Dell-ERRDISABLE-RECOVERY-MIB
The Dell-ERRDISABLE-RECOVERY-MIB manages the automatic recovery configuration and status of ports placed in an errdisabled state on Dell networking equipment. It exposes metrics for recovery timers, enabled recovery causes, and the current operational state of the errdisable recovery process to facilitate automated port restoration.
Imported Objects
Objects
10 total| Object Name |
|---|
rlErrdisableRecoveryThe private MIB module definition for Errdisable Recovery MIB. MODULE-IDENTITY .1.3.6.1.4.1.89.128 |
rlErrdisableRecoveryIntervalTimeout interval in seconds for automatic activation of an interface after shutdown.rw INTEGER .1.3.6.1.4.1.89.128.1 |
rlErrdisableRecoveryCauseTableThe table is used to enable or disable auto-recovery for specific application causes port suspend. The table includes entries for all applications. SEQUENCE OF RlErrdisableRecoveryCauseEntry .1.3.6.1.4.1.89.128.2 |
rlErrdisableRecoveryCauseEntryAn entry (conceptual row) in the rlErrdisableRecoveryCauseEntry. RlErrdisableRecoveryCauseEntry .1.3.6.1.4.1.89.128.2.1 |
rlErrdisableRecoveryCauseType of recovery cause. RlErrdisableRecoveryCauseType .1.3.6.1.4.1.89.128.2.1.1 |
rlErrdisableRecoveryEnableEnable/Disable automatic recovery.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.128.2.1.2 |
rlErrdisableRecoveryIfTableThe table is used for show the reason of shutdown the port in errdisable state. The table includes only suspended interfaces. SEQUENCE OF RlErrdisableRecoveryIfEntry .1.3.6.1.4.1.89.128.3 |
rlErrdisableRecoveryIfEntryAn entry (conceptual row) in the rlErrdisableRecoveryIfEntry. RlErrdisableRecoveryIfEntry .1.3.6.1.4.1.89.128.3.1 |
rlErrdisableRecoveryIfReasonThe reason of shutdown the port in errdisable state.ro RlErrdisableRecoveryCauseType .1.3.6.1.4.1.89.128.3.1.1 |
rlErrdisableRecoveryIfEnableEnable/Disable automatic recovery status.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.128.3.1.2 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.