DT1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DT1-MIB.
53
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
dt1 OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.3 |
dt1Id OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.3.1 |
dt1IdTableA table that contains information that identifies the
hardware and software that make up the specified dual T1
card. SEQUENCE OF Dt1IdEntry .1.3.6.1.4.1.429.1.3.1.1 |
dt1IdEntryThere is one entry in this table for every dual T1 card in
the chassis. Dt1IdEntry .1.3.6.1.4.1.429.1.3.1.1.1 |
dt1IdIndexAn index that uniquely identifies the dual T1 card for
which this row in the table pertains. The value of this
index matches the value of the index for the corresponding
entity in the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.3.1.1.1.1 |
dt1IdHardwareSerNumThe dual T1 card's hardware serial number as stored in
EEPROM.ro DisplayString .1.3.6.1.4.1.429.1.3.1.1.1.2 |
dt1IdHardwareRevThe hardware revision of the specified dual T1 card as
stored in its EEPROM.ro DisplayString .1.3.6.1.4.1.429.1.3.1.1.1.3 |
dt1IdSoftwareRevThe revision of the software being executed in the
specified dual T1 card.ro DisplayString .1.3.6.1.4.1.429.1.3.1.1.1.4 |
dt1Cfg OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.3.2 |
dt1CfgTableThe Dual T1 Card Configuration Table contains an entry for
each of the manageable Dual T1 Cards in the chassis. It
contains objects that reflect the current configuration of
parameters that affect the operation of all the entities
that reside on the given card. SEQUENCE OF Dt1CfgEntry .1.3.6.1.4.1.429.1.3.2.1 |
dt1CfgEntryThere is one Dual T1 Card Configuration table entry per
Dual T1 Card in the chassis. Dt1CfgEntry .1.3.6.1.4.1.429.1.3.2.1.1 |
dt1CfgIndexA unique value for each Dual T1 Card in the chassis. The
value of dt1CfgIndex matches the value of the index for the
corresponding Dual T1 Card entity in the entity table of
the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.3.2.1.1.1 |
dt1CfgSpanATmgSrcPrioIdentifies the priority at which the clock recovered from
span line A is to be used as this Dual T1 Card's transmit
timing source.rw Enumeration .1.3.6.1.4.1.429.1.3.2.1.1.2 |
dt1CfgSpanBTmgSrcPrioIdentifies the priority at which the clock recovered from
span line B is to be used as this Dual T1 Card's transmit
timing source.rw Enumeration .1.3.6.1.4.1.429.1.3.2.1.1.3 |
dt1CfgInternTmgSrcPrioIdentifies the priority at which this Dual T1 Card's
internal clock is to be used as the transmit timing source.rw Enumeration .1.3.6.1.4.1.429.1.3.2.1.1.4 |
dt1CfgTdmBusTmgSrcPrioIdentifies the priority at which the clock currently on the
TDM bus is to be used as this Dual T1 Card's transmit
timing source.rodeprecated Enumeration .1.3.6.1.4.1.429.1.3.2.1.1.5 |
dt1CfgIdleDiscPattIdle disconnect pattern sent to the modems. Normal values:
USA = 1, international = 84. Default = 1. Configure the
modems identically. Consult the help screen, user manual
or US Robotics before changing.rw INTEGER .1.3.6.1.4.1.429.1.3.2.1.1.6 |
dt1CfgNumT1TypeNacsThe number of T1 and/or T1/E1-PRI NACs in the
chassis.
Default=multiple(3).rw Enumeration .1.3.6.1.4.1.429.1.3.2.1.1.7 |
dt1CfgCallEventFilterThis objects provides a means to filter the types of call
event traps generated. It specifies the class of calls to
filter out.
Default = filterOutSuccess(4).rw Enumeration .1.3.6.1.4.1.429.1.3.2.1.1.8 |
dt1CfgSetDs0OutofServiceThis object determines to put DS0s out of service upon
removal Quad Modem NAC when fixed modem routing method is
engaged.
Default = disable(2).rw Enumeration .1.3.6.1.4.1.429.1.3.2.1.1.9 |
dt1CfgWirelessModeThis object will configure the wireless mode of operations
of the T1 at power up. Default = normal(1).rw Enumeration .1.3.6.1.4.1.429.1.3.2.1.1.10 |
dt1Stat OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.3.3 |
dt1StatTableThe Dual T1 Card Status table contains an entry for each of
the manageable Dual T1 Cards in the chassis. It contains
objects that reflect the current card specific status.
Status values dynamically change during calls, and they are
read-only. SEQUENCE OF Dt1StatEntry .1.3.6.1.4.1.429.1.3.3.1 |
dt1StatEntryThere is one Dual T1 Card Status entry per Dual T1 Card in
the chassis. Dt1StatEntry .1.3.6.1.4.1.429.1.3.3.1.1 |
dt1StatIndexA unique value for each Dual T1 Card in the chassis. The
value of dt1StatusIndex matches the value of the index for
the corresponding Dual T1 Card's entry in the entity table
of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.3.3.1.1.1 |
dt1StatCurrentTmgSrcBased on the availability of the various timing sources and
the current settings of the priorities at which they are to
be used, the Dual T1 Card will select the current transmit
timing source. This object will indicate the current
timing source being used for transmit timing.ro Enumeration .1.3.6.1.4.1.429.1.3.3.1.1.2 |
dt1StatSelfTestThis object contains the result of the last self test
command requested from the command table. It includes both
destructive and non destructive results.ro INTEGER .1.3.6.1.4.1.429.1.3.3.1.1.3 |
dt1StatUpTimeThis object contains the uptime of the NACro INTEGER .1.3.6.1.4.1.429.1.3.3.1.1.4 |
dt1StatCallEventCodeThis object contains the definition of the call event codes
sent in the call event trap.ro Enumeration .1.3.6.1.4.1.429.1.3.3.1.1.5 |
dt1StatCallEventQ931ValueThis object contains the Q931 Call Reference Value sent in
the call event trap.ro INTEGER .1.3.6.1.4.1.429.1.3.3.1.1.6 |
dt1Cmd OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.3.4 |
dt1CmdTableThe Dual T1 Card Command table contains an entry for each
of the manageable Dual T1 Cards in the chassis. It
provides a means through which to take specific actions on
one or more Dual T1 cards in the NAS chassis. The number
of entries in this table is given by the value of
dt1IdNumber. SEQUENCE OF Dt1CmdEntry .1.3.6.1.4.1.429.1.3.4.1 |
dt1CmdEntryThere is one Dual T1 Card Command entry per Dual T1 Card in
the chassis. Dt1CmdEntry .1.3.6.1.4.1.429.1.3.4.1.1 |
dt1CmdIndexA unique value for each Dual T1 Card in the chassis. The
value of this object matches the value of the index of the
corresponding Dual T1 Card's entry in the entity table of
the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.3.4.1.1.1 |
dt1CmdMgtStationIdThis object is a generic read-write variable that a
Management Station (MS) can use to guarantee that the
results from a given command are the results of a command
issued by that specific MS. Each MS must SET a unique
value to this object when doing commands and GET the value
of this object together with dt1CmdReqId and dt1CmdResult
to detect interference from other MSs.rw OCTET STRING .1.3.6.1.4.1.429.1.3.4.1.1.2 |
dt1CmdReqIdThis object contains the value of the request-id field in
the SNMP PDU which invoked the current or most recent
command or test on this Dual T1 Card. If the request-id is
unknown or undefined, this object contains the value zero.ro INTEGER .1.3.6.1.4.1.429.1.3.4.1.1.3 |
dt1CmdFunctionThis object contains a value which describes the command
which is being invoked.rw Enumeration .1.3.6.1.4.1.429.1.3.4.1.1.4 |
dt1CmdForceIn some cases, the Dual T1 Card may be in a state such that
certain commands could adversely affect connections. In
such cases, a command request with this object not present
or set to noForce will result in a warning. If the
operator elects to ignore such warnings, this object can be
set to force in a subsequent issue of the command to cause
the command to be carried out regardless of its potentially
hazzardous effects.rw Enumeration .1.3.6.1.4.1.429.1.3.4.1.1.5 |
dt1CmdParamThis object contains parameters that are specific to the
particular command being issued. In some cases, there will
be no aditional parameters required.rw OCTET STRING .1.3.6.1.4.1.429.1.3.4.1.1.6 |
dt1CmdResultThis object contains the result of the most recently
requested command or test, or the value none(1) if no
commands have been requested since the last reset.ro Enumeration .1.3.6.1.4.1.429.1.3.4.1.1.7 |
dt1CmdCodeThe value of this object upon command completion indicates
a further description of what went wrong if the command was
unsuccessful. In the case of tests, a bit mapped result of
each of the sub-tests performed can be found in the status
table.ro Enumeration .1.3.6.1.4.1.429.1.3.4.1.1.8 |
dt1TrapEnaTableTable containing objects to enable traps on the Dual T1
Cards in the chassis. SEQUENCE OF Dt1TrapEnaEntry .1.3.6.1.4.1.429.1.3.5 |
dt1TrapEnaEntryThere is one entry for each Dual T1 Card in the chassis. Dt1TrapEnaEntry .1.3.6.1.4.1.429.1.3.5.1 |
dt1TrapEnaIndexA unique index identifying the Dual T1 Card to which the
trap enable objects pertain.ro INTEGER .1.3.6.1.4.1.429.1.3.5.1.1 |
dt1TrapEnaTxTmgSrcSwitchAn object which enables the SNMP proxy agent to generate a
trap upon detection of the Dual T1 Card switching to an
alternate transmit timing source.
Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.3.5.1.2 |
dt1TrapEnaCallEventThis object enables the generation of an SNMP trap to track
calls entering and exiting the NAC.
Default =
disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.3.5.1.3 |
dt1TrapEnaCallArriveEventThis object enables the generation of an SNMP trap to track
call arrivals the NAC.
Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.3.5.1.4 |
dt1TrapEnaCallConnEventThis object enables the generation of an SNMP trap to track
call connects.
Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.3.5.1.5 |
dt1TrapEnaCallTermEventThis object enables the generation of an SNMP trap to track
normal call terminations.
Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.3.5.1.6 |
dt1TrapEnaCallFailEventThis object enables the generation of an SNMP trap to track
failed call terminations.
Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.3.5.1.7 |