Dell-rlLcli-MIB
The Dell-rlLcli-MIB enables SNMP-based monitoring and management of remote CLI session states, active user connections, and command execution logs on Dell networking hardware. This module specifically tracks CLI session metrics such as connection counts, session timeouts, and authentication events to facilitate remote access auditing and troubleshooting.
Imported Objects
Objects
19 total| Object Name |
|---|
rlLCliThe private MIB module definition for Dell CLI MIB. MODULE-IDENTITY .1.3.6.1.4.1.89.74 |
rlLCliMibVersionMIB's version, the current version is 3.ro INTEGER .1.3.6.1.4.1.89.74.1 |
rlLCliTimeoutLCLI Timeout indicates the interval in seconds, that the system waits until user input is detected.rw Unsigned32 .1.3.6.1.4.1.89.74.2 |
rlLCliHistoryEnableIndicates if command history function is supported.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.74.3 |
rlLCliHistorySizeIndicates number of commands that the system will record in its history buffer.rw Unsigned32 .1.3.6.1.4.1.89.74.4 |
rlLcliCommandLevelTableThis Table maps a CLI command to its level. SEQUENCE OF RlLcliCommandLevelEntry .1.3.6.1.4.1.89.74.5 |
rlLcliCommandLevelEntryThe row definition for this table. RlLcliCommandLevelEntry .1.3.6.1.4.1.89.74.5.1 |
rlLcliCommandLevelCommandNameThe CLI command namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.74.5.1.1 |
rlLcliCommandLevelContextNameThe CLI context ID which the command name is associated withrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.74.5.1.2 |
rlLcliCommandLevelInsertTimeThe time elapsed until this entry was created.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.74.5.1.3 |
rlLcliCommandLevelCommandLevelThe level which is associated with the command namerw INTEGER .1.3.6.1.4.1.89.74.5.1.4 |
rlLcliCommandLevelActionModeThe level action which is associated with the command namerw Enumeration .1.3.6.1.4.1.89.74.5.1.5 |
rlLcliCommandLevelStatusThe status of the commandLevel table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.74.5.1.6 |
rlLCliSshTimeoutLCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on SSH LCLI.rw Unsigned32 .1.3.6.1.4.1.89.74.6 |
rlLCliTelnetTimeoutLCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on telnet LCLI.rw Unsigned32 .1.3.6.1.4.1.89.74.7 |
rlLCliTelnetHistoryEnableIndicates if command history function is supported for Telnet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.74.8 |
rlLCliTelnetHistorySizeIndicates number of commands that the system will record in its history buffer for Telnet.rw Unsigned32 .1.3.6.1.4.1.89.74.9 |
rlLCliSshHistoryEnableIndicates if command history function is supported for Ssh.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.74.10 |
rlLCliSshHistorySizeIndicates number of commands that the system will record in its history buffer for Ssh.rw Unsigned32 .1.3.6.1.4.1.89.74.11 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.