Dell-File
The Dell-File MIB module enables SNMP-based monitoring and management of file system statistics, including storage capacity, usage metrics, and file system states, specifically on Dell MTS software and hardware platforms. It facilitates the collection of critical disk utilization and file system health data for capacity planning and alerting within Dell enterprise storage environments.
Imported Objects
Objects
21 total| Object Name |
|---|
rlFileThe MIB module describes the private MIB for File Private Extension supported by Dell MTS software and products. MODULE-IDENTITY .1.3.6.1.4.1.89.96 |
rlFileMibVersionIndicates the File System MIB version. The current version is 1.ro INTEGER .1.3.6.1.4.1.89.96.1 |
rlFileTableThe (conceptual) table listing all the files of the flash file system. SEQUENCE OF RlFileEntry .1.3.6.1.4.1.89.96.2 |
rlFileEntryAn entry (conceptual row) in the FileTable. RlFileEntry .1.3.6.1.4.1.89.96.2.1 |
rlFileNameThe name of the file.rw OCTET STRING .1.3.6.1.4.1.89.96.2.1.1 |
rlFilePermissionSpecifies the permission level in which this file can be accessed.ro Enumeration .1.3.6.1.4.1.89.96.2.1.2 |
rlFileSizeThe size of the file in bytes (actual size).ro INTEGER .1.3.6.1.4.1.89.96.2.1.3 |
rlFileModificationDateThe time-stamp indicating the date of creation or last modification of this file. The format of the time-stamp is dd-mmm-yyyyro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.96.2.1.4 |
rlFileModificationTimeThe time-stamp indicating the time of creation or last modification of this file. The format of the time-stamp is hh:mm:ssro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.96.2.1.5 |
rlFileRowStatusIt is used just to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.96.2.1.6 |
rlFileFlashSizeThe size allocated for the file in bytes (allocated size).ro INTEGER .1.3.6.1.4.1.89.96.2.1.7 |
rlFileFullNormalizedNameThe full normalized name - up to max OCTET STRING length and not containing '..' and '.' path components.ro OCTET STRING .1.3.6.1.4.1.89.96.2.1.8 |
rlFileActionTableThe (conceptual) table listing only one entry at a time with parameters needed for performing an action on a file. SEQUENCE OF RlFileActionEntry .1.3.6.1.4.1.89.96.3 |
rlFileActionEntryAn entry (conceptual row) in the FileActionTable. RlFileActionEntry .1.3.6.1.4.1.89.96.3.1 |
rlFileActionNameThe name of the file.rw OCTET STRING .1.3.6.1.4.1.89.96.3.1.1 |
rlFileActionNewNameThe new name for the file (in case of action rename).rw OCTET STRING .1.3.6.1.4.1.89.96.3.1.2 |
rlFileActionRowStatusIt is used to create an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.96.3.1.3 |
rlFileActionCommandPerform an action on the file.rw Enumeration .1.3.6.1.4.1.89.96.3.1.4 |
rlFileTotalSizeOfFlashIndicates the total size of the flash in bytes.ro INTEGER .1.3.6.1.4.1.89.96.4 |
rlFileFreeSizeOfFlashIndicates the number of free bytes in the flash.ro INTEGER .1.3.6.1.4.1.89.96.5 |
rlFileAuditingEnableControls whether SysLog messages should be issued on file rename/delete eventsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.96.6 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.