPMACAddress5To set the MAC address of the Access Point for WDS.
The format to set as 'ABCDEF123456'.
And Leave blank to disable WDS for that slot.
@GET-FUNC=get_wds_group
@SET-FUNC=set_wds_grouprw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.14125.8.6 |
wdsAPMACAddress6To set the MAC address of the Access Point for WDS.
The format to set as 'ABCDEF123456'.
And Leave blank to disable WDS for that slot.
@GET-FUNC=get_wds_group
@SET-FUNC=set_wds_grouprw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.14125.8.7 |
wdsKeyUsedWDS only supports None or WEP security mode.
When this attribute is wep, it shall indicate that the IEEE
802.11 WEP mechanism is used for transmitting frames of type
Data. The default value of this attribute shall be none.
@GET-FUNC=get_wds_groupro Enumeration .1.3.6.1.4.1.14125.8.8 |
wdsKeyTypeWDS only supports None or WEP security mode.
The length of WEP key that is used for transmitting and received
frames of type Data. The value of 2 denotes WEP64bit Hex. Key;
3 stands for WEP128bit Hex. Key
@GET-FUNC=get_wds_groupro Enumeration .1.3.6.1.4.1.14125.8.9 |