Dell-TBI-MIB
Imported Objects
Objects
15 total| Object Name |
|---|
rlTBIMibTime Range Infrastructure MIBs initial version. MODULE-IDENTITY .1.3.6.1.4.1.89.145 |
rlTBITimeRangeTableThis table specifies Time Based Infra table SEQUENCE OF RlTBITimeRangeEntry .1.3.6.1.4.1.89.145.1 |
rlTBITimeRangeEntryEach entry in this table describes the new time range for ACE. The index is time range name RlTBITimeRangeEntry .1.3.6.1.4.1.89.145.1.1 |
rlTBITimeRangeNameName of time range. DisplayString .1.3.6.1.4.1.89.145.1.1.1 |
rlTBITimeRangeAbsoluteStartTime of start of absolute time range in following format: month day year hh:mm month: 01-12 (January-December) day: 01-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes)rw DisplayString .1.3.6.1.4.1.89.145.1.1.2 |
rlTBITimeRangeAbsoluteEndTime of end of absolute time range in following format: month day year hh:mm month: 01-12 (January-December) day: 01-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes)rw DisplayString .1.3.6.1.4.1.89.145.1.1.3 |
rlTBITimeRangeActiveStatusShows whether the current time range is active according to the current clock.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.145.1.1.4 |
rlTBITimeRangeRowStatusRow Status. It is used for adding/deleting entries of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.145.1.1.5 |
rlTBIPeriodicTableThis table specifies Time Based Infra Periodic table SEQUENCE OF RlTBIPeriodicEntry .1.3.6.1.4.1.89.145.2 |
rlTBIPeriodicEntryEach entry in this table describes periodic time range. RlTBIPeriodicEntry .1.3.6.1.4.1.89.145.2.1 |
rlTBIPeriodicTimeRangeNameTime Range Name the periodic is defined on. DisplayString .1.3.6.1.4.1.89.145.2.1.1 |
rlTBIPeriodicWeekDayListThe bitmap allows to user to select periodic time range for several days at once. The periodic range will be associated with specific days when corresponding bits will be set. If at least one bit has been set in the rlTBIPeriodicWeekDayList, the weekday in rlTBIPeriodicStart and rlTBIPeriodicEnd is not relevant and should be set to zero.rw RlTBIWeekDayList .1.3.6.1.4.1.89.145.2.1.2 |
rlTBIPeriodicStartTime of start of periodic time range in following format: weekday hh:mm weekday: 0-7 (0 means the weekday is not specified, 1-7 are weekdays from Monday to Sunday) hh: 0-23 (hours) mm: 0-59 (minutes) Weekday may be 0 only if periodic time range weekdays were specified in rlTBIPeriodicWeekDayList.rw DisplayString .1.3.6.1.4.1.89.145.2.1.3 |
rlTBIPeriodicEndTime of end of periodic time range in following format: weekday hh:mm weekday: 0-7 (0 means the weekday is not specified, 1-7 are weekdays from Monday to Sunday) hh: 0-23 (hours) mm: 0-59 (minutes) Weekday may be 0 only if periodic time range weekdays were specified in rlTBIPeriodicWeekDayList.rw DisplayString .1.3.6.1.4.1.89.145.2.1.4 |
rlTBIPeriodicRowStatusRow Status. It is used for adding/deleting entries of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.145.2.1.5 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.