Dell-TIMESYNCHRONIZATION-MIB
AI MIB Summary
The Dell-TIMESYNCHRONIZATION-MIB enables monitoring and configuration of Simple Network Time Protocol (SNTP) parameters and system clock synchronization states on Dell network infrastructure. It exposes metrics for time source status, synchronization accuracy, and NTP/SNTP session management to ensure precise time alignment across the network.
The MIB module describes the private MIB for SNTP & TIME definitions.
Main OID:
rlTimeSynchronization.1.3.6.1.4.1.89.92
166
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
166 total| Object Name |
|---|
rlTimeSynchronizationThe MIB module describes the private MIB for SNTP & TIME definitions. MODULE-IDENTITY .1.3.6.1.4.1.89.92 |
rlTimeSyncMethodMode OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.1 |
rlTimeSyncMibVersionTimeSync Mib Version.ro INTEGER .1.3.6.1.4.1.89.92.1.1 |
rndTimeSyncManagedTimeThe time will be sent in the format hhmmssrw DisplayString .1.3.6.1.4.1.89.92.1.2 |
rndTimeSyncManagedDateThe date will be sent in the format ddmmyyrw DisplayString .1.3.6.1.4.1.89.92.1.3 |
rndTimeSyncManagedDateTimeThe date and time will be sent in the format ddmmyyhhmmssrw DisplayString .1.3.6.1.4.1.89.92.1.4 |
rlTimeSyncMethodMethod to be used for time synchronization in the device.rw RlTimeSyncMethod .1.3.6.1.4.1.89.92.1.5 |
rlTimeZoneOffset from Greenwich time (format [+/-]hh:mm).rw DisplayString .1.3.6.1.4.1.89.92.1.6 |
rlTimeZoneCodeCode definition for current TimeZone.rw DisplayString .1.3.6.1.4.1.89.92.1.7 |
rlDaylightSavingTimeModeDaylight Saving Time - Recurring/Date/None.rw RlDaylightSavingTimeMode .1.3.6.1.4.1.89.92.1.8 |
rlDaylightSavingTimeStartDaylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) n: 0-365 (zero-based Julian day of the year. Leap days shall be counted, and it is possible to refer to February 29). Format 2 for recurring mode is used only in the dynamic entry and should not be used in the static entry (with index 1).rw OCTET STRING .1.3.6.1.4.1.89.92.1.9 |
rlDaylightSavingTimeEndDaylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) n: 0-365 (zero-based Julian day of the year. Leap days shall be counted, and it is possible to refer to February 29). Format 2 for recurring mode is used only in the dynamic entry and should not be used in the static entry (with index 1).rw OCTET STRING .1.3.6.1.4.1.89.92.1.10 |
rlDaylightSavingTimeOffsetDaylight Saving Time - The number of minutes to add to the clock during summer time.rw Integer32 .1.3.6.1.4.1.89.92.1.11 |
rlDaylightSavingTimeCodeCode definition for current Daylight Saving Time.rw DisplayString .1.3.6.1.4.1.89.92.1.12 |
rlTZDSTOffsetLocal Time Zone and Daylight Saving Time offset in seconds.ro INTEGER .1.3.6.1.4.1.89.92.1.13 |
rlTimeZoneNameHuman readable string describing Local Time Zone and Daylight Saving Time.rw DisplayString .1.3.6.1.4.1.89.92.1.14 |
rlTimeZoneTableTimeZone information. SEQUENCE OF RlTimeZoneEntry .1.3.6.1.4.1.89.92.1.15 |
rlTimeZoneEntryThe row definition for this table. RlTimeZoneEntry .1.3.6.1.4.1.89.92.1.15.1 |
rlTimeZoneIndexEntry index. A row with index 2 will be existing in case the DHCP timezone is supported, and will contain Timezone and Summertime dynamic values. Using index 2 in SET operations is allowed only for SNMP inner clients (SNMPServ users), on condition that DHCP timezone option is supported. INTEGER .1.3.6.1.4.1.89.92.1.15.1.1 |
rlTimeZoneTimeSyncMethodMethod to be used for time synchronization in the device.rw RlTimeSyncMethod .1.3.6.1.4.1.89.92.1.15.1.2 |
rlTimeZoneTimeZoneOffsetOffset from Greenwich time (format [+/-]hh:mm).rw DisplayString .1.3.6.1.4.1.89.92.1.15.1.3 |
rlTimeZoneTimeZoneCodeCode definition for current TimeZone.rw DisplayString .1.3.6.1.4.1.89.92.1.15.1.4 |
rlTimeZoneDaylightSavingTimeModeDaylight Saving Time - Recurring/Date/None.rw RlDaylightSavingTimeMode .1.3.6.1.4.1.89.92.1.15.1.5 |
rlTimeZoneDaylightSavingTimeStartDaylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) n: 0-365 (zero-based Julian day of the year. Leap days shall be counted, and it is possible to refer to February 29). Format 2 for recurring mode is used only in the dynamic entry and should not be used in the static entry (with index 1).rw OCTET STRING .1.3.6.1.4.1.89.92.1.15.1.6 |
rlTimeZoneDaylightSavingTimeEndDaylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) n: 0-365 (zero-based Julian day of the year. Leap days shall be counted, and it is possible to refer to February 29). Format 2 for recurring mode is used only in the dynamic entry and should not be used in the static entry (with index 1).rw OCTET STRING .1.3.6.1.4.1.89.92.1.15.1.7 |
rlTimeZoneDaylightSavingTimeOffsetDaylight Saving Time - The number of minutes to add to the clock during summer time.rw Integer32 .1.3.6.1.4.1.89.92.1.15.1.8 |
rlTimeZoneDaylightSavingTimeCodeCode definition for current Daylight Saving Time.rw DisplayString .1.3.6.1.4.1.89.92.1.15.1.9 |
rlTimeZoneTZDSTOffsetLocal Time Zone and Daylight Saving Time offset in seconds.ro INTEGER .1.3.6.1.4.1.89.92.1.15.1.10 |
rlTimeZoneTimeZoneNameHuman readable string describing Local Time Zone and Daylight Saving Time.rw DisplayString .1.3.6.1.4.1.89.92.1.15.1.11 |
rlTimeZoneDataTypeThe type of data in this entry: static or dynamic.ro Enumeration .1.3.6.1.4.1.89.92.1.15.1.12 |
rlTimeZoneDataSourceIfIndexIfIndex of the interface through which the dynamic data of this row has been learned. The value of this field will be 0 if rlTimeZoneTimeDataType is static (since it is relevant only for dynamic entry), and this is the only value allowed for SET in this case.rw INTEGER .1.3.6.1.4.1.89.92.1.15.1.13 |
rlTimeZoneDataDynamicConfSourceThe source of dynamic data in this entry, for example: dhcpv4. Values other than 'none' are relevant only for dynamic entry.rw Enumeration .1.3.6.1.4.1.89.92.1.15.1.14 |
rlClockStatusCurrent status of the clock. The value 'invalid' means time is meaninglesss, since it has neither been manually configured nor achieved as a result of SNTP synchronization.ro Enumeration .1.3.6.1.4.1.89.92.1.16 |
rlDhcpTimezoneOptionEnabledSpecifies whether the DHCP Timezone option (DHCPv4 option 100) is supported in the system. Setting this value to FALSE, will clear Timezone and Summertime dynamic configuration, so that: 1) rlTimeZoneTimeZoneCode and rlTimeZoneDaylightSavingTimeCode length will be 0 for rlTimeZoneEntry whose index = 2 (dynamic entry). 2) the operative values of Timezone and Summertime will be those statically configured. Thus, GET operations on the following MIB scalars will result is static values: rlTimeZone, rlTimeZoneCode, rlDaylightSavingTimeMode, rlDaylightSavingTimeStart, rlDaylightSavingTimeEnd, rlDaylightSavingTimeOffset, rlDaylightSavingTimeCode, rlTZDSTOffset.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.1.17 |
rlAutomaticClockSetFromPCEnabledSpecifies whether automatic set of time and date is permitted from connected host PC. The feature is meant to be used in order to initialize the clock after reboot (if SNTP is not in use), since the device does not have a realtime clock.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.1.18 |
rlTimeAndDateHaveBeenSetIndicates whether the time and date have been set in the device, manually or through SNTP synchronization. If only time has been set, the value of this MIB will be FALSE. If only date has been set, the value of this MIB will be FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.1.19 |
rlSntpNtpClient OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.2 |
rlSntpNtpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.2.1 |
rlSntpNtpMibVersionSntpNtp Mib Version.ro INTEGER .1.3.6.1.4.1.89.92.2.1.1 |
rlSntpNtpConfigModeCurrent configuration operational mode of SNTP/NTP client.ro Enumeration .1.3.6.1.4.1.89.92.2.1.2 |
rlSntpNtpConfigSysStratumThe stratum of the local clock. If the value is set to 1, i.e., this is a primary reference, then the Primary-Clock procedure described in Section 3.4.6, in RFC-1305 is invoked.ro NTPStratum .1.3.6.1.4.1.89.92.2.1.3 |
rlSntpNtpConfigPollIntervalPeriod of time (in seconds) between succesive attempts to perform an update via SNTP.rw INTEGER .1.3.6.1.4.1.89.92.2.1.4 |
rlSntpNtpConfigPrimaryPollSrvAddrIp Address of a trusted SNTP server for polling.ro IpAddress .1.3.6.1.4.1.89.92.2.1.5 |
rlSntpNtpConfigPrimaryPollSrvMridThe mrid of the primary server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.6 |
rlSntpNtpConfigPrimaryPollSrvIfIndexThe interface addressed of the primary server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.7 |
rlSntpNtpConfigPrimaryPollSrvStratumThe stratum of the primary polling server.ro NTPStratum .1.3.6.1.4.1.89.92.2.1.8 |
rlSntpNtpConfigSyncSrvAddrIp Address of the synced server.ro IpAddress .1.3.6.1.4.1.89.92.2.1.9 |
rlSntpNtpConfigSyncSrvMridThe mrid of the synced server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.10 |
rlSntpNtpConfigSyncSrvIfIndexThe interface addressed of the synced server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.11 |
rlSntpNtpConfigSyncSrvTypeSynced server type.ro RlSntpNtpSyncType .1.3.6.1.4.1.89.92.2.1.12 |
rlSntpNtpConfigSyncSrvStratumThe stratum of the synced server.ro NTPStratum .1.3.6.1.4.1.89.92.2.1.13 |
rlSntpNtpConfigRetryTimeoutSNTP/NTP requests Retry Interval.ro Integer32 .1.3.6.1.4.1.89.92.2.1.14 |
rlSntpNtpConfigRetryCntSNTP/NTP requests Retry Count.ro Integer32 .1.3.6.1.4.1.89.92.2.1.15 |
rlSntpNtpConfigSrvTableA table containing information about config servers. SEQUENCE OF RlSntpNtpConfigSrvEntry .1.3.6.1.4.1.89.92.2.1.16 |
rlSntpNtpConfigSrvEntryEntry in rlSntpNtpConfigSrvTable. RlSntpNtpConfigSrvEntry .1.3.6.1.4.1.89.92.2.1.16.1 |
rlSntpNtpConfigSrvEntryTypeServer type: Synchronize Server or Primary Poll Server. RlSntpNtpSyncEntryType .1.3.6.1.4.1.89.92.2.1.16.1.1 |
rlSntpNtpConfigSrvInetAddressTypeServer inet address type.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.1.16.1.2 |
rlSntpNtpConfigSrvInetAddressServer inet address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.1.16.1.3 |
rlSntpNtpConfigSrvMridThe mrid of the server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.16.1.4 |
rlSntpNtpConfigSrvIfIndexThe interface addressed of the server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.16.1.5 |
rlSntpNtpConfigSrvSyncTypeThe type of synchronization.ro RlSntpNtpSyncType .1.3.6.1.4.1.89.92.2.1.16.1.6 |
rlSntpNtpConfigSrvStratumThe stratum of the synced server.ro NTPStratum .1.3.6.1.4.1.89.92.2.1.16.1.7 |
rlSntpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.2.2 |
rlSntpClientModeCurrent operational mode of SNTP client.ro Enumeration .1.3.6.1.4.1.89.92.2.2.1 |
rlSntpUnicastAdminStateSNTP Unicast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled.rw Enumeration .1.3.6.1.4.1.89.92.2.2.2 |
rlSntpBroadcastAdminStateSNTP Broadcast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled.rw Enumeration .1.3.6.1.4.1.89.92.2.2.3 |
rlSntpAnycastAdminStateSNTP Anycast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled.rw Enumeration .1.3.6.1.4.1.89.92.2.2.4 |
rlSntpUnicastPollStateSNTP Unicast poll state - TRUE for polled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.5 |
rlSntpBroadcastPollStateSNTP Broadcast poll state - TRUE for polled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.6 |
rlSntpAnycastPollStateSNTP Anycast poll state - TRUE for polled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.7 |
rlSntpAuthenticationStateSNTP authentication state- Enable/Disable SNTP.rw Enumeration .1.3.6.1.4.1.89.92.2.2.8 |
rlTimeValidFlagIs time valid.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.9 |
rlSntpConfigBroadcastTableA table containing broadcast mode information per interface. SEQUENCE OF RlSntpBroadcastEntry .1.3.6.1.4.1.89.92.2.2.10 |
rlSntpBroadcastEntryPrivate paramters for interface: sntp status, broadcast mode. RlSntpBroadcastEntry .1.3.6.1.4.1.89.92.2.2.10.1 |
rlSntpBroadcastIfIndexThe interface addressed by this entry. INTEGER .1.3.6.1.4.1.89.92.2.2.10.1.1 |
rlSntpBroadcastIfAdminStateSNTP interface Adminstrative state- Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled.rw Enumeration .1.3.6.1.4.1.89.92.2.2.10.1.2 |
rlSntpBroadcastModeSNTP/NTP Broadcast Mode. none - no broadcast SNTP packets are received or sent. Receive - host only receive SNTP packets that were sent to broadcast address (were not directed to the host). This is multicast mode in the RFC. Send - host only send SNTP packets and wait for replies directed to the host. This is anycast mode in the RFC. ReceiveSend - host receive broadcast messages (destination is broadcast address in the received messages) and send SNTP packets to wait for replies directed to the host (destination address of the reply is the host address). This mode combines anycast and multicast modes in the RFC.rw Enumeration .1.3.6.1.4.1.89.92.2.2.10.1.3 |
rlSntpBroadcastPolledTRUE if participating in polling cycle, else FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.10.1.4 |
rlSntpBroadcastAddressIp Address of a trusted SNTP server.ro IpAddress .1.3.6.1.4.1.89.92.2.2.10.1.5 |
rlSntpBroadcastStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.10.1.6 |
rlSntpBroadcastLastRespSNTP Broadcast Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.10.1.7 |
rlSntpBroadcastStatusThe Operational State of the remote IP Address of the SNTP Broadcast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.10.1.8 |
rlSntpBroadcastOffsetThe estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.10.1.9 |
rlSntpBroadcastDelayThe estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.10.1.10 |
rlSntpBroadcastRowStatusThe Status of this SNTP broadcast interface information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.10.1.11 |
rlSntpConfigAnycastTableA table containing anycast information per interface. SEQUENCE OF RlSntpAnycastEntry .1.3.6.1.4.1.89.92.2.2.11 |
rlSntpAnycastEntryPrivate paramters for interface: server info. RlSntpAnycastEntry .1.3.6.1.4.1.89.92.2.2.11.1 |
rlSntpAnycastIfIndexThe interface addressed by this entry. INTEGER .1.3.6.1.4.1.89.92.2.2.11.1.1 |
rlSntpAnycastAddressIp Address of a trusted SNTP server.ro IpAddress .1.3.6.1.4.1.89.92.2.2.11.1.2 |
rlSntpAnycastStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.11.1.3 |
rlSntpAnycastLastRespSNTP Anycast Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.11.1.4 |
rlSntpAnycastStatusThe Operational State of the remote IP Address of the SNTP Anycast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.11.1.5 |
rlSntpAnycastOffsetThe estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.11.1.6 |
rlSntpAnycastDelayThe estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.11.1.7 |
rlSntpAnycastRowStatusThe Status of this SNTP anycast interface information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.11.1.8 |
rlSntpConfigServerTableA table containing trusted SNTP servers to be queried in unicast or broadcast mode. SEQUENCE OF RlSntpServerEntry .1.3.6.1.4.1.89.92.2.2.12 |
rlSntpServerEntryA trusted server. RlSntpServerEntry .1.3.6.1.4.1.89.92.2.2.12.1 |
rlSntpServerAddressIp Address of a trusted SNTP server. IpAddress .1.3.6.1.4.1.89.92.2.2.12.1.1 |
rlSntpServerPolledTRUE if participating in polling cycle, else FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.12.1.2 |
rlSntpServerStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.12.1.3 |
rlSntpServerLastRespSNTP Server Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.12.1.4 |
rlSntpServerStatusThe Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.12.1.5 |
rlSntpServersOffsetThe estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.12.1.6 |
rlSntpServersDelayThe estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.12.1.7 |
rlSntpServersKeyIdentifierAuthentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done.rw Unsigned32 .1.3.6.1.4.1.89.92.2.2.12.1.8 |
rlSntpServerRowStatusThe Status of this SNTP server information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.12.1.9 |
rlSntpConfigAuthenticationTableA table authentication keys. SEQUENCE OF RlSntpAuthenticationEntry .1.3.6.1.4.1.89.92.2.2.13 |
rlSntpAuthenticationEntryKeys information for authenticationof NTP packets. RlSntpAuthenticationEntry .1.3.6.1.4.1.89.92.2.2.13.1 |
rlSntpAuthenticationKeyIDThe key identifier. Valid rabge for key identifier is 1-4294967295.rw Unsigned32 .1.3.6.1.4.1.89.92.2.2.13.1.1 |
rlSntpAuthenticationKeyValueKey value.rw DisplayString .1.3.6.1.4.1.89.92.2.2.13.1.2 |
rlSntpAuthenticationKeyStateAuthentication key state - Enable/Disable key.rw Enumeration .1.3.6.1.4.1.89.92.2.2.13.1.3 |
rlSntpAuthenticationRowStatusThe Status of this Authentication key information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.13.1.4 |
rlSntpPortUser defined SNTP port.rw INTEGER (1.. 65535) .1.3.6.1.4.1.89.92.2.2.14 |
rlSntpConfigBroadcastInetTableA table containing broadcast mode information per interface. SEQUENCE OF RlSntpBroadcastInetEntry .1.3.6.1.4.1.89.92.2.2.15 |
rlSntpBroadcastInetEntryPrivate paramters for interface: sntp status, broadcast mode. RlSntpBroadcastInetEntry .1.3.6.1.4.1.89.92.2.2.15.1 |
rlSntpBroadcastInetIfIndexThe interface addressed by this entry. INTEGER .1.3.6.1.4.1.89.92.2.2.15.1.1 |
rlSntpBroadcastInetIfAdminStateSNTP interface Adminstrative state- Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled.rw Enumeration .1.3.6.1.4.1.89.92.2.2.15.1.2 |
rlSntpBroadcastInetModeSNTP/NTP Broadcast Mode. none - no broadcast SNTP packets are received or sent. Receive - host only receive SNTP packets that were sent to broadcast address (were not directed to the host). This is multicast mode in the RFC. Send - host only send SNTP packets and wait for replies directed to the host. This is anycast mode in the RFC. ReceiveSend - host receive broadcast messages (destination is broadcast address in the received messages) and send SNTP packets to wait for replies directed to the host (destination address of the reply is the host address). This mode combines anycast and multicast modes in the RFC.rw Enumeration .1.3.6.1.4.1.89.92.2.2.15.1.3 |
rlSntpBroadcastInetPolledTRUE if participating in polling cycle, else FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.15.1.4 |
rlSntpBroadcastInetAddressTypeInet Address Type of a trusted SNTP server.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.2.15.1.5 |
rlSntpBroadcastInetAddressInet Address of a trusted SNTP server.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.2.15.1.6 |
rlSntpBroadcastInetStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.15.1.7 |
rlSntpBroadcastInetLastRespSNTP Broadcast Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.15.1.8 |
rlSntpBroadcastInetStatusThe Operational State of the remote IP Address of the SNTP Broadcast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.15.1.9 |
rlSntpBroadcastInetOffsetThe estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.15.1.10 |
rlSntpBroadcastInetDelayThe estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.15.1.11 |
rlSntpBroadcastInetRowStatusThe Status of this SNTP broadcast interface information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.15.1.12 |
rlSntpConfigAnycastInetTableA table containing anycast information per interface. SEQUENCE OF RlSntpAnycastInetEntry .1.3.6.1.4.1.89.92.2.2.16 |
rlSntpAnycastInetEntryPrivate paramters for interface: server info. RlSntpAnycastInetEntry .1.3.6.1.4.1.89.92.2.2.16.1 |
rlSntpAnycastInetIfIndexThe interface addressed by this entry. INTEGER .1.3.6.1.4.1.89.92.2.2.16.1.1 |
rlSntpAnycastInetAddressTypeInet Address Type of a trusted SNTP server.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.2.16.1.2 |
rlSntpAnycastInetAddressInet Address of a trusted SNTP server.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.2.16.1.3 |
rlSntpAnycastInetStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.16.1.4 |
rlSntpAnycastInetLastRespSNTP Anycast Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.16.1.5 |
rlSntpAnycastInetStatusThe Operational State of the remote IP Address of the SNTP Anycast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.16.1.6 |
rlSntpAnycastInetOffsetThe estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.16.1.7 |
rlSntpAnycastInetDelayThe estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.16.1.8 |
rlSntpAnycastInetRowStatusThe Status of this SNTP anycast interface information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.16.1.9 |
rlSntpConfigServerInetTableA table containing trusted SNTP servers to be queried in unicast or broadcast mode. SEQUENCE OF RlSntpServerInetEntry .1.3.6.1.4.1.89.92.2.2.17 |
rlSntpServerInetEntryA trusted server. RlSntpServerInetEntry .1.3.6.1.4.1.89.92.2.2.17.1 |
rlSntpServerInetAddressTypeInet Address Type of a trusted SNTP server. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.2.17.1.1 |
rlSntpServerInetAddressInet Address of a trusted SNTP server. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.2.17.1.2 |
rlSntpServerInetPolledTRUE if participating in polling cycle, else FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.17.1.3 |
rlSntpServerInetStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.17.1.4 |
rlSntpServerInetLastRespSNTP Server Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.17.1.5 |
rlSntpServerInetStatusThe Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.17.1.6 |
rlSntpServerInetOffsetThe estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.17.1.7 |
rlSntpServerInetDelayThe estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.17.1.8 |
rlSntpServerInetKeyIdentifierAuthentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done.rw Unsigned32 .1.3.6.1.4.1.89.92.2.2.17.1.9 |
rlSntpServerInetRowStatusThe Status of this SNTP server information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.17.1.10 |
rlSntpAllServerInetTableA table containing all SNTP servers (for example: statically configured, dynamically configured) to be queried in unicast or broadcast mode. SEQUENCE OF RlSntpAllServerInetEntry .1.3.6.1.4.1.89.92.2.2.18 |
rlSntpAllServerInetEntryA server entry. RlSntpAllServerInetEntry .1.3.6.1.4.1.89.92.2.2.18.1 |
rlSntpAllServerSourceThe SNTP server source: static means manually defined, dhcpv6 means learnt from DHCP. Only static entries are stored in CDB. Enumeration .1.3.6.1.4.1.89.92.2.2.18.1.1 |
rlSntpAllServerIfIndexThe ifIndex from which the SNTP server configuration was received (for dhcpv6 configurations). For static entries the value of this field will always be 1. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.92.2.2.18.1.2 |
rlSntpAllServerPreferenceThe preference of SNTP server (for dhcpv6 configurations). For static entries the value of this field will always be 0. INTEGER .1.3.6.1.4.1.89.92.2.2.18.1.3 |
rlSntpAllServerInetAddressTypeSNTP server inet address type. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.2.18.1.4 |
rlSntpAllServerInetAddressSNTP server inet address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.92.2.2.18.1.5 |
rlSntpAllServerInetPolledTRUE if participating in polling cycle, else FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.18.1.6 |
rlSntpAllServerInetStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.18.1.7 |
rlSntpAllServerInetLastRespSNTP Server Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.18.1.8 |
rlSntpAllServerInetStatusThe Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.18.1.9 |
rlSntpAllServerInetOffsetThe estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.18.1.10 |
rlSntpAllServerInetDelayThe estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.18.1.11 |
rlSntpAllServerInetKeyIdentifierAuthentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done.rw Unsigned32 .1.3.6.1.4.1.89.92.2.2.18.1.12 |
rlSntpRestoreDefaultServersSetting this scalar to true restores sntp default unicast servers. Meaning: all manually configured servers are deleted, and the default SNTP servers are recreated with their default values. This is an 'action' scalar.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.19 |
rlNtpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.2.3 |