Home/Catalog/Dell-POE-MIB

Dell-POE-MIB

Add a new field in the PoE MIB to indicate Max power allocation allowed

Main OID:

rlPoe.1.3.6.1.4.1.89.108

Objects

Active

Status

Dependencies

Imported Objects

Dell-MIB

SNMPv2-TC

SNMPv2-SMI

Objects

34 total

Object Name	Syntax	OID
rlPoeAdd a new field in the PoE MIB to indicate Max power allocation allowed MODULE-IDENTITY `.1.3.6.1.4.1.89.108`	MODULE-IDENTITY	`.1.3.6.1.4.1.89.108`
rlPethPsePortTableThe table listing additional information for Power Over Ethernet ports. SEQUENCE OF RlPethPsePortEntry `.1.3.6.1.4.1.89.108.1`	SEQUENCE OF RlPethPsePortEntry	`.1.3.6.1.4.1.89.108.1`
rlPethPsePortEntryAn entry in the rlPethPsePortTable. RlPethPsePortEntry `.1.3.6.1.4.1.89.108.1.1`	RlPethPsePortEntry	`.1.3.6.1.4.1.89.108.1.1`
rlPethPsePortGroupIndexThis variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. INTEGER `.1.3.6.1.4.1.89.108.1.1.1`	INTEGER	`.1.3.6.1.4.1.89.108.1.1.1`
rlPethPsePortIndexThis variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected. INTEGER `.1.3.6.1.4.1.89.108.1.1.2`	INTEGER	`.1.3.6.1.4.1.89.108.1.1.2`
rlPethPsePortOutputVoltageThis variable indicates on the output voltage level in milli volts from rlPethPsePortIndex.ro INTEGER `.1.3.6.1.4.1.89.108.1.1.3`	INTEGER	`.1.3.6.1.4.1.89.108.1.1.3`
rlPethPsePortOutputCurrentThis variable indicates on the output current level in milli amper from rlPethPsePortIndex.ro INTEGER `.1.3.6.1.4.1.89.108.1.1.4`	INTEGER	`.1.3.6.1.4.1.89.108.1.1.4`
rlPethPsePortOutputPowerThis variable indicates on the output power level in milli watts from rlPethPsePortIndex.ro INTEGER `.1.3.6.1.4.1.89.108.1.1.5`	INTEGER	`.1.3.6.1.4.1.89.108.1.1.5`
rlPethPsePortPowerLimitThis variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex.rw INTEGER `.1.3.6.1.4.1.89.108.1.1.6`	INTEGER	`.1.3.6.1.4.1.89.108.1.1.6`
rlPethPsePortStatusThis variable indicates on the hardware status of rlPethPsePortIndex.ro INTEGER `.1.3.6.1.4.1.89.108.1.1.7`	INTEGER	`.1.3.6.1.4.1.89.108.1.1.7`
rlPethPsePortStatusDescriptionThis variable indicates the description of the hardware status of rlPethPsePortIndex.ro DisplayString `.1.3.6.1.4.1.89.108.1.1.8`	DisplayString	`.1.3.6.1.4.1.89.108.1.1.8`
rlPethPsePortOperPowerLimitThis variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex.ro INTEGER `.1.3.6.1.4.1.89.108.1.1.9`	INTEGER	`.1.3.6.1.4.1.89.108.1.1.9`
rlPethPsePortSupportPoePlusThis variable indicates if the port supports poe plus.ro TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.108.1.1.10`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.108.1.1.10`
rlPethPsePortTimeRangeNameThis variable is used to bind PoE port to time range.rw DisplayString `.1.3.6.1.4.1.89.108.1.1.11`	DisplayString	`.1.3.6.1.4.1.89.108.1.1.11`
rlPethPsePortOperStatusThis Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status.ro TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.108.1.1.12`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.108.1.1.12`
rlPethPsePortMaxPowerAllocAllowedThis variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex.ro INTEGER `.1.3.6.1.4.1.89.108.1.1.13`	INTEGER	`.1.3.6.1.4.1.89.108.1.1.13`
rlPethPsePortSupportPoeThis variable indicates if the port is a poe portro TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.89.108.1.1.14`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.89.108.1.1.14`
rlPethMainPseTableThe table listing additional read - only information for Power Over Ethernet. SEQUENCE OF RlPethMainPseEntry `.1.3.6.1.4.1.89.108.2`	SEQUENCE OF RlPethMainPseEntry	`.1.3.6.1.4.1.89.108.2`
rlPethMainPseEntryAn entry in the rlPethMainPseTable. RlPethMainPseEntry `.1.3.6.1.4.1.89.108.2.1`	RlPethMainPseEntry	`.1.3.6.1.4.1.89.108.2.1`
rlPethMainPseGroupIndexThis variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. INTEGER `.1.3.6.1.4.1.89.108.2.1.1`	INTEGER	`.1.3.6.1.4.1.89.108.2.1.1`
rlPethMainPseSwVersionThis variable identifies the MCU SW version.ro DisplayString `.1.3.6.1.4.1.89.108.2.1.2`	DisplayString	`.1.3.6.1.4.1.89.108.2.1.2`
rlPethMainPseHwVersionThis variable identifies the MCU HW version.ro DisplayString `.1.3.6.1.4.1.89.108.2.1.3`	DisplayString	`.1.3.6.1.4.1.89.108.2.1.3`
rlPethMainPseHwTypeThis variable identifies the MCU HW type (enhanced, plus, none).ro Enumeration `.1.3.6.1.4.1.89.108.2.1.4`	Enumeration	`.1.3.6.1.4.1.89.108.2.1.4`
rlPethMainPsePowerGuardBandThis variable identifies the guard band in [W] for not connecting additional ports.ro INTEGER `.1.3.6.1.4.1.89.108.2.1.5`	INTEGER	`.1.3.6.1.4.1.89.108.2.1.5`
rlPethPowerPseTableThe table listing additional read-write information for Power Over Ethernet. SEQUENCE OF RlPethPowerPseEntry `.1.3.6.1.4.1.89.108.3`	SEQUENCE OF RlPethPowerPseEntry	`.1.3.6.1.4.1.89.108.3`
rlPethPowerPseEntryAn entry in the rlPethPowerPseTable. RlPethPowerPseEntry `.1.3.6.1.4.1.89.108.3.1`	RlPethPowerPseEntry	`.1.3.6.1.4.1.89.108.3.1`
rlPethPowerPseGroupIndexThis variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, PethPowerPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. INTEGER `.1.3.6.1.4.1.89.108.3.1.1`	INTEGER	`.1.3.6.1.4.1.89.108.3.1.1`
rlPethPowerPsePowerThis variable identifies the maximum power in [W] supplied by PSE.rw Enumeration `.1.3.6.1.4.1.89.108.3.1.2`	Enumeration	`.1.3.6.1.4.1.89.108.3.1.2`
rlPethPowerPseRpsPowerThis variable identifies the maximum power in [W] supplied by PSE + RPS.rw Enumeration `.1.3.6.1.4.1.89.108.3.1.3`	Enumeration	`.1.3.6.1.4.1.89.108.3.1.3`
rlPethPowerPsePowerManagementModeThis variable identifies power management mode.rw Enumeration `.1.3.6.1.4.1.89.108.3.1.4`	Enumeration	`.1.3.6.1.4.1.89.108.3.1.4`
rlPethPowerPsedisconnectMethodThis variable identifies disconnect method.rw Enumeration `.1.3.6.1.4.1.89.108.3.1.5`	Enumeration	`.1.3.6.1.4.1.89.108.3.1.5`
rlPethPowerPseTemperatureSensorThis variable identifies the pd temperature sensor.ro INTEGER (-200..200) `.1.3.6.1.4.1.89.108.3.1.6`	INTEGER (-200..200)	`.1.3.6.1.4.1.89.108.3.1.6`
rlPethPowerPseInrushTestEnabledThis variable identifies if HW inrush test will be disabled. by default HW inrush test is enabled.rw Enumeration `.1.3.6.1.4.1.89.108.3.1.7`	Enumeration	`.1.3.6.1.4.1.89.108.3.1.7`
rlPethPowerPseLegacyDisabledThis variable identifies poe Legacy global configuration moderw Enumeration `.1.3.6.1.4.1.89.108.3.1.8`	Enumeration	`.1.3.6.1.4.1.89.108.3.1.8`

More MIBs from Rnd

Browse all RndMIBs →

RADLAN-MIB

Standard SNMP MIB module defining data structures for RADLAN-MIB.

651 objects→

RADWARE-MIB

Standard SNMP MIB module defining data structures for RADWARE-MIB.

604 objects→

RADLAN-IPV6FHS-MIB

The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.

SNMP MIB module

SNMP MIB module

The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.

369 objects→