Dell-MNGINF-MIB
The private MIB module definition for management access control.
Main OID:
rlMngInf.1.3.6.1.4.1.89.89
27
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
rlMngInfThe private MIB module definition for management access control. MODULE-IDENTITY .1.3.6.1.4.1.89.89 |
rlMngInfMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.89.1 |
rlMngInfEnableThe variable specifies if Management ACL functionality is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.89.2 |
rlMngInfActiveListNameThe currently activated Management ACL namerw DisplayString .1.3.6.1.4.1.89.89.3 |
rlMngInfListTableThe table specifies all defined Access Lists definitions for IPv4 addresses. Provide backward compatibility for previous versions. SEQUENCE OF RlMngInfListEntry .1.3.6.1.4.1.89.89.4 |
rlMngInfListEntryRow definition for this table. RlMngInfListEntry .1.3.6.1.4.1.89.89.4.1 |
rlMngInfListNameThe Name of the Access List.ro DisplayString .1.3.6.1.4.1.89.89.4.1.1 |
rlMngInfListPriorityThe Priority value.ro Unsigned32 .1.3.6.1.4.1.89.89.4.1.2 |
rlMngInfListIfIndexThe IfIndex value. The IfIndex can be configured to be 0, which means don't care value.rw Unsigned32 .1.3.6.1.4.1.89.89.4.1.3 |
rlMngInfListIpAddrThe IP address. The IP address can be configured to be 0, which means don't care value.rw IpAddress .1.3.6.1.4.1.89.89.4.1.4 |
rlMngInfListIpNetMaskThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.89.89.4.1.5 |
rlMngInfListServiceService type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH.rw RlMngInfServiceType .1.3.6.1.4.1.89.89.4.1.6 |
rlMngInfListActionAction type. Can be permit or deny.rw RlMngInfActionType .1.3.6.1.4.1.89.89.4.1.7 |
rlMngInfListRowStatusThe row status variable, used according to row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.89.4.1.8 |
rlMngInfAuditingEnableControls whether SysLog messages should be issued on reject by rulerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.89.5 |
rlMngInfListInetTableThe table specifies all defined Access Lists definitions definitions for both IPv4 and IPv6 addresses. SEQUENCE OF RlMngInfListInetEntry .1.3.6.1.4.1.89.89.6 |
rlMngInfListInetEntryRow definition for this table. RlMngInfListInetEntry .1.3.6.1.4.1.89.89.6.1 |
rlMngInfListInetNameThe Name of the Access List.ro DisplayString .1.3.6.1.4.1.89.89.6.1.1 |
rlMngInfListInetPriorityThe Priority value.ro Unsigned32 .1.3.6.1.4.1.89.89.6.1.2 |
rlMngInfListInetIfIndexThe IfIndex value. The IfIndex can be configured to be 0, which means don't care value.rw Unsigned32 .1.3.6.1.4.1.89.89.6.1.3 |
rlMngInfListInetIpAddrTypeThe Inet address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.89.6.1.4 |
rlMngInfListInetIpAddrThe Inet address.Used for both IPv4 and IPv6 addresses. The InetIpAddress can be configured to be 0.0.0.0 and address type IPv4 , which means ignored value.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.89.6.1.5 |
rlMngInfListInetIpNetMaskThis field will used in case of IPv4 addresses . For IPv6 this field ignored. Default value 255.255.255.255.rw IpAddress .1.3.6.1.4.1.89.89.6.1.6 |
rlMngInfListInetServiceService type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH.rw RlMngInfServiceType .1.3.6.1.4.1.89.89.6.1.7 |
rlMngInfListInetActionAction type. Can be permit or deny.rw RlMngInfActionType .1.3.6.1.4.1.89.89.6.1.8 |
rlMngInfListInetRowStatusThe row status variable, used according to row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.89.6.1.9 |
rlMngInfListInetIPv6PrefixLengthIPv6 prefix length.This field provide IPv6 prefix length (mask) for IPv6 only.In case of IPv4 this field will ignoredrw INTEGER (0.. 128) .1.3.6.1.4.1.89.89.6.1.10 |