Dell-BANNER-MIB
The Dell-BANNER-MIB module manages the configuration and retrieval of dynamic login banner messages on Dell switching devices, enabling the display of customizable text with formatting attributes (bold, inverse, blink) and variable substitution across Telnet, SSH, and Console authentication sessions.
Imported Objects
Objects
12 total| Object Name |
|---|
rlBannerThe private MIB module definition for Banner displays messages in Dell switching devices. Banner allows users to configure display messages which are displayed on various authentication events. Banner Messages can hold dynamic data such as $(hostname) or $(domain) etc, and display instructions such as: bold, inverse, or blink. Banner Messages can be displayed or hidden with respect to the connection type: via Telnet, SSH or the Console. MODULE-IDENTITY .1.3.6.1.4.1.89.133 |
rlBannerMessageTableThe table listing the Banner content. SEQUENCE OF RlBannerMessageEntry .1.3.6.1.4.1.89.133.1 |
rlBannerMessageEntryAn entry in the rlBannerMessageTable. RlBannerMessageEntry .1.3.6.1.4.1.89.133.1.1 |
rlBannerMessageTypeThis variable identifies the Banner type. There are three types: MOTD, Login and Exec. BannerMessageType .1.3.6.1.4.1.89.133.1.1.1 |
rlBannerMessageIndexThis variable identifies a Banner string section in the Banner content. The Banner content is limited to 2000 characters. Content is divided into 13 indexed sections. Each section contains 160 octets, except the last used section which can contain less than 160 octets. Once a section of the Banner string contains 160 octets of data, the user can write to the next index. Overwriting is not supported. To delete all Banner content, use the rlBannerMessageClear MIB. INTEGER .1.3.6.1.4.1.89.133.1.1.2 |
rlBannerMessageTextThis variable identifies the MIB which holds a section of the Banner content in the table.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.89.133.1.1.3 |
rlBannerManageTableThe table listing specifying for each connection type which Banner should, or should not be displayed. SEQUENCE OF RlBannerManageEntry .1.3.6.1.4.1.89.133.2 |
rlBannerManageEntryAn entry in the rlBannerManageTable. RlBannerManageEntry .1.3.6.1.4.1.89.133.2.1 |
rlBannerManageSSHThis variable specifies whether the banner type specified in the key should or should not be displayed when a user accesses the device via SSH.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.89.133.2.1.1 |
rlBannerManageTelnetThis variable specifies whether the banner type specified in the key should or should not be displayed when a user accesses the device via Telnet.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.89.133.2.1.2 |
rlBannerManageConsoleThis variable specifies whether the banner type specified in the key should or should not be displayed when a user accesses the device via Console.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.89.133.2.1.3 |
rlBannerMessageClearThis value, when set, clears the selected Banner type. Clearing the Banner type means that the related entry from rlBannerMessageTable is removed.rw BannerMessageType .1.3.6.1.4.1.89.133.3 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.